Distance options do not present

Similar Questions

• HP Officejet Pro 8600 Plus: printing and scanning option is not presented when one clicks on destop icon for HP printer

  When I click on the HP printer on the desktop icon, it does not open the usual window for all functions of the printer.  I just get a notification asking if I want to leave the program to make changes to my pc.  Also, when I click on the option of printing a pdf document, the print window that opens only allows me to "Save" the document not printi TI (the 'save' button is substituted for the 'print' button).  Can I save the document and print then after I opened from my windowssaved file, if the printer is working and will analyze in the screen of the printer associated with the.  This is done via the wireless connection, so it works.

  Hello

  Try following the steps listed below and check if it can help, the steps for Windows 8 is also applicable for Windows 10:

  http://support.HP.com/in-en/document/c03640384

  If this does not help, try following the "printer software installation & screen opens instead of HP printer Assistant" section below:

  http://support.HP.com/us-en/product/HP-OfficeJet-4630-e-all-in-one-printer-series/5305049/model/5305050/document/c04714314/

  About the "print" button, I guess that's not related wit the real software problem:

  Google chrome opens the print dialog box, and then press the button change.
  Select your printer from the list instead of the default save as PDF option and try to print again.

  Shlomi

• Satellite A200 - Touchpad drop-down vertical does not present

  I just installed Windows 7 on my Toshiba A200 and downloaded the drivers for the touchpad of the Toshiba site.
  However, the related vertical scroll activation option is not present in the settings.

  Can I do to solve this problem?

  Thank you.

  Hello

  You must install the Synaptics and the driver of the Alps touchpad.
  Then you can activate the vertical scroll of the Panel-> mouse->-> settings pointing devices.

  Take a look in the L500 series... you will find the two pilots of the touchpad

  Welcome them

• Not present additional results in real estate to TestStand 4.0

  Hello

  I want to use a multimeter to save the current values in my TestStand 4.0
  test sequence. I was using TestStand 4.1 and recorded the results
  end of my report. I had checked the option additional results, but this
  option is not present in 4.0. Where can I find this option to save the
  value in my report?

  I used TestStand 4.1 but had to return to TestStand 4.0

  because some modules, I want to use only are not supported in TestStand 4.1 yet.

  Thank you

  If you proceed as numerical limit to evaluate the measured value, the result will be the part of the report unless you deselected the "include measures" in the report options.

  This is in any case recommended to include the measurement values in your report.

  You can add additional results using the 'ReportText' variable in the container - Step.Result. Just use a postexpression to convert your value to a string and put it on the ReportText (something like: "Result.ReportText = str (locals.mymeasurement)" "").

  hope this helps,

  Norbert

• The blackBerry Smartphones "Internet e-mail account" option does not not to the BB Bold 9780

  I have a new BB Bold 9780 bought a month back. I package unlimited BIS and should be able to set up 10 e-mail accounts, I think.

  The problem I have is with the "Internet mail account" option in the accounts of e-mail in Setup. When I click on this option, nothing happens. The option does not meet my click.

  I know I workaround for configuration through some links e-mail account in internet and I have already set up my account gmail via the link. I would, however, have the option to add a new account via my mobile itself.

  I suspect that the problem is due to an incorrect update / failure "Email Setup Application". The version I have is 6.10.0804.1543

  Is it possible to get this updated program? or to get the option "Internet mail account" working in my BB?

  I'm unable to remove the program through the management of applications, as the DELETE option is not present.

  Thanks in advance.

  Concerning

  Damien samba

  Hey sugeshsahadevan,

  To solve your e-mail configuration problem take a look to the workaround that is described in this article: http://btsc.webapps.blackberry.com/btsc/KB26055

  Thank you.

• The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  What version of photoshop are you?

  The red eye tool should be in the same location as the healing brush and Patch tools.

  

• Satellite L500-13Z - HDD recovery is not present

  Sorry for my very bad English first!

  I want to reinstall Win7 but the recovery of HARD drive menu on the screen (Boot, F8, repair,...) is not present in the menu.

  If you n t understand my question, can u send me the web address of the French forum?

  Thank you

  Hello

  At first, I must say that your English is good and understandable.
  So, back to your problem.

  If it is not possible to repair my computer option is not available in the installation of HARD drive recovery advanced options of booting (from the recovery image stored on the HARD drive).
  It can only be done with recovery DVDs.

  You have created recovery DVD suite Toshiba tips and how to proceed?

• NI LabVIEW driver for the SRS DS345 function generator generates error "(Hex 0xBFFF0011) insufficient location information or the device or resource is not present in the system."

  Hello

  We have a generator function SRS DS345.

  I just downloaded the driver NOR for the instrument on http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9149659CE034080020E748....

  After installation, the DS345 appears in MAX, and I can well communicate with him.

  However, if I run the srds345 to Started.vi, I get an error "location information insufficient (Hex 0xBFFF0011) or the device or resource is not present in the system" from initialize it with Options.vi srds345 sub - vi.

  The only change I did Exchange address GPIB 14 to 19, which is our function generator GPIB address. In addition, the

  Functions of SRS DS345 generator of function palette is empty, even after you restart LabVIEW (see attachment). I'm using LabVIEW 8.5.1.

  Your help in resolving this issue is appreciated. Thank you.

  Best regards

  Peter

  Have you installed the driver from LabVIEW or copied directly from inst.lib?

  The first is easier, and you don't have to restart LV more...

  Error in a not filled gpib address points. I have not checked if this driver has a resource name visa or a string of gpib address old but in the first case, try the little triangle on the right at the slect address instead of by hand.

