Focusrite with iMAc

Similar Questions

• BlackBerry Smartphones quite confused newbie with (iMac) & Blackberry Curve 8530 ordered

  I thought I posted this before but can't ind station. Maybe I'm in the wrong bench?

  Need to synchronize information on BB Curve 8530 with my iMac, Mobile me up and use to sync iPod Touch - questions are:

  1 can I disable MM before you install Blackberry software for Mac (Snow Leopard)?  I need to be able to sync contacts/address book, iCal with the new phone and am afraid of conflicts so I don't "disable Mobile Me.

  2 have you also looked at Mark/Space software to sync Curve 8530 - it might be a better program to sync with iMac - someone uses this or do you use the Balckberry software?

  3. do I have on the right forum for these questions I changed my subscription and I am in the right but not sure, so pls be kind enough to redirect me...

  thx for your patience.

  Hello, petunia

  Before you install the BlackBerry Desktop Software I would recommend support to the top of your address book and iCal on your Mac. Do this please open your address book, and then select the file (in the top menu) > export > Address Book Archive, and then click Save and placed on the desktop. Let then open iCal and select file > export > iCal Archive and click Save to place them on the desktop as well.

  You are now ready to install the BlackBerry Desktop Manager on your Mac. You don't need to disable mobile me to do this. After installation, restart your Mac and open the app to BlackBerry Desktop manager (it will be located in your main applications on the Mac folder). Follow the on-screen instructions to connect your smart phone BlackBerry for Mac.

  After the device is recognized and connected, you will have to configure synchronization settings. To do it please click on the items you want to synchronize under information and then select two way to sync with the calendar to sync or Sync Contacts(In the middle of the page). Once this operation is complete, you can go ahead and click the sync button located on the top right to start the synchronization process. During synchronization it will alert you that it's your first synchronization and it is recommended to replace the data on the BlackBerry smartphone. Please select this option to overwrite the data so that all the information of iMac you will be synchronized on your BlackBerry Smartphone.

  Once it is complete, you can eject your BlackBerry Smartphone by pressing the key of eject located in the lower right of the program.

  Thank you and you defenatly in the right place!

• Burn DVDs with Imac 2015...

  Hello Forum,

  I just updated my Imac 2011 and bought a newer Imac 2015 and I forgot it doesn't have a DVD/CD player.  Question I'm looking for recommendations on what to buy to be able to burn DVDs, play, DVD and CD.  I have customers who still use the DVD and need to burn and create menus that I am probably able to do with DVD Studio Pro?

  Thank you!

  -Tony

  Apple sells an external USB optical drive specifically for use with models that do not come with an optical drive. You will find in the store.

• U28E590D monitor connect with IMac 5 k (not compatible.?)

  Hey guys

  It's crazy to my imac 5K can find the monitor and connect too, but the monior is black.

  and when I connect the monitor with my macbook pro it works very well.

  try to go to system-> Preferences-> grouping windows display and then decrease the screen resolution until it works

• Bootcamp partitions not bootable with iMac 2015

  Hi guys,.

  I tried to install boot camp on my iMac (late 2015, Fusion drive) without success.

  • Download a picture ISO of Windows 10.
  • Point the wizard Boot camp on the image.
  • Create a partition for Windows.
  • Click install and wait until the end.
  • Restarting the computer but boots directly in OsX.
  • I can see that a new partition has been created with the fat. But it is not present when you start 'startup disk '.

  All the tutorials and guides on the net seems to focus on the use of USB sticks to accommodate the installation of Windows, but I can understand, with the new iMacs installation of Windows is supposed to be hosted on an additional partition. I do not see such a partition.

  Anyone have better luck than me?

  Use the official guide Apple - https://help.apple.com/bootcamp/assistant/6.0/ .

  You must make sure there is no storage devices external or connected hubs.

• Problem with iMac Start Up - file flashes and no sound

  Hello.

  I was using my iMac mid 2007 earlier today, when he started to slow down, with the color wheel appearing whenever I tried to click on something.

  I left only for a few seconds, thinking that he just needed some time, before the screen went all white. I turned off the computer in decision-making, tried to restart, but after several attempts to turn it back on, all I get is a white screen and a file flashing with an exclamation mark on the subject.

  I tried the cmd + R trick, but it does not work and there is also no startup sound, that is, or so I read, when you're supposed to press these keys.

  According to me, the iMac has been updated to OS X El Capitan (10.11), otherwise this was Yosemite, but I don't know what level of the update, I was on. I can't access the computer for you tell all the other details, but I'm sure he had a memory of 4 GB, I have improved the memory myself.

  Thanks for any help you can give me.

  The flashing? means that it cannot find your hard drive. Looks like your hard drive is faulty / failed.

• Why mice don't unplug with iMac?

