DMA2200 - Media Center Audio, the DVD no sound

Similar Questions

• "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  When I insert one no matter what DVD in my Dvd Player, I get a message indicating

  "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  I have Windows XP Professional, I have not played a DVD on the computor in several months. How can I fix this.

  When I insert one no matter what DVD in my Dvd Player, I get a message indicating

  "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

  I have Windows XP Professional, I have not played a DVD on the computor in several months. How can I fix this.

  =========================================
  If you have a DVD decoder (for example Power DVD) try reinstalling it.

  If it is not... Take a look at the following site:

  Info about DVD decoders:
  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  Also, you could try one of the players following freeware that will play DVDs:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic
  http://www.filehippo.com/download_media_player_classic/
  (just unzip and run it... (no installation required)

  Media Player Classic Home Cinema
  http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
  (works on XP/Vista/7)

  Also, it may be interesting to try to install one of the following Codec Packs:

  * Proceed at your own risk *.

  (1) news of CCCP (combined Community Codec Pack)
  http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

  (2) K-Lite Codec Pack (full)
  http://www.filehippo.com/download_klite_codec_pack/

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Can I watch a show that is currently recording in Windows Media Center since the beginning of this show?

  I use Windows Media Center to record TV shows.  Suppose I record a show in an hour at 6:00, and I decide to 06:10 I want to watch this show from the beginning. (while it's recording)

  Is it possible to do this in Windows Media Center?  The media file of the recording of the show is not accessible until it is 100% finished recording.

  I am looking for a way to watch a show while it's recording, but to do so since the beginning of the show (after the start of recording)

  Thank you

  Hello

  Im sure that you can watch TV recordings during live TV recording, but you can't watch a program during its course of recording.

  See also:

  This management recorded TV in Windows Media Center: frequently asked questions

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

• Media Center closes the program unable to resolve internet tv, etc.

  I tried so many different attempts to get a FIX please help

  Have what methods you tried?

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again.

• Windows Media Center, says "the disk is full delete content or change the area of sotrage.

  Windows Media Center, says "the disk is full delete content or change the area of sotrage.

  What should I do? I don't think it's completely just a mistake, where us the files and I is not even saving programs!

  WMC stores the file in the Public TV folder saved on your hard drive by default, it is located at C:\Users\Public\Recorded TV.

  Check how much space is there.

• Media Center of the Signal course to record live tv & regular VISTA

  RE: Windows Media Center signal loss

  I started getting errors while recording in Windows Media Center, the program hangs and fails to save and I get the error message of signal loss.

  I checked my connections USB, card TV tuner, cable connection, and they are very good.  I use Wintv 7 now and record very well. I have WINTV7.1 for the HAUPPAUGE WINTV HVR - 850 external USB connected to the tv by similar cable card. I searched various sites of Mircrosoft support and not been able to find a solution or explanation satisfatory.

  However I have my search I found possible solutions. These solutions involve Windows Media Center for Windows 7 and I want to know if they will work for VISTA sp2.  The Hauppauge site displays links for Windows 7.

  Support site for Win Tv 7, Hauppauge hvr850;

  http://www.Hauppauge.com/site/support/support_hvr850.html

  http://www.Hauppauge.com/site/support/MCE_update.html

  Microsoft support site (I think that is the difficulty that would help me better);

  "Fixed in this update

  On a computer that is running Windows 7, you use Windows Media Center with a TV tuner analog Watch analog TV live. In this case, you receive messages from overlay low intermittent flow in Windows Media Center.

  Windows Media Center monitor the inflow of over-the-air television. Without this follow-up, the bit rate very low fall when the analog input of the TV is low or does not have a signal. This causes a black screen or a static screen. With this follow-up, Windows Media Center displays a message of overlay to indicate a possible problem with the inflow during the analog input of the TV is low or does not have a signal.

  However, the method that is used to monitor the inflow on analog signals is too sensitive. This may cause a false alarm of a low flow.

  Note Several regions have switched over to digital broadcasting. There are hardware configurations in digital programs to convert the digital signal into an analog signal. "These configurations can include set-top boxes and digital-analog-switch-boxes".

  Difficulty 981130 quote:

  http://support.Microsoft.com/kb/981130

  -------------------------------------------------------------------------------

  2nd possible solution from Microsoft Support;

  An update is available for Windows Media Center in Windows 7. This update corrects a blocking problem that occurs when you use a TV tuner in Windows Media Center. When this problem occurs, you may experience one of the following symptoms:

  • You receive an error message similar to the following, when there is no conflict apparent tuner:
    Conflict of tuner
  • You receive an error message similar to the following when there is available tuners:
    No tuner available to meet the current demand
  • The Windows Media Center Receiver Service (Ehrecvr.exe) stops responding and you have to restart the computer to recover this service. »

  Quote from Micorsoft difficulty 981129

  http://support.Microsoft.com/kb/981129

  I did this as detailed as possible to help others with similar problems.

  I believe that Micorsoft hotfix support kb 981130 will solve my problem with loss of signal and gel of the records.   But the solution is designed for windows 7 and there is no information on the page for Windows Vista.

