Display region report columns in the correct order
I have a report of area in which the first 4 columns that are displayed are listed at the end of the section "column attributes.Why is this happening? Another setting must be done to make them display at the end, I would like to?
Run the report.
Click on the "Speed" control in the interactive report.
Select the option "select columns".
The top & arrows in the control as a result to arrange the columns in the desired order.
Click 'apply '.
Click on the "Speed" control in the interactive report.
Select the option "save report".
Save the report as the "default report settings"
Tags: Database
Similar Questions
-
What is the correct order of network provider
original title: network provider order
What is the correct order for network providers.
my choices are:a. provide Dell Wireless WLAN Card LogonServer Desktop Session host remote M/Soft b.c. Web Client Network andd. M/Soft Windows network...Hello
The order of network providers can be changed according to the requirement. I suggest you to see the following link on the change of the network adapters.
Modify the protocol bindings and the network provider order
http://TechNet.Microsoft.com/en-us/library/cc732472 (v = ws.10) .aspx -
What is the correct order of installation between Siebel - Apache?
Hi, I have a Siebel architecture with an Apache web server. I wanted to confirm the installation order, that is to say, I install Siebel Enterprise, Siebel server and the gateway. After that, install the Apache web server and, finally, the Siebel Web Server Extension. This is the case? This is the correct order? or should I change a component of the place?
Thank you very much
Kind regardsIn siebel 8.1.1 first you install Gateway Siebel and Siebel Enterprise Server, install Siebel server, install the configuration DB utilities, create DB Siebel and install Siebel Web Server Extension (SWSE). If a Siebel DB is not already created, see doc below for more details and considerations:
http://docs.Oracle.com/CD/E14004_01/books/SiebInstUNIX/SiebInstCOM_InstSES3.html#wp2367737
http://docs.Oracle.com/CD/E14004_01/books/SiebInstUNIX/SiebInstCOM_InstSES9.html#wp2367945The Web server must be installed before installing SWSE. Make sure that you use a supported apache based web server:
http://docs.Oracle.com/CD/E11886_01/V8/core/SRSP_81/SRSP_81_ServerEnv8.html#wp1013532
Thank you
Wilson
-
Card rules do not run in the correct order
Hello
I am using FDM 11.1.2.1.
I imported data and used the card rules: mapping was not what you expected, so I had to modify the sequence of the rules on the map.
So I updated the sequences of the rules on the map and re-validated (even re-imported) = > I still have the same problem: the card rules do not run in the correct order.
Below is an example of a line imported with this problem:
Export of the import mode:
PARTITIONKEY | CATKEY | PERIODKEY | ACCOUNT | ENTITY | AMOUNT | * UD5 *.
749. 12. 2011-03-31 00:00:00 | 60413031 | MM31N0 | 773. * 000000 *.
Rules of the card for the dimension of the UD5 (exported from FDM) (sorry it is not well presented :-/))
%{DIMNAME/} SRCKEY SRCDESC TARGKEY WHERECLAUSETYPE WHERECLAUSEVALUE SEQUENCE VBSCRIPT PARTITIONKEY
749 UD5 MTN424 project MTN424 MTN424 1
749 UD5 R_PROJ_AXMECH project AXMECH #SCRIPT IN * 2 * ' * If Left (varValues (15), 2) = "" MM"" Then. "
* Result = ""AXMECH *"
Else if varValues (15) = "" MSIND0"" Then
Result = ""AXMECH"
Else if varValues (15) = "" MSTLP0"" Then
Result = ""AXMECH"
End If '.
UD5 749 * 000000 * project undefined PROJET_NON_DEFINI * 3 *.
749 UD5 R_PROJ_AUTRES other projects * AS * 4
If despite the sequence 1-2-3-4, the UD5 000000 is mapped to PROJET_NON_DEFINI (rule explicit map with sequence 3) instead of AXMECH (IN the rule of the map with sequence 2).
Thanks in advance for your help
FannyThe card sequence numbers have effect in a single mapping type (Explicit, between, in, analogues), not through multiple types of mapping only. Explicit cards always take precedence.
-
Display element should be displayed after report and before the button
Hello
I use apex to oracle 10g 3.2.
