DMZ Design - DMZ <>- NAT internal

Hi all

I would like to get opinions on the question of whether what follows adds really any additional security.

We have a public facing firewall and internal network. I create a DMZ to host some public facing Web servers. Im going to NAT public IP addresses in the private address DMZ. My question is if you think it is a good idea also NAT on the DMZ (private) in a (private) address on our internal network. The idea being the real addresses of the DMZ servers would not routable on our internal network and internal clients could connect only to the internal NAT address of DMZ servers. As far I understand it, this adds a layer of complexity, but not necessarily security. Euther way I need to be filtering traffic in both directions for DMZ <->internal. (and of course <->outside DMZ).

What would you do?

Appreciate your help

Andy

Andy

Don't know what you get by doing this. Even if real private addresses in the DMZ servers were not routable addresses Natted should be for internal users to access the servers in the DMZ, if indeed they must. And if they do not want to then just don't advertise the route to your internal network.

I agree with you, because I don't see any additional security benefit with additional complexity. I wouldn't do it myself.

Jon

Tags: Cisco Security

Similar Questions

  • PIX 515E DMZ NAT

    We have recently acquired a new partner that is connected by a frame relay to our DMZ.

    Here's my problem. The router (frame relay) is in our DMZ their public addresses to our addresses in the DMZ to NATS

    172.16.10.90 ftp port

    172.16.10.4 port 9100

    172.16.10.5 port 9100

    172.16.10.6 port 9100

    I want to take the source address and the NAT inside our network:

    10.10.2.90

    10.10.2.4

    10.10.2.5

    10.10.2.6

    I don't have physical devices in the DMZ for these addresses and I have not been able pass traffic back from the demilitarized zone. I have access lists allowing traffic to DMZ 172.16.10.x inside the 10.10.2.x via the appropriate ports.

    Currently, we have our Web server and a mail gateway in the demilitarized zone, I want to do this without changing the overall or to compromise the DMZ rules that are currently in place.

    Thank you for your help

    This feature is available in 6.3 + codes

    upgrade to the latest code what 6.3.4

  • DMZ and internal on the same host

    So I have an ESXi 5 host with 4 natachasery (it is a test area) in courses run 4 comments and I wanted to configure 1 Teddy to a demilitarized zone. When I put a vSwitch, the VMkernel default gateway is already point to my internal gateway while the demilitarized zone has a different IP address for the gateway. Is it possible to set up a second default gateway to use for the DMZ network and how it is? Again, this is only a test area with nothing important to this topic. Only to learn.

    Thanks in advance.

    There is not much I can say, it's actually an installation very simple and straight forward. When you create a new vSwitch on the ESXi host with an uplink to the DMZ network, you can deploy virtual machines attached to this vSwitch (its port VM group) in the subnet of the DMZ, as if they were physical systems. The different vSwitches on the ESXi host are not connected to each other somehow. The uplink does not have an IP address, it is only the VM in which the IP parameters must be configured appropriately.

    André

  • Design standard CS4 international English MAC

    I can't seem to find the download for CS4 Design Standard for MAC English International - can someone please advise?

    Will it work to download InDesign, Photoshop and Illustrator CS4 separately from this page?

    Thank you very much.

    Kindly try to produced CS4 download here.

  • How to for NAT internal IP address so it only gets teeth when you go to a particular destination and is also the United Nations concerns

    Hi all

    I have the following 2 sites. A branch, a data center.  The two race NPA 8.3.

    (192.168.120.1 (L3SW) - ASA)-PUBLIC INTERNET-(202.xxx.xx.242) ASA

    DATA CENTER                                                                           BRANCH

    I need 192.168.120.1 to be able to do a ping 202.xxx.xx.242 for the purpose of the SLA, which means that I need to NAT to break the internet. However, I also need to be able to SSH to 192.168.120.1 during several VPN tunnels to other branches on private subnets.

    How can I configure a NAT to my ASA rule so that 192.168.120.1 tries to talk to 202.xxx.xx.242, NAT 192.168.120.1 to the internet, but all other destinations than 192.168.120.1 should talk to the service (IE LAN via VPN), do not NAT?

    Hello Dean,

    I would recommend a NAT twice basically is the same terminology as a 'political NAT', you can specify that your source host will be translated to some IP only when it is addressed to some destination or destinations, so, basically, you can create a network of the object with the IP address of the source, another network object with the public IP address you want to use to translate the 192.168.x.x address and then click the destination network object, so it will be like this:

    network of the IP_192.168.120.1 object

    Home 192.168.120.1

    network of the TRANSLATED_IP_FOR_192.168.120.X object

    host 99.99.99.99 -> an example

    Network IP_202.XXX of the object. XXX.242

    202.xxx of the host. XXX.242

    NAT static IP_192.168.120.1 TRANSLATED_IP_FOR_192.168.120.X destination (indoor, outdoor) static source IP_202.XXX. XXX.242 IP_202.XXX. XXX.242

    In this way traffic that comes 192.168.120.1 form through a VPN tunnel, it will not be matched this NAT statement, since this statements NAT says that he will only translated when switching to the 202.XXX. Address xxx.242, now you can run a package tracer and see how it goes,

    Please note and hides as correct this answer if it helped you, keep me posted!

