Display the PIX ver 6.3 (4) config

Similar Questions

• I did the screen too small (using about: config) and lost the address bar and all the menus. How to restore the display on a screen size can be used?

  I changed the size of display screen using about: config, as stated in the other answers help. After you use a value of 1.0, such as recommended, I've experimented with other sizes, because it seems small. I have entered a large number by chance (a typing error) and made the display so small that only a bug could read. And I lost all the features: bar address, menus, home, Favorites, settings icons.

  I uninstalled and reinstalled Firefox, thinking that this would fix it. But the new facility displays the same way: unreadable and no functionality.

  I found instructions on resetting to the factory settings, but cannot perform this task because I have to be able to access the menus to do so.

  Hello PaulaBob, have you changed the value of layout.css.devPixelsPerPx? -You can perform the following steps to change the still 'blind ': value

  1. Open firefox, and then press ctrl + L (this will focus in the address bar)
  2. type of topic: config
  3. Press ENTER twice
  4. type devpix
  5. Press the tab key
  6. Press enter
  7. type 1.0
  8. Press ENTER again and I hope you should be normal visibility now

• Comment by instructions in the PIX config file?

  Hello

  Is there a way of declarations of entry comment in a PIX config file? If so, how?

  TIA

  Prefix the line with a: (colon).

  for example. The first line of the following is a comment and is ignored

  : Allow access to the Web server

  acl_outside list access permit tcp any host 1.1.1.1 eq www

  Note: Comment lines are deleted when the configuration file is entered in the PIX.

• Copy the Pix on TFTP config

  Hello

  What is commands or a PDF that explains how to copy your PIX config on tftp and then again the pix of replacement.

  Thanxs

  Cisco PIX Firewall Version 6.3 (1)

  Hi Yokby,

  Welcome to netpro.

  You can connect to the PIX CLI and use the following command:

  write the net

  Give the IP address of the TFTP server when you are prompted.

  You can use the following command to copy from the tftp server to the PIX:

  Configure the net

  give the location and the file name when you are prompted.

  All the best... the rate of responses if deemed useful...

• PIX command to display the State of tunnel upwards or downwards

  I would like to ask if there is a specific order in the PIX OS, that will allow me to show if the tunnels I implemented for VPN from a distance PIX to local are active...

  I looked through the show? on the Pix but cannot determine...

  You would think that there is a command 'see the tunnel... "

  Hello

  You can use:

  "Show isakmp crypto her" to see whether or not your tunnel is mounted and,.

  "A show crypto ipsec her" to see if the packets are encrypted/decrypted or not.

  Kind regards

  Arul

• Firefox for Android only displays the desktop version of gmail rather than mobile.

  Android only question.

  I prefer to access gmail via a browser rather than the gmail app. Tests of other browsers on Android (Chrome and Dolphin) I see that they display a mobile-specific version of the gmail Web site.

  Firefox for Android only displays the version of office on my Nexus 7 (5.1 runs Android 2012) - and therefore more difficult to read and use. Any help or ideas would be greatly appreciated.

  Thank you

  Pinellas Chuck

  Well, Yes, it's that Word annoying Tablet.

  What I'm going to describe is difficult to type, so I hope that you can open this page on your tablet.

  Select (0) and copy the following text on your Tablet if possible to avoid the excesses of type:

  general.useragent.override.mail.google.com Android; Tablet;#Android; Mobile;
  

  The forum linkifies this first part, but it is not supposed to be a link.

  (1) open a new tab to Subject: config (type about: config the Awesomebar and hit the arrow go or tap Enter).

  You can bookmark it for easy future access.

  (2) in the search box, type agen and make a pause while Firefox filter list

  (3) scroll down to the bottom and look for a preference named general.useragent.site_specific_overrides and confirm that it has its default value true. If it is set to false, press the reset button for it back to true.

