Dll errors... Help, please

Similar Questions

• Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  has recently had to restore my old computer. When I try to play games on facebook its telling me to install adobe flash plyer x. but it will not be installed. Error Msg: d3d9.dll lack, not found the procedure entry point, not able to locate the ddetry10, not able to locate ddraw.dll. Help, please!

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Dirext-x-file-d3d9dll-is-missing-Baz/2c639497-CFBA-4C6D-9155-f946f8dc1a45

  It will be useful.

• _ "Windows Explorer has stopped working" error - HELP Please! __

  I tried pretty much everything I can try in this thread, and nothing seems to work! It is very probably the the most annoying problem that I experienced with windows! I can open all the files and programs it is just that the 'Windows Explorer has stopped working"error appears literally every 5 to 15 seconds!  I click on cancel, and the other appears which says "Windows Explorer restarts" help please, I've never been more ready to give up on windows for good!

  Thank you, Bryan

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Install device driver CD/DVD of Windows 7 error HELP Please!

  Hi all, I currently have a problem extremely weird about installing windows 7. I get the following message:

  "A required CD/VDVD drive device driver is missing. If you have a driver on floppy disk, CD, DVD or USB flash drive, please insert it now. »

  I downloaded the Windows 7 upgrade utility and it said everything was fine except for messenger, something aero and my printer.

  Any ideas anyone? Thanks in advance.

  ARGH its boring that his does not work. People claim that its something to do with writing speed but I installed the copy on my computer laptop too. I downloaded my Windows 7 since the MSDN site and have tried 3 downloads separated and all come with the same question.

  I found the answer, I hope this will help others.

  1. I've updated my BIOS and drivers, the DVD burned on the slowest speed possible (x 2), but without success.
  2. reinstalled windows XP and run the Upgrade Advisor, and he says I can tun Windows 7 very well.
  3. tried installed and got the error error driver CD/DVD.

  Step 3 confused me and to be honest a little fing and jeffing, BUT although the Upgrade Advisor said that everything was OK, I decided to go to my local "Rip Off World" and buy an external DVD drive. Went into the BIOS and the value that it is the primary boot device and hey presto it was install and sorters suitcase!

  I could not find the drivers for my CD or DVD so, as that was the issue before the installation of Windows 7 (with external DVD drive), I tried I pulled the power cables of my internal CD and DVD players. After I installed Windows 7 now, I placed the power cables, turn it back on and guess what... Windows 7 detects and updated the drivers for me!

  Computers are sometimes a pain in the * and other great times!

  Hope this helps others.

• Smartphones blackBerry 507 error (help please before go me crazy)

  Hi guys,.

  This morning I tried to update my Curve 8310 on the latest operating system, using BB Manager.

  He kept coming up with an error... "Application cannot connect to your device" I clicked retry again and again but nothing. So I click on cancel, and now I have no OS on my BlackBerry.

  

  Sometimes just with a logo of the application with 507 under him on the screen.

  I downloaded the latest OS and tried again, but it won't work.

  I tried an older operating system and it will not work.

  I tried to restore a backup, but it won't work.

  IM completely lost on what to do... I need this work on Monday

  Please can someone help me,

  Thank you!

  1. connect your USB cable to your PC in the BACK port, or another to the back of your PC, not a hub or the front USB port.

  2 here is a link to the latest OS released for the 8310. Use it.

  507 number only means that the Desktop Manager does not see any OS loaded into the device. Log on to the PC again and run Loader.exe again and it should load the operating system on the device.

  More instructions and download here:

  http://www.BlackBerryForums.com/General-8300-Series-discussion-curve/211998-latest-OS-8310-4-5-0-304...

  Good luck.

• Microsoft Visual C++ runtime Library runtime error help please

  I hope that someone will please help me with this, I can't use my Photoshop elements 9 and need!

  I found the instructions here ://helpx.adobe.com/photoshop-elements/kb/microsoft-c-runtime-error-launcing.htm http://http l

  and am running windows 7 Home premium.

