Display the member name and the alias in Smart view

Similar Questions

• How to display the member name and/or Alias according to generation in Studio EN?

  I have a report that contains relatives in lines that are set to stretch and show Member aliases. During the expansion under the parent I would like to display the member name and Member Alias. I tried conditional formatting to replace the Alias members using a text function, but replace only accepts text, not functions. Does anyone know how to do this?

  I use 11.1.2.3

  Do you need to in the same column? If this isn't the case, you could pull in another column of the alias and use conditional formatting to hide either or depending on the generation.

• SmartView-setting 'Member Name and Description' with HFM

  Hi all

  We have EMP 11.1.2.3.500 environment with planning, Essbase, HFM installed products. We use the latest Smart View version 11.1.2.5.215/216.

  When you try to retrieve data for HFM using this version of SmartView I don't get member name and aliases in the report even if I check the option name of Member and Description in settings Smart View Member, we were using an older version of SmartView 11.1.1.3 that could retrieve the names of the members with HFM 11.1.1.3 description inside.

  When I try the same thing for Essbase and planning 11.1.2.3 I get the alias in another column (which is not similar to v11.1.1.3) so it's working for Essbase and planning.

  HFM does support the SmartView parameter Member Name and Description /Description?

  
  

  Is there no workaround solution to achieve this because we have more than a hundred of the SmartView already integrated in the previous version and it won't work for us to only have member names in the reports.

  
  

  Thank you

  Rachid
  

  The problem is solved by setting the preferred language in the workspace for the consolidation...

• BlackBerry Smartphones for incoming calls caller ID displaying DO NOT name of contacts (phone number only views)

  Whenever I receive an incoming call, the caller ID shows that the phone #, even when I have that number corresponded to a contact.  Since I have not much phone # stored s, I have no idea it's someone I know.  However, the contact name appears in the diary of appeal, but not on the initial display of incoming call.  How can I get caller ID to recognize and display the name of the contact with the phone #? Any help would be greatly appreciated!  (I have the blackberry 8520)

  Thanks, Lauren

  Hello and welcome to the Forums of Support BlackBerry.com.

  It could be one of the three solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
  * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
  * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.
  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

• Unable to get the list of Essbase servers in the office with Smart View 11.1.2.1

  Anyone tried connection shared in Smart View 11.1.2.1? I am able to connect to, but it doesn't show all the servers in the non editable drop-down list. I tried with Office 2003 sp3, Office 2007 and office 2010, but none of them works. Also, I tried to find the datasourse.xml file in LWS - aps in the console of shared services, but is not there. I tried the solution given on that link also, but the datasourse.xml file is not in place.
  http://timtows-Hyperion-blog.blogspot.com/2011/04/smart-view-private-connection-issue.html
  
  my environment.
  Win 2003 SP2 32-bit
  SQL 2005 on separate windows box
  E.M.P. 11.1.2.1
  Shared services
  Essbase Server
  Essbse Client
  Essbase Integration
  The provider services
  Essbase Studio
  
  All components above configured successfully.
  
  I connect to Essbase through the URL http:// < server >: 19000/workspace/SmartViewProviders. It shows the login window and allow me to get gold, but the drop-down list is empty. No server listed.
  Let me know what I'm missing.

  I found the problem and solved it...

  Cause:
  SmartView is unable to save properly with all other components.

  Solution:
  After the installation of a SmartView, run the Configuration utility and select Foundation-> Web Configuration record properly with all other components.

• Unable to connect to the server with Smart View essbase

  Hello
  
  I'm having trobules connection Smart View to make ad hoc analyses, but perfectly I could establish a connection with planning and navigate web forms in Excel.
  
  The address that I use to connect to Essbase is: http:// < server >: 19000/aps/SmartView and planning url is http:// < server >: 19000/HyperionPlanning/SmartView
  
  I have already used these URLS in another server with the version 11.1.2 but now that I'm trying to connect to a server with v11.1.1.3 I can't. Whenever I connect to planning to see forms a prompt appears with the message saying that "I connect to a server with an earlier version" but I could work perfectly with the forms. When I connect to essbase, I can see the apps but I can't just do any analysis adhoc.
  
  Could someone has an idea of what could happen?
  
  Thanks in advance
  
  Published by: user9143843 on January 13, 2011 04:58

  SmartView 11.1.2 is not compatible with Essbase 11.1.1.3.

  Reference - http://www.oracle.com/technology/software/products/ias/files/fusion_certification.html

  HTH-
  Jasmine.

• How to check the version of Smart View

  Hello
  
  I need to check the version of SmartView.
  
  Open Excel > SmartView > help > topic
  
  Is this correct?
  