  Summation:

  Problem: Loss of signal and inability to record in Windows Media Center Vista

  Material: Hauppauge Wintv HVR - 850 with software wintv7 and drivers updated.

  Q 1 the solutions above Ko 98130 will work for Windows Vista Media Center?

  Q 2 is there a solution similar to 981130 available KB?

  Are Q 3 there other possible solutions for the loss of signal in Windows Media Center in Vista?

  Thanks for your help, I hope you can answer quickly.

  Richard

  Hello, Richard

  Do you still have the same problem after performing the steps that was you on the list?

  If so, you can try to run a SFC scan to make sure that the system files are intact: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7

  The only other option I can think is that the signal is in fact weak and therefore, the signal is lost.

  Assuming that the signal strength is good and the System File Checker was not working, the next step that I have to recommend would be to back up your files on an external and reinstall Windows:

  Install, reinstall, or uninstall Windows
  Back up your files

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Xbox 360 scan windows media center for the new music?

  I just added some new music to my windows media center and the music does not appear on my xbox 360. is there a way to synchronize?

  Hi nwills,

  Ideally, the Xbox 360 should automatically scan if new music is added to Windows Media Center. However, you can also manually synchronize as follows.

  a: you can connect the Xbox. The Xbox Dashboard, select 'My Xbox', then select 'Windows Media Center' to receive the eight-digit code. This code allows your Xbox to recognize your media player on your computer.

  b. you can set up Windows Media Center on your PC. Click on the "tasks" and select "Add Extender". A screen will appear asking you to enter the eight digit of your Xbox 360 code.

  c. play music on your Xbox. Select 'Windows Media Center' in the menu 'My Xbox' and start playing music.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows Media Center Download the latest TV programming guide

  With the help of Win 7 Home Prem SP1 64-bit.

  Suddenly, Windows Media Center Download the latest TV programming guide.  It worked fine, then all of a sudden it stopped.  WMC wonder if I want to download the latest Guide Listing.  I click on the download option, then he said: 'Guide lists have been downloaded successfully. Yet, when I go into my program Guide for all the different TV channels (everywhere in the air, no cable or satellite) it says "No data available" in other words not it offers for download, guide, said that he never actually makes the fact.

  I don't know how or why this happened. I tried to download the application manually Guide by going to tasks-> settings-> TV etc and it does the same thing. It says "Guide Listings were downloaded successfully" but nothing.

  How to fix?

  PS my TV tuner and everything works fine. My internet connection is perfect. Am really confused.

  Re-run the installation of the TV, try a different zip code and then switch back to your own if this does not work
  Thanks for posting https://connect.microsoft.com/site1145
  You must include your provider name and postal code

  Note: You may need to REGISTER to create an account, then sign in to see the feedback on the left link.

• How to watch Internet TV for Windows Media Center to the Japan?

  Hello

  Is it possible to watch Internet TV for Windows Media Center to the Japan or watch television show or movies without TV tuner and cable?

  I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.

  My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.

  I still believe that Internet TV is supported in the Japan.

  You have an idea for this troubleshooting?

  Please help me.

  Thank you

  Monday, December 29, 2014 08:36 + 0000, avocado0227 wrote:
   
  > Can we watch Internet TV for Windows Media Center to the Japan or watching television or movies without TV tuner and cable show?
  >>
  >>
  >>
  > I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.
  >>
  >>
  >>
  > My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.
  >>
  >>
  >>
  > I still think that Internet TV is supported in the Japan.
   
   
  Microsoft has removed completely support Internet TV in September 2012.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• crashing Windows media center at the start of video library

  Whenever I go to the video library in Windows Media Center, I receive a report appcrash. (I have 1200 videos added in a directory)

  Windows 7 SP1 32 bit
  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-crash-when-starting-video/f117f6da-3283-E011-9b4b-68b599b31bf5

  HI player67,

  I suggest you follow the steps below

  Method: 1

  Enable and disable Windows Media Center. To do this, follow the steps below:

  a. Click Start, click Control Panel and then double-click programs and features.

  b. click on Turn Windows Features on or off.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. extend the functionality of media

  d. turn off Windows Media Center of the box, and then click ok

  e. follow the same steps as above, this time place a check mark against the Windows Media Center box

  f. click Ok, and then restart the computer

  Method: 2

  Perform a check of the system files; read the following article to run the System File Check

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

• When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

  I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

  screen A___
  WMC has discovered the following:
  Analog cable (1 Tuner)

  Other tuners or TV signals were detected but will not be configured.
  (Show details)

  Is this Setup correct and complete?
  o Yes, configure TV with these results
  o no, show more options
  ________________
  When I click on show details, it is said:

  screen B___
  No TV Signal
  If a TV signal should be present, check your signal for following tuners connections and try again:
  Hauppauge WinTV 418 BDA Tuner
  ________________
  There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

  When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

  I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

  I would really appreciate any help and if more details are required, please let me know.  Thank you!