  I want to try the instructions in the link above and my question is basically, am sure that, for most of you, but how I "navigate until" and where exactly I enter the path of the file so I can try this solution?

  I tried down on the start menu "search programs and files" and not come up with anything.  I also have to where my folder options displays the hidden files and folders, but am still not find C:\Program Data\Adobe\Photoshop Elements\9.0\Locale\en_us\

  If anyone can help me to learn at this point exactly how can I do to rename?

  Hi jo Mango,.

  Yes, I finally thought it out on mine (the technique how to dispose of anyway) and it's working now, thank God!

  Just follow the instructions here: http://helpx.adobe.com/photoshop-elements/kb/microsoft-c-runtime-error-launcing.html

  I had to type the file path in the address bar at the page.   Also if you can't find anything on your computer like that, go into your control panel and find the folder options and make sure that you have enabled to display the hidden files and folders.

  Hope that helps!

  This guy explains how pretty good http://mgxp.blogspot.com/2011/10/runtime-error-when-starting-photoshop.html

• DLL errors - help

  1. how to resolve the following error message: C:\Windows\neti35.dll "module is not found."

  2. how to resolve the following error message: C:\Windows\iqawelohawuro.dll "module is not found."

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you can't find a good explanation for the name of the file in a Google search, re chances while your system is currently or has been infected with malicious software.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• BlackBerry Smartphones BB sync error - help please?

  New BB user...

  Not able to synchronize calendar outlook to the device. 0x80040fb3 error code.

  seems to be getting about 3/4 across and then fail.

  Any advice?

  Thank you

  Please read this link

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB14818&sliceId=2&docTy...

• Download error HELP PLEASE

  So I try to get Adobe Creative cloud... But all that happens is a download error... I tried reinstalling SEVERAL times and it still does not

  Try creative cloud help | Download error in the applications tab of Creative Cloud Desktop Application

• Run database query error; Help, please

  I had trouble getting this recording to publish on my DB, I have the same shape, put in place to modify an existing record, as well as the addition of a new record. I have 2 errors, can someone help me see what I'm doing wrong? I write the code that I have a problem with and two errors. I'm sorry, this is probably simple. But I looked at this code too long and miss me the problem.
  
  Code:
  < cfelseif ParameterExists (Form.btnEdit_OK) >
  
  < ParameterExists (Form.RecordID) cfif >
  < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
  "< cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
  UPDATE SEEevents
  SET SEEevents.display =' #form.display #', SEEevents.title =' #form.title #', SEEevents.eventDate ='#eDate #', SEEevents.eventTime =' #form.eventTime #', SEEevents.location =' #form.location #', SEEevents.contact =' #form.contact #', SEEevents.phone =' #form.phone #', SEEevents.fax =' #form.fax #', SEEevents.email =' #form.email #', SEEevents.URL ='#form. URL #', SEEevents.sponsor =' #form.sponsor #', SEEevents.Body ='#form. "PDSeditor #
  WHERE RecordID = #form. RecordID #.
  < / cfquery >
  < cflocation url = "events_RecordView.cfm? RecordID = #Form.RecordID # ">"
  < cfelse >
  < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
  "< cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
  INSERT INTO SEEevents (display, title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body)
  VALUES (' #form.display # "," #form.title # "," # #eDate # "," #form.eventTime # "," #form.location # "," #form.contact # "," #form.phone # "," #form.fax # "," #form.email # ', ' #form.) URL #', ' #form.sponsor # ', ' #form. PDSeditor #')
  < / cfquery >
  < cflocation url = "events_RecordView.cfm? RecordID = #GetNewRecord.ID_Field # ">"
  < / cfif >
  
  Here are the two errors:
  error when editing an existing record:
  
  Run database query error.
  [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Too few parameters. 1 expected.
  