  (4) scroll back up and press the big button "+" to the left of the search box to add a new parameter

  (A) the name of the preference must be general.useragent.override.google. com (for all Google sites) general.useragent.override.mail.google. com (for Gmail only)

  If you type this, beware of the correction automatic insertion of spaces and be sure to remove those.

  If paste, remove the part after that.

  (B) on the right side, type Boolean and in the popup, change it to a String

  (C) the value of the preference should be Android; Tablet; #Android; Mobile; -in other words, substituting Mobile for Tablet.

  If you type, pay attention to the excess spaces.

  If gluing, remove the preference name and extra space before this part.

  (D) then click on create

  If you open https://mail.google.com/ must now use the mobile layout.

  Success?

  Edit: To clarify the name of preference options.

• Firefox not rendering or display the graphics properly, tried everything?

  Firefox not rendering or display the graphics properly.
  When a page loads first, fine, but if you click on a few buttons, then the back button to return to the page of the image is cut in half, or lack of parts of it, on the page what happens, if I delete the page history and refresh, all goes well, once again, I also worked on a web page that does the same thing on the server or locally, I haven't tried any cache, refresh on the page load, ran Firefox in safe mode, my friend has Firefox also and he got the same results, Internet explore, no problem, no problem of Chrome, I need to solve this problem with Web page, I'm working on the side of the code so that everyone doesn't have this problem.

  Try disabling OMTC and leave hardware acceleration in active Firefox.

  • topic: config page: layers.offmainthreadcomposition.enabled = false
  • http://KB.mozillazine.org/about:config

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • https://support.Mozilla.org/KB/how-do-i-upgrade-my-graphics-drivers

• Typing a wrong URL in the URL from Firefox 31.0 bar redirects me to us.yhs4 yahoo com search that displays the LAVASOFT logo. It is not the case with any of my

  Typing a wrong URL in the URL from Firefox 31.0 bar redirects me to us.yhs4 yahoo com search that displays the LAVASOFT logo. It is not the case with any of my other browsers (IE, Chrome, Opera, Safari). So this cannot be a problem ISP as shown in all current references to Firefox.
  This problem started after I uninstalled adaware from LAVASOFT. It itself instead of uninstall. Thus, it is malware behavior while LAVASOFT is pretending to protect against malware.
  Nevertheless, I would like to know how to get rid of this annoying 404 redirect hijack. My home page is about to startpage com, my default search engine is startpage com, all references to Lavasoft and adaware have been removed by subject: config and Windows registry...
  How to get rid of this spam redirect, please?

  Click Tools > Options, then general tab

  In the home page box, type the url you want to fire fox opens by default when you start the browser.

  KhalidXpert

• Firefox 5 displays the right fonts only in Mode safe!

  After upgrading to Firefox 5, I noticed it displays the wrong fonts (larger than they should - they look ok in Firefox 4.x, Chrome, Opera).

  The strange thing is that if I run Firefox 5 Mode without failure, it displays it correctly. I have disabled all addons, I cleaned all Cache, configuration of the size of minimum font... even reinstalled. It is allowed only in Mode safe looking.

  What else to do?

  Safe mode disables extensions in Firefox 4, and disables hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  Try to turn some of the prefs Boolean gfx.font_rendering on the topic: configuration page to disable some features.
  
  Filter: gfx

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.
  
  You can use the filter at the top bar of the on: page config to more easily spot a pref.

• How do you get MY photos to display the photos instead of written discription

  Hello. I'm in MY pictures and I would program photo poster not written description of the pix for example. jpg, date, etc. How to move this back to this form of display? thanx, Deb

  Hello. I'm in MY pictures and I would program photo poster not written description of the pix for example. jpg, date, etc. How to move this back to this form of display? thanx, Deb

  Hello

  Open Windows Explorer.

  Open the pictures folder.

  Right click on this file and select view. Click on one of the icon views (Small, Medium, Large, Extra large).

  This should show the thumbnails of photo files.

  Let us know if it works for you.

