How to find and use the video converter total already installed on my windows7 pc toolbar

Similar Questions

• How to find and use the "disposable" email addresses

  Sometimes, I get a notice at the bottom of the screen that I can use disposable or disposable email addresses if I don't want to use my regular. I don't know how to do this in the help sections.

  You may specify where you see these messages? Firefox and Mozilla don't provide no e-mail services, but you can use something like gmail, simply create an email address at which you care and use that as a "disposable" email address.

• How to find and use the background textures in a paper or a poster?

  I'm looking for other than just flat color textures, or gradients.  Textured background would work well for a poster I've created.  How can I find these to be included in a Pages document?

  I'm also looking for interesting fonts.  How can I find the fonts other than those supplied with Mac OS x?

  You already have your browser open:

  Search for Textures and fonts.

  OSX accepts the format of any graphic that handles Quicktime: .eps, .gof, .jpeg, .pdf, .png. AI. PS and more

  OSX accepts the following font formats: .ttf, OTF, Type 1 Postscript. The best is .otf.

  Peter

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• How to find and delete the dupes in Photos

  How to find and remove the many dupes in Photos

  Duplicate Finder in the App Store will clean the photo library. However, I would be careful to make sure that nothing is really a duplicate.

• How to activate and use the built-in webcam

  built in webcam

  How to activate and use the built in webcam on my desktop Dell Inspiron 1?

  MikeViklund,

  Try to read...

  Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software

  Rick

• where to find and use the (HCL) hardware compatibility list for Windows xp3

  Original title: where to find and use the Windows (HCL) hardware compatibility list

  HCL for Windows xp3

  That does not "response" from MS Support Engineer Umesh was particularly useless.

  Unfortunately for you, the HCL XP (or Windows Catalog or Windows Marketplace or whatever it is renamed) no longer exists.  I guess Microsoft is not particularly interested in letting you know what the material is compatible with an operating system that is no longer, it sells and supports only.

  The trail begins here: "the latest Windows XP Hardware Compatibility List" (314062 KB) that leads to theWindows 7 Compatibility Center.  KB 314062 is also linked to the http://www.windowsmarketplace.com/ which used to have a list of compatible with XP hardware and software, but now redirects to the Microsoft store, another dead end that XP is concerned.

  If you really want to dig, your best bet is probably used the Wayback Machine (archive.org) looking for old copies of

  http://www.microsoft.com/whdc/hcl/default.mspx - but a lot of links are broken or "not supported" unless you use Internet Explorer 6 (the message claims 6 'or more' but 8 does not work).

• Data Modeler: how to create and use the collection type

  Hello
  essentially of departure I don't understand how (for example) create and use the data based on the type of data varray type.
  
  Please notify.
  Thank you
  Andrew

  Hi André,.

  You can create new types of collection (varray/table) in two ways:
  (1) in the browser - find 'Types of data' > 'Types of Collection' node menu dropdown - there just 'create new collection type' it
  (2) in the types of data model diagram - you can create collection "some type structured" or collection of references to the it - use 'new Collection... '. "tool and click first on sight structured type and after the structured type that will contain the collection - new attribute is added to the latter and if there is none this type of collection already didn't set the new collection type are created and you can change it later.

  Philippe

• HP pav a 23 g while: how to find and use my webcam on my hp desk top 23g

  I can't find and or use my web cam can someone advise please how locacte or what softwear I need an i tried cyberlink and ucam on my system and can't seem to find the web cam option

  Thank you

  Hello

  Thank you for your response. Here is a troubleshooting document I've found with a few steps you can try, which could solve the problem.

  http://support.HP.com/us-en/product/HP-Pavilion-23-G300-all-in-one-desktop-PC-series/7477723/model/7729524/document/c01896811/

  Good luck!!

  To say thank you for the answer, click on the thumbs up icon below.
  If this solved your problem, please help others by choosing the solution provided.

• Edge 40-how set up and use the built-in Wecam? It is not listed in Device Manager.

  We just bought this new advantage 40 with the built-in webcam, but it does not appear in our Device Manager, or find how to use it or put up in assistance with this.

  How can we put in place and use it?

  Thank you

  Found the problem. The software has never been installed.

  I downloaded the software from yawcam and the camera has come magically to life.

• How to configure and use the local storage dirve and usb

  My company bought a server DMM cisco as well as 10 players of 4310 g dmp.  I tried to work on mine here to get it all working.  Let me expose what we would do first before to get into the details.

