Media Center of the Signal course to record live tv & regular VISTA

Similar Questions

• Can I watch a show that is currently recording in Windows Media Center since the beginning of this show?

  I use Windows Media Center to record TV shows.  Suppose I record a show in an hour at 6:00, and I decide to 06:10 I want to watch this show from the beginning. (while it's recording)

  Is it possible to do this in Windows Media Center?  The media file of the recording of the show is not accessible until it is 100% finished recording.

  I am looking for a way to watch a show while it's recording, but to do so since the beginning of the show (after the start of recording)

  Thank you

  Hello

  Im sure that you can watch TV recordings during live TV recording, but you can't watch a program during its course of recording.

  See also:

  This management recorded TV in Windows Media Center: frequently asked questions

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

• When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

  I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

  screen A___
  WMC has discovered the following:
  Analog cable (1 Tuner)

  Other tuners or TV signals were detected but will not be configured.
  (Show details)

  Is this Setup correct and complete?
  o Yes, configure TV with these results
  o no, show more options
  ________________
  When I click on show details, it is said:

  screen B___
  No TV Signal
  If a TV signal should be present, check your signal for following tuners connections and try again:
  Hauppauge WinTV 418 BDA Tuner
  ________________
  There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

  When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

  I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

  I would really appreciate any help and if more details are required, please let me know.  Thank you!

  -Doug

  I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

• Download pirated Windows XP Media Center with the genuine key?

  Hi all

  First of all, I apologize if the thread, I created is in the wrong place (Technet forums), but I got enough good help from technet on a Windows 7 problem, that I had. I've recently updated to the Genuine Windows XP Media Center to a genuine Windows 7 Professional.

  I own a HP pavilion laptop came pre-loaded with XP MC (media center). Now, HP does not record with the laptop, instead, there is a recovery partition which can be transferred to DVD to create additional space on the HARD drive, I did. Unfortunately my DVD player no longer works, and I can not restore my XP to factory settings (new facility) because the HP restore software only reads from the DVD.

  This XP has become bloated over time, and I want to do a new installation.

  It is, I could download a pirated copy of the media center XP SP3 and use my real serial number and / or additional information to activate it?

  Thank you

  No, because your key is specific to an HP facility.
  Replace your DVD player or buy an external hard drive

• Windows Media Center, says "the disk is full delete content or change the area of sotrage.

  Windows Media Center, says "the disk is full delete content or change the area of sotrage.

  What should I do? I don't think it's completely just a mistake, where us the files and I is not even saving programs!

  WMC stores the file in the Public TV folder saved on your hard drive by default, it is located at C:\Users\Public\Recorded TV.

  Check how much space is there.

• Window Media Center, error code:-2146959355, could not record show. Live TV does not work. Help?

  Hello

  I'm having a problem with my Windows Media Center. It worked perfectly without any problem since I built the computer more than 6 months ago. I have not changed anything, the only thing I've done recently is set up a homegroup on my local network using this computer. Except that nothing has changed.
  A show is set to record every time, I get the error code. Also, I can't watch live TV. Help, please!
  Thank you.

  Check the event viewer.
  http://Windows.Microsoft.com/en-in/Windows-Vista/open-Event-Viewer

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again.

• Media Center closes the program unable to resolve internet tv, etc.

  I tried so many different attempts to get a FIX please help

  Have what methods you tried?

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again.

• Xbox 360 scan windows media center for the new music?

  I just added some new music to my windows media center and the music does not appear on my xbox 360. is there a way to synchronize?

  Hi nwills,

  Ideally, the Xbox 360 should automatically scan if new music is added to Windows Media Center. However, you can also manually synchronize as follows.

  a: you can connect the Xbox. The Xbox Dashboard, select 'My Xbox', then select 'Windows Media Center' to receive the eight-digit code. This code allows your Xbox to recognize your media player on your computer.

  b. you can set up Windows Media Center on your PC. Click on the "tasks" and select "Add Extender". A screen will appear asking you to enter the eight digit of your Xbox 360 code.

  c. play music on your Xbox. Select 'Windows Media Center' in the menu 'My Xbox' and start playing music.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Windows Media Center Download the latest TV programming guide

  With the help of Win 7 Home Prem SP1 64-bit.