    Thank you

    David Castro,

  • To vpn Site to Site of DMZ

    Hello

    I recently install a vpn site-to site between a pix 515 running 6.3 (5) and a juniper netscreen. The tunnel is configured to only allow communications between two hosts, one at each end of the tunnel. Then, the client wanted to be the host behind the pix of their demilitarized zone. We made appropriate changes to the address list ACL nat0 and match, but now it has stopped working.

    When I do a sh crypto ipsec sa, I get decaps and packages, but no program to decrypt and encrypt the packets. Sh isakmp his watch an active tunnel between two end points.

    I don't know where to look for here. Haven't found anything on google.

    Here is the current result of sh crypto ipsec his:

    local ident (addr, mask, prot, port): (192.168.210.50/255.255.255.255/0/0)

    Remote ident (addr, mask, prot, port): (10.1.0.36/255.255.255.255/0/0)

    current_peer: a.b.c.d:500

    LICENCE, flags is {origin_is_acl},

    #pkts program: encrypt 0, #pkts: 0, #pkts 0 digest

    #pkts decaps: 38, #pkts decrypt: 5741, #pkts check 5741

    compressed #pkts: 0, unzipped #pkts: 0

    #pkts uncompressed: 0, #pkts compr. has failed: 0, #pkts decompress failed: 0

    Errors #send 0, #recv 5703 errors

    local crypto endpt. : z.y.x.w, remote Start crypto. : a.b.c.d

    Path mtu 1500, overload ipsec 56, media, mtu 1500

    current outbound SPI: 0

    SAS of the esp on arrival:

    the arrival ah sas:

    SAS of the CFP on arrival:

    outgoing esp sas:

    outgoing ah sas:

    outgoing CFP sas:

    Thank you!

    -Jeff

    You did nat exemption like that right?

    (Dmz) NAT 0 access-list...

  • ASA5505 DMZ to access LAN

    Hi, I wonder if anyone has a quick solution to my problem here. We have several servers on the DMZ (192.168.2.0/24), but they cannot access all the resources inside, by default. We would like to open an inside (10.1.1.5) Syslog server to the servers in the DMZ, then we can collect syslog servers. What is the best way to set this up?

    Thank you.

    Hello

    The standard syslog servers use udp/514. Once you configure the syslog IP address in your DMZ servers, the connection will be inititiated DMZ to internal syslog server. You must configure accesslist to distribute this...

    !

    DMZ2IN list extended access permitted udp 192.168.2.0 255.255.255.0 10.1.1.5 host eq 514

    !

    You already have an existing ACL for the servers in the DMZ for internet access. Then apply in the appropriate order.

    HTH

    MS

  • NSX and DMZ

    I currently have firewall NSX distributed controlling East-West traffic and using security groups to define where traffic can and cannot flow.  I currently have a physical firewall which is currently used to set my DMZ.  If I want to spend my DMZ zone so that it is defined by the NSX, how traffic between internal VMs not in the DMZ and internal VMs in the demilitarized zone are isolated?  It will flow through the perimeter firewall, or is it only separated by the distributed firewall and security groups?

    As a general rule, the edge device serves North/South gateway and firewall.  There are many approaches that can be taken:

    While the physical world is often based on physical separation, NSX allows to build an environment apart from DMZ using micro-segmentation services and advanced firewall to limit and control the flow of traffic, accomplishing the same goals achieved by traditional approaches of physical separation with the physical firewall.

    Of course, security administrators can take time to adapt to this new model of cloud of the demilitarized zone has collapsed and may still require a certain level of separation.  It is not uncommon to create a DMZ off interfaces connected directly to North-South edge device maintenance traffic.

    Components of the NSX can be configured in many ways to facilitate the physical and logical isolation.  Areas of transport can be used to ensure that the networks protected from VXLAN reside only on specific hosts.  Logical switches can be created according to the application profile, and based on rules set up to ensure the logical switch.  It is even possible to place all virtual machines on the same logical switch and apply rules to the level of the virtual machine or group.  Whatever the approach, the rules will result in the same level of security.

  • How Nat my internal hosts for Lan to Lan VPN

    Hi all, I have to connect a L2L to another company, however, they want we host NAT internal to a different subnet. There may be side address conflicts there. They want us to the Nat my 192.168.200.0 to 10.10.12.0 subnet subnet. All class C to the L2L.

