divide with rules

Similar Questions

• Open the InDesign page with rules showing as a school notebook paper

  When I open a document in Indesign, it comes up with rules on that as a school notebook paper.  How can I get rid of these lines and how can I configure Indesign to open a new document with a blank page?

  Thank you

  -Kenoli

  Baseline grid. No need to panic, it is a display only setting.

  As with almost * all * InDesign settings, all you have to do is close all documents, then select view settings you want in the usual menus. Who will become the defaults for new documents.

  If you see it in an existing document, and that bothers you, simply it turn off and save your document.

• Error DBWalker with rule ERROR greeting

  DBWalker gives me an error with the greeting on the run rule error call goes to the incorrect object id. But on the greeting call handler, the rule of the error is not visible in SA. How I have difficulty to this rule and clear the error without clear and rebuild the call handler?

  Also, how do call handlers lose their owners? I got the Manager to call for a main number lose its owner over the weekend and calls were getting failsafe message this morning until that this problem has been fixed.

  Unity 4.03 SR1

  You can activate the greetings of error being visible in the surveillance society using the configuration tool advanced in the warehouse of tools on your desktop. The parameter desired is "Administration - expose the greeting of error for subscribers on the SA.

  Usually a handler will be 'lost' its owner when this user or this dL is removed from the system. Unity 4.0 (4) does not send callers to failsafe if the owner is absent, by the way – it will always be so if the recipient is not found, because we do not want to get into a situation where we take a message, we can not deliver.

  Also, 4.0 (4) has links to deletion in there - which means that you can configure a user/DL to act as replacement when you delete a user/DL of the system which was referenced as owner or beneficiary for a Manager - it makes it a little harder to get into this kind of situation.

• Emails of New Smartphones blackBerry with rules ordering specific folders does not download

  I just got my BB through the company and we have problems of implementation of e-mail. The company has a BES server and uses the Outlook of business e-mail. The problems are with the download of e-mail that has been redirected by a rule in Outlook to a folder inside the Inbox.

  So far, I loaded the Blackberry Desktop and configured the setting of e-mail on the Advanced tab to redirect the files sampled and selected all records. I double checked the settings in the tab options and are stored on the device. I still do not receive e-mail if the address has a rule to one folder other than the Inbox.

  I am sure there is a setting somewhere, but have not found.

  Help!

  Thanks in advance,

  By default, a BlackBerry will reconcile only (DON'T Synchronize) with the Inbox.  You must enable the Folder Redirection for each folder that you want to be able to see email coming in on your BlackBerry.

  1. From the home screen, go to Messages, then click on the [Menu] (button to the left of the trackball) button or scroll wheel , and then select Options--> e-mail settings.
  2. On the e-mail settings screen, click on the scroll wheel or [Menu] button and select The Folder Redirection.
  3. Top of the screen, you will see your mailbox with a + to the left of it.  With your mailbox highlighted, click on the wheel or the [Menu] button and select expand.
  4. You should now see all e-mail folders in your mailbox, including your Inbox.  Note that the checkbox to the left of the Inbox is verified or filled (depending on your operating system and the theme).  This indicates that the BES server redirects email arriving in this folder to your BlackBerry.
  5. Subfolders located under a folder that you see are indicated by a + to the left of the folder.  Select the line and Expand (see above) to display subfolders.
  6. Any redirected folder will be a box filled or enabled to the left of it.  To activate the redirection of a folder which is not filled or saved, highlight the line of the file and press [space]
  7. When you are finished, [Esc] (button to the right of the trackball) or the button below the scroll wheel and select Save.

  Further, mail arriving in checked or completed records now appears in the list of Messages.  You will notice that the icon of these emails is a folder instead of an envelope.

  As suggested above, you will not see ANY e-mail that has already been received in your mailbox on your BlackBerry.  This is because the BlackBerry is not sync, but rather sends an e-mail once and then follows the changes in the status of messages.  To get any email on your BlackBerry, simply send to yourself of your e-mail application.

• Authentication problem with rules restrict and fw vShield

  I have a strange problem with my Loadbalancer FW rules.

