DMS window closed right after opening

Similar Questions

• iCal leaves right after opening

  Calendar stops within 10 seconds of the opening of each time.

  I tried the things:

  Calendar of opening with disabled internet

  Deleting the cache files of the calendar in the library folder

  I have OS X El Capitan 10.11.5

  Any suggestions or previous corrections that would work?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Step 1

  For this step, the title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  In the upper right corner of the Console window, there is a search box to filter. Enter the name of the application crashed or process. For example, if Safari has crashed, you would enter "Safari" (without the quotes).

  Each message in the journal begins with the date and time when it was entered. Select the messages since the time of the last fall, as appropriate. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  Step 2

  In the Console window, clear the search box, and then select

  DIAGNOSIS AND diagnostic USE information reports ▹ user

  (not diagnose them and use Messages) in the list of logs on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports of incidents. The name of each report begins with the name of the process and ends with ".crash". Select the most recent report on the process in question. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway. If the report is only a few lines, make sure that you have disabled the search box.

  If you don't see any report, but you know, he had an accident, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report - they are very long and rarely useful.

  When you post the journal excerpt or the accident report, you might see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• What is the red button on the far right after "open menu"?

  The button is red fixed. Hovering above it shows no info. Clicking on it produces a sound similar to empty the trash. I tried to add an image of ping wink, but the wheel just kept spinning, and it's never over.

  Uninstalling Firefox does nothing with the profile folder where extensions and user data are stored. When you reinstall Firefox everything is there, who was there before you uninstall Firefox - it has not been deleted during the uninstall of Firefox.

  Open your add-ons Manager and remove this extension of "Organization of red button!
  https://support.Mozilla.org/en-us/KB/disable-or-remove-add-ons#w_how-to-remove-extensions-and-themes

• Compaq V6000 closing right after button walk / stop is pressed.

  The laptop turns on and turns off 2 seconds after you press the power button. Any ideas what is wrong. It was working fine the day before and the next morning is then when this started.

  Thank you very much for the information on this problem. It was really very useful.

• Download Windows download window disappears (pop up window closes) right after it starts

  Windows 7.1, 32-bit system (space 17Gig): when I click on "Get Windows 10" icon, the pop-up lists 2 options, "Update now" or "Start Download, upgrade later."  When I click on each choice, starts the download 'start' but then the pop-up window disappears (farm).  How can I get the update of Windows 10 then?

  Update manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Where is the patch to activate CS5 to work on a Mac w / ElCapitan? Someone at - it a? You know, quit after opening, inability to update, issues that have been around for many years. I am a teacher and can NOT afford an upgrade. Help, please.

  Applications leave right after opening, cannot be updated. Yes, tried on each option on many forums. Easy to follow instructions or a GOOD prosaic site?

  You have JAVA SE 6?

  Download Java SE 6 Direct:

  http://support.Apple.com/kb/DL1572

  CS5 is legacy software. He was never certified to run on El Capitan. It might work, but again, he could not.

  The last update for CS5 is released in 2011 in support of the browser lab.  But the lab browser servers have been offline in 2012. There are more.   For what it's worth, the link for updates can be found below, but I don't think it will be very useful for you.

  Adobe - Dreamweaver Support Center: Updaters

  Students & qualified teacher can go down the creative cloud 60 percent Plan.

  Students & teachers

  Nancy

• After opening closed, be prompted to install the update.

  After opening closed, be prompted to install the update.  Accepted the request of updates install, still continue to receive demand updates install on each request to stop.

  Hi DTIRDT,
   
  Thanks for posting on the Microsoft Forums.
   
  First, I suggest to install all updates manually by running the Windows updates and check if all updates are installed.
  Once installed try turn off the computer and check if you are always faced with the question, if so post back so that we can help you further.
   
  It is best to install the updates when the computer is running.
   
  I hope this helps.
   
  Best regards, Niranjan | Microsoft Answers Support Engineer

• When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  Hello

  Let us try these methods and check if that helps.

  Method 1.

  You can try the last good known Configuration and check if that helps.

  Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration

  Method 2.

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• I had windows 7 and it has been updated to windows 10. After the update, I opened a PDF with adobe reader. The sign economy is idle. When I click on save slot, it is said that he can save a blank document. Earlier, I have not any problem to save a pdf d

  I had windows 7 and it has been updated to windows 10. After the update, I opened a PDF with adobe reader. The sign economy is idle. When I click on save slot, it is said that he can save a blank document. Earlier, I have not a problem to save a pdf document with adobe reader on my hard drive. I found no updates available for my adobe reader software. Is adobe still to make the drive compatible with windows 10?

