displaying a source code of mulib

Similar Questions

• Disabling the display of Source Code on a Web Site

  How do your prevent a user from site to look at your source code by right-clicking of the mouse?

  I wouldn't waste your time. Even if you do not disable right-click on the page, there still many, many ways to get the code of the site.

• the display of the 6.0 source code?

  It used to be under DISPLAY, the display of the 6.0 source code?

  One of them allows to see the source of the page:

  • Tools > Web Developer > Page Source (Cmd + U)
  • Right-click on a web page to open the shortcut menu and select the Source of the Page

• How do you define an external display of HTML source code?

  I want to stop using FireFox built in HTML source code viewer and use an external viewer. Tools | Options provides no way to do this. Poking around the subject: config doesn't reveal anything either.

  Surely this question has been asked and answered a million times already, but when I try to look for it on the web page of Mozilla support I earn millions of hits of garbage on PDF files - and I can't find a way to do an advanced search that excludes the word "PDF". Even the obvious assumption to put "-pdf" in the search field does not work. Even more mind-boggling: If you search for "advanced search mozilla support" comes only garbage - nothing on how to do an advanced search.

  You can watch these prefs to use an external viewer.

  • http://KB.mozillazine.org/view_source.Editor.external
  • http://KB.mozillazine.org/view_source.Editor.path
  • Dafizilla ViewSourceWith: https://addons.mozilla.org/firefox/addon/dafizilla-viewsourcewith/

• In IE10, I can see the source code - not in Firefox

  IE10, I click DISPLAY and then click the SOURCE and I see the source code.
  Firefox does not have the code source Shiwa.

  Hello

  You can use one of the following methods to view Source in Firefox:

  • Firefox > Web Developer > Page Source
  • Tools > Web Developer > Source of the Page (Ctrl + U)
  • Right-click on a web page to open the shortcut menu, and then select View Page Source

• Since the update today, I post is no longer the source code

  After Firefox update today I have more have the option to display / source (code)
  How can I restore it?

  The menu item has been moved.

  • Tools-> Web Developer-> Page Source
    The keyboard shortcut is Ctrl + U

• Real-time application does not work; source code works very well

  The short version is I'm programming a cRIO and apparently the RT code isn't running after you deploy, and I can't understand why. It is further complicated as I do all this remote and I don't have direct access to the unit since I am 500 miles away. I work through a couple of other guys who know some LabVIEW, but neither is working on the site so that they explicitly trip there whenever I have a bright idea.

  I was there a few weeks ago. During this time, I created a code simple cRIO, since I'm new to the cRIO, allowing the user to move a control and change a chart. It worked fine, but I must stress that it did not have a FPGA component. After that, I worked on the actual code, which reads some sensors, displays the results on a user interface and stores the results. Did FPGA. I used it in the LabVIEW environment and it worked fine, but I ran out of time before I could finish a release build and deploy the RT as a compiled application. I sent them the version later, my contact deployed but had the network stream errors during execution of the user interface.

  After hours to address network problems and sending over debug versions, I tried to create a log on RT level so I could see what was going on. The journal is not yet open, even if it is the first command in the code. I have pores through the forums and found http://forums.ni.com/t5/LabVIEW/cRIO-Troubleshooting-creation-and-deployment-of-startup/td-p/1956475... which took a new direction.

  I had my contact use the RT debug console and when it pulls up to the front of the RT, it shows an arrow broken at delivery. He clicked and nothing happens - no work, no list of bugs. If he shoots to the top of the list of bugs manually, it is empty. Again, the RT works very well if you run it through LabVIEW and not as an application compiled in real-time. He also noticed that the open FPGA VI was grey on the block diagram. Are no other icons.

  If the problem seems to be that the compiled application of RT becomes some kind of error, but do not tell me what it is, and it seems to be related to the opening of the FPGA. I recompiled the FPGA and RT. I recompile the RT himself, but not the FPGA, because this would take hours. It is download everything properly for the cRIO. The RT is set to run automatically. It is restarted the cRIO whenever he deploys the RT. They have LabVIEW on a computer, but it doesn't have the correct drivers to run the code of the environment of LV. I am to resist have them install the dirvers because downloading big files is complicated due to the restrictions of security as well as a lousy connection at a remote site. In addition, it does not solve the problem of RT executable doesn't work is not the same as the source code, which, according to the thread above, seems to be a thing.