I created a region with report, hidden item, display only point and a single button.
Now, I want to report is displayed first and then show only, then the button.
But somehow the item displayed is displayed first then report and then the button.
What to do to change?
Thank youMake sure that the point of view from the region is one of
Body of page template (1. elements located under the content area)
Body of page template (2 items below the content of the region)and is not
Body of page template (3 items above content area)
This is the part ' elements above/below the content of the region "who controls where are display the elements of the region.
-
Documents do not print in the correct order.
I try to print hundreds of documents using a command Station fiery; However, the documents do not leave my machine in the right order and then get printed in the wrong order.
For example, document 05 will print everything first, followed by the 10 document, then the document 01.
How can I force documents to be wound in their correct order (01,02,03, etc.)?
Hi KyleDumond,
In the face of the issue only when you use Fiery Command WorkStation?
You can check if you can print from Windows without any problem. You try to print documents from 10 to 15 at a time and check what is happening.
For more information, refer to article:
If you are not faced with the question, so you may need to get in touch with support Fiery Command WorkStation to get help:
-
How to extract values of classic report column in the text element
Hi all
I've created a classic report (select id, name,' < input type = "button" value = "add" id = "add" name = "add" > "as" add details "details ;) with a single column as column values want link.i in the text element when I click on the link of that particular record of the report)
(1) in the link this link column property I've specified the URL as [javascript:insert_in_table(#ID#,#NAME#)]
(2) text two article P_ID, P_NAME
(3) in the header of the page, I've specified as javascript
< script type = "text/javascript" >
function insert_in_table (id, name) {}
var regId = ' #detail #'.substr (1);
var req = new htmldb_Get (not null, $v ('pFlowId'), 'APPLICATION_PROCESS = add', $v('pFlowStepId'));
Req.Add ('P_ID', ID);
Req.Add ('P_NAME', Name);
forced. GetAsync (function () {}
If {(p.readyState is 4)
$a_report (regId);
}
});
}
< /script >
(4) created a (add) process whose point: on demand, run this process when requested by ajax
pl/sql: insert into name_detail (id, name) values (: P_ID,: P_NAME)
now the problem is I m not getting the values of column in the report in the text element, it only shows white.
Kind regards
Ketan
Hello Ketan,
Assuming that you want to insert the values into the table, this is why you want to set values for the element,
If this is the case, then no need to define values for the element to insert.
Follow the steps below, it is one of the embodiment of your condition.
Step 1: Put the code below in your classic report query
assuming that the id is of type number and the name is of type varchar, that's why I am attaching the name to apostrophe, see line 3
select id , name , '' as "Add to detail" from detail
Edit 'Add details' column-> column attributes-> view-> column of Standard report
Step 2: Create a process in the processing of the Page
Name: INSERT_DATA
Address the point: on demand, run this process when requested by ajax
Process: putting the code below
Declare P_ID number ; P_NAME varchar2(50); Begin P_ID := apex_application.g_x01; P_NAME := apex_application.g_x02; insert into name_detail(id,name) values (P_ID,P_NAME); End;
Step 3: Create a java script function to call your insert ajax process.
Change the Page-> the function and the global variable declaration-> put the code below
function insert_in_table(id,name) { apex.server.process ( "INSERT_DATA", { x01: id,x02: name }, { success: function( pData ) { } }); }
Hope this helps you,
Kind regards
Jitendra
-
How can I make my iPod Nano (7th generation) read albums in the correct order?
I just bought a new Ipod Nano (7th generation) and synchronized my entire library.
Now I want to listen to an album, but it seems that this system is unable to sort the pieces by number.
Some are in good order, while other aren´t and when you listen to an album, it's really the most
annoying as I ve ever had with any mp3 player.
I looked for a possible system behind this and everything that I could find was, which instead of the title number the
titles are sorted by add date. Is it possible to fix it?
In addition, a way to contact support directly without having to CALL them?
Sorry, but with a system that I had to pay € 150, this shouldn´t certainly happen...
For a general context, see grouping of tracks in albums . Albums play in the wrong order when metadata numbers or sort of disk are set inconsistently. Playlists in iTunes can also be set to play in a different order than shown that can sometimes be confusing. Album by artist upward is usually the most sensitive order and can be copied to the reading order by right-clicking on the name of the playlist in the sidebar once you have set up.
