Display Windows Vista problem.

Similar Questions

• Photos download of Windows Vista problem

  I'm having a problem with uploading photos to my Dell Inspiron 531 that is running Windows Vista. I am taking perfectly good photos with my Canon Coolpix S4100 and downloading for photos with one cable from the camera to the computer. Shortly after they are downloaded, maybe a second or so, they distort: high contrast, low light, 3D effect, shadow. The photos are jpeg, and happens whenever I have download on this computer. They are very good when I download them to my laptop which has Windows Vista. I am only display photos directly via the photos and that is when there are distorted. I also use 3D inspection program and the photos are mixed in there also like in the photos. Any help?

  Might be interesting to try to update your video driver... check
  the site of Dell support for an update for your model.

  If this is not the solution... it could be caused by a color profile.

  Windows 7 & Vista - remove color profiles
  http://helpdesk.wisc.edu/Helpdesk/page.php?id=14020

  Microsoft PhotoBlog of frequently asked Questions:

  http://blogs.msdn.com/PIX/pages/FAQ.aspx#Q6
  Read: "q: why my pictures have a weird color.
  Enter the Photo Gallery (but look good in XP
  Photo and Fax and IE Viewer)? »

• Triple the screen on Windows Vista problem

  Moose title: Triple display problem

  I have a laptop Toshiba A505D and I connect a HP 2159 m 21 "LCD monitor on the left side and keep there for a second monitor, I have a hub of Toshiba DynaDock USB which has built in video card that I run a second 21 '' wide LCD monitor Acer to right of the laptop and the laptop in the center of the two to enter. Usually my office remains in the middle (on the screen of the laptop), but lately when I take the laptop home and use (I even put in place it but different monitors) it "confuses" my lap top and now I can't get my laptop to view the screen of the laptop computer, the primary monitor. It maintains show my toolbar of office and down on the monitor of left or right. I tried to change around, disconnect them them and even rebooted my system a couple of times and it won't change. As soon as I plug the monitor HP it will take the Office to this monitor automatically. I put the monitor Acer on the right side, but not the laptop screen.

  Any help would be greatly appreciated.

  Hello

  First of all, make sure that the graphics card you are using is not limited in support of two screens.

  You can visit the following links and check if it helps:

  Multiple monitors: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/multiple-monitors-frequently-asked-questions

  Understanding multiple monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-multiple-monitors

  Set up multiple monitors

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-multiple-monitors

  Hope this information is useful.

• Windows Vista problems and DVD

  I got in trouble for awhile with my DVD RW
  I can read and write the cdroms.  I can write on DVD without using any additional software but windows.  I can not read or read that DVD software or movies, including software to reinstall windows vista.
  I asked here several times for help and decided to restore the computer to factory settings.
  Then, I followed closely ALL the following:

  *****************
  

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  ************************************************************************

  For the first problem, I received the following message is displayed:

  UNRESOLVED PROBLEM: MEDIA IN THE UNREADABLE CD/DVD DRIVE.  THE DRIVE IS EMPTY OR MEDIA MARKER NOT ACCEPTED.

  I've updated the drivers without success, I deleted the drivers without success.

  I am trying all the new ideas.

  THX in advance

  Remember that the drive is really 4 readers separated in parts of a case if some works do not
  is not uncommon. Rob - bicycle - Mark Twain said it is good.

• Windows Vista problem

  Hello to all friends.
  I am curruntly under xp sp3.
  and I downloaded the sp1 of vista from the microsoft Web site.
  but I'm not able to install it. It always gives error like that.
  Spinstall.exe is not a valid win32 application.
  I downloaded it 2 times and the same problem.

  Here are my pc specs
  motherboard = 946 intel Moose
  processor = 3.0 ghz p4 multiprocessor Moose
  RAM ddr 2 = 1.50 GB
  HDD = 160 GB

  I was using sp2, then I upgraded to sp3 from microsoft.
  now, I downloaded vista but it is not installed. Please help me. and tell me one more thing. Vista sp1 will run on my pc specs? Thank you

  Hi joelbelot

  Thanks for posting on Microsoft Answers.

  To install Windows Vista Service Pack 1, you must have Windows Vista installed on your computer.  This Service Pack is not designed for Windows XP.

  If you want to upgrade to Windows Vista, you can visit the link below for upgrade/purchase Options.
  http://www.Microsoft.com/Windows/Windows-Vista/get/upgrade-your-PC.aspx
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• window vista problems

  I need help. I can't open my control panel. When I click it it opens as an empty file, then disappears. Im guessing this is why now I can't print anything off any more. I also have a problem with the windows updates, that I can't open it to all. My cursor turns into loading then nothing happens. If I highlight the button shortened its windows to say impossible to verify updates? Pls help someone!

  Hi Steve_n17,
   
  I suggest you run a SFC scan on the computer.
   