• This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  Original title: Non-connectable & play drivers

  While looking through my device manager I found 4 of the Non-fiche & play drivers (hidden) with them in exclamation points:

  : Cherimoya

  : innfd_1_10_0_13

  : Iwnfd_1_10_0_13

  : MpKslefd0a58c

  I have no idea what these are, for only they do not work, the about property box: this device is not present, is not working properly or is not all its drivers installed. (Code 24)

  I checked with the driver for each page, and the following line appears for all: "the system has encountered the following error while trying to start the service.

  "The system cannot find the file specified."

  I leave principle that Win 7 needs them to work so any help there would be great, thanks in advance.

  Here's the likely remnants of malware infections that your anti-malware software has partially withdrawn.  See, for example:

  http://www.bleepingcomputer.com/startups/Cherimoya.sys-28755.html

  http://www.herdprotect.com/innfd_1_10_0_13.sys-3e2e078dc9ae42e6223468777ca67d6931a70904.aspx

  I suggest that you uninstall all of these elements, then

  1. Use the Virus Scan free online ESET--> http://www.eset.com/us/online-scanner/
  2. Download, install, update and run the free version of MalwareBytes AntiMalware--> https://www.malwarebytes.org/ you don't need for the Pro version, even if there is a free trial of this one.  During the installation of any software downloaded, be careful when installing and uncheck all the options selected by installing other applications.

• Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you.

  Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you

  I found the problem. I opened 'File' then saw 'save as template' grayed. Having not worked with models, I didn't know this isn't how it's done.

  What I should have done was file > save as > then clicked the drop-down 'Save as template' menu option. It was a simple mistake. Thanks to you all.

• not able to put auto unlock option is not available in system preferences

  Update the end of 2015 to macOs Sierra iMac.

  Updated the Apple Watch at WatchOs3

  Removed the two steps of authentication and improved to two-factor authentication.

  Tried to set up the Auto Unlock in preferences/security system & Privacy panel.

  However, the "Allow your Apple Watch to unlock your Mac" option does not appear in the Panel.

  What other hoops should I go through to get this feature going? Thanks in advance for the help...

  The prices your Apple Watch the Mac on the same network Wi - Fi?  Sometimes the shows may use another network - its s trying to find a network, if the iPhone is not available.

  Is your set watch in place with an access code?

  Once you have changed your two-factor authentication, you disconnect from iCloud and vice versa, on the matched iPhone and Mac?

  See the specs here: automatically unlock your Mac with your Apple Watch

  Use Auto unlock with any Mac and Apple Watch that satisfies the requirements of continuity system:

  • Apple Watch (1st generation), Apple Watch series 1 or series 2 Apple Watch using iOS 10
  • Mid-2013, or more recent Mac using macOS Sierra

  Make sure that your devices are configured as follows:

  • Your Mac has Bluetooth and Wi - Fi enabled.
  • Your identifier Apple is using two-factor authentication.
  • Your Mac and Apple Watch are connected to iCloud with the same Apple ID.
    On your Mac, choose Apple () menu > System Preferences, and then click iCloud.
    On your iPhone, open the Apple Watch app, then go to general > Apple ID.
  • Your Apple Watch uses a password.
    On your iPhone, open the Apple Watch app, then type the access code.
  • Your Mac has "allow your Apple Watch unlock your Mac" selected in Security & Privacy preferences.

• 41.0.1 - tab utilities Plugin Options does not work - ranks multiple tabs, etc.

  41.0.1, tab utilities Plugin Options does not work, multiple rows of tabs, etc.

  Installed and configured 'Tab Mix Plus' to use instead of "Tab Utilities".

  Solved. Thank you.

• app purchase where the physical store is not present

  I am from Bangladesh and that you wish to purchase an app on the app store, but there is no shop in my country. is there an alternative way for app purchases where the physical store is not present

  TIA

  Mubaswir

  No, the only place to get iOS apps is on the app store (via iTunes on a computer or an App Store app on an iOS device) and you must be in a country to use its iTunes/App store (which is part of the terms of the store) - until if/when Apple open an iTunes store in Bangladesh (we are fellow users we do not know what might happen until Apple announce something) Unfortunately you will not be able to download any content from the iTunes store.

• 36.04 FF when I click on tools/options, options do not come up. Options search engine developed instead.

  When I click on Tools/Options in 36.4 FF, it evokes rather than options search engines. How can I bring options to change preferences? I use Windows 7 Home Premium.

  I discovered the real cause of the problem. If the task bar is not hidden at the bottom of the page, then the window options of not fully displayed. Fell off the top with the tabs. I had to hide the taskbar. Thank you.

• Firefox Autocorrect option does not

  Hello

  I recently changed my laptop. I installed firefox, but the auto fix option does not work...
  It doesn't show red underscore on the misspelled words...

  However, sometimes it works as well, but most of the time this isn't...

  Also, I've always seen this similar problem: https://support.mozilla.org/en-US/questions/1026848?esab=a & s = & r = 0 & as = s

  Is this due to a bug in the installation or what?
  I would appreciate your help and your support.
  Concerning

  Hello

  You can check your language settings in your Subject: preferences page to make sure you have the correct language configuration. Go to the tab content for languages. You can also make sure that you enable spell checking in the Advanced section, under the general tab.

  • (language) Tools (or

    

    ) > Options > content

  • (check spelling) Tools (or

    

    ) > Options > advanced > General > "Check my spelling as I type".

  Also, check your dictionaries to ensure that you have the right installed:

  • Tools (or

    

    ) > Add-ons > dictionaries

  You can always see if spelling is enabled for the correct language by right clicking in an input box. "Check spelling" must be checked and that there should be a submenu of 'Language' which shows the dictionary that is currently selected.