  The cental DMM will it play any content and be used to create and manage the content here at company wehre I am.  However my boss wants to send dmp individual players (4310 g) out to our factories across the country.  He wants me to be able to creat content or allow a person managing the exact address to edit the content and then push the content from the server DMM to corporate local DPM record either on local storage or attached thumb order.  I guess my questions on what are the following.

  (1) is it necessary to push the content locally for playback?  Willingness to play the content of our dmm on the wan to do lots of traffic?  Presentations could be as simple as a welcome page based presentation playing images video and flash.

  (2) based on local content would be a wise decision I'll have to see exactly how this is done poorly.  In the settings of the dmp, I see the setting of local storage and turned it on and set to read/write.  In regard to the command of thumb gose exactly how I implement that so that DPM can see?  I plug to the back of the drive, and it seems that it is active but the management console of the player I don't see anyway to actaully see if she knows the USB.

  (3) how will push the content for local storage and control of the DMM thumb?  It looks like I can send things to the storage internal if package transfer and or advanced/DPM deployment tasks or server file.  What exactly is the difference between these two?

  (4) Lastly how I actually play the local content of the dmp?  Can I set this up on a schedule of the dmm just like I would if he played the local dmm?

  I searched through the documentation, but I have not found any good docs who are clear to actually how to do these things.  So, any help would be appreciated.

  Thanks in advance.

  gec5741

  Hi Glen,

  Here are the answers to your questions

  1) is it nessesary to push the content locally for playback?  Will  playing content from our dmm over the wan be to much traffic?   Presentations could be as simple as a basic welcome page to a  presentation playing video and flash images.

  It is not required to push the content locally, you can also play the DMM directly. The main advantage of playing on the spot, is that you can transfer the videos several hours or days before the presentation begins to be played if you deploy content off hours and then, when he's ready to start playing the new presentation.

  If you play directly the content of the DMM, the content will be transferred at the time of the DMP starts playback. This may fail if the WAN link is saturated at that time here.

  2) If pushing the content local would be a wise decision I am having  difficulty seeing exactly how this is done.  In the dmp settings I see  the local storage setting and have it turned on and set to read/write.   As far as the thumb drive gose how exactly to I set that up so the dmp  can see it?  I plug it in the back of the player and it looks like it's  active but from the management console of the player I do not see any  way to actaully see if it knows about the usb thumb drive.

  You don't need to do anything to enable USB storage, simply plug it in. To confirm that the DMP is able to see it properly, the simplest way is to connect to the DPM via FTP and confirm that he has a «usb_2» directory This "usb_2" directory, where is the USB drive is mapped.

  3) how will I push the content to the local storage and the thumb drive  from the DMM?  It looks like I can send things to the internal storage  though the advanced tasks/deployment package and or file transfer to DMP  or server.  What exactly is the differnce between these two?

  The task of "File transfer" will just do this, transfer a file to the DMP. The deployment package is smarter and will transfer all the contents of a presentation and organize them in a structure that can be used to read the content locally. You should always use the deployment package.

  4) finally how will I actually play the content from the local dmp?  Can  I set this up on a schedual from the dmm just like I would if it was  playing from the local dmm?

  Yes, she may be scheduled as any other presentation.

  I suggest you have a look at the link below. He explains the steps required to configure the deployment package and read the content deployed with it.

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_2/DMM/user/guide/DMP/CDs.html#wp2188026

  I hope everything is clear now, but if you have any questions, let me know. I'll try to answer.

  Daniel

• How to deactivate and reactivate the video in Flash cc

  I have a video file in my flash page so I created my own custom, game put in pause and rewind.   I want to make an option to mute for people can transform the sound market.  I know that I can easily make final using the extract of "stop all sounds" but if I use the method how I may be able to make the sound can be turned back on without resetting the video itself?  Is this possible?

  When you play a sound you receive not given the sound channel it uses. Volume is a property of sound transformation. So to adjust the volume of a sound, follow these steps:

  var s:Sound = MySound() new sound;

  var sc:SoundChannel = s.play ();

  var st:SoundTransform = sc.soundTransform;

  You then to cut:

  St.volume = 0;

  sc.soundTransform = m;

  and reactivate would be:

  St.volume = 1;

  sc.soundTransform = m;

• How to launch and use the VMware tools

  After installing 2008r2 as a virtual machine and install VMware Tools, I am unable to open the tools and use them.  I did two days of searching, and I can't find an answer to my problem.    Downstairs is an action I took, but I would appreciate any help from the community.

  Purpose:

  Laboratory at home training and certification.