  To run the System File Checker tool, follow these steps:

  1. Click Start , and then type cmd in the box to start the search .
  2. Right-click cmd in the programs list and then click run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click continue

  1. At prompt command, the following line, and then press ENTER:

  sfc/scannow

  Insert the Windows Vista disc if it prompts for a disk.

  Alternatively, you can follow the article below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  I hope this helps.

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• Update for Windows Vista problem

  I had a virus on my computer and I rebooted just my Dell Dimension 9200 from scratch with Window Vista.  Everything worked fine until I went to Windows Update and installed updates.  Now, I don't see any of my CD ROM drives listed.  When I go to Device Manager it shows CDROM drives (2 of them), but it is said that they cannot be used because the information in the registry is damaged or missing.  I tried to restore the computer to a restore point before installing the updates, I did, but the system restore no longer works.

  After wringing my hands and trying to find and install the drivers without success, I have completely reformatted (AGAIN) and reinstall Vista reinstalled the printer Dell discs (AGAIN) and he did exactly the thing again.   This machine has no new material and ran Vista successfully for about a year before the virus got it.

  On a second note, almost half of the updates do not give an error code that indicates that the computer uses a proxy server.  This is not the case.  I use a DSL line to a medem then my router / switch that I have used for years.  This computer is connected to the router / switch with an ethernet cable.  I use the router so my laptops can connect wirelessly.

  Hello

  Contains the exact error message and the error code that you get when you try to update Windows.

  Follow the steps below and check if that helps you.

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options .

     Note If the menu is not available in the Internet Explorer window, press the ALT key on the keyboard to display the menu.

  3. On the connections tab, click LAN settings , and then click Advanced .
  4. Remove all the entries in the Exceptions section, and then click OK .
  5. Close Internet Explorer.
  6. Click Start and type cmd in the box start the search .
  7. In the list of research results, right click on Cmd.exe , and then click run as administrator .
     If you are prompted for an administrator password or a confirmation, type the password, or click continue .
  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.

  Also try the link to the following article:
  http://support.Microsoft.com/kb/971058

  For CD/DVD player, follow the link below:
  http://support.Microsoft.com/kb/314060

  All the best!

• Windows Vista problem... Help!

  I recently had an automatic update install and reboot (sort of), but when the computer went to restart the operating system starts, so I have no idea of what is happening with my computer. So can someone please help me with my problem

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work, try to make a Bootable ERD to do a Startup Repair:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your falls into the above category: download the ISO on the provided link and do a repair of the disc.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Display Windows Vista SP2 drivers does not

  One day ago, I installed Windows Vista Home Premium 64-bit on Windows 8.1 and now I'm trying to find a display driver. I was the site of AMD for my graphics card drivers, I install them, but Windows never detects. I lived a few people support, but they say that these data are more supported, so I buy a subscription costs $149. The connected graphics card is the Standard VGA display adapter but it says failure to start. Someone at - it solutions to this.

  This has been resolved. If you do not see your card listed, click on the nearest listed driver her name. I had to use the display driver ATI Radeon 8350 to get my graphics card to work.

• Windows Vista - problems

  Original title: I need help!

  Hello

  1. Firstly, safari could not open all downloads and they could not be found anywhere on the computer, even when I right click them safari would say he could not open the file because he had disappeared.

  2. I can't seem to open any AVG or download all the programs to repair or make updates for what it is.

  3. my computer opens all my programs with the internet program, for this purpose, I can't open anything.

  4. the wrost thing is I can not restore the computer because it opens in internet explore and type regedit doesn't do anything because I can not open it no more... Finally, I tried to Open regedit in safe mode, nothing helps...

  Please can anyone help me with any of these problems... my computer is virtually unusable.

  Thank you

  im running windows vista

  You say now that he said the downloads have been a virus and deleted?

  It's a different problem:

  Read the information by The ball in this link if this is correct:

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/i-get-error-message-xxxxxxxx-contains-a-virus-and/fbb5e0fd-63bd-4E01-9a98-6074d33a8fd6

• Windows vista problems install keyboard and mouse

  I try to install windows vista ultimate on a new amd system I've built recently. The windows vista screen Boot starts well, but I can't go further with the installation because the keyboard and the mouse do not work.

  To solve the problem, I booted up with a Linux distribution and I can use the keyboard and mouse and everything works fine. Initially, I bought vista using boot camp on my Mac and the keyboard and mouse work well with vista on this configuration.
  I want to upgrade to windows 8 thereafter, but I might need to buy the whole program, rather than the update if I can't do vista works. I don't want to spend money if I can't because I'm broke. Any suggestions?

  Parameters of the BIOS of some computers have a setting "Enable USB Legacy" to allow the keyboard to work without Windows running.

  If you have PS/2 ports buy an adapter or a PS/2 keyboard. Most USB keyboards can be connected to a PS/2 port using a USB to PS/2 adapter.

