Problem with the start of VMware ESXi 5.0

Similar Questions

• Problems with the new host VMware ESXi 5.0

  We have a dell blade chassis, with 4 710 blades and 8 610 the 710's have 12 network cards and the 610's have only 6 network adapters. I added a new host on one of the 610's and two network adapters in each of the networks belonging to virtual infrastructure. 1 mgmt 2. ISCSI 3. vmnetwork

  My problem is that the new host can see all the resources but I can't move the VM from the hosts to the host 610 710. I get an error because nic 2 on the 710 host is not in the same network as nic 2 on the 610. It seems silly that I wouldn't be able to do that just because the hardware is not identicle.

  I have three vswitches, vswitch0 for management, vswitch1 for the iSCSI network of shared storage, vswitch2 for the network of the vm.

  Thanks for any help.

  Steven Reeves

  Systems engineer

  Shasta College

  [email protected]

  Material is not identical not should not have an impact.

  The vSwitch port group to which are connected the NICs in question is named identically on both hosts?  If they have a different name, vSphere considers different networks.

• problems with the installation of vmware esxi 4.0 on pc

  Hello

  I have a pc I am building.

  the motherboard is ASUS P8P67 Deluxe.

  It includes 2 onboard network adapters:

  1 realtek network card.

  1 network adapter intel.

  When I try to install vmware os it shows me an error that:

  "no network compatible adapter found.please don't see hardware compatibility of the product (HCG) guide for a list of the taken addapters supported...".

  Help, please.

  Thank you.

  Ben.

  The easiest way is to get a compatible network card. The "Intel Pro/1000 GT' for example is known as work and is affordable (about $ 30).

  André

• Satellite U400 - 10L: problem with the start-up & reboot

  Hello

  Well I don't like much about the touchpad overheating but I have a problem. When I restart this mobo instead of activate after a reboot it stays black without any reaction only lower diods, dvd - rom and the display flashes (can't hear fan or hard drive).

  If I press the power button / stop all the icons of diod (ac, pwr, hdd bat) shine up just for a second and new (can't hear the fan hard drive or cpu) computer does not turn on. All this happened only when AC cable is connected to the power if I use just notebook power source battery boots and restart without problems.

  If I remove battery completely from the laptop, once more, I get the same symptoms (cannot start). And the saddest part of this story is the fact that I got brand new Toshiba U400 10 L to the seller and got a new.
  It has the exact same problem.
  As you all probably understand im crazy because in the last two days, I tried really everything, including the BIOS without flashing and the success.

  Well im not sure whats going on, but this could be the problem with the battery or a bad contact?
  Any ideas?
  I would return it back?

  Thanks much for the reply

  Hello

  The behavior of your laptop is really strange and I suppose it might be bound only to a hardware problem.

  A friend of mine couldn't t start the laptop connected to the AC adapter the power adapter is faulty. It was only possible to start Notepad using the battery, and only if the battery was not completely empty.

  I put t know if your AC adapter failures but the authorized service provider should definitely check out the laptop and accessory for laptop (AC adapter).

  Then call the ASP in your country and ask the technicians for later handling.

  Greetings

• I have a problem with the start

  I have problem with start

  Hello! TNX for your reply, after having turned on its says press the ESC key for startup menu. After that: not found boot device
  Please install an operating system on your hard drive. Hard drive (3f0)
  F2. The System Diagnostics

• Problem with the start menu of windows 8.

  So my type of computer is Windows PC. My windows 8 Start menu automatically brings me too my "Apps". Then I have to click an arrow button and it brings me to 'start '. I can't find a way to 'lock or PIN' from the menu 'Start '. So, whenever I push the menu button start it brings back me to the "Apps". Is there a way to solve this problem, so that the start menu button will lead me to 'start '?

  Hi Sarah,.

  Please contact Microsoft Community.

  I understand the inconvenience that this may cause. I'll be happy to help you with that.

  I suggest you to put the computer in a clean boot state and check if it helps.

  Refer to this article how to perform a clean boot in Windows.

  http://support.Microsoft.com/kb/929135

  Note: refer to the section how to reset the computer to start normally after a boot minimum troubleshooting.

  Keep us informed of the status of the issue.

• New here - problem with the network on vSphere, ESXi

  Not sure if this is the right place to post this, please direct me properly if it is not.

  I use an eval of vSphere ESXi on a HP workstation. I built 2 Windows 2 k 8 VM 32 bits on the first data store. They can ping and DNS seems to be resolved, but they cannot access Internet/WWW.

  I accepted the default when installing ESXi and vSphere, so the configuration of the network is all that is by default (using the switch vNetwork, I think?)

