DM4 memory card reader won't read the Extreme Pro Sandisk SDHC card

Similar Questions

• Extreme pro sandisk ssd on SCSI: how to check the status?

  Hello

  I have a SSD Pro Extreme Sandisk 240 GB on my system.

  I've seen it can be detected and status verified by the dashboard of sandisk.

  A big company like Sandisk, which looks very bad for me, because it's a very long time (YEARS) the dashboard does not support scsi controller detection and management.

  So, please let me know how to check and manage my SSD Sansidk in absence of decision-making in charge of your dashboard.

  I don't want to find problems after the harshness.

  Thank you

  ALberto

  Hi albedo.

  Unfortunately, these drives are designed for the SATA interface and some orders may not go through interaction SCSI-SATA, dashboard controls may be among them.

  In this case, you can check your statues in car with software or third-party tools and share the result with us if you have any concerns. Dashboard is an add-on software that comes with the player, but not mandatory to use, and it won't affect your use if you do not dash

• Satellite M60 - 104 - memory card reader does not read the MemoryStick pro duo

  Hi guys,.

  built in card reader on my laptop does not recognize/read stick memory Sony pro duo - is this normal or not?
  I know it must read MemoryStick pro, but not sure about pro duo.

  Can you help me please?

  Hello

  > the built in card reader on my laptop does not recognize/read stick memory Sony pro duo - is this normal or not?

  Of course, this could be a normal behavior as not all cards are compatible and taken in charge.
  I would recommend look in the user manual because you can find there information cards can be used in the portable card reader!

• Cannot read the Camileo Pro HD files

  Hello!

  It's really frustrating. I filled out my SD card on my Camileo Pro and have fixed the camera my PC to extract the files. Windows guard saying new hardware found but will not recognize the device and keeps wanting to search for drivers.

  I was on the Toshiba upgrade download site to the latest driver and put in the CD provided DV decoder. The files appear in the DCIM folders on my computer but nothing will play or extract except for a few second excerpt before freezing.

  I've also attached the camera to my laptop, and again, I met the same problem. My computers are running XP SP2.

  Thanks for any help

  Hello

  I n t have this cam but I have another cam that is able to record HD video.
  I could play these files after that I have recorded on the HARD disk.
  The cam was simply connected using the USB cable that was supplied with the cam.

  I put t know what kind of video file that you have but you should google a bit, but for this file format and you should get the hits and the details.

  I use VLC Player to watch these saved files. This drive accepts most standard video.

  By the way; check your user manual for details and how to play the recorded videos!

• 16 GB SanDisk Extreme Pro SDHC UHS - I memory vs Kingston ultimateX card

  Currently our House has 2 cameras, a Sony Cybershot DSC TX5 and a Nikon D90. Cybershot uses a Promaster SDHC 4 GB then the Nikon uses a Kingston 16 GB UltimateX 100 x SDHC.

  These cameras are used for still images and animated images, so I was wondering, did anyone know the differences between the above mentioned cards in all terms and the 16 GB SanDisk Extreme Pro SDHC UHS - I memory card (other size, I mean).

  Thanks :)

  I don't know how critical these cameras are, but when you use cameras like the Canon XF-300 or XF-305, Sandisk is the preferred brand. Extreme against Extreme Pro gives you the same functionality, including sub - and appreciated, but the Pro version is almost double the price. The SD card on this device for custom image profiles and firmware updates that I use is the Sandisk 16 GB Extreme, not the Extreme Pro.

  Admitted, CF or SD is of course incomparable, but if I were in your shoes, I wouldn't go to Sandisk, Kingston, and according to the difference in price, I would probably stop the extreme version, do not spend the additional amount on the Extreme Pro.

  Just my $0.02

• Satellite Pro P100-327: memory card reader does not read the Memory Stick Duo

  I just received a P100-327
  aShop http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/productPage.do?service=UK&PRODUCT_ID=121991&Toshib = true)
  According to this page, is supposed to have "1 x 5-in-1 Bridge Media slot (supports SD Card, Memory Stick®, Memory Stick Pro, MultiMedia Card, xD-Picture Card)", but the pdf manual that comes with it says that it supports not the Memory Stick Duo, Memory Stick Pro Duo or mini-SD.

  However, I have a Memory Stick Pro, and a Memory Stick Pro Duo in a Memory Stick Pro adapter, and the reader can't read one of them (they both count as Memory Stick Pro, which should be readable, right?)

  Would I be able to read my Memory Stick Pro cards? Why I can't because it says that I should be able to? Should I install something first?

  Hello

  To my knowledge and according to the manual of bridge housing media supports media type
  -SD memory card
  -MultiMediaCard, xD-Picture Card
  -Memory Stick
  -Memory Stick Pro

  Please note that the Memory Stick and Memory Stick Pro are not the same in the Memory stick Duo and Memory Stick Pro Duo.
  Don t mix.