  Concerning

• W2000 PPTP in the path through the PIX PIX

  Inside of a configured simple PIX I have a w2000 customer VPN with PPTP. The client cannot talk to one another otside PIX configured with VPDN.

  Everything works as expected if I put in a nat-Firewall NETGEAR801 instead of PIX siple.

  See PIX config and syslog. Waths evil?

  6.2 (2) version PIX

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate 2KFQnbNIdI.2KYOU encrypted password

  FAXRuw8pF2Tl7oBe encrypted passwd

  HMS host name

  fixup protocol ftp 21

  fixup protocol http 80

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol they 389

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol sip 5060

  fixup protocol 2000 skinny

  names of

  access-list acl_outside allow icmp a whole

  access-list acl_outside allow accord a

  Allow Access-list acl_outside esp a whole

  pager lines 24

  opening of session

  recording of debug console

  recording of debug trap

  host of logging inside the 194.132.183.10

  interface ethernet0 10baset

  interface ethernet1 10baset

  Outside 1500 MTU

  Within 1500 MTU

  external IP 217.215.220.221 255.255.255.0

  IP address inside 194.132.183.2 255.255.255.192

  alarm action IP verification of information

  alarm action attack IP audit

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Access-group acl_outside in interface outside

  Route outside 0.0.0.0 0.0.0.0 217.215.220.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  No sysopt route dnat

  NSM #.

  Syslog sed:

  % 305011-6-PIX: built a dynamic TCP conversion of ide:194.132.183.10/1366 to outside:217.215.220.221/1124

  % 302013-6-PIX: built 212 for outbound TCP connection: 194.71.189.109/1723 (194.71.189.109/1723) to inside:194.132.183.10/1366 217.215.220.221/1124)

  % 3 PIX-305006: failure of the regular creation of translation for the internal protocol 47 src: 194.132.183.10 outside dst: 194.71.189.109

  % 3 PIX-305006: failure of the regular creation of translation for the internal protocol 47 src: 194.132.183.10 outside dst: 194.71.189.109

  % 3 PIX-305006: failure of the regular creation of translation for the internal protocol 47 src: 194.132.183.10 outside dst: 194.71.189.109

  % 3 PIX-305006: failure of the regular creation of translation for the internal protocol 47 src: 194.132.183.10 outside dst: 194.71.189.109

  % 302014-6-PIX: disassembly of the TCP connection 212 for side:194.71.189.109/1723 to inside:194.132.183.10/1366 duration 0:00:10 TCP fins 788 bytes

  First off I would say don't not cut and paste your config PIX here, or at the x.x.x.x at least on your external IP address.

  The PIX does not support PPTP thru PAT (nat/global). PPTP uses the Protocol IP 47 (GRE), and the PIX cannot PAT these cause there is no TCP/UDP port number to use.

  PIX 6.3 code it will however support, but it won't be available until the beginning of next year. At the moment the only way to circumvent your situation is to define a one-to-one NAT translation for this internal host. Something like:

  > static (inside, outside) 217.215.220.222 194.132.183.10 netmask 255.255.255.255 0 0

  will do for you, providing you 217.215.220.222 routed and available. I would also change

  > acl_outside of access list allow accord a

  TO

  > acl_outside gre 194.71.189.109 allowed access list host 217.215.220.222

  It's a little safer.

• Ping on the PIX firewall

  Is it possible to ping directly from low security high security without translations on a PIX?

  For example, 192.168.2.90 is currently natted to 10.0.0.4 by the pix. I want to ping directly from 192.168.2.4 to 10.0.0.4.

  I can certainly ping directly from 10.0.0.4 to 192.168.2.4.

  Please let me know if you would like to see the complete config.

  I hope I understand your question completely. You try to ping from one interface to another on your PIX. This URL explains how this can be done.

  http://www.Cisco.com/warp/public/110/31.html

• Enable syslog server behind the PIX

  Could someone tell me a config that allows a server syslog (Kiwi syslog) to get behind the PIX syslogs. I have a 2K with the KIWI syslog server behind a PIX 501.