  The 2 servers are on a different area of our production area. For this case, we'll call it consigment and Lab.com. "PDC" server is the domain controller, 'Exch8' is the exchange server in the lab. Exch8 has its pointed DNS, PDC and PDC has its DNS indicated on our DNS server in the environment of consigment. They are all on the same subnet 172.1.1.x

  I can ping PDC and Exch8 of my workstation (which is in consigment) by IP, but not name (pdc or pdc.lab.com, or work).

  Can someone at - it facilitate troubleshooting?

  Thank you

  OK finally try this out... It must be something to deal with the configuraiton of windows rather than dealing with VMware.I belive

  1. on the server you can navigate on the internet - see the proxy setting.

  See how proxy setting - open internet explore - switch to the option internet tool - connection tab click lan setting and get the configuraiton of proxy and put it in the PDC. Lab.com server and see if it works...

  2. also if you have installed antivirus tools on the server that you are not able to browse internet but able to ping... Uninstall AV and try...

• Problems with the start of the vi using TCP on a cRIO, error code 63

  I'm trying to deploy the 'multiple connections - Server.vi' in examples of TCP & UDP to a cRIO as the startup application. The vi works fine and I can connect with many clients until I have deploy the vi and set it as vi on a cRIO device startup. When the device restarts and I try to connect with the 'multiple Client connections 1(vi)"also found in examples of TCP & UDP, I get"error 63 occurred to TCP connection open. Are there additional parameters that need to be enable to allow TCP as the boot vi?

  I don't know that is the question and I don't have an RT target available to test it, but here's a possibility: property nodes sometimes do not work as expected when you run on a RT system without front panel.  In the case of multiple connections - server example, the first thing that happens is that the VI wrote a false value in the property node.  As explained in the link, this has no effect.  For example, if the default value of the control 'Look stopped' is 'True' the top loop will close after the first run, which will stop the VI, probably leading to the error that you see when you try to connect.

  To resolve this problem, I recommend you remove the 'Missed listening' control completely and change conditions to stop for the two while loops.  You run a compiled application on RT, so unless you will connect using a remote panel, there is no need any façade including the stop button control.

  EDIT: if I have correctly identified your problem, you can vote for this idea: "Warn on the face property node to use when you build a RT".

• Problem with the video for "VMware vSphere Hypervisor - install and configure.

  Hello

  In this page: https://my.vmware.com/group/vmware/evalcenter?lp=default & p = free-esxi5

  When you click on the "Installation and configuration" tab, we have access to videos for vSphere Hypervisor.

  But at the moment, none of the video can be shown.  I tried this in my computer at home as well as my company computer and none works.

  Someone who works for VMware please check this problem.

  Thank you

  OK, I just found what was "wrong".  These videos are "optimized" for Internet Explorer!   Yes, I tried on Firefox and Chrome on XP Pro and Win7, nothing worked.  Then after reading your message, I thought ' what happens if I try that? "  ... and indeed, the videos are displayed inside, I.e. I got suddenly a bad feeling, like I was back at the beginning of the 21st century!

  Come on!  Who would still do 'optimized' only website to know today?   I'm sure they will not be displayed on my Tablet either.

  I found these videos on YouTube:

  http://www.YouTube.com/watch?v=Xss_2Qx51fU

  http://www.YouTube.com/watch?v=adrO7SXyjBE

  http://www.YouTube.com/watch?v=8lkMIqgfOj0

  http://www.YouTube.com/watch?v=ZHUjDWpHJvU

  http://www.YouTube.com/watch?v=_MofPJsG9gQ

  I think they are the same videos (but the quality is really bad... 360 p.: geez!).  Could someone confirm that they are indeed the same as those in vmware.com?  THX

  PS: Oh, on the section "Help", I found it at help | United States but I've seen no paragraph telling me how to report a problem on the website.

• Problems with the 'start' button and the size of the video in the program monitor

  I was on TSF phone Adobe Help for about 3 1/2 hours today.  The problem is that the video in the program monitor doesn't fit - even when I checked it to 'fit '.  I have a mac - totally up top date, and film imported from my canon 7 d, I turned to 1280 x 720.  When I created a new project with the same, the image in the program monitor is too big.  When I create a new project in 1280 X 1080 image is too small - even when I click on 'adjust '.  Also, sometimes the play button doesn't work everything simply.  Help, they managed to get rid of my twice - preferences to no help at all, "clean up" my hard drive and the problems still continue.  They then tell me in order for me to go to the second layer, I want to buy a contract.  Can someone help me! Lose my mind! Thank you.

  What's happened is that you have created a sequence with the wrong settings.  Right-click has created a sequence with the correct settings.

  Adobe-forums http://blogs.adobe.com/kevinmonahan/2013/09/11/Marking-Posts-As-correct-or-helpful-on-the-/

• Qosmio G30-126 - problem with the start screen

  My laptop was working perfectly until I suddenly found starting with sound activation boot but without any image appearing on the screen until I got the windows login page in which the image appeared with its normal perfect resolution.

