display user messages

Similar Questions

• How to: display a message while for loops, with no required user input

  Hi everyone, I'm relatively new to LabView, using 8.5.

  I want to display a message all in one for the loop runs, requiring no user input to delete the dialog box (that is to say, the box disappears after the end of the loop For).

  Any ideas?

  Thank you

  Darren

  
  

• Display a message to a user in a while loop

  Hello.  I've been using Labview for about 4 days and I have this preface saying that it is a homework problem, I'm not looking for an exact solution just someone to point me in the right direction.  I need to display a message to a user.  The problem is that, since it is within a while loop, when the condition is met for the notification to display, it just returns to the top and never let the user change the values to correct the problem.  It should be pretty obvious that the vi is supposed to do by looking at, and everything else works fine, until I put the message in it.  As an aside, I know that there are probably much better ways to accomplish the tasks that I decided to do about it, but as I said, I am completely new to LabView, so I apologize for the most elegant programmers out there for my brute force programming!  I searched the forums and found a few things about statements of case and registers at offset, but I have no idea how to use.  I have on this part of the problem, worked for hours now and make me nowhere, so any help will be really appreciated.

  Welcome to the Forums!

  First of all, thanks for pointing out that this is a homework problem. We mind helping people learn LabVIEW but oppose when someone is trying to put his homework for him.

  Statements of case and shift registers are probably what you need to learn next. Specifically, a state machine is probably well suited for this type of program. I think that your LV version came with a template or design for a state machine model. Look under the menu file > New... (No new VI) and see if you can find a state machine model.

  Other comments:

  -If you don't use a structure of the event, and then put a (ms) waiting inside the loop so it doesn't turn thousands of times per second that does exactly the same thing each time until the user changes a control.

  -In line and force? will make the comparison and select lower left and upper right part of your VI.

  -Force the amount entered for the multiple of 5 cents is OK, but can be confusing to the user trying to get 3 cents. A note on the Panel or a bunch of advanced control may be useful.

  Lynn

• Display a message to the main user of sub vi VI

  Hello

  I have a question which I'm sure he has met before, but I couldn't find it via the function or search with Google.

  On my main vi, I have a link to a sub vi, this subroutine vi check something and then displays a message to the user. The next step in the sub VI depends on what users on the input message is. But when I run my main vi, that the display (of course) is not, because I do not have a link between the two.

  Is it possible to send the message to the main vi and return the action the slot vi?

  Thank you

  Given that everything that happens in the sub vi, why would you go back to the main vi?

  Do you use the express vi "Prompt the user for entry" to get an input from the user?

  Can you post your code or make some dummy vi to visualize your problem?

• Display a message to the user w / result of data

  Howdy,

  First off it is a mission of the College work and it's especially complete; seeking advice and the experience here.  The mission is to create a calculator with many functions for each method of arithmetic.  It was easy enough, but the next step is to display a message to the user after each calculation.  For example, if the problem was 4 + 2, the message must be "the result of the addition is: 6. the creation of the part of the message by using the Msg to display the user-defined function is simple, but it is not exactly struck home.  I want to create a message that contains the result of the problem (for example 6).  As it is now I can't do that with the function of Msg, or if it is possible I can not quite understand.  I want to have a separate message for each function, but I don't know if I can incorporate the response into the message.  It's the underlying objective; How to integrate the response in a message dialog box to the user? If it is possible what should I watch?

  The VI himself is quite simple; case of structure for each arithmetic function and a certain time for execution loop.  X and there are entries and a drop-down list to select a structure if necessary. I've attached a screen below.

  Thank you

  

  THA

  You can use the Message to display to the user to view any string to the user. If the key is to use the palette of the chain to manipulate strings to get the error message.

  A subpalette of the palette of the chain is the range of number/String Conversion. This can help you get your (6) value into a string format and then you can concatenate that string however wished with the message.

  With the pop-up windows, you must make sure that you're not trigger this popup with every single loop, so make sure you put a case around the pop-up structure and place the logic in there to make it work only the case of popup when the value changes.

• How to display a message when users open the form

  Hello

  l want to display a message when a user opens a form.

  The message will explain the shape and if the clik user NOT close the form

  Thank you

  Stone

  You can use this script in the docReady event.

  if (xfa.host.messageBox("A message goes here to explain the form","Title for the Message Box", 1, 2) != 4) event.target.closeDoc();
  

  Just be careful, that I was unable to "test" it in LC, I had to save the file and open it in the drive to verify that it worked.

