dll error and fixing kernel 32. ntdll.dll

Similar Questions

• on reinstallation of XP W I get 0x8024400A error and fixit cannot work because I'm unable to update to sp3

  I had wit problem W XP and reinstalled. Now, I'm trying to update XP W using W update and it gives me a 0x8024400A error. A FIXIT solution does not work as he wants me to SP 3 level while I am not able to update all the

  Thanks for the solution

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

   

   

   

  Edit:

  http://support.Microsoft.com/kb/2497281

  You may be unable to access the Windows Update site...

• error when calling NtSetTimerResolution in NTDLL 1097. DLL

  I get 1097 error when calling NtSetTimerResolution in NTDLL. DLL. why?   I scoured most of the posts on this forum describing the 1097 error and tried the solutions without success.

  This is a link to the function prototype (copied below) that I adapted in the node call the attached vi library (you will be asked to locate NTDLL. DLL on your system when opening it)

  NtSetTimerResolution and NtQueryTimerResolution are defined as follows. All hours are stated in hundreds of nanoseconds.

  NTSTATUS NtSetTimerResolution (
  IN ULONG RequestedResolution,
  IN BOOLEAN defined.
  ON PULONG ActualResolution
  );

  Parameters

  RequestedResolution

  The desired timer resolution. Must be the legal scope of the system timer values supported by NT. The standard x 86 systems it's 1 to 10 milliseconds. The values that are within the acceptable limits are rounded to the next higher standard x 86 HAL millisecond limit. This parameter is ignored if the Set parameter is set to FALSE.

  Set

  This is TRUE if we ask a new resolution of the clock, and FALSE if the application is indicating that he hasn't needed a resolution already implemented.

  ActualResolution

  The resolution of timer in effect once the call is returned in this parameter.

  Woohoo! I solved the problem.

  I was using a copy of NTDLL. DLL C:\Drivers\I386\SYSTEM32\NTDLL here. DLL (version 5.1.2600.1106)

  instead of C:\WINDOWS\system32\ntdll.dll here (version 5.1.2600.5755).

  An observation aside Interestingly enough, I did, when I tried to put the old version in C:\WINDOWS\system32 to see if it was just a problem of dependence, rather than a version number, I couldn't do it!  I tried renaming C:\WINDOWS\system32\ntdll.dll C:\WINDOWS\system32\ntdll.dll.old and immediately a replacement c:\windows\system32\ntdll.dll pop up would be in his place! I even tried to drag / drop of C:\Drivers\I386\SYSTEM32\NTDLL. DLL C:\WINDOWS\system32\ntdll.dll, it seemed to replace, but a system of security immediately replaced it with the latest version.   WinXP is smarter than I thought, or maybe something like Microsoft Windows Defender Antispyware installed by our company does this.

  In any case, I've confirmed lateer version is necessary because when I copied C:\WINDOWS\system32\ntdll.dll to C:\Drivers\I386\SYSTEM32\NTDLL. DLL, it also solves the problem.

  You might well ask why I did not use the correct version in the first place - well not knowing where he was, I only noticed the old version when I searched for it with my Google Desktop.

  Rgds

• Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Runs the command "regsvr32 quartz.dll" shows 0 x 80040154 error and the laptop webcam does not work

  Hello

  Thank you for your response.

  I appreciate that you have attached a screenshot of the problem.

  Have you tried troubleshooting of hardware and devices running?

  Please refer to the suggestions of Naman R responded on 1 April 2011 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/DllRegisterServer-failed-with-error-code-0x8002801/403ee0d0-895B-E011-8dfc-68b599b31bf5

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this helps.

  Thank you

• Error: 0xc000012f and the KERNEL DATA PAGE FAULT

  My son has a laptop of game.  Since last week, he experienced extreme problems.  A constant if the following errors: 0xc000012f and the KERNEL DATA PAGE FAULT.  Although I'm not technologically savvy, I tried the obvious in running virus scan and visiting different communities for troubleshooting tips.  When you run the antivirus (paid service) analysis, the system hangs and the system restarts.  I attended ASUS website in the hope of getting more advice than to have to provide access to the laptop of my son to a technician who gave me some insurance for the better part of 45 minutes that he help and troubleshooting problems.  He highlighted a very detailed chart of downtown action (reliable?), which looked pretty serious.  Suffice it to say, the conversation ended when he asked a one-time fixed fee of $200.  When I refused, he went to stop everything.  I would simply like to take any action that will further damage the laptop of my son. I paid $3K for this system.  Is someone can you please help me solve these problems?  I was going to buy a registry cleaner but was informed in an online community chat room not to do so that these products are not reliable.  Thank you all in advance for your review and taking the time to help me.

  Original title: need assistance immediately please.

