display sleep

Similar Questions

• 15-r030nr HP: HP 15-r030nr display/sleep problem

  
  

  Hi SDF15,

  Sorry I'm a little late getting back to my answer.  I tried to remove and reseating the connections screen, but had no luck.  Try a few other things, I noticed that when I applied pressure on each side of the switch and moved the display cover in both directions, the problem did not happen.  I ordered a new one from the power button and installed and which corrects the problem.  Search the old of the power button, I noticed that the ribbon cable that attached to it was loose and perhaps has not been in contact with the power button.

  Thanks for your help!

• Display sleeping all the time

  I thought that it was a question of Win7 but Microsoft sent me here. My computer turns off the display within one or two minutes of inactivity. I changed the settings to never. I changed again and rebooted. I changed it to no password required on wake. Nothing seems to affect it. He's still asleep and always requires a password. I got lost.

  Is this something proprietary software (which seems to suggest that MS')? Any help appreciated.

  UPDATE - I ran a convenience store Windows Power who told me 'never' was too long and "fixed" for me. Surprisingly, after that, my choice not including no password started working.

• display (sleep setting does not)

  Hey I have a problem affecting sleep in my laptop. I PUT THE day BEFORE for "at the end of 2 MINUTES", but the arrival of 2 minutes, my laptop does not sleep. Ive tried several times but still my laptop don't turn to sleep

  Hi SCHAUBER,.

  What operating system do you use? Links to documents troubleshooting base with good information on mode 'sleep' and things to check if it does not work:

  Windows 8

  Windows 7

  Using a wireless mouse? Sometimes mode 'sleep' will work correctly with some wireless mouse. I hope this helps!

• display sleep after 1 minute, how can I increase it?

  view sleeps after only 1 minute.  How can I increase it?

  Some here have the same complaint - usually is that the screen saver is set to one minute and none are selected.     Right click on desktop, choose personalize, and bottom right of the window that opens is the screen saver settings.

  Or it could be that your Sleep function is defined on a minute... which these parameters are Power Options in Control Panel.    But you said "show" and did not say that his sleep and the lights will Flash.

• hot spot sleeping Mac Pro not working

  After the installation of El Capitan, I find that I can start is no longer the screen saver slide show, although the hot spot / corner functions properly to begin the Mission control, table edge, Notification Center, office and Application Windows. It also makes display sleep, so everything EXCEPT run the screen saver works.

  The version of the OS is 10.11.5.

  Open system preferences > desktop and screen saver > select screen saver > do you have the first definition after FOREVER. If yes change in 5 minutes and check the show box with clock.

  Select the screen saver > click Preview and select shuffle slide order.

• Yosemite 10.10.5 sleep bug?

  I got a reproducible bug pop up for several weeks I saw a few months ago.

  If my Mac Pro mid-2012 falls asleep on his own under energy-saving, or I put on standby for a period of extranded, it will go to the black. But when I try to wake him up to the top... the screen is all 'hash', nothing and the keyboard don't wake him and the computer does not respond to uo wake orders.

  I have to physically press the power button until it turns off completely and then restart it.

  It starts with the warning, it has not been closed correctly and takes some time to restart.

  What happens, why it becomes inadmissible and why the screen is filled with "static/hash" and no picture?

  If I put it to sleep and wake up after a few minutes, it seems fine.

  Maybe it's a bug with sleep and the hard disk stops after a few minutes of inactivity?

  But under power settings I have checked "never" for the computer sleep and display sleep, but have power saving ' also to sleep as much as possible to put"checked.

  Ideas, suggestions?

  If you have a model 15 "then see this: 2011 MacBook Pro Extension program repair the graphics issues.

  If your model does not have the requirements of the above, then you can consider that there is a software problem. The best way to test this is to install a new copy of Mac OS X on a different disk. Start and use this copy for a short period of time stable if it has problems with sleep/wake. If it is not then you have a problem with your third-party software. You can install one at the time and test each one before installing another.

• Command delay AppleScript in display-asleep

  Hello

  I would look for a way to run a script at midnight - NOT on a calendar. For example, I want to do the following:

  delay 10000 -- assuming 10000 seconds to midnight

  activate the application "Notes".

  tell application "System Events" to keystroke "Test"

  The problem is that when my display sleep (the computer is not sleep), the delay control is stuck. Any help is greatly appreciated. Thank you!

  Are you really sure you want to exit a script running & hope that it will work?

  Personally I would forget about the timer, set the script to be triggered by a calendar event instead.

  1. Save the script as an Application in the Applescript Editor.
  2. Add an event to the time you want in the calendars, set an alert, with "Open File at the time", choose custom: & add your script.

  I think that the calendar will be reliable Mac hoping moe keeps the running script, it can wake the Mac - I test only.

  Calendars also makes it very easy to reschedule.

• External monitor is no longer wakes from sleep (10.11.2 updated)

  I have a LG external LCD - LED group connected to my Mac Pro via HDMI 2013.