  I've known iMac strange behavior.  Now, on a regular basis, then do not use the iMac a few minutes for somewhat longer periods, my wireless mouse does not connect to the screen longer.  Its pointer is always visible and it moves, but the mouse clicks do nothing to start the activity.  So I'm forced to make a motor stop just to regain functionality.  I also tried to use my USB mouse without success.  Recently, I had to reset the NVRAM because of problems of cycle sleep-too, then maybe there is something I need to do to regain full function of the mouse.

  This is probably just a small problem with OS X, then follow this tutorial to learn how to update to OS X El Capitan:

  http://www.Apple.com/OSX/how-to-upgrade/

• MFP M277 dw: Color LaserJet MFP M277dw Pro issues with iMac

  I have a 2015 21.5 "iMac running El Capitan (10.11.3) and a HP Color LaserJet Pro M277dw MFP that falls in offline mode when it is idle for a while.

  Once the Mac has been sleeping, I can no longer copy, scan or fax without having to restart the printer and the iMac. And it is intermittent. This does not happen everytime the iMac goes to sleep, but no doubt it happens once or twice a week.

  The printer is connected both wireless (so that I can print from my iPad in other parts of the House.) and directly to the iMac via USB.

  I have updated all the HP software related and have applied the last update of the HP firmware for the printer as well. I also ran through all the game instructions that were provided with the printer.

  Other troubleshooting tips would be greatly appreciated.

  Hi @RBurgett,

  Thanks for joining the Forums of HP Support for a solution to your fall issue offline printer.

  I understand you have a HP Color LaserJet Pro MFP M277dw connected to a wireless network for your iPad and connected with a USB to your iMac running Mac OS X 10.11.3 El Capitan, but the drops of the printer is offline after has been idle for a while and becomes also insensitive after mode "Eve". I would like to help with that.

  If you see the message on the printer offline on the iMac, it would be because the iMac think he's using the wireless printer, when it should be using the USB connection.

  You should be able to solve that by unplugging the USB cable. Once the USB cable is removed, reset the Mac printing system. If you don't know how to reset the Mac printing system, here is a document of support that can help - reset the printing system.

  After printing Mac system has been reset, you should be able to reconnect the USB cable and add it to printers and Scanners.

  As far as being not able to copy, scan or fax without having to restart the printer and the iMac that could be solved by resetting the printing system and making sure the USB printer is listed in the printers and Scanner. When the printer seem to be insensitive, the first step is to perform a reset of the power on the printer.

  

  Please let me know if that solves the problem, or if you need assistance.

• Trouble with iMac connecting directly to the modem

  I have an AirPort Extreme, provision of a wifi network in my house. It is connected to a modem Concast Cisco DPC3941T model.

  I planned to connect my iMac (retina 5 k, 27 "running 10.11.3) directly to the modem and not use wifi to connect to the Internet.  I plugged a bolt of lightning for the Ethernet card in and ran a cord to the Cisco modem, but the iMac doesn't recognize this connection.

  Network preferences says "Thunderbolt Ethernet has an assigned IP address and won't be able to connect to the Internet."  Sorry, don't know what that means.

  The reason behind the try it is that my wifi signal is de-energized intermittently and I can't understand why. So I thought that if I plugged the iMac directly I could avoid the abandonment wifi issues.

  Thanks in advance for your suggestions.

  You have removed the Airport Extreme?

  If you connect the computer directly into the modem, the ethernet indicator lights on the router. It is essential for the ethernet work.

  Using an ethernet cable, you bought? If it's super long they can give trouble... a short cable should be fine.

  If you are not sure the little light on the AE plug the computer by ethernet in the extreme with a cord short... lights... If so, you can plug the cord of the cisco to another port ethernet on EI and make sure it works too.

  Network preferences says "Thunderbolt Ethernet has an assigned IP address and won't be able to connect to the Internet."  Sorry, don't know what that means.

  Ethernet is not connected or DHCP does not work. If the modem has been bridged it won't work, unless you turn off the modem for about 20 min. Then launch new follow-up to the computer.

• Photosmart 5510 e - all-in - One: Photosmart 5510 - scanning with iMac does not work

  After you have reinstalled the SW printer via the home network, the scan function is not visible when I opened the printer on my iMac. After the first installation has worked well. Then I had to reinstall all the SW on my Mac, so I lost the first installation of my printer. What can I do?

  Hi @HWEB

  What happens when you try to scan? Do you have a message of error before or during transmission scan, or do the software is not open? Maybe you can not locate the software now, or the software cannot communicate with the printer.

  While I wait for you, if the problem occurs when you print from several programs, please follow the steps below and let me know the results of your efforts.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Manually uninstall the remaining files potentially - I apologize in advance is not a fun task! I'll try to make it easy to follow. Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

  Move the files or folders to the Recycle Bin, drag and drop

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.
  Turn it back on.
  Empty the trash.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• HP 8610: problem printing of PDF files with iMac

  I have a HP 8610 all-in-One powered by an iMac.

