displaying a negative amount

Similar Questions

• Red negative amounts manufacturing

  How can I change the format of 'currency' or create a new format for negative amounts in numbers appear as bold and red font?

  In the earlier version of numbers, you can use the Format menu > show rules of the Conditional Format for example change the color more or less than a specified amount. Of course the current version may have removed or made it more difficult to find.

• Memory management by displaying the large amount of data

  Hello

  I have a requirement to display the large amount of data on the front in table 2 & 7 graphic during the time period 100hrs for 3 channels, data read from strings must be written in the binary file, and then converted and displayed in front of the Panel for 3 channels respectively.

  If I get 36 samples after conversion for all hours, up to 83 h 2388 samples displayed in table and graphical data are thin and samples correspond exactly.

  After that 90 hours 45 minutes late is observed after theoretical calculation of samples, what could be the problem

  I have controller dual-core PXI8108 with 1 GB of ram

  As DFGray,

  says there is no problem with the RAM or display, problem with conversion (timming issue) if I am data conversion of large amount it takes even, compared to the conversion less amount of data. So I modifed so that each data point Sec 1 is convereted at once, problem solved

  Thanks for your replies

• Why Windows 7 displays an incorrect amount of free disk space / used on my DVD - RW drive?

  Why Windows 7 displays an incorrect amount of free disk space / used on my DVD - RW drive?

  Windows 7 can show the incorrect amount of free and used space in serious DVD - RW or DVD + RW media properties.  After burning data on the disk, Windows 7 could show that there are 0 bytes of used space and free space available on the disk capacity.  In reality, the amount of used and free space on the disk is reversed.

• How to exclude from the SOUL of the rules if the invoice distribution amount is < 0 (i.e. the negative amount) to the existing rule

  How to exclude from the SOUL of the rules if the invoice distribution amount is < 0 (i.e. the negative amount) to the existing rule.

  Requirement: I have an obligation to send the invoice approval group approval specified when the invoice distribution account is 4567 and charge the amount of distribution > 0

  Finished configurations:

  1. Set condition: the string value to using 4567 supplier_invoice_distribution_gl_account attribute
  2. The condition set: SUPPLIER_INVOICE_DISTRIBUTION_AMOUNT is greater than or equal to 0
  3. Definition of new rule setting the terms of the 1st and 2nd stage and also group attached to this rule approval

  Note: Approval is not required is defined for invoices IN. matched in SOUL.

  Test case:

  1. Corresponding invoice with PO (PO amount is 8000)
  2. Amount of invoice header 5000
  3. Distribution account invoice 5568 as well as the amount is 8000
  4. Inserted 4567 distribution and quantity is - 3000

  Behavior of real: system sends the approval of the Bill for approval related group account 4567

  Expected behavior: invoice approval status should be 'Not necessary', since it is a corresponding purchase order invoice and 4567 account amount is < 0

  Kindly let me know how to set the rule to exclude the ve - amount distribution associated with lines

  Hello

  Then set a rule all 3 conditions:

  If attribute SUPPLIER_INVOICE_DISTRIBUTION_PO_MATCHED = No. and the SUPPLIER_INVOICE_DISTRIBUTION_AMOUNT attribute is less than the 0 attribute and supplier_invoice_distribution_account = <> then no permission.

  Concerning

  Yvette

• Need to display negative amounts, amounts positive based on the value of the parameter.

  Hi all
  
  I have a requirement in rdf as follows:
  
  I have two or three lines of the SELECT statement. An amount column having both negative and and postivie values.
  
  Based on the value of the parameter I need to take these records.
  
  Say, if the value of the parameter = "Credit amount", then I have to choose the records, the amount column value is negative.
  
  If the value of the parameter = "Debit amounts" then I have to choose the records, which the column value is positive.
  
  If the parameter Value = "All", then I must take all records, including both positive and negative.
  
  Please suggest how to achieve this scenario.
  
  Thank you
  Abdul

  In your where clause to add the following
  and ((& paramètre = "Débit" et montant > 0) or)
  (& parameter = 'Crédit' and the amount<0)>
  (& parameter = 'All'))

  Hope that answers your question
  Sandeep Gandhi
  Independent consultant
  513-325-9026.

• Display of negative numbers as 0

  Box 1: User input

  Box 2: User input

  Box 3: User input

  Box 4: User Input

  Box 5: (zone 1 - zone 2)

  Box 6: (box 3 and box 4)

  Box 7: (box 5 - box of 6)

  If I use the following equation for boxes 5, 6 and 7:

  var v1 = getField("Box_#").valueAsString;

  var v2 = getField("Box_#").valueAsString;

  If (v1 & & v2) {}

  Perform the calculation

  Event.Value = v1 - + v2;

  } else {}

  Event.Value = "";

  }

  * Note for box of 6, the in the calculation is replaced by (+).