   We need the log files themselves (called a DMP files) because they contain the only record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  
  

  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found here

  If you have any questions regarding the procedure, please ask

  
  

  I find the files DMP prayed and tried their zip.  I received the following: file not found or no read permission.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the 'hard drive' was "fried".  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB), this is the info on the box, to replace my 750Go son.  He said that, even if was less "room" it would "fly".  The original price was $ 200 and climbing!  Give me the question my faith in humanity at this time.  Is not relevant to the prey on someones lack of knowledge.  You and the other hand, all those who try to make a difference... who are trying to help is welcomed.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

  I took it to a repair shop for yesterday I had to argue that these issues were well beyond my skill level.  The owner of the store insisted that the "hard drive"was"French fries".»  It was agreed to replace the necessary parts (gave me a "Crucial - M4 Solid State Drive - 128 GB - INFORMATION ON LISTED), to replace my 750Go son.  He said that even if it was less "room" it would "fly".  The original quoite was $ 200 and climbing! Give me the question my faith in humanity at this time.  Seems very inappropriate to prey on someones lcak of knowledge.  You on the other hand and those who try to make a difference... who are trying to help, should be commended.  I wish offered troubleshooting would come to maturity.  Nonetheless, I humbly thank you for your support and follow-up in this case.

• Microsoft has a software that cleans, repairs and fix registry errors for free?

  Clean and fix free registry errors

  Microsoft has a software that cleans, repairs and fix registry errors for free

  On Tuesday, January 18, 2011 20:38:14 + 0000, Tinaya says:

  Microsoft has a software that cleans, repairs and fix registry errors for free

  N ° and stay away from all these programs.

  Registry cleaning programs are all snake oil. Cleaning of the
  registration is not necessary and is dangerous. Let alone register and
  do not use any registry cleaner. Despite what many people think, and
  What software record cleaning suppliers are trying to convince you,
  have unused registry entries is not really make you hurt.
  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.
  Read http://www.edbott.com/weblog/archives/000643.html

  and http://aumha.net/viewtopic.php?t=28099

  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

  Ken Blake (MS-MVP)

• Error on kernel stack inpage error and blue screen

  (Note: this post was created on behalf of another user.)

  Recently, my PC had blue screen errors.  Thinking it was probably a problem of aging HD, the HD has been replaced and a new install of Win XP Home Edition with Service Pack 2.  Blue screens persist despite the new drive.

  The error is a "Kernel Stack Inpage Error".

  It is a new drive with the same errors as before so I think that it is not a virus and probably a problem with another piece of hardware.  There is a minidump file available if need be.

  Can someone please help with these errors?

  Thank you.

  If you would like to get BSV and run it, then choose:

  Options, lower pane Mode, all the drivers

  You'll be on your way and see the battery and your ATI drivers.

  Updates Microsoft released the second Tuesday of each month (Patch Tuesday) so it would be on 07/12, but since you have SP2, I can't say what would happen or what updates you decided to install.  If you have accepted the recommendations of MS for video drivers (which are usually poorly), who knows what is happening.

• How to fix plug-in on yahoo messenger it always says error and I try setting but I can't seem to fix the plug-in at all.

  How to fix the plug-in on yahoo messenger if i can hear music on it someone can please help me all I get is error and I try to fix it, but I can't seem to solve this

  Hello

  1. when the question is is produced?
  2. don't you make changes to your machine before the problem?

  I suggest that you contact the support of Yahoo messenger for better help.

• I need a free scan and fix to find errors on my computer

  I had several analyses on my computer and the sky is indeed declining according to third parties. Is there a free scan and fix for errors and other problems highlighted by the companies that want the difficulty for a charge I have windows vista Home premium, is there a free way to clean my computer? Thank you, dale e-mail * address email is removed from the privacy *.

  You would be wasting your time and money. What exactly are you trying to accomplish?

  If you really want, you can use the relatively harmless CCleaner:

  http://www.filehippo.com/download_ccleaner/

  My advice is removes nothing that you don't know what it is. It will save you long-term evil.

• Microsoft has sent a page with errors and I did not finish before disappearing from fixs how do I get it back he has appeared on the toolbar on the bottom right

  It showed I had, reported 183 errors and show details on how to fix never seen before, but thought it was useful but can not find it it's on the web sent to me by microsoft

  Hello

  You are running Windows Vista?

  Try referring to this link and see:
  http://TechNet.Microsoft.com/en-us/library/cc709644 (WS.10) .aspx

  He hopes heps.

• How do I detect and fix registry errors?

  How can I find out, detect errors and repair the registry?

  Hello

  You can solve the problems caused by an error by using different methods. Most of the errors are not just the registry
  errors. Do not buy into the use of cleaners registry or system optimizers who are too hype and wil difficulty little
  causing a lot of problems. Look at programs such as snake oil.

  If you have a system error come here and in detail the issue and we can usually help you solve. Specific
  Errors may require a particular corrective measure. Here are a lot of General methods to help you determine
  or correct problems. In the next message will be a complete enough for general performance troubelshooter
  help if needed (of course, it includes many below).