  
  Concerning
  Kumar

  Yes, that should tell you the version of the Smart view that you use.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to display the ddl for a view

  In oracle 11g how can I write a query which will display a view initial create MATERIALIZED view?

  I know that you can click on the SQL tab in sql developer, but how can I do the same thing with a query?

  Hello

  996454 wrote:

  In oracle 11g how can I write a query which will display a view initial create MATERIALIZED view?

  I know that you can click on the SQL tab in sql developer, but how can I do the same thing with a query?

  Yes, the code is in the data dictionary:

  -In SQL * Plus, do this first:

  VALUE LONG 8000

  SELECT text

  From user_views

  WHERE view_name = 'MY_VIEW '.

  ;

  You can also use dbms_metadata for getting this.

  What do you mean by "seen statemnt to create initial display ?  If you create a view and then do a CREATE or REPLACE VIEW statement, then the initial definition is lost. only the most recent is kept in user_views.

• display the hierarchical member alias names

  How to display the alias names of the hierarchical member instead of the names of members of contour in shapes of lines and columns?
  Thanks in advance.

  Hello

  Click the dimension properties icon right next to the drop-down list of dimension (to the left of the input box where you put the name of the Member in) in the form of row/column design.
  It will have a property for "alias member.

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Once the Interactive connection: not display last user name has been applied is it possible to reverse the trend. I want a few users to see their user names.

  Once the Interactive connection: not display last user name has been applied is it possible to reverse the trend. I want a few users to see their user names.

  Initially, it was setup for the security but now a few users need to see who's online before.

  Help, please

  Hello

  Thank you for contacting Microsoft Answers.

  You do the following:

  1. click on start.
  2. type: secpol.msc and press ENTER.
  3. go to local security policies / adjustment / security options.
  4. on the right side to find Interactive logon: do not display last user name and change to turn it OFF.

  If the issue is not resolved, answer here.

• When you perform queries Smart View Ad hoc, changing the selection of the Alias in the Essbase himself Ribbon

  Hyperion Planning

  GPE, Fusion edition, 11.1.2.2

  Smart View 11.1.2.2

  When running Smart View Ad-hoc queries, selection of the Alias in the Essbase Ribbon does not.

  When I start a new query, the Alias in the Ribbon of Smart View is always set to None; but often, not always, the selection will change itself no default - usually after I refreshred/zoom a few times.  He starts a time past, I change the selection of the Alias in the Ribbon in none, but it changes just itself by default again.

  The option to display the name of the Member is defined on behalf of members only.  (This is the default setting for this option and I usually begin with all the options, by default).

  This problem started after that we went to 11.1.2.2.

  If neither know why the Alias / None change automatically in the Essbase Ribbon?

  Thank you

  Veronica

  There is a way that you can set for your connection

  When you use shared connections to connect to your application, you do a right click and say "Add to private connections". Once you have added to your private connection, right click and click 'Set Alias Table'. You can do this on a connection that you have added to private connections

  Concerning

  Amarnath

• The Windows 7 Explorer displays the file as empty but empty folder properties is not

  Hello, I'm trying to delete empty folders from my computer. I am running Windows 7 Professional, and my user account is an administrator and the user account only on the computer.

  When I use Windows Exlporer to navigate to the folder, it seems empty: "this folder is empty". But if I navigate back to the parent and then right-click on the folder and select properties it shows: "contains: 1 file, 0 folders" or for some records: "Contains: 2 files, 0 folders. Even when I run on the DIR of CMD file.

  I have hidden files and folders checked to display and I have checked that I am the owner of the folder.

  Any ideas?

  Neil Benson, CRM Addict at Customery Ltd. You can join me onLinkedIn orTwitter, and we invite you to joinCustomery, an online community for people based in the United Kingdom Dynamics CRM.

  One more step. I found another option in Windows Explorer: "Hide protected files of the operating system (recommended)". Just in case where you need help to find this option:

  1. Open Windows Explorer
  2. If not display the menu (file, edition, view, tools, help) options, click ALT
  3. Click on tools
  4. Select folder options...
  5. Click the view tab
  6. Untick: Hide the protected files (recommended) operating system

  You can now see and search for files hidden, protected from the operating systems such as Thumbs.db.

  I use fast empty folder of http://listeningpc.com Finder to find and remove empty folders.

  Hope this helps someone else.

  Neil Benson, CRM Addict at Customery Ltd. You can join me onLinkedIn orTwitter, and we invite you to joinCustomery, an online community for people based in the United Kingdom Dynamics CRM.

• List of all VM network name and IP address

  I am trying to get my head around powerCLI.

  I want to create a script that will the virtual machines on a cluster of output and display their network name and IP address.

  I have this so far.