• To display user-defined message when connect you to oracle

  Dear all,
  
  I display a message when the connection or connect to oracle Sql more why I created following pl/sql block.
  
  declare
  ls_global_name varchar2 (4000);
  ls_user varchar2 (30);
  Start
  Select global_name
  in ls_global_name
  from global_name;
  
  Select user
  in ls_user
  Double;
  
  ls_global_name: = ls_user | '@' || ls_global_name;
  dbms_output.put_line (ls_global_name);
  end;
  
  Above block display username@database name: SCOTT@TEST_DB:
  
  This messaes I want to display during each new session connection.
  
  Could you please suggest me for what I do.
  
  
  Waiting for your valuable comments.
  
  Thanks in advance:
  
  Vinod Gupta

  Hello

  If sqlplus starts, it searches files glogin.sql and login.sql. Glogin.SQL must be in $ORACLE_HOME/sqlplus/admin then begins as the connection is established. After that, there is the call to login.sql. This file must be output in the current working directory or in the path given by the variable SQLPATH.

  If both can be used.

  a flie content can be

  / * Start script * /.
  Set serveroutput on

  declare
  ls_global_name varchar2 (4000);
  ls_user varchar2 (30);
  Start
  Select global_name
  in ls_global_name
  from global_name;

  Select user
  in ls_user
  Double;

  ls_global_name: = ls_user | '@' || ls_global_name;
  dbms_output.put_line (ls_global_name);
  end;
  /

  / * End script * /.

  Maybe instead of through dbms_output display, you can set the sqlplus prompt using "set sqlprompt ls_global_name.

  Take a look at the users guide SQLPLUS documentation: http://download.oracle.com/docs/cd/B19306_01/server.102/b14357/ch3.htm#sthref775

  Herald tiomela
  superconsult.nl

• Symantec Antivirus Corporate Edition "scan stopped by user" message after you have installed the latest update of Microsoft Security

  I run Symantec AntiVirus Corporate edition 2002 (build version 8.00.9374). The following problem, I discovered yesterday (May 13) when my analysis system and antivirus weekly update is scheduled: from an analysis of the system, the scan box opens and immediately stops, displays the message "scan stopped by user", followed the date & time and all control buttons are grayed out (not functional) with the exception of the close button.

  The only change that took place in my PC has been the download and installation of the most recent update Security for Windows XP (KB978542) which is described as: "critical Microsoft Security Bulletin MS10-030 - vulnerability in Outlook Express and Windows Mail could allow Code execution (978542) remotely.
  (url: http://www.microsoft.com/technet/security/bulletin/MS10-030.mspx)

  I tried to uninstall the security update; uninstall - reboot - reinstall - Live Update of the antivirus application. do a system restore point to return to the previous week - to no. AVAIL.

  I later identified this same, exact problem on 3 other computers running XP with sp 3 which just installed the latest update from security Microsoft.  I would be grateful to any suggestions on how to remedy this situation.  As a newbie to this forum, I would appreciate if others copy this assignment to other sections of the Symantec and Microsoft sites that could give him this attention important issue.

  Thank you

  Bryan Pepper - send me an email to * address email is removed from the privacy *.

  Installation not to run, such as Microsoft Security Essentials Package.

  Can I install Microsoft Security Essentials [or any other anti-virus/anti-spyware application] to clean my already infected computer?
  http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• [Urgent] [BBM] Access to users, Messages and BBM Contacts?

  Is there a related API? Or is the platform API social BBM only allows access to the BBM contacts which install my application too?

  Or y at - it no way to display contacts and BBM user messages programmatically? (Not only those who install my apps)

  Here you go...

  1. Only the BBM contacts who installed your application.
  2. Doc is correct.
  3. No, you can not access BBM messages programmatically.  You can use the framework of the call to compose a BBM message, the user can send.

• Display a message in the main method.

  Someone knows how to display a message in a dialog of the main method (before the creation of the Application object)? It is a background application is not possible to put the message on a screen.

  You can use Ui.getUiEngine () .pushGlobalScreen () to display a screen for a user interface application.

• Display a message using #SUCCESS_MESSAGE #.

  Request Express 3.2.1.00.11

  Hello

  This question is about the display of messages by using #SUCCESS_MESSAGE #.

  I have the treatment of next Page > code with after presents the process. This code is triggered when the user clicks a button that uses a branch of the page to the user to another page.

  The branch takes the user to the 10101 page to page 10102.