  The operating system is Windows 7, which worked smoothly, with all the drivers toshiba, installed more than 3 months, and the device was normally closed the time before the problem occurred.

  I tried to use the restore disc but the problem is that I can't see something! the computer works, but the screen is black as if the laptop is turned off completely.

  I tried to connect an external one LG LCD but it gave no results, but only a screen empty.

  I really need help in this issue that this notebook contains all of my work and I very much count on it.

  Hello

  Can enter you the BIos (F2 on startup)?

  > I tried to connect an external one LG LCD but it gave no results, but only a white screen

  However, I think it is the dysfunction of the graphics card as your laptop work without any image that appears. In this case, you must contact the ASP (SAV) in your country:

  http://EU.computers.Toshiba-Europe.com/innovation/generic/ASP_SUPPORT/

• Satellite L300-1CU / problem with the start-up of the machine

  Hi people,

  Today, when I turned on my computer, I met a message:

  * "Could not start Windows. A recent hardware or software change might be the cause.*

  * Launch Startup Repair *.
  Start Windows normally "

  Now, when I choose launch start up repair, he said:

  * "Windows has encountered a problem communicating with a device connected to your computer, this error can be caused by unplugging a removable device software such as a USB drive external unit is used, or by a defective hardware such as a hard drive or CD-ROM drive that is failing.*

  * Status: 0xc00000e9 *.

  * Info: An unexpected i/o error has occurred. » *

  Now, in case anyone is wondering how I can make this post while the laptop is not able to start up, I use my old system.

  I hope someone can shed some light on this problem for fix me everything simply.

  Thanks in advance.

  Hello

  I can't say for sure what the problem is here, but I guess that somehow HDD is stopped working and it is not available for the system somehow.
  Try please enter the BIOS settings and set the default value. After this try to restart the laptop.

  Please post the result.

• Problem with the start up programs

  My programs will not start correctly. Whenever I click on a shortcut, it displays a pop-up window saying 'open with '. This happens with all programs, to include internet Explorer. How can I fix it?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try running this fixit and see if it helps:
  http://support.Microsoft.com/kb/950505

  Method 2:
  I suggest you try to run the System File Checker. System File Checker tool will solve the problems of missing or corrupted system files on Windows. It determines which file is causing the problem, then replace the file.
  http://support.Microsoft.com/kb/929833

  Also check out this link:
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  It will be useful.

• Problems with the start time/Display Tune (r) / Vista Business

  Dear community of Mic,
  I have two problems that slow down my computer.

  (1) start time:
  After my computer starts, it loads quickly in the logon section. However, after I give my login information
  the HP computer HP monitor goes black for about two minutes, then the desktop.

  (2) display tune (r): after the desktop appears, I get an error box saying that "Display Tune (r) failed to load.

  I removed Display Tune (r) in the list of programs using the uninmstall tool in Control Panel.
  I even deleted display Tuner (r) additional files I found during a search.

  However, the error of Display Tune (r) appears after every start.  Even tried to reload the program, but to no avail.

  Any help would be appreciated gratefully.

  Thanks in advance.

  B.B.

  [Moved from comments]

  Hello

  Thanks for posting the request in the Microsoft community forum!
  It seems that the laptop computer goes to black screen after login section and the 'Display Tune (r) failed to load. To get these fixed issue, try the suggestions.

  You did changes to the computer before the show?

  Follow the suggestions listed among the links:

  Method 1:
  If you have any external device connected to the computer, you can try to unplug the external devices except the keyboard and mouse and check if the problem occurs.

  Method 2:
  Step 1: Try to start in safe mode and check is that the computer goes to black screen.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 3 above to the Knowledge Base article.

  Method 3:
  If the problem persists, you can update all divers latest including the BIOS on the manufacturer's Web site and check if it helps.

  
   

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Note:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Please post if the problem persists, we will be happy to help.

• Problems with the start-up of Win7 64 bit on Win Vista 32 bit

  I downloaded Windows 7 Ultimate 64-bit edition of msdn.com and he came. EXE format. I used Daemon Tools to open the file, because when I tried to open the. EXE, it says that I have not so much permision I opend the virtual dvd drive created by Daemon Tools, copied the files from there to the DVD - R disc costs and followed the steps microsoft provided on the how-to page. After that I restarted my computer with Win7 disc it gives me a black screen with flashing line in the upper left and then he start Win Vista normally.

  Hi Mkklincr8.

  You have the Windows 7 Pro who withdraws the offer of Win741? If so you can ask them for the iso instead of the exe version. Then, because you're going to Ultimate Pro, you will need to do a clean install.

  Matthieu Arkin - Microsoft Partner - http://twitter.com/Microsoft_Cares - all messages are "like what" without warranty of any kind, explicit or implicit