  (get - vm). %{
  $vm = $_
  echo $vm.name.
  $vm. Guest.Nics | %{
  $vminfo = $_
  echo $vminfo.NetworkName $vminfo. IP $vminfo. MacAddress
  echo '; ' n ';
  }
  } | Export-Csv C:\vm_nic_report.csv

  I'd love to be able to limit the output on the cluster baised, but I can't understand this.

  If I run it without the Export-CSV, I see the info that I need on the screen, but if I add the Export.csv, my CSV is a colum with a bunch of numbers and no real value.

  Hello, TdisalvoOrinoco-

  If you want to limit the output to virtual machines that reside in a specific cluster, you can just start the whole expression with a Get-Cluster and then direct to the Get - VM with which you start currently (or use the - rental on Get - VM parameter).  Thus, the first line would be one of:

  &{Get-VM -Location (Get-Cluster myCluster0) | %{    $thisVm = $_    ## a hashtable for holding properties to be returned    $hshNicInfo = @{}; $hshNicInfo["VMName"] = $thisVm.Name    ## for each NIC, build some info with MACAddr, IPInfo, and Network Name    $thisVm.Guest.Nics | % -Begin {$i = 0} -Process {        $oThisNicInfo = $_    ## the current NicInfo item        ## get the IP info (IPv4 and IPv6 if there, which should be available if VMware Tools are running)        $strIPInfo = ($oThisNicInfo.IpAddress | sort) -join "/"        ## add the NicInfo items to the hashtable for later use with New-Object        $hshNicInfo["Nic${i}MACAddr"] = $oThisNicInfo.MacAddress        $hshNicInfo["Nic${i}IPInfo"] = $strIPInfo        ## this does not seem to have the network name if the portgroup is on a distributed vSwitch, so changed to the line after it        #$hshNicInfo["Nic${i}NetName"] = $oThisNicInfo.NetworkName        $hshNicInfo["Nic${i}NetName"] = ($thisVm.NetworkAdapters | ?{$_.MacAddress -eq $oThisNicInfo.MacAddress}).NetworkName        $i++    } ## end foreach-object
  
      ## once the hashtable is populated for all NICs, create a new object with the info    New-Object -TypeName PSObject -Property $hshNicInfo} ## end foreach-object## sorting goodness from LucD (of course) at http://communities.vmware.com/message/1769991#1769991} | sort -Property {(Get-Member -InputObject $_ -Name "Nic*").Count} -Descending | Select VMName,Nic* | `    Export-Csv -NoTypeInformation -UseCulture C:\temp\vm_nic_report.csv
  

  This is similar to the script posted in the thread http://communities.vmware.com/message/1848022#1848022 (which post has a bit more info on the necessary sorting for good performance, but also another way to recover data, using Get - views).

  In any case, it is a little more that you might write to debut with PowerCLI, but that he gets the output you're looking?

  Message edited by mattboren on February 15, 2013: change the part that gets the name of the network, such as TdisalvoOrinoco noted that VMs on vSwitches distributed has not been populated NetworkName

• How we can display only Member description forms?

  I don't want to view member name or an alias.
  Description dimension must be visible.
  
  Thank you
  Chrystelle

  Currently, you can not. Name of the alias or one Member or both.

• Unable to access the Smart View 11.1.2.5.216 in Outlook 2007

  All,

  I uninstalled Smart View 11.1.1.3.x of my MS Windows 7 (x 32) Professional SP1 machine and installed Smart View 11.1.2.5.216 during the same session (that is to say, without having to reboot).

  While SmartView arrives perfectly fine when I access Excel, Word and PowerPoint and I can connect to the 11.1.2.3.00 EMP data sources, I don't see the Ribbon of Smart View under MS Outlook. This is in spite of:

  -After changing my MS Office 2007 installation to run Visual Basic Scripting Support on my PC for MS Outlook 2007 only (i.e., via Control Panel > programs and features > MS Office Standard 2007 > change > add or remove components);

  -remove the key HKEY_CURRENT_USER\Software\Hyperion Solutions and that underlie the subkeys, after uninstalling 11.1.1.3 and before installing 11.1.2.5.216

  There is no disabled COM add-ins displayed in MS Outlook 2007 and there is no other entries related to Hyperion (IE, HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\Addins\Hyperion.CommonAddin) to amend\delete under HKEY_CURRENT_USER\Software\Microsoft\Office\Outlook\AddIns. Also, I searched but could not find the Smart View PST file on my machine.

  Has anyone any suggestions as to where else I could be looking or what else I could do to activate the smart display in MS Outlook 2007?

  Thanks in advance.

  JBM

  Have you tried under option

  

  HTH

  Amarnath

  ORACLE | Essbase