  No problem with no display at all before sleep... but since the 10.11.2, update it just don't wake up from his sleep and I have to force a reboot. I've since turned display sleep off options and I now use a screen saver protected by password instead (of security) and simply turn off my screen with the power button.

  I had this problem too with the Beta 2 and Beta 5 from 10.11.2. Both times I started 10.11.1 Time machine, hoping it would be fixed in the final version.

  Before that everyone says, the following link is not welcome... I has not come down in the last shower: If your Mac does not sleep or wake up when expected - Apple Support

  It's certainly something that has changed in El Capitan 10.11.2. I now have a beast + $10,000 a computer that can not put its own screen of sleep

  Exactly the same problem with my mac pro and panasonic plasma hooked up via hdmi. Worked fine before the update. Now, if I turn off the monitor, I have to reboot to get the screen to display an image, once it comes back on.

• Random sleep and black - video screens attached number W520

  BTW my mobo, cpu, memory I think were all replaced last time I took with this problem...

  Always do consistently:

  Random black screens and sleep at random:

  www.YouTube.com/watch?v=AvWl9ck26xI

  Black screen:

  www.YouTube.com/watch?v=7A3NqnC80iU

  Before I thought maybe its associated Bluetooth that sometimes when the screen turns black, then come back, I would get a "Bluetooth Device not detectable". Then disabled Bluetooth in the BIOS, but still display/sleep problems.

  I removed the Lenovo Power Manager/PM driver and off to sleep in windows power settings (in every setting including low battery Action). Any ideas?

  I just upgraded to a guarantee of 3 years (the more expensive one), should I just ask to replace mother/cpu/memory card yet or will Lenovo actually test for further questions?

  Thank you

  ARI

  So after going to Lenovo, the 3rd time seems to be the charm. They said it was a connector crimped in the laptop, the cause of these issues. I don't think that I had real problems with the laptop from back 2 weeks.

  -Ari

• How can I leave the program runs longer than the duration of sleep?

  I have a desktop Pavilion Elite HPE - 110 t (win7) .  Turn off display & sleep have the default value (10 & 20 minutes).  According to the instructions that I read (somewhere in the paper documentation) when I got to the computer a few months ago, I do not turn off it during the night.  I think included grounds for diagnostics to run (by default grid) & I "think" I've seen (the next day) scans messages, updates, etc. have been executed.  I however turn off my modem to prevent the activity internet auto (anyway) during the night.

  This configuration has been satisfactory until this morning, when I tried to leave an app running I knew would require more than one hour to complete.  I had other non-computer tasks to do & did not sit the computer baby to keep him awake.  In fact, I thought that 'activity' (including the activities of memory without keyboard activity) he would keep awake.

  To my surprise when I got home 3 hours later, treatment stopped about 45 minutes after the start.  This was determined by the timestamps of the output files.  Normal processing resumed after that I have he awakened from his sleep.

  Is there a way (outside change go-to-sleep time setting each time) to allow work of long-term programs/application to keep running & to go to sleep after the treatment is finished? Am I wrong to think that 'auto diagnostic' are running when the computer & I sleep at night?

  Thank you

  The process will continue even after the monitor goes to sleep.

  I first noticed this problem when you make copies of images hard drive hard drive.

• Auto-Sleep does not work then in the lock screen

  As the title says, I set automatic standby after 30 minutes of idle time of the computer, but it only works when I'm on the desktop, if I'm not connected (lock screen), auto sleep does not work, how can I solve this problem?

  Hello

  A power plan is a collection of hardware and system settings (such as the display, sleep, etc.) who manages the way your PC uses power. Lock screen the console after the deadline option must be added to the advanced power settings.

  Change power management and check.

  Power plans: frequently asked questions.

  http://Windows.Microsoft.com/en-in/Windows/power-plans-FAQ#1TC=Windows-8

• end of 2011 MBP stops when unplugged

  Hello, my MBP end 2011 (on 10.9.5) was most recently at apple, the logic board has been replaced. shortly after that I came back, he began to stop once unplugged. Re-start works, but only for a minute. system report states that, whatever it is the air out here? Sounds like a battery problem, I'm on the original battery, but I thought battery would just shrink, not just stop working.

  Information model:

  Serial number: D8 * LAZ

  Manufacturer: SMP

  Device name: bq20z451

  Pack Lot Code: 0

  PCB batch number: 0

  Firmware version: 406

  Review of equipment: 2

  Review of cells: 158

  Information on this charge:

  Charge remaining (mAh): 6432

  Fully charged: Yes

  Loading: No.

  Full Charge capacity (mAh): 6433

  Health information:

  Cycle Count: 405

  Condition: Normal

  Battery: Yes

  Amperage (mA): 0

  Voltage (mV): 12484

  Parameters of power system:

  Alternating current:

  System timer (min): 0

  Disk sleep timer (Minutes): 0

  Display sleep timer (Minutes): 30

  Wake up on the evolution of the ca: No.