  The last thing I'm getting is that I sent her instructions for how to build a source distribution of the project that I sent and try to deploy on the cRIO. Even if it works, I'm not sure that this is an acceptable solution, because I assume running VI, rather than the EXE is slower, and they need to speed on this project.

  Simply, I don't know where to go from here. I probably need to get direct access to the cRIO and I might be able to convince them to ship to me so I can understand this point, but I don't know where I got same departure other than the Voodoo debugging standard of "trying stuff randomly until something works". I am open to suggestions, if someone managed to solve this before.

  Code snippet of the first part of the project is fixed, although I don't know how much what good it will do. I am really confused, and the customer is frustrated with how much budget is going to solve this problem.

  
  

• Where can I download the source code of the kernel for Iconia A1-830?

  Global - download.acer.com I can only find the source code of the kernel for A1 - 810 and 811 - A1, but for A1-830 the source code isn't there.

  We do not display the kernel for all products sources, however, I sent a message to our product group to see if we have the source files, we can publish. I recommend that you check in 5 to 7 days to see if we are able to view the files.

• How to return to a CSS - Styles.css file two next to Source Code

  Then I made the mistake of editing of this line of code (because when you look at in the browser - it was just HTML with no CSS):

  < link href = "file:///Macintosh HD/Users/erikj7/Documents/Adobe/Dreamweaver/Projects/Styles.css" rel = "stylesheet" type = "text/css" > ""

  When checking this via html code checker.  He said there is a mistake and this line should not be a space, so I did this:

  < link href = "file:///Macintosh HD/Users/erikj7/Documents/Adobe/Dreamweaver/Projects/Styles.css"rel="stylesheet"type="tex t/css" >

  Just remove the spaces between the .css and 'rel AND style sheet' and type =

  As you may know - it worked at all, so I changed it back.  This posed a new problem showing only HTML, so I corrected this line of code back to its original form.

  The problem going forward is that Dreamweaver displays two Styles.css next to the Source Code in my tab named index.html (not sure what this window of Dreamweaver is called).  The Styles.css which is closer to my Source Code is empty but I think direct CSS still work.  Next to the Styles.css, I have the other Styles.css, and that one is full of code that extracts of my project of.  This Styles.css works and allows me to modify the existing CSS, however I can't not (in Source Code) insert a new image and then apply CSS, because when I go to the CCS designer and add a selector, he wants to put in the empty CSS file.

  How to get back there showing a CSS next to the Source Code? AND maybe if allowed within this same thread, could someone explain why the CSS works fine in the browser of Dreamweaver, but not when I go to preview in the browser (like Safari or Chrome)?

  I could go back in Time Machine on my MAC and enter the old file, but I would really like to know how to fix the mistake that I did, because it's possible I could repeat this error, and it would be good to know why, he does not appear CSS at the preview and Safari and Chrome.

  Thank you very much for reading and possibly help.

  Work within a defined local site folder?

  It's a critical step 1 before beginning any new project.

  

  Once your site is set correctly, you can see your site files in the files (F8) Panel.

  Open your HTML document.  Select design mode in the selection list.

  Switch to Code view.

  Remove the old links of stylesheet from your code.

  In the files Panel, click, drag & drop your CSS file in the HTML code.  Place it just above the closing tag.  See screenshot.

  

  Nancy O.

• Hard to find while coding source code - size of the cursor can be changed or rate of improved blink while in the cursor code view?

  On the retina Mac 5 k - work in Dreamweaver code - normal display mode. After you find the cursor in the code when editing source code. Is there a way to make the cursor itself more "BOLD", a different color, or change the visibility of markup/blink?

  Dreamweaver is not the settings for this.  But the fact of your operating system.

  To change the size of the cursor in Mac OS x:

  Choose Apple system, universal access preferences.

  In the mouse & Trackpad pane, use the slider at the bottom of the window to change the size of the cursor.

  Nancy O.

• JSF - lack of source code using the creation of models and composition

  It's really strange, or maybe I don't understand JSF.
  
