Media Center closes the program unable to resolve internet tv, etc.

Similar Questions

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Media Center has stopped working a problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  Computer: Vista Home Edition Premium, SP2

  My media center of windows worked fine two days ago, but since yesterday, it crashes when I try and run it with the statement "Media Center has stopped working a problem caused the program blocking works correctly." Windows will close the program and notify you if a solution is available. »

  I tried to go back to an older restore point, I tried to pick up the .db file, I've seen people say to delete, but I don't even have that.

  This is the error in the event log

  Log name: Application
  Source: Microsoft-Windows-search
  Date: 2011-08-09 16:49:45
  Event ID: 3084
  Task category: Gatherer
  Level: error
  Keywords: Classic
  User: n/a
  Computer: rb - CCP
  Description:
  Cannot load the Search.MediaCenterHandler.1 protocol handler. Error description: a server error has occurred. Verify that the server is available.  .

  The event XML:
  
   
     
      3084
      0
      2
      3
      0
      0 x 80000000000000
     
      380048
     
     
      Application
      RB - CCP
     
   
   
     
     
      Search.MediaCenterHandler.1
      A server error occurred. Verify that the server is available.
   
  

  Hello

  I suggest you follow the methods and check if it helps.

  Follow the steps below and check if it helps.

  (a) exit any running instance of Windows Media Center.

  (b) delete the mediaCenterDataStore.db file. By default, this file is located in the following location:

  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB

  To remove the file, follow these steps:

  i. Click Start and then click Run.

  II. in the Open box, type run and then click OK

  If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  III. in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.

  IV. in the details, click pane right mediacenterdatastore.db and then click on remove.

  c. click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.

  (c) start Windows Media Center.

  I hope this helps.

• My Windows Media Center Download the latest TV programming guide

  With the help of Win 7 Home Prem SP1 64-bit.

  Suddenly, Windows Media Center Download the latest TV programming guide.  It worked fine, then all of a sudden it stopped.  WMC wonder if I want to download the latest Guide Listing.  I click on the download option, then he said: 'Guide lists have been downloaded successfully. Yet, when I go into my program Guide for all the different TV channels (everywhere in the air, no cable or satellite) it says "No data available" in other words not it offers for download, guide, said that he never actually makes the fact.

  I don't know how or why this happened. I tried to download the application manually Guide by going to tasks-> settings-> TV etc and it does the same thing. It says "Guide Listings were downloaded successfully" but nothing.

  How to fix?

  PS my TV tuner and everything works fine. My internet connection is perfect. Am really confused.

  Re-run the installation of the TV, try a different zip code and then switch back to your own if this does not work
  Thanks for posting https://connect.microsoft.com/site1145
  You must include your provider name and postal code

  Note: You may need to REGISTER to create an account, then sign in to see the feedback on the left link.

• Media Player error "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available.

  Hello

  Whenever I try to play something or burn something using Media Player, I get a message.  "A problem caused blocking the program works correctly.  Windows will close the program and notify you if a solution is available.

  Help

  Jason

  No worries, go to the start screen and find the Green store icon.  When you open it will let you know if the update is available.

• Media Center of the video window - serious on dvd has audio/video desynchronization

  Whenever I try to burn recorded videos on a dvd using Windows Media Center, the video and audio are always synchronized when DVDs are read. I tried several times and still the same problem experiece. I have no problem with any aspect of the Media Center and all other DVDs play fine on my PC, so I guess that something goes wrong during the burn process.

  Any ideas what can cause this problem and how to fix it?

  Hello
   
  Thank you for visiting Microsoft Answers.

  Could you please let us know how you try to burn to dvd?
  You use any 3rd party dvd burning software?

  There is possibility that this problem can be caused because of the drivers.
  I suggest you to update the drivers for the video, sound and TV tuners adapters and verify.
  Steps to uninstall the sound, Tuner and video drivers.
  NOTE: You will need to do one thing at a time.
  Uninstall and reinstall the drivers on the computer.
  1. open the programs and features.
  2. check if the device driver is listed.
  If this is the case, then right click on the device that is listed and click on uninstall, then Yes to confirm.
  NOTE: Sometimes you will get a notice to restart the computer to finish uninstalling the driver. If you do, then click Yes to restart the computer when you are prompted.
  3. close the programs and features.
   
  Uninstall using Device Manager
  1. open the control panel (Classic view).
  2. click on the Device Manager icon.
  3. click on continue for UAC prompt.
  4. click on the + sign next to the device you want to uninstall to develop.
  5. right click on the listed device, and then click Properties.
  NOTE: You can also click on uninstall
  6. If you want to uninstall the device-
  NOTE: This doesn't uninstall the device and let the device driver installed for the device.
  (A) uncheck the button remove the software driver of this box of the device.
  NOTE: If you do not have this option, then only the device is uninstalled.
  (B) click OK.
  NOTE: Sometimes, you may be asked to restart the computer to finish uninstalling the driver. If you do, then click Yes to restart the computer.
  7. close Device Manager, and then restart the computer. Uninstall and reinstall the back of the computer.
   