• The M70-267 Satellite internal memory card reader does not work

  Hello

  Internal memory card reader no longer works on my M70-267.
  Device Manager reports the error with the driver of the bus PCI 6 mass storage controller, device 4, function 3.
  The first problem, the result of this is?

  Help, please
  thanx

  Hello

  Yes, this mass storage controller could be the card reader. So, you can try to reinstall the drivers, which can be downloaded here:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  or you can remove it from the Device Manager and restart your machine

  or, if that didn't help then you should send your machine to a service partner chartered for an assessment of health/repair of equipment.

  To find the closest, you can check out this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck
  See you soon

• Pavilion HPE-560z: Pavilion Elite Desktop - replacement of the memory card reader

  Hello

  My memory card reader began acting after 5 years of use. It detects the media all right, I can see the list of files, but when you copy them, the LED will market and file transfer is extremely slow. I would like to replace the card reader.

  Anyone know which internal drive is insert in the case of my hpe-560z Fund? Can we all 3.5 "card reader or there are specific requirements to pay attention to the?

  Thank you.

  Hello

  Please ysé part number from the following link:

  http://PartSurfer.HP.com/search.aspx?SearchText=XX094AV

  who is 575842-001 for Memory card reader-15 IN 1, slot 4.

  You can buy through top of store or try at Amazon:

  https://www.Amazon.com/HP-575842-001-USB-15-in/DP/B004A8JIO2

  Kind regards.

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• Satellite L670-DX1 - after the installation of SP1 cannot use the memory card reader

  Hello

  Since I upgraded my Satellite L670-DX1 of Win7 64 bit to Win7 64-bit SP1 (2 days ago) I can't use my memory card reader, he always says it is a bad card and I should reformat the card with any card.

  Does anyone have a similar problem or better yet a solution for me?

  Greetings

  You have installed SP1 using Windows update option?
  Have you tried to roll back the OS to an earlier time to see if the card reader is working properly again?

  Have you tried reinstalling the driver of the card reader?

• The card reader memory 15 one in the e9250t Elite does support the SDXC memory card

  The card reader memory 15-one in the Desktop Elite e9250t does support the SDXC memory card?

  What memory SDHC card?

  That is a good question. Is there a part number on the memory card reader?

  Theuser guide provides the following information only.

  Make sure that the memory card is one of the types supported:
  CompactFlash (I, II, and Microdrive), Memory Stick, Memory
  Stick Pro, MultiMedia, Secure Digital, SmartMedia, or xD.
  Some models may support additional types, such as the SDHC
  (Secure Digital high capacity) memory cards

• location of the reader of memory card on Pavilion h8 - 1117c

  Well, I just this computer and I'm supposed to have front 15 in 1 memory card reader, but can't seem to find it.  Is someone can you please tell me where it is?  Sounds stupid, I know.

  Thank you very much!  I felt so stupid, but there is no indication that she is there and could not find anything on the internet until I came across you

• Windows XP prevents me from installing the new hardware as my Canon camera and memory card reader.

  original title: problem with new hardware

  last week, windows xp prevented me from installing new hardware, namely a canon digital camera and a memory card reader. Although the system recognizes the material into the machine, when you are looking for auto install it asks me for the service pack 3 cd, which I did not. I never had problems, install new hardware before. Any ideas why this happens?

  Hello

  · What is the service pack installed on the computer?

  · What is the model number of the canon camera?

  · What is the exact error message that you receive with error code if any?

  If you have installed service pack 3 on the computer then you can try the method and check them off below if it helps:

  Change the registry to point to the installation of Windows XP Service Pack 3 files

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. Click Start, click Run, type regedit in the Open box and then click OK.

  b. find the following registry key:

  c. HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Setup

  d. in the right pane, right-click ServicePackSourcePath, click on edit, type % windir%\ServicePackFiles, and then click OK.

• Error message - the memory card cannot be read during the closing of Quickbooks

  I get this when closing QuickBooks (instruction at 0x56461f49 reference to 0x02cd4360 memory. The memory card might not read).

  Hello

  The question you have posted is related to Quick books, I suggest you to send your request in the forums of Intuit for better support. Click on the link below.

  http://support.QuickBooks.Intuit.com/support/articles/SLN40784

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• Windows thinks flash drive memory card reader - will not let me import the photos.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  I have Windows XP on my lap top. When I plug my USB memory card reader, Windows thinks that it is a flash drive, and if I try to open it, it just says: "insert in the drive. There is no drivers for the memory card reader - it was designed that way, I think. The memory card reader used to work fine with my laptop, but no more.

  Can someone tell me what's happened and how to fix it? Thank you.

  ====================================
  Just guess... could this be a hardware problem?

  If you have more than one port... try USB to another.

  Maybe you can connect the camera to your laptop via
  USB cable and see if you can download your photos.

  Maybe the following article offers some ideas:

  (310575) advanced troubleshooting tips for
  General problems of USB in Windows XP
  http://support.Microsoft.com/?kbid=310575

  Good luck finding the solution.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.