  Suddenly, Windows Media Center Download the latest TV programming guide.  It worked fine, then all of a sudden it stopped.  WMC wonder if I want to download the latest Guide Listing.  I click on the download option, then he said: 'Guide lists have been downloaded successfully. Yet, when I go into my program Guide for all the different TV channels (everywhere in the air, no cable or satellite) it says "No data available" in other words not it offers for download, guide, said that he never actually makes the fact.

  I don't know how or why this happened. I tried to download the application manually Guide by going to tasks-> settings-> TV etc and it does the same thing. It says "Guide Listings were downloaded successfully" but nothing.

  How to fix?

  PS my TV tuner and everything works fine. My internet connection is perfect. Am really confused.

  Re-run the installation of the TV, try a different zip code and then switch back to your own if this does not work
  Thanks for posting https://connect.microsoft.com/site1145
  You must include your provider name and postal code

  Note: You may need to REGISTER to create an account, then sign in to see the feedback on the left link.

• How to watch Internet TV for Windows Media Center to the Japan?

  Hello

  Is it possible to watch Internet TV for Windows Media Center to the Japan or watch television show or movies without TV tuner and cable?

  I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.

  My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.

  I still believe that Internet TV is supported in the Japan.

  You have an idea for this troubleshooting?

  Please help me.

  Thank you

  Monday, December 29, 2014 08:36 + 0000, avocado0227 wrote:
   
  > Can we watch Internet TV for Windows Media Center to the Japan or watching television or movies without TV tuner and cable show?
  >>
  >>
  >>
  > I live in the Japan and use PCs running Windows 7 Enterprise 64-bit.
  >>
  >>
  >>
  > My Windows Media Center does not show TV on the internet, so I goggled for this solution, but I have some information and tried the procedures which have set similar problems, but still do not work.
  >>
  >>
  >>
  > I still think that Internet TV is supported in the Japan.
   
   
  Microsoft has removed completely support Internet TV in September 2012.
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• crashing Windows media center at the start of video library

  Whenever I go to the video library in Windows Media Center, I receive a report appcrash. (I have 1200 videos added in a directory)

  Windows 7 SP1 32 bit
  Thank you

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Media-Center-crash-when-starting-video/f117f6da-3283-E011-9b4b-68b599b31bf5

  HI player67,

  I suggest you follow the steps below

  Method: 1

  Enable and disable Windows Media Center. To do this, follow the steps below:

  a. Click Start, click Control Panel and then double-click programs and features.

  b. click on Turn Windows Features on or off.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. extend the functionality of media

  d. turn off Windows Media Center of the box, and then click ok

  e. follow the same steps as above, this time place a check mark against the Windows Media Center box

  f. click Ok, and then restart the computer

  Method: 2

  Perform a check of the system files; read the following article to run the System File Check

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

• Windows 7 "Windows Media Center" in the TV recording settings that represent the quality settings? That is to say: better = 1080 p?

  When RECORDING LIVE TV using Windows 7 "Microsoft Media Center" there are quality parameters. The parameters are "better, better, good or fair.

  On the BEST configuration, I can barely hold 118 min disk 240 min. What are the different settings in ppi? That is to say: better = 1080 p?
  http://blogs.technet.com/b/Security/Archive/2007/06/05/building-my-Windows-Vista-Media-Center-VMC-part-2-the-tuner.aspx
  has some info. the parameters on compression, no resolution.
   
  you will not get any high definition without a cable card and broadcast more 720.
   
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• Window Media Center! 10 GB for TV-record 30 minutes! Go Microsoft!

  As I said in the title, I usually record TV shows so I can watch them after school, then all of a sudden one day I discovered my hard drive was full... I tried to find the problem and found out it was the "recorded tv" folder which is sh * ting my storage. I take a look at the properties and shocks, each tv 30mins record contains 10 GB or more! Go! It is simply not true! No idea how I change it or compress the vid or just convert a .wtv for any folder that's NOT going to s * ck my hard drive! PLEASE...