• license Windows vista problem

  I have a computer compaq presario c500 laptop comes with windows vista. The operating system was already installed, so it did not come with an installation cd. I had hard drive problems and the service formatted the drive, so I can't use the factoy reset feature that I've done before. I have here some way that I could download a windows vista disc and use the license I got with my windows?

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do it for a small fee

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Repair of window Vista - problem starting - stuck scrolling bar load

  Hello

  Looking for assistance here, if anyone can help, I have a laptop LG R410, age two months running windows vista basic 32-bit.

  Laptop used to start and rest the scroll bar loading.  Tried through 'F8' menu to start in "Safe Mode", but wont even boot into Safe Mode, is the last driver loaded:

  Windows system32 drivers crcdisk.sys

  Also, tried "last good configuration" but nothing is.

  Try to repair windows with the repair disk. but no joy once again, by looking at the details of the diagnosis and repair, it shows repair stalled when the event log diagnostic testing.  It will not accomplish this test, even after leaving during the night.

  Also tried to go back to a restore point, but because it is new, it doesn't show any restore points that were to restore the system back.

  No backup available or go to restore.

  Memory Diagnostic test has been successful.

  Ran sfc/scannow to command prompt, is back with "start scanning system.  This process will take time. "A few seconds later says"Windows Resource Protection could not perform the requested operation. »

  A ran Chkdsk C: /f so none of the bad sectors on the hard disk.  Summary says "Windows has checked the file system and found no problem."  But return the following message at the end summary "cannot transfer messages saved in the journal of the events with the 50 State."

  Any help to help solve my problem would be appreciated gratefully.

  Thank you.

  Hi Ashish,

  Thanks for responding.

  Problem solved, or not!  Hard drive is damaged.  As a result of tests with checkdisk and knowing that he is not really do a thorough job.  I checked the hard drive once more with 'SeaTools' of Seagate.

  The hard drive is riddled with bad sectors.  Filed in support of Service today and they confirmed the hard drive is faulty and they will replace it under warranty.

  Thank you for taking the time to answer my question in the first place.

  All the best to you and the team at Microsoft.

  Kind regards

  Scott Connoilly

• Windows VISTA problems with ".exe" files

  I'm on Windows Vista Home Premium, 64-bit, SP2 on a HP Pavilion desktop computer. Recently developed a problem when you try to run any file with an ".exe" extension results in a window asking to "choose the application I want to use to open the file" or "this file has no program associated with it for performing this action. Create an association in the control panel to define the Associations. " Any ideas?

  Hello
  This problem occurs when your .exe file associations are broken. This is usually caused by a virus/malware that changes the default file associations in Windows. Follow these instructions to resolve this problem:
  Download exeHelper from one of these two links: link 1, link 2 double click on exeHelper to run the fix. A black window should appear. Once the patch is finished, press any key to close.
  Then try following the steps in this virus/malware removal guide: http://www.selectrealsecurity.com/malware-removal-guide

  It contains instructions which will remove most malware infections. If you have any questions, just ask me. I hope this helps you.

  Brian

• Installation/space Windows Vista problems

  Recently the Windows Vista Setup program does not allow the installation of the different software components.  Sometimes I have a vague (as impossible to install) error code, sometimes the installation starts from inside IE and then just comes back to IE. But no installation occurs.

  I am slot as Vista Business 64-bit Service Pack 2. (5 gig Ram)

  I have between 50 to 500 free MB on the disk. (I have a drive c to 35 gigabytes.  But, windows uses 31 G (winsxs uses 20 G).)  Supposedly, it's a problem of Microsoft to know during the years that they have no desire to fix.  I regularly try to clean the space, but it's like trying to hold back the Mississippi...

  Uninstall seems to work.

  I ran various utiilties of Microsoft to try to resolve the problem. (I think this is worse!)

  I ran sfc/scannow and it has detected/fixed no problem.

  When I was able to capture more storage space (by moving my virtual memory on another drive) briefly the problem has not disappeared.  The Publisher of the software after several hours of searching in various newspapers told me it was a problem of Microsoft Installer.

  I don't want to re - install the OS that I don't have a number of my installation for different software products discs (they are all legal).

  I'm not so sure that Windows installs my updates properly at this stage either.

  Any help would be appreciated.  I'm drowning in time to support.

  What is E? The dual computer boot or pagefile on E refers to the operating system in C?

  I did not used Easeus Partition Manager, Partition Magic and Acronis who buy software using, but the principles will be similar. What you need to do is to reduce the size of D, so that there is a free space between C and D, and then increase the size of C in this space. You can then increase the size of D in the original unallocated space of 5.86 GB in D.

  I suggest that you study the knowledge base, and there is a line on manual. Print the relevant parts. The FAQ in the first link and follow two particularly relevant links:

  http://www.partition-tool.com/EASEUS-partition-Manager/FAQ.htm

  http://www.partition-tool.com/EASEUS-partition-Manager/FAQ/technical-faq32.htm

  http://www.partition-tool.com/knowledge-base/how-to-extend-system-partition.htm

  Good luck.