  I have a problem with printing of PDF files.

  When I print, the page moves approximately 1.5 inches down and doesnot print page as seen on the screen.

  I checked with Apple and you s not a problem with the computer.  They say that there must be a parameter that must be corrected with the printer.

  If you encounter the problem with PDF files and only on the Mac, the best solution may be to download and run a different PDF Viewer that allows you to open the file and print instead. Adobe, Foxit, and Nitro are a few free PDF viewers with Mac support.

  Please let me know if you are able to print your PDF documents using one of these programs instead, or if you have any other questions. If not, have a great day!

• using HP Deskjet 2540 with imac G5

  Hello

  just bought an imac G5 and can't make it work with my HP Deskjet 2540 either wired or wireless?  Some States not supported on the CD, and once again when I try to download the software online.  Any suggestions?

  Thanks WJ.

  Hi Williyjohn,

  What version of Mac OS X is on the Mac G5? How can I find which Mac OS X Version is on my computer?

  2540 Deskjet will not work with 10.5 and below, it is only compatible with 10.6 and above. I suspect that you have an older operating system on the Mac and therefor, the software cannot be installed.

  It might be a good idea to buy a newer Mac.

  Please go on the HP Forums!

• Color match Photosmart D7260 with iMAC

  Hello, I have an iMAC Intel Mac running on OSx Mountain Lion 10.8.4.  All software are up to date including the printer driver software automatically updated. When I print pictures in color, the colors do not match. I got it correspond exactly to 100% in the past. Does anyone have a solution for me?  Thank you!

  Well, I understood what is happening. You don't have a color ICC profile on your computer for this printer.

  Why?

  Because you use the Apple HP drivers for this printer. This isn't necessarily a bad thing. However, it is not the same to have full feature software and drivers that come on the disk with the printer or download it from the HP website. The bad thing is this printer is not only the software for your version of Mac OS X. It's a pretty old printer and there been no drivers and full software functionality of HP since OS X 10.6.

  I'm sorry, but you need to upgrade to a new printer or doing without ICC profiles

  Kyle

• 4 k editing help with iMAC "End of 2013"

  Hey guys

  I hope someone can help me. Recently, I bought a DJI Osmo. I started to record in 4 k. I used to edit in 1080 with no problems on our iMac. Now, with the edition in 4 k, he becomes so nervous that its virtually impossible to change.

  So far, I've completed a disc clean up public services. Delete most of the files etc (I have 100gig free space of 1 TB). I cleaned my desk so absolutely nothing is running. Computer restarted to refresh the systems only run Premiere Pro CS6 and then start editing. Whenever I play a 4 k clip or watch the preview, he gets very nervous. Now whenever I watch an excerpt my CPU % is allocated 0.5 for first (idling) to 200% of the CPU.

  The system and the card I have is the following:

  iMac 27 inch end of 2013

  Intel Core i % 3.4ghz

  8 GB 1600 MHz DDR3

  NIVIDA GeForce GTX 775 m 2048MB

  Any help is greatly appreciated. Please explain in a more simplistic as possible form. Also I am not eager to reduce to 1080. Want to really get the vids from 1 or 2 to 4 k and see what they look like. For your information, these videos are intended for Vimeo, Youtube, and Facebook.

  Thank you

  The fundamental problem is that the files of the OSMO are difficult to read for ANY computer. As Jeff said, h.264 is hard work for your computer, read, and the OSMO files are really quite large for what they are. This combination means that you will have a much easier time if you convert your videos in a codec that your computer can play more smoothly, such as ProRes or DNxHR.

  If you do this first, it will be much less strain on the CPU because he won't try to decode the images in real time.

• Work of what SSD the best with iMac 2013 for After Effects CS6 Max

  Hello

  I'm running Ae CS6 version 11.0.4 on one

  iMac

  27-inch, late 2012

  3.2 GHz intel Core i5

  32GB DDR3 1333 MHz Ram

  Hard drive 7200 RPM

  Graphics - NVIDIA GeForce GTX 1024 MB 675MX

  I have a 64 bit OS

  OS X 10.9.5 (13F34)

  When I try to use 3D drawn with RADIUS my computer is practically useless.

  Is there a way I can set it up to work as what?

  Or,

  Do I need an SSD for the max?

  If so,.

  Please give me some suggestions of good compatible SSD for my iMac?

  Unfortunately C4D Lite does not come with CS6. CS6 options include Boris FX, Zaxworks 3D element and a few others. If you make a life with AE then one of these plugins will allow you to save more than their cost in a few projects. I would like to try the demo versions to see which suits you best and who do the job with the least amount of fussing around.