  Hardware environment: (based on "Chris Wahl" home Build Lab)

  SuperMicro Motherboard MBD-X10SLH-F-O

  Intel Xeon E3-1230 v3 3.30 GHz processor with 32 GB of ram

  Software environment:

  64-bit version of Windows 7 Professional, host operating system

  VMware Workstation 10 with all updates installed with administrator privileges

  VM #2: vSphere 5.1 install

  VM #1: The Windows 2008R2 VM I have a problem with VMware tools.

  I've deleted and rebuilt the two VM three times now, thinking it was my environment somehow.  ESXi 5.1 works although I have not built anything there yet.  I am able to access this part of the laboratory fine of vSphere Client.

  VMware Tools:

  Within the Services of VM 2008 I can see VMware Tools started service, the icon in the system tray notification area and see the files on the C: drive of the virtual computer, but there is no way to open it.

  I followed several links to create a virtual laboratory, but should not be this hard to run a program.  It's my first time that you try to use VMware tools, but I'm following the steps in the lab below install procedures.

  In the middle of the page of "Blog Editor" part 4 "build the ultimate vSphere Lab is where it installs the VMware tool and lowest after restarting Windows Update service I'm stuck to the next step."

  "Open VMware Tools, go to the Shrink ."  Click on the button of the prepare to shrink . »

  ?  How to "open the VMware Tools?

  Now on the path I have searched for and deleted and reinstalled the tools, but always without success.

  Here is a link where I found the following measures to be taken, but it doesn't work either.  The "NOTE" at the bottom, it's something I noticed and made sure was right when I installed the last time tools.

  I even found a link to where you can download the tools separately from the ISO files, and yet, it does not work.  A LITTLE HELP PLEASE!

  http://www.vdsyn.com/Windows-2008-R2-virtual-machine-VMware-tools-shows-not-running-current-after-vmotionsnapshot-operations-randomly/

  So next step that we did was
  1 uninstalled VMware Tools in the virtual machine
  2 restarted the VM
  3. manually deleted/renamed the C:\Program VMware Tools
  4. manually deleted/renamed C:\Programdata\VMware\VMware tools
  5 Rebooted
  6. install the VMware tools
  7 Rebooted

  The issue is not reproducible after the same

  
  NOTE: Make sure that the virtual computer CD player points to the correct image.  I found it always go back to the windows 7 iso image on my C: drive from physical machines to where the image 2008r2 was on drive E:

  No need to reinstall again. You're not missing something. VMware has changed the VMware Tools tray and removed options that were available in previous versions. Take a look at for example experience front of VMware: The VMware Tools GUI is gone - now what? with some information about this change and the replacement of the command line.

  André

• How to find and view the results in flash

  Hello friends,

  I work in Flash 8 and using AS 2.0 coding.

  I work with failover-page application. Here I have an option 'search '. I'll tell you the scenario.

  Here I am loading images/pages dynamically through xml. He loading and works as a page flipping. so far, it has been done. Now if you enter some text inside the search option and press, he must search all loaded images/pages and view pages resulted.

  How this feature is indeed. How to find the jpg with a given string?

  Your help will be really appreciated.

  Kind regards

  Rajesh

  You must have a database of information related to the pages.  If the pages are only jpeg images, then they will not be able to provide you with anything in the way of useful data searchable beyond possibly titles image.  So, you will need to create a database that contains all of the information in these pages that you can have your (matching chain) diagram of function search works with to find matching information.

• How to find hidden using the Finder folders

  Really frustrating!  I want Finder to display the hidden files and folders.  I tried everything I could find in this forum and others to do so.  That's what I tried (many times):

  Tip #1:

  Finder > go hold the option key

  If you need to continuously show

  Open your Finder > go > home folder and then order J to see the display options

  

  Then, restart Finder

  Suggestion #2:

  Show hidden files Mac OS X El Capitan:

  1. Click the "Finder" icon in the dock of your Mac.
  2. Open a Terminal. Terminal is a utility that allows access to the operating system OS X El Capitan. It can be opened in one of two ways:
  3. Select 'Applications' on the left side, click "Utilities" and then double-click "Terminal."
  4. Open the launch of OS X El Capitan area. Click on the "Utilities" folder Then, double-click "Terminal."
  5. Enter the following in the Terminal window, and then press "Enter": "defaults write QLEnableXRayFolders AppleShowAllFiles YES."
  6. Exit the Terminal program. This can be done by selecting "Quit Terminal" in the Terminal.
  7. Restart the Finder. Your new setting will take effect after you restart the finder. To do this, hold down the 'Alt' key and click or with two fingers on the Finder icon. Select "raise".

  None of them work for me.  :-(  I use Macbook Air and El Capitan Version 10.11.4

  Do not include the quotes.

  write QLEnableXRayFolders AppleShowAllFiles YES