  Supposedly to make the long story short, I have the following:
  
  a. masterLayout.xhtml file - primary model
  b. file myPractice.xhtml - compositions that uses templates to file masterLayout.xhtml
  
  masterLayout.xhtml page go to myPractice.xhtml (using ajax). The myPractice.xhtml rendered correctly - shows all components of the model and its own page. But when I check the "see source code page", I see the source code of masterLayout.xhtml.
  
  Here is the part of the source code:
  
  IMPORTANT NOTE: masterLayout.xhtml has a COMMANDBUTTON RICHFACES (a4j:commandButton) WHICH RENDER THE PANEL ID "MyPractice" FOUND IN myPractice.xhtml. Means that this rendering of the page via ajax commandButton control.
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  masterLayout.xhtml (model)
  
  :
  < a4j:commandButton styleClass = "#{control.myPracticeStyle}" value = "MY PRACTICE" action = "myPractice' actionListener =" #{control.myPracticeAction} "make = 'myPractice' / > '.
  :
  < style tr = "height: 780px;" >
  < style td = ' width: 8%; ' > < table >
  < style td = ' width: 8%; ">
  & #060; br / >
  < name ui:insert 'content' = >
  < / ui:insert >
  < table >
  < style td = ' width: 8%; ' > < table >
  < /tr >
  
  < /table >
  
  < / rich: panel >
  
  < / h:form >
  
  You can see the ui: insert above.
  
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  myPractice.xhtml
  
  "< ui:composition template="/templates/masterLayout.xhtml ">
  
  < ui: set name = "content" >
  
  < id rich: panel = "myPractice" style = "height: 764px; border: 0px; padding: 0px; ">
  
  < table width = "100%" border = "0" cellpadding = "0" cellspacing = "0" >
  
  < b >
  
  < style td = "width: 100%;" >
  
  < h:panelGrid style = "width: 100%;" cellpadding = "0" cellspacing = "0" >
  
  < f: facet name = "header" >
  
  < h:panelGrid style = "width: 100%;" cellpadding = "0" cellspacing = "0" columns = "5" columnClasses = "overviewTabColumn, aumTabColumn, feesTabColumn, cashFlowTabColumn, emptyTabColumn" >
  
  < a4j:commandButton styleClass = "#{control.overviewStyle}" value = "OVERVIEW" action = 'Preview' actionListener = "#{control.overviewAction}" make = 'Preview' / > '.
  
  < a4j:commandButton styleClass = "#{control.aumStyle} ' value = 'AUM' action = 'aum' actionListener =" #{control.aumAction} "make = 'aum' / > '.
  
  < a4j:commandButton styleClass = "#{control.feesStyle} ' value = 'FEES' action = 'fees' actionListener =" #{control.feesAction} "make = 'fees' / > '.
  
  < a4j:commandButton styleClass = "#{control.cashFlowStyle}" value = "CASH FLOW" action = "Cash Flow" actionListener = "#{control.cashFlowAction}" make = 'Cash Flow' / > '.
  
  < h:outputText value = "" style = "width: 100%;" / > "
  
  
  < / h:panelGrid >
  
  < / f: facet >
  
  < / h:panelGrid >
  
  < table >
  
  < /tr >
  
  < b >
  
  < td > < table >
  
  < /tr >
  
  < b >
  < td >
  < name ui:insert 'subContent' = >
  < / ui:insert >
  < table >
  < /tr >
  
  < /table >
  
  < / rich: panel >
  
  < / ui: define >
  
  < ui:composition >
  
  This set define supposed to go in the ui section: masterLayout.xhtml insert.
  
  ===================================================================================================
  
  Source of real "see Page" FireFox or IE when myPractice.xhtml is made and displayed.
  
  < style tr = "height: 780px;" >
  < style td = ' width: 8%; ' > < table >
  < style td = ' width: 8%; ">
  & #060; br / > < = missing source code?
  < table >
  < style td = ' width: 8%; ' > < table >
  < /tr >
  
  < / div >
  < div >
  
  "< input type ="hidden"name ="javax.faces.ViewState"id =" javax.faces.ViewState "value ="-2088890247043631074:-2632132869735171398 "
  AutoComplete = "off" / >
  
  < / make >
  
  < / body >
  
  < / html >
  < / ui:composition >
  
  If you look at this "source code" view Page"carefully comparing to masterLayout.xhtml, from the height: 780px, you will notice the name of ui: insert section = 'content' is... empty.