  Alternatively, you can try to perform the scan of the file system [SFC] checker on the computer.
  1. click on the Start button
  2. on the Start Menu, click all programs followed by accessories
  3. in the menu accessories, right-click on command line option
  4. in the drop-down menu that appears, click the "Run as Administrator" option
  5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
  6. in the command prompt window, type: sfc/scannow then press enter
  7. a message is displayed to indicate that "the analysis of the system will start.
  8. be patient because the analysis may take some time
  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
  11 after the scan finished, close the command prompt window reboot the computer and check.

  If you have installed any 3rd codec part on the computer, try to uninstall and reinstall and check.

  It will be useful.
   
  Kind regards

  Niranjan
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Media Center blocks all programs start - HELP - green buttons everywhere

  Hello

  I have a laptop Acer Windows 7 (new) / and Office XP - Office 7 free trial ran out. Anyway, I can't open any programs on my computer since the implementation of Media Center.

  Last night, I downloaded from CNET programs, including the FreeZonlineTV and a few others. I remember during Setup, Media Center was downloading something that took a long time - I thought that it was creating a library or something - it was late - sorry. In any case, this morning the download is complete, I have a bunch of little green buttons on all my programs on the desktop (shortcuts). I also have this same green button on everything in my Start menu, (i.e., Skype, ITunes, MRI, Internet Explorer, Microsoft Word, Mozilla Firefox, etc.) When I click on any of them, the media goes full screen. It does not actually close. It is now in my taskbar - I can't minimize it - it appears full screen again when I try. I decreased the size of the window now, and there's just on the side of my desk.

  I tried Ctrl/Alt/Del and ending the Media Center, but it just POPs right up again. I tried to delete or disable Media Center, but when I'm in the section of the control panel I need to disable to turn it off, media center pop up and don't let not even get me in the section where I can check or uncheck something.

  I can not restore - media center stop the it. I. Please help - I can't even open word documents - this is urgent. Oh, it also disabled by AVG and other antivirus programs so I can't even scan. I ran Advance care system and did a diagnostic scan - found defrag required - done - but, when I tried to get into other programs on Advance care system, guess what - a bunch of little green buttons on all of these programs as well.

  Any help would be appreciated!

  Thank you

  NOT a Moment another, Blonde

  Hello

  Try a clean boot and see if it helps.
  http://support.Microsoft.com/default.aspx/KB/331796?p=1

  Soon :)

• How to fix the windows live mail has stopped working a problem caused the program to stop working correctly windows will close the program and notify you if a solution is available

  In the Middle looking emails from this error appears.  Windows live mail has stopped working a problem caused the program blocking works windows will close the program and notify you if a solution is available

  Hello

  1. do you remember make changes to your computer before this problem?

  Try to start the computer in a clean boot and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

  If the boot fails, you can post your questions about Windows Live Solution Center by clicking on this link: http://windowslivehelp.com/product.aspx?productid=15

• Can I watch a show that is currently recording in Windows Media Center since the beginning of this show?

  I use Windows Media Center to record TV shows.  Suppose I record a show in an hour at 6:00, and I decide to 06:10 I want to watch this show from the beginning. (while it's recording)

  Is it possible to do this in Windows Media Center?  The media file of the recording of the show is not accessible until it is 100% finished recording.

  I am looking for a way to watch a show while it's recording, but to do so since the beginning of the show (after the start of recording)

  Thank you

  Hello

  Im sure that you can watch TV recordings during live TV recording, but you can't watch a program during its course of recording.

  See also:

  This management recorded TV in Windows Media Center: frequently asked questions

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

• Why do I get windows error message direct Library closed unexpectedly when I close the program?

  When I use windows live photo gallery to display an image and then close the program I get Windows Live messages Library closed unexpectedly.

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• I get a pop up window that says: "a problem causing the stoppage of work of the program. Windows will close the program and notify you if a solution is available.

  Original title: window problem

  How can I get rid of window that States "causing problem program to stop working. Windows will close the program and notify you if a solution is available"when he was actually without any problem?

  I do not have this message before I had another and removed advice Advisor total care and the problem resolved. Thank you for taking the time to help.

  Al Ashton

• Windows Media Center, says "the disk is full delete content or change the area of sotrage.

  Windows Media Center, says "the disk is full delete content or change the area of sotrage.

  What should I do? I don't think it's completely just a mistake, where us the files and I is not even saving programs!

  WMC stores the file in the Public TV folder saved on your hard drive by default, it is located at C:\Users\Public\Recorded TV.

  Check how much space is there.

• Media Center of the Signal course to record live tv & regular VISTA

  RE: Windows Media Center signal loss

  I started getting errors while recording in Windows Media Center, the program hangs and fails to save and I get the error message of signal loss.