  -Doug

  I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

• Media Center of the video window - serious on dvd has audio/video desynchronization

  Whenever I try to burn recorded videos on a dvd using Windows Media Center, the video and audio are always synchronized when DVDs are read. I tried several times and still the same problem experiece. I have no problem with any aspect of the Media Center and all other DVDs play fine on my PC, so I guess that something goes wrong during the burn process.

  Any ideas what can cause this problem and how to fix it?

  Hello
   
  Thank you for visiting Microsoft Answers.

  Could you please let us know how you try to burn to dvd?
  You use any 3rd party dvd burning software?

  There is possibility that this problem can be caused because of the drivers.
  I suggest you to update the drivers for the video, sound and TV tuners adapters and verify.
  Steps to uninstall the sound, Tuner and video drivers.
  NOTE: You will need to do one thing at a time.
  Uninstall and reinstall the drivers on the computer.
  1. open the programs and features.
  2. check if the device driver is listed.
  If this is the case, then right click on the device that is listed and click on uninstall, then Yes to confirm.
  NOTE: Sometimes you will get a notice to restart the computer to finish uninstalling the driver. If you do, then click Yes to restart the computer when you are prompted.
  3. close the programs and features.
   
  Uninstall using Device Manager
  1. open the control panel (Classic view).
  2. click on the Device Manager icon.
  3. click on continue for UAC prompt.
  4. click on the + sign next to the device you want to uninstall to develop.
  5. right click on the listed device, and then click Properties.
  NOTE: You can also click on uninstall
  6. If you want to uninstall the device-
  NOTE: This doesn't uninstall the device and let the device driver installed for the device.
  (A) uncheck the button remove the software driver of this box of the device.
  NOTE: If you do not have this option, then only the device is uninstalled.
  (B) click OK.
  NOTE: Sometimes, you may be asked to restart the computer to finish uninstalling the driver. If you do, then click Yes to restart the computer.
  7. close Device Manager, and then restart the computer. Uninstall and reinstall the back of the computer.
   
  Alternatively, you can try to perform the scan of the file system [SFC] checker on the computer.
  1. click on the Start button
  2. on the Start Menu, click all programs followed by accessories
  3. in the menu accessories, right-click on command line option
  4. in the drop-down menu that appears, click the "Run as Administrator" option
  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
  6. in the command prompt window, type: sfc/scannow then press enter
  7. a message is displayed to indicate that "the analysis of the system will start.
  8. be patient because the analysis may take some time
  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
  11 after the scan finished, close the command prompt window reboot the computer and check.

  If you have installed any 3rd codec part on the computer, try to uninstall and reinstall and check.

  It will be useful.
   
  Kind regards

  Niranjan
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you use Windows Media Center on the Xbox 360 DVD have not given chapter.

  After finally finding many questions I have my Xbox Media Extender and running upward and only this question left.

  I'm ripping my DVD to single file .vob she seems to like and plays very well, but it is only with the file movie and nothing else in the record.  How the XBOX sees it, the bed and he plays very well.  However I have no control outside the break and if I restart it takes over the job.

  Now if I rip my DVD with the .bup .ifo files in this folder the XBOX instantly he shoots in the list of the DVD and it will not play.

  When I use Windows Media Center on my PC it preforms even when the film is in the folder.  Then when I add bup and ifo data I can still play, but he has all data in the chapter that I need.  Shows all the chapters, allows me to jump as I please.

  How can I get my XBOX to behave like my PC?  I have to remove these 4 files in/out of the folder to see pop in and out of my list of XBOX.  How can I get the XBOX to validate data, so my movies actually have chapters and ignore the controls?

  Thank you

  Chris

  Hello, wilsman00

  As mentioned, by changing the VOB files, the data in the chapter are probably damaged. This can be confirmed by putting in a retail DVD in the drive and play directly from the DVD.

• Why is media center saying my dvd, s are not this country? they were purchased in the United Kingdom.

  I keep trying to play the dvd in my media center player, but a flag goes up to to say that they play in this country. I bought them to the United Kingdom!

  DVD is encoded with a "Region DVD". To check what you responds to go into Device Manager, select the DVD drive and check in system properties. License only 4 changes, so be very careful.

• How can I burn a DVD in Windows Media Center with the closed captioning information included?

  I recorded a program in Windows media center.  When I read the program, it displays the closed captioning information.  If I burn a DVD program closed captioning information do not display during playback.  How can I burn the DVD to include captioning?

  Hello
   
   
  1. How do you try to burn the DVD? You have saved the DVD on the desktop (hard drive) or you burnt before you save it to a DVD?
  2. after are burning the DVDs in which application you trying to play?
  
  I suspect that the captions are already burned in DVD, at this point in time we can cross check if the option is set to display captions.
  To enable or disable subtitles for DVD
  a. on the Windows Media Center start screen, navigate to tasks, click settings, click DVD and then click subtitle.
  b. click the plus (+) and minus (-) buttons to select power off or when cut, and then click Save.
   
  For more information, refer to the article below.
  Show captions or subtitles in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/Show-closed-captions-or-subtitles-in-Windows-Media-Center
  See also the belowl link:
  http://Windows.Microsoft.com/en-us/Windows7/turn-on-full-screen-mode-and-closed-captions-in-videos-on-the-Windows-website
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.