    192.168.200.0 ASA1 <---> <-- internet="" --="">ASA2<-->

    (10.10.12.0)

    Any suggestions on how I can get this working? I know that it will take just not a 100% on access lists lists some access and I'm trying to keep to a minimum and the time, right now we are just the standard nating for guests a couple of a global IP address for internal Internet traffic.

    Thank you...

    Daniel

    Here's what can be configured:

    access list static L2L permit ip 192.168.200.0 255.255.255.0 192.168.10.0 255.255.255.0

    public static 10.10.12.0 (inside, outside) access list static L2L

    If you have already configured from 192.168.200.0/24 192.168.10.0/24 NAT exemption, you need to remove it because the NAT exemption has priority over static translation.

    As a result, you must also change your ACL crypto to come from 10.10.12.0/24 instead of 192.168.200.0/24 and counterpart what ASA also has to change the ACL crypto to source of 192.168.10.0/24 to 10.10.12.0/24 as follows:

    Your ACL crypto: cryptoACL ip 10.10.12.0 access list allow 255.255.255.0 192.168.10.0 255.255.255.0

    Peer crypto ACLs: permit ip 192.168.10.0 access list cryptoACL 255.255.255.0 10.10.12.0 255.255.255.0

    Hope that helps.

  • LAN to LAN VPN with NAT - solved!

    Hello world

    I have problems with a VPN L2L is implemented and logged, however when traffic comes from the other side of the tunnel it is not the host to internal network using a static NAT. Inside host 172.18.30.225 is current NATted to yyy.30.49.14 which is an IP address on the DMZ (yyy.30.49.0 255.255.255.240) Interface.

    Here is the configuration

    object-group network NET Tunnel
    network-host xxx.220.129.134 object

    Access tunnel list - extended ACL permit ip host yyy.30.49.14 object-group NET Tunnel

    correspondence address card crypto MAP_Tunnel 20 Tunnel-ACL

    the Tunnel-iServer-NAT object network
    Home yyy.30.49.14
    network of the Tunnel and drop-in iServer object
    Home 172.18.30.225

    network of the Tunnel and drop-in iServer object
    NAT (internal, DMZ) static Tunnel-iServer-NAT

    I hope that it is enough for someone to help me.

    Thank you

    M

    Version 8.3.1 ASA

    Post edited by: network operations

    The internal host does live on the network DMZ or internal? If she lives on the internal network, you can not NAT to the DMZ to interface and make it out of the external Interface, assuming that the external interface is the interface of VPN endpoint. If you terminate the VPN on the DMZ interface and the internal host lives on the internal network, then that's fine.

  • denied due to failure of reverse path of NAT

    I have an ASA5505 (ASDM 7.1 basic licence (3), ASA) 9 () (2) and I am confused about "declined due to the failure of reverse NAT".

    My IP pattern is as follows:

    INSIDE = 10.0.1.0/24

    DMZ =172.16.0.0/24

    VPN_Pool = 172.16.20.0/24

    PROBLEM: Vpn users can connect to the ASA but can't reach anything on the LAN or DMZ.

    TRIAGE: I ran the plotter of package with the following result:

    ALB - ASA # packet - trace entry inside tcp 172.16.20.2 1234 172.16.0.2 80

    Phase: 1
    Type:-ROUTE SEARCH
    Subtype: entry
    Result: ALLOW
    Config:
    Additional information:
    in 172.16.0.0 255.255.255.0 DMZ

    Phase: 2
    Type: NAT
    Subtype: volatile
    Result: ALLOW
    Config:
    Additional information:

    Phase: 3
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional information:

    Phase: 4
    Type: HOST-LIMIT
    Subtype:
    Result: ALLOW
    Config:
    Additional information:

    Phase: 5
    Type: NAT
    Subtype: volatile
    Result: ALLOW
    Config:
    Additional information:

    Phase: 6
    Type: IP-OPTIONS
    Subtype:
    Result: ALLOW
    Config:
    Additional information:

    Phase: 7
    Type: CREATING STREAMS
    Subtype:
    Result: ALLOW
    Config:
    Additional information:
    New feed created with id 6415 package sent to the next module

    Result:
    input interface: inside
    entry status: to the top
    entry-line-status: to the top
    the output interface: DMZ
    the status of the output: to the top
    output-line-status: to the top
    Action: allow

    -QUESTION?

    The error received is «...» Asymmetrical NAT rules matched for flows forward and backward; Connection for tcp src outside:172.16.20.1/52036(LOCAL\user) DMZ:172.16.0.2/3389 dst refused due to the failure of the path reverse NAT."