  ------------------------------------------------------------------------------------------ --------------

  My question: How can I write this code to produce and show '0' if the equation translates into a negative number?

  Your example in the original post would Box5 result as an empty value and not of-5. Box7 also had an empty field.

  So your example:

  var v1 = getField("Box_#").valueAsString;

  var v2 = getField("Box_#").valueAsString;

  If (v1 & v2) {}

  Perform the calculation

  = Event.Value + + v2 v1;

  } else {}

  Event.Value = "";

  }

  Apply only to box 5 and Box7 Box6 not being Box3 Box 4 but Box3 + Box 4.

  Given that you want to display the results for Box5, Box6, regardless of their values, you enjoy the script would not apply.

  You also add the condition to the field being hidden.

  If the script for Box5 would be:

  var v1 = this.getField("Box1").valueAsString;

  var v2 = this.getField("Box2").valueAsString;

  Event.Value = "";

  Si (v1 ! = « » && v2 ! = « ») {}

  Perform the calculation;

  Event.Value = Number (v1) - Number (v2);

  }

  Box6 would be:

  var v1 = this.getField("Box3").valueAsString;

  var v2 = this.getField("Box4").valueAsString;

  Event.Value = "";

  Si (v1 ! = « » && v2 ! = « ») {}

  Perform the calculation;

  Event.Value = Number (v1) + Number (v2);

  }

  And Box7 would be:

  var v1 = this.getField("Box5").valueAsString;

  var v2 = this.getField("Box6").valueAsString;

  Si (v1 ! = « » && v2 ! = « ») {}

  Perform the calculation;

  Event.Value = Number (v1) - Number (v2);

  Event.Value * = (event.value > 0);

  }

• minute of torso pack &gt; negative amount

  Hello, we ran out of minutes (option beyond 100 people) it is impossible for me to quickly buy packs of minute burst and we have a big Web Conference tomorrow (300 participants).

  What will be the behavior > > past and continue decreasing the amount? or STOP the connections for participants after 100? Please tell me if you met this case

  With a negative balance of 2 480 minutes (50% beyond the minutes has been purchased), you won't be surprised that people are blocked. I am impressed that there is an allowance to go beyond the allotted minutes.

  As you can see the minutes of burst pack can go very fast, as you seem to have used 2,000 minutes in a day. They are intended to be a means of dealing with sessions that can go on your licenisng limts, not a solution to a limit under license. If that's what agitates you to another solution, so I wait, you will find another tool/feature that leads you to be frustrated and moving him as well. This can be a learning and experience of the way to ensure that you don't face this again in the future by putting implemented the correct authorization. I fear that it is a shortcomming of a reseller not clearly explain how work the pack-minute burst, but I'll let that concern you and your dealer.

  I still believe that you would be better suited with a seminar/Webinar room. I use the two terms because Adobe will be chaning names of them webinar seminars rooms rooms in the future. Since I don't sell in France, and I will not go into the price, I'll try to stick with the generic numbers to help clarify why you should watch a seminar with your dealer and start using that instead of a meeting room for meetings which may have more than 100 participants. Say that burst pack minutes costs 100 of which currency you want to use (this isn't an accurate burst pack price minutes but a nice round number for illustration) for 5,000 minutes. As you have demonstrated you can use up to 5,000 minutes very quickly. Now a 500 seat seiminar room will cost you around 13 - 14 times as much as the pack burst minutes for a 12-month unlimited use license. So, let's put the break-even point for the seminar room to 1,400 (also not a number specific, but used for simplicity). If you use 5 000 burst pack minutes for about 3 days, this means that a room of 500 seminar places have would cost you less to 42 days or about 8.5 weeks of business (5 days so weekened are not included).

  I urge you to consider purchasing a seminar room to meet this problem you are having with Connect . No product will perfectly meet every need, but to find the best way to meet your need with a tool that is the best solution for you can take a priceless value.

  Just a thought and good luck with whatever you decide to go forward with.

• HFM 11.1.2 forms/data grids - display of negative numbers

  If you want to display negative numbers differently... red color for example or with brackets instead of the negative sign
  Is there an easy way to do this?
  Is there a way to do this?
  
  
  
  
  Thank you
  PD

  These changes are possible in the user preferences.

