Distributed and switch the Channel ports on ESXi 4.1

Similar Questions

• How to extend the network and using the Ethernet port to connect an older computer without wifi capability

  I have a wireless network with my Time Capsule, but also I have an old computer without wifi capability. Is it possible to share the connection to this computer that connects an airport express (model A1264) to extend it and the computer thought that the ethernet port on the Airport express?

  Thank you.

  Yes

• Import data from txt file and name the channels

  Hello

  I want to import data from a file txt (see attachment). Well well, no proplem, but I want to also read the information on the channel names and units and rename the imported channels. Is it possible to do? It is also important that the number of channels may vary.

  Can someone give me some examples of code?

  Thank you very much

  Gabriel

  Hello Andreas,

  Thanks for your work. I'll adjust the code.

  Gabriel

• re4000w and setting the channels with wrt54gl

  Hello

  Could someone help me I have a wrt54gl and want to use re 4000w, is it possible, that I can't see ay area set the channel on re4000w.

  Set to auto dhcp, or this unit only works with wrt54gl in static mode?

  Tony

  RE4000 Getway should be 192.168.2.1

• How to check and change the outgoing port number

  Charter has changed their settings and I need to set the port to 465. How do I do that?

  Tools | Account settings

  Scroll down the list of accounts. The last of them is "outgoing (SMTP) server.

  Select this option, select your Charter SMTP server, click on change.

• The best way to manage and maintain the VM_Template VM using ESXi 3.5

  Hello

  I would like to know, how people do this by creating a guest VM to a VM_Template in ESXi 3.5?

  Previously I was using VMWare Server 2.0 and it worked by just copy paste the directory and then rename the file directory and the most important thing is the customization of the. VMX file

  is there a simple way to do?

  I use right now to copy - paste from my machine to the ESXi Server Veeam FastSCP 3.5u4.

  Thank you

  Kind regards

  AWT

  No, you can not - USB is not supported... Well, it may be, but you must use a USB to the device of the IP.

  http://www.VMware.com/PDF/esx_anywhereusb2.PDF

• Order of port re-auth authentication and switch / stop of the session

  Hi all

  We are implementing an ISE (1,4) and met regarded questions on the agenda of the authentication and a stop of the session after posture in line. We got mab, dot1x as authentication order (priority of authentication is set to dot1x, mab). We have configured a reauthentication in the ports of the switch. Windows uses begging all-connect NAM (see 4.2) to dot1x and posture. During the re-authentication, either all-connecting NAM or switch does not start an eapol start and switch allows the session to the MAB, where - as when seen dot1x and mab authentication switch order generates eapol start. The switches are 3750 (15.0 (2) SE8).

  Any possibility we could force the switch/NAM agent sent an eapol start during re-auth?

  Regarding the posture, posture once conform for an endpoint (after dot1x authentication passes) following a judgment of the ISE manual session for an endpoint, switch creates a new session in ISE changes and switch the State of the unknown port to posture. Posture ise AC client still shows status of complaint of posture in the endpoint. It seems do not know about the stop of the session. During NAM endpoint agent session performs a re-auth component however posture remains unchanged "in line".

  Does anyone have experience this problem?.

  Thanks in advance.

  Concerning

  GA

  Hi Gaj-

  I had the similar problem in the past and for setting the following attribute:

  Termination-action-AVPair attribute modifier = 1

  Give that a go and let us know if you still have any questions.

  Thank you for evaluating useful messages!

• Capsule - save the channel selection

  Hi guys.

  I have Time Capsule 3 to with 7.7.3 firmware.

  If I change 'Radio channel Selection' to 'manual' mode and adjust the channels that I need and press the "Update" button - after devices it still restarts use automatic channel selection. Is a way to fix it?

  Thank you!

  Where do you stand in the world? It is Europe that has this problem.

  And I need to the right of the box model number, as that will include your area code.

  There are tougher laws to prevent people setting illegal channels in your area... so if you put a country with different laws of yours and set a wireless channel that is not legal in your area, the TC will close without applying the changes.

  Apple seems to have anticipated this rule change and still 2 years ago put in work in the 7.7.3 firmware.

  Test it using only 2.4 ghz, then set it to channel 8 as a channel that is legal everywhere... let alone 5 GHz for now... it works?

• Satellite A60-124: using the IrDA port to transfer the data to the mobile phone

  Hi, I want to Exchange data between a phone mobile SonyEricsson and my laptop A60 - 124 via an IrDA port. I activated the infrared sensor in the phone but the laptop does not detect anything.

  The device setting menu shows my port Irda ok and seems to be enabled. What should I do?

  I m not 100% sure but I think on some portable computers, you can enable and disable the IrDA port in the BIOS. Check to be sure.

  In the control panel in the IrDA option, you can choose the place where the incoming files must be saved. So if the IrDA connection has been activated on your mobile phone it should work.
  Remember that the mobile phone IrDA window is in the right position.