  The error occurred in C:\websites\108392zj7\admin\events_RecordAction.cfm: line 70
  
  68: < cfif ParameterExists (Form.RecordID) >
  69: < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
  "70: < cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
  71: UPDATE SEEevents
  72: SET SEEevents.display =' #form.display #', SEEevents.title =' #form.title #', SEEevents.eventDate ='#eDate #', SEEevents.eventTime =' #form.eventTime #', SEEevents.location =' #form.location #', SEEevents.contact =' #form.contact #', SEEevents.phone =' #form.phone #', SEEevents.fax =' #form.fax #', SEEevents.email =' #form.email #', SEEevents.URL ='#form. URL #', SEEevents.sponsor =' #form.sponsor #', SEEevents.Body ='#form. "PDSeditor #
  
  
  
  --------------------------------------------------------------------------------
  
  SQL UPDATE SEEevents SET SEEevents.display = '0', SEEevents.title = 'VIP dinner', SEEevents.eventDate='04/13/2007', SEEevents.eventTime =' 8:30 pm - 23:00 ', SEEevents.location = 'person Restaurant', SEEevents.contact = 'person', SEEevents.phone ='(000) 000.6262', SEEevents.fax = ", SEEevents.email ="[email protected]", SEEevents.URL =' http://www.person.com', SEEevents.sponsor =", SEEevents.Body =' < font size = "2" face = "Verdana, Arial, Helvetica, sans serif" > < strong > Notes: facilities > bookings must be confirmed with a great Cardinal < br > < strong credit > price : < Facilities > Advance: $125. per person (including drinks and tips) at the door: $150. per person, < i > Limited places available < /i > < / police > ' WHERE RecordID = 13
  DATASOURCE ETUCE
  VENDORERRORCODE-3010
  SQLSTATE 07002
  
  This is the error when publishing a new record:
  
  Run database query error.
  [Macromedia] [SequeLink JDBC Driver] [ODBC Socket] [Microsoft] [ODBC Microsoft Access driver] Type mismatch of data in the expression of the criteria.
  
  The error occurred in C:\websites\108392zj7\admin\events_RecordAction.cfm: line 78
  
  76: < cfelse >
  77: < cfset eDate = DateFormat (form.eventDate, "mm/dd/yyyy") >
  "78: < cfquery datasource =" "#sitedatasource #" username = "#siteUserID #" password = "" #sitePassword # "dbtype ="ODBC">"
  79: INSERT IN SEEevents (display, title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body)
  80: VALUES ("#form.display #", "#form.title #", "# #eDate #", "#form.eventTime #", "#form.location #", "#form.contact #", "#form.phone #", "#form.fax #", "#form.email # ', ' #form.) URL #', ' #form.sponsor # ', ' #form. PDSeditor #')
  
  
  
  --------------------------------------------------------------------------------
  
  SQL INSERT INTO SEEevents (display, title, eventDate, eventTime, location, contact, telephone, fax, email, URL, sponsor, body) VALUES ('0 ', 'test', ' # #03/25/2007 ", 12:47 ', 'Home', 'CJD', '' 000-000-0000,", '[email protected]', 'www.saratogaexpo.com', ' ', ' ')
  DATASOURCE ETUCE
  VENDORERRORCODE-3030
  SQLSTATE 22018
  
  Can someone help me tweek this code? I see double at this stage. Thank you.
  
  Phoenix
  
  

  I thought about it. It's a java tag used by my editor throwing the error in the backup / update of the function.

  Thanks a lot for all the help everyone!
  If I can ever help anyone in any way, feel free to ask.

• CFSET error, help please

  Why does:
  
  < cfsetting enablecfoutputonly = "yes" >
  < CFSET TemplatesAndForms = application.menuWords. "#session. "MyLanguage # TemplatesAndForms >
  < cfsetting enablecfoutputonly = "no" >
  
  produce this error
  
  A CFML variable name cannot end with a '. ' character.
  The application.menuWords variable. ends with a '. ' character. You must provide a key of the additional structure or remove the "." character.
  
  and what should I do to fix it.
  
  Thank you very much
  
  Jedi

  > Try like that.

  >
  >
  >

  No, don't.