  For ISDN (the Japan Broadcasting System), I don't know.  But brushing up on the specs, I can see why the size of your file is so huge - the bit rate is, well, pretty high (but, this picture has got to be so pretty!)  With a rate of 51 MB/s per channel, it'll do for some large files in a hurry.
  Here in the United States, ATSC (our over-the-air signal level) has a total ~19.4Mb/s rate (amount of signals of a station - up to 5 programs of the station).  Therefore, smaller file sizes.  (Cable is as a result, most of the time.)

  Why MC just write the bitstream (remember: the signal is already digital, and in a format that it understands) to disc and gives no possibility (at least here) of re - encode a smaller size?  Because it would take considerable processing power to do and would get more heavy you want to compress, or tuners more your are running.
  Is it possible to put MC to compress the signal?  For you, I don't know (but I guess that the answer will be 'no', just as it is here for digital signals.)

  For now, the best advice I can think of for you to get a more concrete answer would be to re - ask the thegreenbutton.com wire (it is recommended that post in the Windows 7 folder in the world).  There are some (not too many, I think; but a few) users to your part of the world who might be able to shed light on it a little more for you.

  Oh, and: I'm sorry for the price of HARD drive.  That sucks.  :(

  HTH,
  Chris

  MS - MVP (Media Center) [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• When you use Windows Media Center on the Xbox 360 DVD have not given chapter.

  After finally finding many questions I have my Xbox Media Extender and running upward and only this question left.

  I'm ripping my DVD to single file .vob she seems to like and plays very well, but it is only with the file movie and nothing else in the record.  How the XBOX sees it, the bed and he plays very well.  However I have no control outside the break and if I restart it takes over the job.

  Now if I rip my DVD with the .bup .ifo files in this folder the XBOX instantly he shoots in the list of the DVD and it will not play.

  When I use Windows Media Center on my PC it preforms even when the film is in the folder.  Then when I add bup and ifo data I can still play, but he has all data in the chapter that I need.  Shows all the chapters, allows me to jump as I please.

  How can I get my XBOX to behave like my PC?  I have to remove these 4 files in/out of the folder to see pop in and out of my list of XBOX.  How can I get the XBOX to validate data, so my movies actually have chapters and ignore the controls?

  Thank you

  Chris

  Hello, wilsman00

  As mentioned, by changing the VOB files, the data in the chapter are probably damaged. This can be confirmed by putting in a retail DVD in the drive and play directly from the DVD.

• Blue screen when you perform the search for live TV in Windows Media Center on the new Lenovo A700

  I just got my new Lenovo IdeaCenter A700 yesterday and have been busy setting up.  The computer is equipped with a built-in TV Tuner and I tried to put in place the TV on it so I could watch TV on my computer.  I have RCN for cable and a cable TV that gets first plugged into the decoder and then I plug the cable to the TV - so I just plugged this cable on my computer instead of the TV.

  I used the following Web site to set up using Windows Media Center - http://www.howtogeek.com/howto/9166/learning-windows-7-setup-live-tv-in-windows-media-center/.  After that I put in my zip code he sought the power of the signal or something and then I got a blue screen.  To restart the computer the information below has been MS. error message This happened to me twice.

  Anyone know how to fix this? Or otherwise, I just want to use my computer to watch TV on, and if I can do this other method other than Windows Media Center free I am happy to do.

  Please let me know if you need more information.

  ************

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 4A
  BCP1: 0000000076E5FF2A
  BCP2: 0000000000000002
  BCP3: 0000000000000000
  BCP4: FFFFF8800AADECA0
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\102110-15849-01.dmp
  C:\Users\fennis\AppData\Local\Temp\WER-36941-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\System32\en-US\erofflps.txt

  This seems to be resolved now... it was maybe an update of windows, like when I rebooted my machine it updated automatically and after that he worked all of a sudden!

  Anyway, now it shows a black screen and no sound for all channels, but that is a different problem... and I'll look in to that.

  Thanks for your help.