  Wake up to the opening clamshell: Yes

  Wake on LAN: Yes

  Current generator: Yes

  View Sleep uses Sun: Yes

  GPUSwitch: 2

  PrioritizeNetworkReachabilityOverSleep: 0

  Waiting period: 4200

  Standby mode enabled: 0

  Battery power:

  System timer (min): 15

  Disk sleep timer (Minutes): 10

  Display timer (min): 15

  Wake up on the evolution of the ca: No.

  Wake up to the opening clamshell: Yes

  View Sleep uses Sun: Yes

  GPUSwitch: 2

  Reduce the brightness: Yes

  Waiting period: 4200

  Standby mode enabled: 0

  Hardware configuration:

  UPS installed: No.

  Charger AC/DC Information:

  Connected: Yes

  ID: 0X0100

  Wattage (W): 85

  Review: 0x0000

  Family: 0 x 0085

  Serial number: 0 x * 4bd

  Loading: No.

  < personal information under the direction of the host >

  Hello marc cardwell,.

  If your MacBook Pro stops unexpectedly when you unplug your charger (despite correctly recognizing your installed battery), it can help restore his MSC and NVRAM.

  Reset the management system (SCM) controller on your Mac.
  https://support.Apple.com/en-us/HT201295
  

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  Sincerely

• Battery is not charging and emptying while it is connected and in use

  Hello world

  I have a macbook pro 15 "mid-2015 retina, charge the battery only when the mac is sleep is deactivated or not in use, the battery status is normal and it takes about 8 hours to empty completely, but when it gets to 0% mac stops (no sleep) and won't turn on until battery is charging a little

  I bought a new magsafe2 on apple store 85W adapter, reset the smc and Landau, Polish ac port... nothing has worked...

  Because now I can't take it for repair, apple repair service are too far away from my town, my city, there are just apple store without repair service.

  What causes this problem?

  Here's the info of the battery:

  Battery information:

  Information model:

  Serial number: D865376Y578FWLKA6

  Manufacturer: SMP

  Device name: bq20z451

  Pack Lot Code: 0

  PCB batch number: 0

  Firmware version: 702

  Review of material: 1

  Review of cells: 3241

  Information on this charge:

  Charge remaining (mAh): 4607

  Fully charged: No.

  Loading: No.

  Full Charge capacity (mAh): 8586

  Health information:

  Cycle Count: 196

  Condition: Normal

  Battery: Yes

  Amperage (mA):-944

  Voltage (mV): 11478

  Parameters of power system:

  Alternating current:

  System timer (Minutes): 1

  Disk sleep timer (Minutes): 10

  Display sleep timer (Minutes): 10

  Wake up on the evolution of the ca: No.

  Wake up to the opening clamshell: Yes

  Wake on LAN: Yes

  Delay AutoPowerOff: 14400

  AutoPowerOff enabled: 1

  Current generator: Yes

  DarkWakeBackgroundTasks: 0

  View Sleep uses Sun: Yes

  GPUSwitch: 2

  Hibernation: 3

  PrioritizeNetworkReachabilityOverSleep: 0

  Waiting period: 10800

  Standby mode enabled: 1

  Battery power:

  System timer (Minutes): 1

  Disk sleep timer (Minutes): 10

  Display sleep timer (Minutes): 2

  Wake up on the evolution of the ca: No.

  Wake up to the opening clamshell: Yes

  Delay AutoPowerOff: 14400

  AutoPowerOff enabled: 1

  DarkWakeBackgroundTasks: 0

  View Sleep uses Sun: Yes

  GPUSwitch: 2

  Hibernation: 3

  Reduce the brightness: Yes

  Waiting period: 10800

  Standby mode enabled: 1

  Hardware configuration:

  UPS installed: No.

  Charger AC/DC Information:

  Connected: Yes

  ID: 0X0AA1

  Wattage (W): 85

  Family: 0 x 0085

  Serial number: 0x00b56abd

  Loading: No.

  First, I would try to isolate the problem. As is the shipper at fault or the MacBook.

  A simple way to test this is by plugging the charger into a MacBook so, if you have a.

  You can also check here If your adapter doesn't charge not your MacBook (retina, 12 inch, early 2015) and later - Apple supported

  And here, reset the management system (SCM) controller on your Mac - Apple Support

  Hope this helps, good luck to you.

• HP 10 G2: Eve of the screen is not together

  My Android Tablet keeps back sleep after 15 seconds on inactivity. Will define no higher.

  Hi there @rfdguy1949,

  Welcome to the Forums of HP Support!  I understand that your tablet is not either remember or know the parameters of your sleep.  I'm happy to give you a helping hand with this.

  You can check under settings > display > sleep and see if there is the possibility to 'never '.

  If this option is not available, you can try settings > Developer options > stay awake. This will keep your Tablet awake while it loads. This could be useful if your Tablet does not support the screen timeout '' never. ''

  Note: If you don't see Developer options in settings, it may be made available by going to settings > topic > Build number. Developer options must appear after typing the number of version several times.

  Please let me know if some of these work for you and if it doesn't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.