Display on Photosmart D6160 ink levels

Similar Questions

• On Photosmart D6160 ink level continues to Flash in Windows 7

  I have used my printer for a long time, I connected my printer and downloaded the latest drivers for Windows7 64 bit.

  When turn the printer on it began to clean the printerhead, once the inkt indicator continues to blink.

  Ore of printing can't do anything.

  HPPSdr and everythings OK.

  When I used the printer, the last time it worked fine (on XP)

  What now?

  Try to replace the cartridges. It could be that they are dry.

• Photosmart 8400: ink levels not displayed for photosmart x 64 in windows 8.1

  Printer works well, but I don't see maintenance information, now that I have a new PC with Windows 8.1, including ink levels.

  The printer is HP Photosmart 8400. How can I get the ink levels displayed, as well as other maintenance functions to operate?

  Hello

  Only one set of basic pilot is available for Windows 8.1, the HP Solution Center is not available for your printer on the operating system, so you cannot check the ink level of the HP software for your current operating system.

  You can check the level of ink on the front of the printer as shown in the following document:

  http://support.HP.com/us-en/document/c03848995

  Shlomi

• Photosmart 7260: Ink levels 7260

  Hello

  I just installed the latest drivers for a Photosmart 7260, the printer will show ink levels when printing when running on the old XP operating system.

  I can't find the old box to tools which was right click on the taskbar now on 8.1 MS.

  I tried right clicking on the icon in the control panel/devices and printers, passed through the right click menu without help.

  How can I check the ink level?

  Thanks a lot for any advice.

  Hi there @edintheclouds,

  You print the test page for the control panel local printers?

  

• Impossible to verify the Photosmart C6180 ink levels

  Can someone tell me how to check ink levels please.

  Hello

  It should be under the arrow to option on the right side of the screen :-)

• Since the switch from XP to Windows 7, I can't find a menu that allows me to display the window to check on my HP Photosmart C4180 ink levels

  Have tried to re - run the install disc, but he won't accept it.

  The printer works OK with all other normal windows showing otherwise

  This printer has windows 7 support go to the HP website and download the new drivers.

  You need to uninstall the old drivers.

  Also, go to start, right click on computer go to properties, advanced, hardware system settings, device settings - not allow me to choose and never install the driver from Windows update, save the changes.

  Turn on the printer but not brancher plug into USB port, install the downloaded driver and connect the USB for the guest.

• How to view ink levels c4780

  cannot find process to display on photosmart c4780 ink levels

  Hi dondiane,

  I understand that you would like to know how to check ink levels. Follow the steps in this document on the control of the ink levels. It gives you instructions step by step how check ink levels.

  Let me know if this helped.

  Thank you

• display for printer HP Photosmart ink levels in Windows 8

  How to display for my photosmart HP printer ink levels in Windows 8?  I could do easily when I used Windows XP but now I don't know where to find HP printer app and where information about the ink levels are stored.  Thank you.

  Hello

  What is the model of your printer? Function of your printer, you may be able to display his control panel.

  Kind regards.

• Photosmart D5460 all the ink level permantly indicates vacuum

  Photosmart D54600 ink with permanent show empty. and shows-ink displays date 18-02-2009

  Hi @Gibezzi,

  I want to help as best as I can with your Photosmart D5460

  Where is that you are checking the ink level?

  What operating system is on your computer?

  You are always able to print or it gives an error related to the ink?

  Once I have this information I can improve things for you!

  

  In support of Movember

• HP Photosmart D5360: check ink levels HP Photosmart D5360 and use Windows 8.1

  check the ink levels HP Photosmart D5360 and use Windows 8.1; Windows 7 has a HP Solution Center but Windows 8.1 is not?

  Hi @torbay,

  By your post, I see that you have no software to verify the printer ink levels using Windows 8.1. I would like to help you today.

  I checked online and there is a software HP Photosmart full feature and driverswho should still support the printer services. If you use the old or Windows Update drivers, remove them and install the latest drivers.

  You can also download and run the print and Scan doctor, it can predict the ink levels and services available for the printer. HP printers - help print and scan the doctor for Windows to solve printer problems. Go to the section how can I use the services of diagnosis and cleaning of printer?

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• How can I find the ink levels in the Photosmart D110 series?

  How can 8.1 Windows, I find the ink levels in the Photosmart D110 series?

  Ink levels can be checked from the front as shown in the document here.

• Don't see the tab for the ink level estimated for Photosmart 1315 after reinstall.

  Of my Photosmart 1315 resinstall.  After graduating with a caveat that my ink level is low - I opened to the Toolbox to see ink estimated level to see if it was the color cartridge or the black print cartridge and the tab did not exist.  I have seen before.  The only tab I see now is peripheral Services.  Don't know what happened.  How do you get the back estimated ink level tab?

  Operating system is Windows XP.  I just found out what the problem is.  My computer has recently been setup so that there are 2 types of users - administrator and limited user.  I do all my work as a limited user and why am not able to see the tabs other than the Services of the unit, when I opened the box tool.  When I log in as an administrator, I am able to see all the other tabs.

• Photosmart HP 6520: Ink level difference between HPApp and printer

  Upgrade from Windows 7 to Windows 10.  HP Desktop app that shows the ink tank, analysis of the characteristics, maintenance of the printer etc was not compatible with window 10 while it was necessary to download HPA10 compatible remote Windows 10 app printer... This application displays the ink from the printer as being complete however; the ink printer display window icon displays the printer as being low on ink.  Tried to restart the printer and restart the computer but the problem persists.

  Welcome @Sistafatti,

  Thanks to their participation in Forums of HP! I see by your post that the ink levels are not the same. I will definitely do my best to help you.

  I would check the ink levels in the printer for a more accurate reading: check ink or Toner levels. Go check in the printer control panel menu. Ink level warnings and indicators provide estimates for planning only.

  If the printer is on a network, check the ink levels of: the printer Web server integrated. Simply type the IP address of the printer in the web browser Internet Explorer.

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!

• Photosmart 7510: low ink levels

  The documents are very low when printing. The ink levels are good I have the extra large black cartridge but the printer does not appear to see this!  I cleaned the cartridges more aligned with the printer but the print quality is still poor. How can I fix this.

  Hi @cgc1 and welcome to the Forums of HP!

  I understand that you are having print quality problems.  I would like to help!

  I recommend starting by removing the ink cartridges and perform a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend this document on the problems of quality Print to the HP Photosmart 7510

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Problem: cannot display the ink levels

  I can't view the ink levels.  Customer support can't help.  Use the Windows 7 operating system

  Have 'obsolete' HP PSC 1410 All in One

  Always had HP Solution center which I did more.  IT seems that there was an update of software and no tab displays ink levels.  I printed sheet test that was worthless.

  Customer support says that they have no support or the pilot of this old machine.  I have my original disks, but my computer will not allow him to run because he has XP

  Please let me know if there is a way that I can see my ink levels or to get around this problem

  Thank you!!!

  If you have not already installed for this printer, and then try to download and install the latest drivers for the PSC 1410 all-in-one on the HP site.

  These can be found here. There is also a document located here, with information on how to check this model of printer ink levels.

  If you have already had a previous driver for this printer is installed, you will need to uninstall the old software and install the latest version.

  Let me know if you are able to view ink levels with software installed from this package.