TT2
-
This question is requested based on certain issues I'm having with the Zune software. specifically in the software of pointing to the correct location for listening to music I own that was torn through CD. Currently, all the added music in this way shows the location of each song as E: in the properties of the song. I went back to the score zune software to the right location (for example settings-online collection => by adding the name of the place where the music.). The negative result is that I can't play full songs for music I own. Instead, Zune software plays the second.30 preview for each. Is this a problem of Zune, Vista or Western Digital external drive problem? Why Vista would recognize the location of the reader out of sequence. Please notify. Thank you
Hi Freddie,.
You can try to change the E: drive letter and check.
For more information, you can consult the following article:
-
do not put the titles in the correct order by tearing
When you use the windows media player for RIP a cd on an external hard drive, it seems that the tracks are being ripped off properly but when I check the folder on my hard drive to make sure it was ripped I find that the tracks are not in the right order.
Hello
Organize your music depends on how music files are named. The music files that begin with numbers are first kept (0 to 9) then Alphabets (a-z). Here the music files are mixed up and it's automatic.
Also I suggest to check the following links and check if it helps.
Change settings for ripping:
http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music
Rip music from a CD:
http://Windows.Microsoft.com/en-us/Windows7/rip-music-from-a-CD
Rip music: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/rip-music-frequently-asked-questions
Hope this information is useful.
-
Limit the number of characters displayed in a column in the reports
Hello
I have a few very large text stored in one of the fields in a table... View all reports (view), I don't want to display the content of the whole field, I want to show the first 50 characters of the field...
Kind regards
Mayura B.T
Why not just use substr in your select?
-
ToolTip for the report header classic of report column using the PL/SQL function
Good afternoon
I need to add tooltips to my report header, when a user points to the topic title column I need to display the full title.
Theme 101, Apex 4.2, Oracle 11g
code below:
{code}
DECLARE
CLOBL V_HEADINGS
vusr VARCHAR2 (5);
V_ERR_MSG VARCHAR2 (15);
BEGIN
SELECT SME_C
IN vusr
OF SME_LU
WHERE SUPERIOR (SME_LU. SME_USERID) = v ('APP_USER');
V_HEADINGS: = ' ';
SELECT 'UTC' |': ' |' UIC' | ' :'|| SUBSTR (HEADING1, 1, INSTR(HEADING1,'-',1)-1) |': ' | TITLE2 |': ' |' TITRE3 |': ' | CHAPTER 4: ': ' | ... AT HEADING25
IN V_HEADING
OF FORCE_GEN_UNIT_REPORT_HEADINGS
WHERE FORCE_GEN_SME_CREATOR_C = vusr;
RETURN V_HEADINGS;
EXCEPTION
WHEN NO_DATA_FOUND THEN
V_ERR_MSG: = ' ';
END;
{code}
The header will display like this 4.1 4.0 MCT MCT...
The substr () /instr () in the first section, that's what I want to display. I looked at other messages and I am confused on how to do it. Any help is greatly appreciated.
Thank you
Mary
It's the great Mary.
Please report the thread as "Correctly answered" so that others can benefit from this information.
Thank you
-Jorge
-
What is the correct order to install Win7 to Satellite P750-103?
Hello
I'm going to do a clean install on my laptop with Win7 x 64 and I would like to know if there is a specific order to install the driver and if there is a way to download all in one package (zip or other) or if I really need to download one at a time in the support page. If Yes, what Bluetooth driver I install: when I try to download that one I m re-directed to another page with a lot of them
Thanks for the help
Order of installation is very important for a successful OS installation. All the necessary drivers, you can find on the download page of Toshiba. Unfortunately, you have to download and install one by one. Toshiba doesn't offer a sort of all in one package.