  I have the static command, the access group and the access-list:

  public static 192.104.109.92 (Interior, exterior) 192.168.15.200 netmask 255.255.255.255 0 0

  Access-group local_server in external interface

  local_server list access permit udp any host 192.104.109.92 eq syslog

  Man, I can't understand it.

  Thanks for any help

  You could:

  1. make a capture of port syslog traffic directed to the syslog server.

  2 Terminal monitor - deny traffic showed clearly when I had not set up the firewall to forward the traffic. (Note: attention on busy firewall)

  3 netstat - a on the syslog server

  4. If you allow, you should be able to portscan the server on port of syslog by your firewall.

  5. is your syslog capture created file? It is not created if the service never started.

  6 - is the service running in the system context or perhaps another account that doesn't have the correct rights?

  The answers seem to indicate a service not started that seemed likely. What you describe happened to me when I had the demon also version; I went to service version and the problem has been resolved (once I opened the port.)

  I love the kiwi syslog. I use with Snare and BacklogIIS and receive alerts within 60 seconds to my mailbox when something bad happens. It always fools of my end users out when I call them with the problem solved when they seek always my number report the problem.

• Incoming direction on the Pix interfaces

  Access-group of statements always apply an ACL to an interface with the command "in the interface. The Pix docs say "this filter incoming packets to the given interface. I would like a clear definition of what's arrival. My understanding, according to the logic of the access lists that I have made a request, this incoming is-bound traffic in the interface of the Pix of the connected subnet. So for the following interfaces, traffic entering the following subnet provenance

  outdoor - traffic from the Internet

  inside - traffic from inside Lan

  DMZ - traffic coming from the DMZ

  I just wanted to check that, because it's contrasted with IOS router configs. My understanding is the following:

  Outside the s0 interface - incoming list applies to incoming traffic from the Internet

  Inside interface e0/0 - incoming list applies to incoming traffic traffic vs subnet towards inteface as in my example of Pix inside.

  If someone could verify this, point me to a link or correct my examples?

  Thank you

  RJ

  1. Yes, to filter incoming traffic in the interface

  2 traffic can originate from anywhere, that is to say of many jumps/subnets away or directly connected before it hits the interface, but it moves to the interface. Same logic on pix and router.

  3. Yes, to filter traffic leaving the interface

  4 Yes, traffic position away from the router to the connected subnet or a destination of many jumps far (PIX has no more outgoing ACL)

  Steve

• The upgrade of the PIX firewall

  I currently have two firewalls Pix 515 (v4.4 and v6.2). I want to update the v4.4, but am unable to download the software from Cisco. Whenever I try to download using the link 'download pix software', it times out.

  I have already set up a tftp server and plan on the use of monitor mode to perform the upgrade. I already did a "write net:" to save the current configuration. " In addition, the original configuration remains intact, or they will be lost after the upgrade.

  Thanks in advance.

  Looks like you may have a problem with the download or the browser proxy. Try another host and/or browser and see if it works better.

  Since the PIX 4.4 software and versions later, you can go directly to any newer version of the software. To preserve your config, but it's always a good idea to back it up before an upgrade as you did. The config in the PIX is actually not get converted when PIX is restarted with the new software - what happens the first time you do a "write mem" under the new software, it is so important to remember to do as part of the upgrade process. You can then check the config freshly recorded against your configuration of backup for all differences. In addition, it is important to check the Release Notes before upgrading, but if you have a config PIX relatively simple it will probably be fine. One thing you want to do is migrate away from lines on access lists. Cisco is a utility that allows to convert them for you, and it does a very good job as long as your config is not too complex, so I might suggest to give it a try and see how it works for you. The downloadable version of this utility must be on the same page as other PIX software download, and there are versions for Windows and Sun Solaris.

  Good luck!