  My client in the face of orifice is VMNIC-1

  My cell face port server is VMNIC-2

  I have configured the FW rules to allow HTTPS of VMNIC-1 VMNIC-2 traffic

  This allows me to see the page of the portal without problem.

  When I type my user name and password, I get an authentication error and it will fail to authenticate.

  If I change the FW rule allowing HTTPS from VMNIC-1 to all it works!

  I thought that the road of authentication must be face VC of the cell server port and handled in the backend?

  I don't know why authentication requires that the client HTTPS to access somewhere other than just the Portal Server cell network card?

  I'm slowly open ports on different servers etc to see what is the cause, but I thought I'd post here in case someone can give a better description on the authentication model.

  OK, this is the solution for your firewall rules on a loadbalancer for servers in the cell.

  Do not use the auto rules

  Configure HTTPS for outside access to vse (it's the services vshield iin this case loadbalancing)

  Configure HTTPS access to the vse to the IP addresses of your cell servers explicit.

  I think that now, it means that your request arrives in the vse (Vshield Edge), which then makes the front appearance of transfer to the IP addresses that you specified for the cell of load-balancing servers.

  There are no. Any Any configurations and the default rule is set to deny.

  Hope this helps someone out there.

  Norton

• List of messages with rules

  Hello

  I'm looking for a list that contains all the rules and messages in one place, with details and examples if possible. Now I can see them here:

  http://opensource.Adobe.com/svn/opensource/flexpmd/trunk/Flex-PMD-RuleSet/src/main/RESOURC 're/com/adobe/ac/pmd/rulesets.

  In fact, I'm looking for a document "Flex best practices".

  Thank you

  Adobe has a Flex Coding Conventions here:

  http://opensource.Adobe.com/wiki/display/FlexSDK/coding+conventions

  The creator of Ruleset of PMD Flex has, in my view, all the default rules - some examples:

  http://opensource.Adobe.com/svn/opensource/flexpmd/bin/Flex-PMD-RuleSet-creator.html

• Not able to deploy a BPEL process with rules

  Hi all
  
  I created a very simple BPEL process and defined a business composite rule, I call my BPEL processes.
  However, I am not able to deploy the project completely successfully.
  
  I use JDEV 11 g to build/deploy my projects on a SOA_Suite_11g. Notice that I can deploy a project with success if she has no business rule.
  
  That's what I see in the tab "Journal of deployment:
  
  [13: 49:17] deployment of profile...
  [13: 49:17] wrote the SAR file to /Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar
  [13: 49:17] deployment of sca_FLThree_rev1.0.jar to soa_server1 [redunca.pvo.groundhog.com.au:8001]
  [13: 49:17] sar=/Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar treatment
  [13: 49:17] adding file sar - /Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar
  [13: 49:17] preparing to send the HTTP request for the deployment
  [13: 49:17] Creation of HTTP connect to host:redunca.pvo.groundhog.com.au, port: 8001
  [13: 49:17] sending internal deployment descriptor
  [13: 49:17] send (archive) - sca_FLThree_rev1.0.jar
  [13: 49:19] Server, the response code = 500 HTTP response was received
  [13: 49:19] error in deployment of archives sca_FLThree_rev1.0.jar to soa_server1 [redunca.pvo.groundhog.com.au:8001]
  [13: 49:19] HTTP error Code returned [500]
  [13: 49:19] Error Message from the server:
  The composite deployment error: oracle.fabric.common.FabricDeploymentException: oracle.fabric.common.FabricException: error occurred during deployment of the component: FLI to service engine: implementation.bpel, for composites: FLThree: ORABPEL-01010
  
  Build process failed.
  failed to generate the BPEL process file '
  Could not create file named BPEL process. The reported exception was '/apps/oracle/ofm_11g/user_projects/domains/soa_dev_domain/deployed-composites/FLThree_rev1.0/sca_FLThree_rev1.0/198abebc-19d9-4df6-a712-2122b0b9730a/SCA-INF/FLI.lock (too many open files).
  Make sure that the file "" is a valid file to be generated.
  : Error occurred during deployment of the component: FLI to service engine: implementation.bpel, for composites: FLThree: ORABPEL-01010
  