  Follow these steps:

  <>
  TemplatesAndForms = application.menuWords [session. MyLanguage]. TemplatesAndForms >

  It might be useful to read this:
  http://livedocs.Adobe.com/ColdFusion/8/htmldocs/arrayStruct_07.html#1126503

  --
  Adam

• Windows XP Pro won't let me install net framework 1.1 out disc, always error, help please

  I have the same exact configuration, Windows XP SP3 etc that I ran on my Dell. Now for some reason, my most recent HP wont let install me net framework 1.1?

  Not really sure what you're trying to reach, then...

  Troubleshooting failure to install .NET framework
  http://blogs.msdn.com/b/varungupta/archive/2010/06/22/troubleshooting-NET-Framework-4-install-failures.aspx

  Downloads for framework if necessary:
  http://msdn.Microsoft.com/en-us/netframework/aa569263.aspx

  Note: Mailbag: what version of the .NET Framework is included in which version of the operating system? http://blogs.msdn.com/b/astebner/archive/2007/03/14/mailbag-what-version-of-the-NET-Framework-is-included-in-what-version-of-the-OS.aspx

• Run DLL, error loading C: / /.

  Error loading C:/Users/username/App Data/Local/KBDBDi.dll

  Help, please

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• system32\hal.dll. missing. computer will not start. Help, please. I don't have an xp cd. XP is installed on the hard drive

  Hello
  My laptop is not at all start. It is just coming up with the error message "windows root>\system32\hal.dll. missing. Please reinstall a copy of the above file.
  Everything I can find on the web so far tells me to reinstall via an XP CD. My version of xp was preinstalled, because it's a computer dell laptop.
  Can someone help me?

  Hello
  Please take a look at this article and follow the steps in troubleshooting bottom of the page.

  http://support.Microsoft.com/kb/314477

  I hope this helps. Just reply to the results.

• Whenever I boot Windows XP (fully updated), I get a message saying that 'wasuoba.dll' is missing. I can't find any information what so ever on this .dll file any where. Help, please!

  Whenever I boot Windows XP (fully updated), I get a message saying that 'wasuoba.dll' is missing. I can't find any information what so ever on this .dll file any where. Help, please!

  As I said, my Windows XP is fully updated. I get this error for a while now, so not sure what has caused it and when I started to do.
  In general, I was ignorant, but recently my PC feels like it becomes less stable.

  I'm surprised that it returns no results on any search engine.

  Whenever I boot Windows XP (fully updated), I get a message saying that 'wasuoba.dll' is missing. I can't find any information what so ever on this .dll file any where. Help, please!

  As I said, my Windows XP is fully updated. I get this error for a while now, so not sure what has caused it and when I started to do.
  In general, I was ignorant, but recently my PC feels like it becomes less stable.

  I'm surprised that it returns no results on any search engine.

  Assuming that your spelling is correct, your computer is probably infected by malicious software. Download, update and perform a quick scan with Malwarebytes.

  Malwarebytes.org

  How to use Malwarebytes

• Help start the old computer system32/hal.dll error not installed bugs not working-

  I want to transfer files from your old computer to new computer with Vista Easy Transfer.  In an attempt to start former computer, received the system32\hal.dll error.  I followed the instructions to fix proglem reboot, press / hold down f8, etc., but that has not worked.  I could reinstall the operating system Microsoft Windows XP Professional, including Service Pack 1. But if I do then I lose all files, documents, photos, everything from the old computer... at least, I think it's going to happen.  Can you tell me what are my options to ensure that I don't lose any of my data.

  This behavior can occur if one or some of the following conditions are true:

  By default in the [Boot Loader] section of the Boot.ini file is missing or invalid.

  Windows XP is not installed in the location specified in the Boot.ini file.

  The Ntoskrnl.exe file is missing or damaged.

  The path of partition in the Boot.ini file is not set correctly.

  General failure.

  The article below should help you solve this problem.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  You must have a Windows XP installation disk to perform the steps listed in the article above.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.