  ------------------------------------------------------------------------------------

  Some general methods to correct a lot of problems in the system include:

  System restore - use so you can go back to before a problem occurred - with the exception of malicious software which most often
  It must be removed before using the system restore, which could help to spread the infection.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------

  To correct the many problems caused by the start-up of programmes, services and drivers.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or
  Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx-

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  --------------

  A repair Installation allows to keep the programs and data, even if redundant backups are
  always a good idea.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------

  Other useful methods include the Startup Repair (the best of the repair disk or a Windows Setup.

  Startup Repair often works from a Windows 7 repair disc or a disc of Windows 7 Installation
  When he does not value or a recovery disc. If so how do a Windows 7
  ERD is lower. An ERD can be done on any computer with a CD burner running
  XP, Vista or Windows 7 because it uses no files from the host computer.

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.
  Often an ERD will help you when the recovery disk is not - use OPTION 2 to
  make the disc.
  
  How to create a Windows 7 system repair disc - use OPTION 2 to
  make the disc.
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.

  This is the message I got when my backup stopped and said cannot complete backup. Need answers?
  Cannot view XML input using XSL style sheet. Fix the error and then click the Refresh button, or try again later.

  --------------------------------------------------------------------------------

  A name was started with an invalid character. Error during processing of the resources ' file:///E:/WindowsImageBackup/ray-PC/Backup 2011-0...

  Hi lrl1of5,

  (1) do you use Windows Backup and Restore?

  (2) if it works well before?

  (3) remember to make changes?

  It is sufficient to indicate the complete error message you receive.

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2:  Clean boot the computer, then try to backup again

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

• I received error of the kernel and the PC freeze

  I went on my laptop this morning and while on my blue screenwent of the screen House and gave me an error message saying that they have restarted my computer due to an error in the kernel or something. I've stopped manually my laptop and when she came back on, I would try to go on Internet or lookat my files and my entire computer is now locked. Nothing works! Help, please!

  [Original title: need urgent help (Kernel error)]

  Try to reboot your PC or make a stop to material (by pressing the power button for a few seconds) and then turn on your PC. Take a look at:

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-safe-mode

  http://Windows.Microsoft.com/en-us/Windows-8/resolve-Windows-blue-screen-errors

• When I download adobe after affects cc 2015 after approximately 87 percent done I get error and stop the download how to fix this?

  When I download adobe after affects cc 2015 after approximately 87 percent done I get error and stop the download how to fix this?

  Hi Giovannil27088677,

  If you're still having trouble installing it, please refer to the following thread Photoshop CC install hangs at 48%

• Dell Dock exe "application not found" error after cleaning malware virus and fix registry problems

  Hey guys!, I had a problem with malware. (In particular this Vista Internet Security * who seems to knock everyone). I fixed this problem as well as the issue with the thing of my Microsoft Security (which sets the windows Defender) and then I went through and fixed my registry problems who came later as some aftereffect of the virus. (Phew!) Now that it is finally all done I click on my dock dell to go to internet explore and BAM! "Application not found" in an area which the header indicates dell dock.exe. Now I just got through my fixing registry problems so that I have all my .exe programs can open without a problem. All other issues are resolved except this! What's wrong?! Please, someone help. (I can get Internet explore any other way, but it's not my PC and I don't want the owner to think I broke it) PS Can't do system restore I would lose my updates which are very necessary can't do a registry fix because I already did and I don't want to mess with it again is not sure if reinstall dell dock should solve the problem I just install IE9 and all my other icons in dell dock work very well

  Hello

  the Dell Dock is nothing to do with the Vista software; It is software installed by Dell

  If the information below correct it, re-download the Dell Dock or contact Dell

  http://www.DellDock.com/

  Dell support

  http://support.Dell.com/

  or ask in the Forums of Dell Support

  http://en.community.Dell.com/support-forums/default.aspx

  Make sure that all of the malware is gone

  This name of Malware VISTA INTERNET SECURITY 2011, etc. is but one of many that will this 'family' of malware under

  Windows XP rogue name	Name of Rogue Windows Vista	Windows 7 Rogue name
  XP Antispyware	Vista Antispyware	Win 7 Antispyware
  XP Antispyware 2011	Vista Antispyware 2011	Win 7 Antispyware 2011
  XP security	Vista security	Win 7 Security
  XP security 2011	Vista Security 2011	Win 7 Security 2011
  XP Internet Security	Vista Internet Security	Win 7 Internet Security
  XP Internet Security 2011	Vista Internet Security 2011	Win 7 Internet Security 2011
  XP Antimalware	Vista Antimalware	Win 7 Antimalware
  XP Antimalware 2011	Vista Antimalware 2011	Win 7 Antimalware 2011
  Keep XP	Vista guard	Custody of Win 7

  Follow the exact deletion on the link below

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2011

  also run the sfc/scannow command.

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  If SFC detects the main problems it can't fix you may need to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

  read the below tutorial on how to perform a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html