  When you "view source" you made an another GET, that renders the page in its original state. It is not the source as it is currently displayed for example after a button push.

• Source code / application of fiction

  Hello

  This tool is fantastic and saves me a lot of time, helping us find some interesting bugs (as why 'delete myarr.pop ()' was seen such a strange side effect when the table contained channels...).

  I'm trying to get my hands on the source code for this but my clients cannot connect SVN, I tried a lot of different configurations (work, home connections and mobile) network and HTTP connections both SVN, so I think the question is about the end of Adobe/SoureForge. Can anyone check/fix this?

  The reason for wanting the source is to add a minor change the viewer Tag / Tag Information out. Currently I'm working on what the function is defined at offset 0x348B2 of my SWF file. I see in the hex editor, but it is difficult to establish what is the name of this function: the class is defined in offset DoInitActions 200492 and length 24355 i.e. a large class.

  My hope is to add offsets in each row in the DoInitActions 'Information Tag' Panel, so e.g. instead of:

  If L63

  push $1

  Press "isMouseDown.

  getMember

  pushDuplicate

  I see you:

  1522: If L63

  1527: push $1

  1527: push "isMouseDown.

  1534: getMember

  1535: pushDuplicate

  etc., where the number at the start is the offset of this directive within the DoInitActions tag.

  If anyone with the source can do this and updated the binaries then great but I suspect it's something I have to do it myself... but currently, I can't source without having to individually, find and download all files :-(

  Thank you

  Andrew

  A new version of SWF investigator came out Friday (version 0.6.2) and I will update the repository of open source in the next day or two.  When the update is finished, I'll reply to this topic so that you know to pull down the latest version of the source code.

  For SVN access, I used TortoiseSVN on Windows that is supported by SourceForge: http://sourceforge.net/apps/trac/sourceforge/wiki/TortoiseSVN%20instructions

  The logic for your feature request already exists in investigator SWF but it is currently made in comment. For the next version, I can work on enabling it. If you want to play with the feature in the interval, then the code is in SWFInvestigator/src/decompiler/tools/Disassembler.as.Within this file, there is a function called, 'start '. In this function, there is an if block that checks the "showOffset. You will need to uncomment the out.print () statement in the if-block showOffset. You can set showOffset to true just before the if statement. Recompile the application and it will start to display the information you want.

• source code in the string form

  Hello, I would like to ask, if it is possible to set the entire source code as a string variable.

  I need to do a complex search and replace and search dw and replace funcions with regexp does not,

  I want to work with the entire source code as variable and use javascript to change something

  no idea how to do this?

  conrectly I need to convert this:

  "< img src="/blabla/blabla/image.jpg?blablablabla "alt ="alttext"class ="image"width ="100"height ="100"/ >

  TO:

  < component format = "url" name = "component/image.jpg" start ="& lt; img src = & #39; "end ="& #39; ALT = & #34; alttext & #34; class = & #34; image & #34; width = & #39; 100 & #39; height = & #39; 100 & #39;  / & gt; "/ >

  I don't think it is possible to find and replace and regexp, mainly because the image attributes can have different order. but the use of some functions in javascript is simple.

  do you know how to get a source to the string, and then again on the document?

  Thank you

  Hello st3n,.

  Not sure I understand exactly what you're trying to do, but in the Dreamweaver API, dom.source.getText () will be the source of the entire document as a string. You can then manipulate it with the JavaScript code with Regex functions.

  Then dom.source.insert () allows you to insert some source code that you want in the document.

  You can find more information in the section Help Center, API of Dreamweaver, Code, Code display works.

  Xav

  MyDreamweaverExtensions.com

• Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  Woman updated its iPAD Pro 10.0.2 and is now locked screen display "Enter Access Code, contact ID requires your access code when you restart the iPad." She has no idea what is an "access code". Any help is appreciated.

  If she don't remember: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• Firefox 41.0.2 long lines don't wrap when you view the source code

  When I try to view the source code of a web page, I have to use horizontal scrolling. How can I make the text as it does on my IE6?

  If necessary, you can change the setting in this way as well:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste wrap it up and make a pause so that the list is filtered

  (3) double-click the preference view_source.wrap_long_lines to switch the value from false to true