Order of installation is as follows:
Win7 64-bit SP1
PatchFiles V1.0
TOSHIBA Assist 4.02.02
TOSHIBA Bulletin Board 2.1.10
TOSHIBA ReelTime 1.7.17.0
SW 9.2.0.1015 Chipset installation utility
Intel Management Engine Interface V7.0.4.1197
Driver Intel 8.15.10.2353
267.44 NVIDIA display driver
Driver Intel Rapid Storage Technology 10.1.2.1004
Utility 1.63.51.2C TOSHIBA supervisor password
TOSHIBA HW Setup Utility 1.63.1.34C
1.63.0.12 TOSHIBA Flash Cards Support utility
TOSHIBA value added package 1.5.4.64
NVIDIA HD Audio Driver 1.1.13.1
Audio Realtek Driver 6.0.1.6305
TOSHIBA 1.0.3 Wireless LAN indicator
Wireless LAN driver
Synaptics Touch Pad Driver 15.2.11.1
TOSHIBA HDD Protection 2.2.1.13
Atheros Bluetooth Driver Package v1.0.4 Filter
Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
Realtek LAN Driver 7.038.0113.2011
JMicron 1.00.57.02 card reader
ENE CIR driver V3.2
Tuner DVB-T/ATSC YUAN V2.3.3.41 driver
USB3.0 Driver 2.0.34.0
TOSHIBA Sleep 1.4.2.7 utility
3.1.9 TOSHIBA face recognition
TOSHIBA eco Utility 1.2.24.64
Intel Proset 14.0.2.0.1.s64_wCAT
TOSHIBA HDD/SSD Alert 3.1.64.8
TOSHIBA Service Station 2.1.52
2.0.0.7.64 HDMI Control Manager
Remote control TOSHIBA 3.0.6.1 Manager
TOSHIBA PC Health Monitor 1.7.5.64
ConfigFree 8.0.37rev.2
TOSHIBA Web Camera Application V2.0.0.19
TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
Intel Wireless Display 2.0.29T2
PatchFiles PCIIDEREG - 1.2
PatchFiles TosVolRegulator_x64_1.1Good luck.
-
Tecra M7: What is the correct order to install drivers Vista
Hello
after Vista fleeing RTM on my Tecra M7 Tablet and using a mixture of XP and Vista drivers, I decided to rebuild my machine.
However is - that someone could advise on the order in which the Vista drivers must be applied when Vista is back on?Kind regards
Rhys
Hello
As you can see the document of instructions for installations is unfortunately not available but you can try to install it on this way:
OPERATING SYSTEM
Display driver
Audio driver
Driver modem
touchpad driver
Flash media driver
Value Added Package
Tablet PC Extension Package
Support Button
Config Free
And so on...I hope you will successfully install OS.
-
How can I display folder size column in the Windows 7 Explorer?
I looked everywhere for the addition of the column to display the size of the folder under Windows 7. When a folder is deleted to the Recycle Bin, the file size is indicated in the column 'Size'. How to imitate recycle them bin settings for Windows Explorer display all?
This is supposed to be a resource drag, so it has been deleted.
There are other third party utilities compatible with win - 7 listed here.
http://www.SevenForums.com/general-discussion/26640-folder-size-Windows-Explorer.html
If you use the arrow keys, the description of popup / ToolTip is displayed automatically, without the use of a mouse to hover.
Maybe you are looking for
-
Hello! I read the articles on access distance to another mac, but what I need is to remote access to files on airport time capsule without a great second computer mac at home.
-
Low disk space on the Windows XP computer.
Original title: clean C disk, compress files. I'm low disk space and need to Defrag. When I clean disc - the same 2-,-is still there. No matter what I do, I always only 7.1% of free space on my C drive. How can I get more space?
-
Vista boots with a black screen after login
I can ctrl > alt > del to bring up the TaskMan window only, then on the file Menu, new task and run the Explorer, this action puts the desktop and the taskbar on the screen. The Explorer at the time runs as a file owner verses a system file in the ms
-
Try to buy a Macbook pro for first. But running into problems
OK long story short, I'm a student at Ithaca College edition. I need to buy a mac book pro, so I can edit from home, rather than rely on the school computer labs.I'm looking on the apple site. The macbook 13 inch pro without screen retina can be cust
-
Transfer error! Click 'Retry', or call customer service.
As the title says I have problems with my CC.I use it at work and at home for some time, it works perfectly since I got it, but somewhere around 2014 update stopped working at home. I really have no idea what is past and the person who tried to suppo