• whille prob get bytes to the serial port for serial communication

  Hi all

  I have one using the series write vi to send the command to the instrument. the answer I get is read NICU playback vi. I use between read and write the serial port bytes accumulate bytes. BU what I observed is quite strange. When I run the vi with the debugger, I could c the bytes to port series is 201 and what I get in buffer is only 133.

  any1 can guess at what the problem would be b?...

  You don't show the function of VISA set up a Serial Port, but I guess you have the active stop character. Playback will end automatically when the character is detected and you should never allow when you try to read hex.

• lose the usb port when restarting

  My laptop suddenly lost all the USB ports. I can uninstall the USB hubs and restart and Windows will load the drivers and recognize the USB ports and any connected equipment. Everything will work as usuall until I reboot then have all usb ports stop working. I've updated my Bios and latest drivers available from the manufacturer (Dell), I am running XP home and that you have installed all updates.

  Hi Zmanomore,

  ·         You also update the chipset drivers?

  Method 1: Check if the chipset drivers update is available. If so, the same day and check for the issue.

  Method 2: You can try running the fixit in the following article and see if it helps.

  USB port may stop working after you remove or insert a USB device

• WRT350n - what is the speed of the WAN port?

  Hello

  Virginmedia in the United Kingdom have 50 MB download capability now that I am interested in buying. I was advised to check that my current router (wrt350n V2 firmware v2.00.18) is able to handle this speed on its WAN port before you sign up. It is not clear on the data sheet if the WAN port is gigabut able ehternet, as well as the 4 ethernet ports, and I wanted to ask you just to be absolutely sure.

  Any help or clarification gratefully received.

  Snert

  As the router that you have its a gigabyte wireless router bits, and all the LAN port at the back of the router are the Giga bit Ports LAN. Your router will work with the speed of 50 MB, and you should be able to go online from all your computers.

• All the PC Ports USB does not

  Before going away for the weekend, I turned off my PC and everything seemed fine. But after coming back, all the USB ports fail to read the devices. I ended up having to use chrome remote desktop and some luck to have access without a keyboard, but now I'm at a loss for what to do. I looked and tried several fixes, but none worked. Currently, the two "Standard Enhanced PCI to USB Host Controller" s listed in the so-called Device Manager "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) ». Any ideas would help, but so far, I have tried to uninstall/reinstall them normally and tried to delete upper and lower filters, but none were. And I can't do a restore of the system before it started, as I don't have a fairly recent recovery point.

  AHA! I managed to get into boot options advanced and done what you said (as well as what said a few other people to do using the first command prompt) to turn off the signature device, and now the back ports are working again!

  The front ports but are still stubborn (they don't even give power for what anyone plugged). I'll keep working to fix it, but right now I'm really relieved (I also went ahead and made another restore point in case things went south from there).

• Problem with the start of VMware ESXi 5.0

  I just installed VMware ESXi 5.0 on a new Cisco UCS B200 series blade with two 300 GB hard drives configured in a RAID 1 mirror.  I went through and completed the installation of VMware ESXi 5.0 on this server.  When the installation is complete and the server restarted, he did not initiate the ESXi where I can change the IP address and VLAN.  Instead, I get this text string after the initial boot sequence that is shown in the attachment.  I have a guest who said Shell > do not know why I can not start correctly in ESXi 5.0.  Thank you!  Paul

  Hi Paul,.

  Looks like you boot to the EFI shell. What is the startup policy that you have configured on this server service profile? It should look like the one below.  If there is a problem with the boot order, you should be able to type "EXIT", then enter on the EFI shell to exit the prompt. If your startup is similar to the one below and you still experience this issue, try to downgrade and re - ack the blade.

  Let me know if it helps.

  

• Find processes the source port in XP

  Does anyone know how to find out what process/program is tuned to a certain port on a PC running XP? Or if not, how to connect the use of ports by processes and programs. Here, this is why I need:

  Here we have a rule that all Internet access must go through a HTTP proxy. Our firewall blocks any attempt to directly access the Internet.

  I see the firewall drop some HTTP access. These usually consist of three connection attempts: the first, the first retry after 3 seconds and the second to try again after 6 seconds, then it gives up. This model has become so familiar, I guess this is the standard behavior of Microsoft TCP. These access occur, for example, when a web page contains Java which isn't taking proxy supported.

  Now I have a PC that is much more persistent. Instead of giving up after three attempts, he waits another 12 seconds, takes a new source port and try again. Throughout the day, he repeats this try-3-try-6-try-12-change-try-3-model... Try as I might, I just can't understand what process on the computer generates these connection attempts. The target IP address is variable, but it still belongs to Akamai - which does not really help to identify the offending program. The target port is always 80/tcp.

  My fear is that the PC is trying to participate in a DDoS on Akamai.

  What I want is a tool that will tell me what program generates these packages, preferably within 21 seconds it takes for it to expire and change the source port.

  Can someone help me?

  Kevin Dorrell

  Luxembourg

  You can try one of these URL (there is a link at the end of the first to the second):

  http://www.winnetmag.com/article/articleid/39955/39955.html

  http://www.sysinternals.com/ntw2k/source/TCPView.shtml

  Good luck!