  Govind B S

  Bernd, these rights are not necessary to the reader XI. Unless the file has been secured, then it should be savable.

  I recommend that upgrade you to the latest version of the XI player that is available and if this does not work, try to run a repair installation (or upgrade to DC).

• After installing the Windows SP3 does not open.

  I have a laptop Sony Vio running Windows XP Home Edition. Last week I tried to update from SP2 to SP3. After about 2 hours, it was at the point of file cleanup. After a time to shout a message came uo 'Please Wait'. I waited all night, and the message was always there in the morning. I restarted the computer and now Windows wilol is not open. He turns the splash screen and then the screen turns blank ever opening in the icon screen. When I try to start safe mode it runs a number of lines if information and where he had reached the end of one line info nothing happens. I tried to boot in a security 3 with the same resunts mode. Tried running in the final Condition to work with the same results - Windows startup screen runs then screen turns white and screen icon never opens. I have makes the system, Application and Driver Recovery CD. That SP3 could have done to create this condition? No idea how to fix ths situation without losing me any files - images Woed docs etc.? Any help would be greatly appreicated.

  At this point, your main goal should be to backup all your files from user data that you can from your [no bootable] machine.  I find that a good way to do it is to this is to use another machine to create free Linux Livecd such as Knoppix or Ubuntu (if you use Ubuntu, do not install but use instead "Try Me").  You do this by downloading an .iso file and then use the "burn image" of your program of CD burning to create the bootable CD/DVD.  You can now start your laptop from this CD and Linux will allow that access you your hard disk without disturbing anything on this subject.  You can then copy off and back up your data on a USB stick or a network drive files.

  Once your files are safely backed up, you can then reinstall Windows using the recovery disks you have.

  Knoppix: http://www.knopper.net/knoppix/index-en.html>
  Ubuntu: <> http://www.ubuntu.com/download/ubuntu/download >

  Recovery CD Windows are also a possibility but more effort involved to create the CD.  Such a disc is "BartPE".

  BartPE: <> http://www.nu2.nu/pebuilder/ >

  HTH,
  JW

• When windows update, the restart may end, it says please wait and won't restart unless I closed it and open it in safe mode, what can I do?

  When windows update, the restart may end, it says please wait and do not restart unless I closed it and open it in safe mode, what can I do?

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  If the problem continues to repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Of Mini Windows taskbar disappear after closing one - boring!

  When I have several emails open outlook and I want to quickly close a whole bunch of them I want to be able to close the mini window.  However after the closure of each of them by clicking on the red x, the set of mini windows disappears and I have to move the mouse down to the button of the taskbar for the mini windows reappear and then I can close one that follows and then repeat again and again.  It is very annoying when you have a dozen or so open emails.   How can I make other minis windows stay on the screen, so I can just click each red x one by one, without returning to the task between the two bar button?  It would be so much faster.

  Thank you

  Hello

  ·         What is this happens only with windows Outlook?

  Step 1:

  Open multiple Internet Explorer Windows, and then try to close them by using Windows Ridge previews.

  Step 2:

  Try restarting in a clean boot to see if you are able to close previews without collapsing the list every time.

  http://support.Microsoft.com/kb/929135/en-us

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click on restart.

• Shell Windows 10 (right button) on directories extension hangs after installing Acrobat Reader

  Shell Windows 10 (right button) on directories extension hangs after the installation of Acrobat Reader. Anyone know the cause?

  Finally, the main cause of this problem has been to Google Chrome. The problem has been resolved after historic cleaning and reset Chrome settings.

• After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10

  After opening a PDF file in Acrobat 9 Pro, I get error "Suite Product Activation necessary...". ', this after last update of Windows 10 - what is a solution?

  Hi patsyf58769691,

  Acrobat 9 is not compatible with Windows 10, but give it a try error "Serial number." incorrect Acrobat 9 | CS4.

  Kind regards
  Nicos

• Standard Adobe acrobat 8 closing just after I open it.

  Today, for the first time, my adobe acrobat 8 standard (version 8.3.1) Presentation ends in 5 seconds about to open up or after opening a PDF file for viewing.  How can I fix?

  Hi JJSMITH,.

  Could you please let me know what version of the operating system that you use. Is it compatible with version Acrobat 8 standard?

  There might be a problem with the license, then you could try the following:

  • Run the license repair tool Adobe - Adobe licensing repair tool and restart the machine to check if you still face the question.
  • Try all the steps mentioned in this KB doc link: error: "License has stopped working". Windows

  Let me know if it helps.

  Kind regards

  Ana Maria