  I put the Clear Cache = 10101 on the branch.

  BEGIN
  
  INSERT
    INTO dad_assessment_request
  ( tenure_id
  , client_id
  , estimated_area_ha
  , estimated_length_km
  )
  VALUES
  ( :P10101_TENURE_ID
  , :P10101_CLIENT_ID
  , case  when :p10101_measure_option = 'AREA' then :p10101_x end
  , case  when :p10101_measure_option = 'LINE' then :p10101_x end
  );
  
  END;
  
  
  

  In the process of Page Edit > dialog box Messages I placed a process success Message and the error of process.

  The problem is that the message does not appear on the page that the Branch directs the user to.

  If I change the direction to inform the user the current page, no message is displayed or the other.

  How can I treat it the Message to display in the active or branched page?

  Concerning

  Ben

  have you tried setting the success message options branch...

  the 'target' a 'plug' have an 'Advanced' option which is foldable/expandable

  There is a 'Success Message' option, it should be 'yes '.

• Check invalid date and display error message for that forms 10 g or 12 c

  Hi all

  a text element text_fdate is of data type date mask and the format is dd/mm/rrrr

  In this text element that I want to display validation message "you have entered an incorrect date that does not exist.

  When the user enters an invalid date as 30/02/2016 which is not exists.

  What trigger I use and when.

  Florian wrote:

  Hey Hamid,

  GET_ITEM_PROPERTY ('ITEM_NAME', ITEM_IS_VALID);<--it is="" not="">

  Above will work only on the query mode.

  The code works, but the below error code you gave does not work in forms 12 c.

  1. IF ERROR_CODE = 50012 THEN
  2. MESSAGE ("Please enter the correct date.");
  3. MESSAGE ("Please enter the correct date.");
  4. END IF;

  The correct error code is 50004 12 c forms.

  Just change the ERROR_CODE of 50012 to 50004 and it will work.

  I'll check the error code in form 10g and will play with you again.

  I already checked and functional at 10g.

  Hamid

• I created form in adobe acrobat X 1 Professional. Now, I want to put logic on a field. I want that the document will be closed if someone between age under the age of 18. and display a message for minors?

  I created form in adobe acrobat X 1 Professional.

  Now, I want to put logic on a field.

  I want that the document will be closed if someone between age under the age of 18. and display a message for minors?

  The final document is a little drastic... Perhaps simply display an error message? In any case, you can do it like this, as a custom field validation script:

  if (event.value && Number(event.value)<18) {
      app.alert("You must be an adult to fill in this form!");
      this.closeDoc(true);
  }
  

  Be aware that using this code will close the file without saving it, and the user will lose all unsaved data that they have entered.

• How to display warning messages in the OPS

  Hi all
  I have a page where in I have a poplist. When the user changes the value of that poplist I want to display a message window that the "the user must either save the modifications or changes will be ignored. And I want to have two buttons to save or cancel the changes.
  How to achieve this in the OPS as I read that popups are not supported in the OPS.
  And the Confirmation message boxes at the top of a page does not stop the users to perform further processing.
  
  Can someone please shed some light on it.
  Thanks in advance.

  Ginette

  You can join firePartialAction with poplist and make use of the dialog page. For an example of a page of dialog with two buttons you can see the example of Toolbox page remove tutorial.

  Thank you
  AJ

• Display a message after validation

  ADF 11g Adf BC
  
  Hello
  
  I use a train of workflow to allow the user to enter data.
  The task is displayed in a modal window.
  
  At the end, I want to validate the data, display a message like "your data has been created", and then close the dialog window.
  
  To close the window, I use a return of the activity in the workflow.
  I put the message in a pop-up window.
  I have created an ActionListener method in a bean that is committed and then displays the context menu.
  
  Validation works like the context menu.
  The problem I have is that if there is an error during validation, I want to display the context menu.
  What happens now when there is an error that I get the window/popup with error and my window messages, the error message window starts in gray
  
  What is the best way to display a confirmation message after a commit?
  
  Concerning
  Paul

  How are you performing validation, if he uses the operationBinding then operationBindings.getErrors () can give you the errors occurred on the execution of validation

  Example code:

  BindingContainer links = getBindings();
  OperationBinding operationBinding = bindings.getOperationBinding ("Commit");
  Object result = operationBinding.execute ();
  If (! operationBinding.getErrors () .isEmpty ()) {}
  make the invisible popup
  }

  Jean Lou