  I checked my connections USB, card TV tuner, cable connection, and they are very good.  I use Wintv 7 now and record very well. I have WINTV7.1 for the HAUPPAUGE WINTV HVR - 850 external USB connected to the tv by similar cable card. I searched various sites of Mircrosoft support and not been able to find a solution or explanation satisfatory.

  However I have my search I found possible solutions. These solutions involve Windows Media Center for Windows 7 and I want to know if they will work for VISTA sp2.  The Hauppauge site displays links for Windows 7.

  Support site for Win Tv 7, Hauppauge hvr850;

  http://www.Hauppauge.com/site/support/support_hvr850.html

  http://www.Hauppauge.com/site/support/MCE_update.html

  Microsoft support site (I think that is the difficulty that would help me better);

  "Fixed in this update

  On a computer that is running Windows 7, you use Windows Media Center with a TV tuner analog Watch analog TV live. In this case, you receive messages from overlay low intermittent flow in Windows Media Center.

  Windows Media Center monitor the inflow of over-the-air television. Without this follow-up, the bit rate very low fall when the analog input of the TV is low or does not have a signal. This causes a black screen or a static screen. With this follow-up, Windows Media Center displays a message of overlay to indicate a possible problem with the inflow during the analog input of the TV is low or does not have a signal.

  However, the method that is used to monitor the inflow on analog signals is too sensitive. This may cause a false alarm of a low flow.

  Note Several regions have switched over to digital broadcasting. There are hardware configurations in digital programs to convert the digital signal into an analog signal. "These configurations can include set-top boxes and digital-analog-switch-boxes".

  Difficulty 981130 quote:

  http://support.Microsoft.com/kb/981130

  -------------------------------------------------------------------------------

  2nd possible solution from Microsoft Support;

  An update is available for Windows Media Center in Windows 7. This update corrects a blocking problem that occurs when you use a TV tuner in Windows Media Center. When this problem occurs, you may experience one of the following symptoms:

  • You receive an error message similar to the following, when there is no conflict apparent tuner:
    Conflict of tuner
  • You receive an error message similar to the following when there is available tuners:
    No tuner available to meet the current demand
  • The Windows Media Center Receiver Service (Ehrecvr.exe) stops responding and you have to restart the computer to recover this service. »

  Quote from Micorsoft difficulty 981129

  http://support.Microsoft.com/kb/981129

  I did this as detailed as possible to help others with similar problems.

  I believe that Micorsoft hotfix support kb 981130 will solve my problem with loss of signal and gel of the records.   But the solution is designed for windows 7 and there is no information on the page for Windows Vista.

  Summation:

  Problem: Loss of signal and inability to record in Windows Media Center Vista

  Material: Hauppauge Wintv HVR - 850 with software wintv7 and drivers updated.

  Q 1 the solutions above Ko 98130 will work for Windows Vista Media Center?

  Q 2 is there a solution similar to 981130 available KB?

  Are Q 3 there other possible solutions for the loss of signal in Windows Media Center in Vista?

  Thanks for your help, I hope you can answer quickly.

  Richard

  Hello, Richard

  Do you still have the same problem after performing the steps that was you on the list?

  If so, you can try to run a SFC scan to make sure that the system files are intact: How to use the tool File Checker system to troubleshoot missing or corrupted system files on Windows Vista or Windows 7

  The only other option I can think is that the signal is in fact weak and therefore, the signal is lost.

  Assuming that the signal strength is good and the System File Checker was not working, the next step that I have to recommend would be to back up your files on an external and reinstall Windows:

  Install, reinstall, or uninstall Windows
  Back up your files

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• crashing Windows media center at the start of video library

  Whenever I go to the video library in Windows Media Center, I receive a report appcrash. (I have 1200 videos added in a directory)

  Windows 7 SP1 32 bit
  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-crash-when-starting-video/f117f6da-3283-E011-9b4b-68b599b31bf5

  HI player67,

  I suggest you follow the steps below

  Method: 1

  Enable and disable Windows Media Center. To do this, follow the steps below:

  a. Click Start, click Control Panel and then double-click programs and features.

  b. click on Turn Windows Features on or off.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. extend the functionality of media

  d. turn off Windows Media Center of the box, and then click ok

  e. follow the same steps as above, this time place a check mark against the Windows Media Center box

  f. click Ok, and then restart the computer

  Method: 2

  Perform a check of the system files; read the following article to run the System File Check

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

• I get say error message "an error has caused Photoshop to stop working correctly. Windows will close the program and notify you if a solution is not available "." I got no notification. My old Photoshop CS5 works fine, but as I'm paying for CC2014

  I get say error message "an error has caused Photoshop to stop working correctly. Windows will close the program and notify you if a solution is not available "." I got no notification. My old Photoshop CS5 works fine, but as I pay for CC2014 I would use it. I tried to rename the "sniffer" to "snifferold" as bobmiller4002 has suggested, but the problem is not resolved. Lightroom works fine.

  Update your driver from the website of the manufacturer of the GPU video card to pick up the bug fixes that you are missing...