  Build process failed.
  failed to generate the BPEL process file '
  Could not create file named BPEL process. The reported exception was '/apps/oracle/ofm_11g/user_projects/domains/soa_dev_domain/deployed-composites/FLThree_rev1.0/sca_FLThree_rev1.0/198abebc-19d9-4df6-a712-2122b0b9730a/SCA-INF/FLI.lock (too many open files).
  Make sure that the file "" is a valid file to be generated.
  .
  [13: 49:19] check the log of the server for more details.
  [13: 49:19] # incomplete deployment. ####
  [13: 49:19] error deployment archive file:/Users/satinder/jdeveloper/mywork/ChapterTwo/FLThree/deploy/sca_FLThree_rev1.0.jar
  (oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
  
  
  Any ideas...
  Thank you

  Only, we have solved the problem!

  In the script start for WLS, the open files limit that was set in the operating system for the oracle user has been replaced with a value of 1024!
  Commenting on this line in the script (so that the operating system settings should work), resultet a mistake at the start of the WLS.

  Now, we put the 'ulimit' to '65536' in the script '... / wlserver_10.3/common/bin/commEnv.sh ' (search for "ulimit") and everything works fine!

• How to multiply and divide with the simple calculator from win 7?

  I can do the addition and subtraction, but don't see any symbol of multiplacation or division...

  The key multiply is marked with an asterisk * and is to the right of the number 6.

  The key of the fracture is marked wiith a slash right, / and is located next to the number 9.

  Tom Ferguson

• Can someone help me and explain how to assign hotspot/image map with rules of css or any other way?

  I have problem with hotspot because its position cannot be fixed to follow the proportion of the fixed background in different resoulutions.

  You cannot assign hotspots with css. Here are some options different however, you have...

  You can try to use several images that can evolve, linking each image, instead of hot spots.

  You can also look into "sensitive image maps" to get examples of jquery/javascript run interactive images that can be resized.

  According to your image (for example, if you are linking States on a map) you would be able to use the SVG paths and link paths with javascript.

• link to a workflow of accounting with rules of autoaccounting?

  Hello
  
  Is there a way link workflows generator accounting requisition, purchase order, invoices, etc. for a rule set in projects autoaccounting autoaccounting?
  
  Concerning

  Hello

  There is no direct link between the two tools.
  However, if you use a list of choice located in AA you can see the same search defined by the account Generaor.

  Dina

• Add alias with rules file

  I have existing members and I would like to add an alias to the members. Two columns in the data file, the Customer_ID and the client_name.
  
  Customer_id already exists in Essbase, I want to add as an alias client_name.
  
  I built a rules file to use this data but get an error on the saying of validation:
  
  Field 2 - this member is marked as an alias, but there is no associate member field that precedes.
  
  I have referred to field 1 as Member ID.
  
  What I am doing wrong?

  This could mean that you do not associate the same size as the alias

  for example
  Gen2, customer | Alias2, product

  or incorrect associated generations/levels

  for example
  Gen2, product | Alias3, product

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Try to insert the citation with rules in windows 7

  I don't know whether or not it is a clitch. When you try to insert a paragraph like quotation and setting nets after space then when I hit return to go to the next line but instead he breaks the column in a large space empty. How can I work around this problem? I tried this on a mac and it works fine.

  Thank you!

  Normally enter on the numeric keypad is mapped to the column break (not frame break, but if it's a single column setting the effect is the same), but on a number of PDs, for most laptops, the two enter keys are mapped together. If this is the case, change the State of the NumLock usually change both of them between coumn break and paragraph break.

  If this describes your situation, you can change your keyboard shortcuts and assign the paragraph to the two keys break, then make a new shortcut for the column break, if you need.

• RV220W - rules of access/redirection of port with multiple WAN IP addresses

  I just installed a Cisco RV220W - that works very well for outbound traffic, however for incoming it seems unable to work with multiple WAN IP addresses.

  We have a block of 6 WAN IPs assigned to us by our ISP, and I want to use each of them to expose certain ports on our servers to the outside world.