• How can I get the data view to display the same amount of time I save?

  I use the Sound and Vibration Measurement Suite.  In the data view, I display a graph of time, the power spectrum, the Color Map and the waterfall.  I am also showing strength in numbers group for several bands and doing cutting-edge research.  I record 100 ms of the transient wave.  In the data view, why the temporal plots show several seconds of data?  What determines how much time will appear in the data view?  More important, the power spectrum reflects the power for the entire of several seconds of data displayed?  Same question for power in the values of band and cutting-edge research.  I want to just this data displayed for 100 ms of the wave that I record.  So, how can I get the data displayed (waveforms) and power numbers come only 100 ms of the recorded wave?

  Finally, what is the best way to make account concisely the recorded data?  By slide numbers on the Documentation tab is not concise, because it comes with graphics, etc..  I tried save as ASCII/LVM, but I get a bunch of stuff intermiated I don't care.  Help?

  Hi TimRsandiego,

  SignalExpress is programmed to display graphs with default scales based on the type of action, it's reading. These scales and settings can be changed by right-clicking on the graph, and then select Properties.

  If you are interested to learn more about how to use SignalExpress, I would recommend checking out some demonstrations/tutorials on NI.com. You can find some of these demos at the following location:

  Let me know if you have any other questions.

  Kind regards

• Windows xp professional sp3 general system control panel displays the wrong amount of system memory

  Have a Dell Optiplex GX280 running Windows XP Pro SP3 with 3.5 GB of memory. BIOS confirms the good memory installed, but the control panel > system > general tab displays only 2.99 GB of memory.  Is there a fix for this issue or Windows using only the first 3 GB of memory?

  If you have Windows XP with service pack 3 - it's a 32-bit operating system.  The most he could use is 4 GB and some of which will be used for overhead costs.  The most I've seen Windows XP with SP3 report was 3.85 GB of memory - although it is more common to see a 3.25 and 3.5 GB.

  Memory shared (with a video device) can also take off the total.  It's usually anywhere from 64 MB to 1 GB if the video device uses the system memory compared to (or in coordination with) committed memory.

  With Windows XP, however, have probably seldom got you much above 1.5 GB of memory space used without some graphics intense or video edition GOLD of virtual machines.  ;-)

  Essentially - there is unlikely to be anything to fix.  If you want to use/manage better memory, you need a 64-bit operating system (I'm not implying Windows XP 64-bit) and possibly a new video device.

• Subfolders are missing & folders are empty, but the properties display the full amount

  I had to restore my laptop to factory settings, but I didn't lose my music library & some other files. Then I copied to my hard drive external and placed in a folder. After the restoration, I opened my external hard drive to see some subfolders disappeared, and records that were there, it shows that they are empty. But when I check the properties, I still see the full amount (27 GB) which was copied in the first place. Even when I copied the file to my external hard drive to my laptop restored, he showed that he copied 27 GB & all of its subfolders. Why can I not see my files?

  Hello

  Maybe the files/folders are hidden.
  Show hidden files
  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• Camera Raw display reverse negative image

  camera raw displays images as if they were an oil slick.  A bit like a variegated leaf.

  I rebooted Photoshop CC 15, nothing helps.  This problem just started.  Windows 7 Pro 64 bit.

  No problem with any other application.  Lightroom and Photoshop works well except camera raw.

  

  Make sure that your video driver and the graphics driver is up-to-date. If they are, then go in Camera Raw and Photoshop preferences and uncheck the option use the graphics processor.

• Help display a large amount of text in a single slide

  Hello

  I met a few cases need to display a lot of text in a single text or slide box.

  In the example below, I want the diagram on the left to be interactive, so when the user clicks on each of the blue boxes a text box appears that displays additional information. The problem is I don't have enough room to display some short bullet points and need to display more information.

  

  Trying to think of ways to show a lot of content in a limited space. Does anyone have any ideas of how I could do this?

  Thank you

  Ross

  Use Interaction of text instead of a form of text scrolling or legend. Or, a link to a pdf file in the correct format that you open in a separate window. Legends of text and the interaction that I'm talking about are much more limited regarding formatting.

• In an Adobe form I need the value of Field3 to display the higher of the two fields, Field1 value or Field2 (compare the value of Field1 and Field2 and display the highest amount in field3) can someone please tell me the script to run this simple comparis

  I have 2 fields that are calculated fields and I need display the higher value of the 2 fields in a third field

  The field names must be in double - quotes. And if you change the value of any field, now, you will see error messages in the console.