  I tried to do with rules (by using HTTP, for example) with the following parameters:

  Connection type: Inbound (WAN (Internet) > LAN (local area network))

  Action: Always leave

  Service: HTTP

  Source IP: Unique address

  Start:

  Send to the Server Local (DNAT IP):

  Use other WAN (Internet) IP address: disabled

  Status: Activated

  However, the port of the inaccessible Server/rest.

  I tried:

  • Restart the server with power power off again
  • implement the same port forwarding settings
  • triple-checking all the IP addresses used

  The only way that I have working is by changing the access rule so that it applies to any specific source rather than to another address... but this isn't a solution for us because we need to use specific IP addresses to the internal servers/ports specific.

  The interface of the router admin certainly suggests that this should be possible, but using it seems to break all incoming access!

  Any suggestion is welcome.

  You must use "ANY" as the source IP address, you publish your internal server to the internet and the internet means that the request comes from any source IP address (you don't know what it is, so that's all.

  Basically, you want any source IP to hit one of your WAN IP on port 80, and then your firewall will redirect the request to the internal private IP address of the server on the same port 80. And when the answer comes back internal server, the firewall will already have this translate entry in and reverse NAT won't happen (you must configure it, the default firewall function).

  I hope that I have answered your question.

  Please mark as correct, if you like the answer.

  Thank you

• Priority of the rules with dynamic content

  Does anyone know how the rules have priority in dynamic content?

  For example, I have three rules: content, content for designers and content developers default. If a person is designer and developer, I want to send them the content developer.

  Any ideas?

  -If anyone knows how to add names to the rules too, would be great. They are currently all record as "rule 1" "rule 2"... ".

  Thank you!

  The engine follows a short-circuit evaluation. It begins with rule 1, then goes to rule 2, etc.. The first rule is a football match is used. If no rule is met, then the default value is provided.

  I agree, it would be nice if the rules have been appointed. Please create it if it is not already there in the exchange of ideas!

  Aaron.

• Fragments of rule in the rules of shortcut

  I had a table of shortcut rules that did not work, something in the sense of:
  
  Shortcut rule
  
  the result of the transaction
  
  'Result' - AttributeX = 5
  ' Result B '-AttributeX = 6
  ' Result C '-AttributeY is set to true
  ' Result D '-AttributeZ is set to true
  
  I found the reason why it cannot work because I've had conditions on several attributes within a single table. Thinking that the fragments of the rule may be the answer, I divided the rule 3 fragments (each rule shortened, but still the tables I seem not to be able to set the value of a text attribute otherwise).
  
  rule_property [fragment: 1]
  Shortcut rule
  
  the result of the transaction
  
  'Result' - AttributeX = 5
  ' Result B '-AttributeX = 6
  
  rule_property [fragment: 2]
  Shortcut rule
  
  the result of the transaction
  
  ' Result C '-AttributeY is set to true
  
  rule_property [fragment: 3]
  Shortcut rule
  
  the result of the transaction
  
  ' Result D '-AttributeZ is set to true
  
  
  However, regardless of the values of attributes X, Y and Z, the rule always seems to set the result value, any ideas? Is it permissible to use fragments of rule in the rules of shortcut?

  Then use your phone to call example, what about a regular rule like that?

  + (conclusion) + the call has ended if
  + (Level 1) + the customer has not responded to the phone or
  + (Level 1) + the customer hung up or
  + (Level 1) + a sale was filed with the customer or
  + (Level 1) + customer details were collected

  The conclusion ("the call is ended") will remain unknown until one of the following attributes is set to true:

  the customer has not responded to the phone
  the customer hung up
  a sale has been filed with the customer
  customer details were collected

  And it could be the case that some of these attributes depend on other things, for example

  + (conclusion) + customer details have been collected if
  + (Level 1) + the customer name is known and
  + (Level 1) + name of the client is known and
  +(Level 1) + address e-mail client is known

  ... where the 'customer name', 'customer name' and 'customer e-mail address' are all text attributes declared in modules.

  Have you trained as an OPA? I suggest strongly that do you. Your first post, looks like you're thinking about OPA from the perspective of traditional programming. Modeling of the OPA rule is different. I think you would benefit greatly from taking a rule OPA training course.