    What NAT rules I have to apply to allow users access to the LAN/DMZ resources?

    Current NAT is the following:

    1 (DMZ) to dynamic interface of the DMZ_NET source (outdoor)
    translate_hits = 1623, untranslate_hits = 34
    Source - origin: 172.16.0.0/27, translated: (MY-real-IP-DELETED) / 21
    2 (inside) to the obj_any interface dynamic source (external)
    translate_hits = No. 2851, untranslate_hits = 121
    Source - origin: 0.0.0.0/0, translated: (MY-real-IP-DELETED) / 21

    THANKS IN ADVANCE FOR HELP!

    The pool of addresses for VPN users must have an exemption for all DMZ NAT or inside networks, they will use. They appear as out of addresses (even if they receive a local private IP address) based on their interface of penetration.

    Therefore, without an exemption from costs of NAT, traffic back to them is NATted by one of your two NAT rules above (while incoming traffic was not NATted). So the message of «asymmetric NAT rules» matched to flow forward and backward

    Your plotter package them specified as inside and so you have a false positive indication would be given to the movement.

  • Cisco 2911 and ASA 5512 remove double NAT

    Greetings,

    I have 2 subnets on Cisco 2911 router

    192.168.3.0/24 and 192.168.1.0/24

    3rd network 192.168.4.0/24 is natting internal interface to the modem for internet access. creating 2 NAT (NAT in router) and NAT in Modem

    I just bought Cisco ASA 5512, no chance I could remove the Cisco 2911 router NAT and set the default gateway for Cisco ASA?

    Yes you are right...

    You must ensure that you get the routed LAN traffioc to hit inside the interface ASA in ASA, you can do PAT/NAT to access...

    Concerning

    Knockaert

  • VPN L2L ASA with NAT

    Hello, I was hoping someone might have an example of a site to site VPN configuration where the ASA is statically NATting its internal network. Basically the same configuration like this, but instead of "not nat", the ASA is NATting. So instead of the remote site, connect to the local network 10.10.10.0/24, ASA would be NAT at 172.16.17.0/24 for example.

    http://www.Cisco.com/en/us/products/ps9422/products_configuration_example09186a0080b4ae61.shtml

    Thank you.

    Mike

    It's not very complicated, just keep in mind that NAT is done before the encryption.

    So if you your network 10.10.10.0/24 nat internal to 172.16.17.0/24:

    public static 172.16.17.0 (Interior, exterior) 10.10.10.0 netmask 255.255.255.0

    You can use the address translated into your crypto-ACL:

    REMOTE VPN ip 172.16.17.0 access list allow REMOTE-NET 255.255.255.0 255.255.255.0

    I suppose that you run ASA v8.3 + that you referred to an older document. If you have a more recent software, the logic is the same but the NAT commands differ.

    Sent by Cisco Support technique iPad App

  • Archives preview error: "internal error."

    Hello

    When I try to import and file LCAS using /AdminUI, application and services link. I find error below. What is the cause of the error, why I get error previewing archive: "internal error."

    The log below, it is mentioned that there is a problem of access. Please help me on this.

    02/12/07 12:31:28, 717 INFO [org.apache.struts.tiles.TilesRequestProcessor] Tiles default definition found for query processor ".

    2012-02-07 12:31:43, ERROR [com.adobe.livecycle.design.service.commands.PreviewLCACommand] Preview ACL 423:

    ALC-DSC-000-000: com.adobe.livecycle.design.client.DesigntimeServiceException: internal error.

    to com.adobe.livecycle.design.service.utils.ApplicationInfoUtil.createAppInfoDocument (application ationInfoUtil.java:1253)

    at com.adobe.livecycle.design.service.commands.PreviewLCACommand.execute (PreviewLCACommand.j ava: 119)

    to com.adobe.livecycle.design.service.DesigntimeServiceImpl$ 27.doInTransaction (DesigntimeSer viceImpl.java:1106)

    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute (EjbTr ansactionCMTAdapterBean.java:357)

    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doRequiresNew (EjbTransactionCMTAdapterBean.java:299)

    at sun.reflect.GeneratedMethodAccessor266.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)

    to org.jboss.ejb.StatelessSessionContainer$ ContainerInterceptor.invoke (StatelessSessionConta iner.java:237)

    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke (CachedConnectionI nterceptor.java:158)

    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke (StatelessSessionInstance Interceptor.java:169)

    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)

    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)

    at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:404)

    at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)

    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)

    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)

    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke (ProxyFactoryFinderInterceptor. java: 138)

    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)

    at org.jboss.ejb.Container.invoke(Container.java:960)

    at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)

    at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)

    to $Proxy196.doRequiresNew (Unknown Source)

    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute (EjbTransactionProvi der.java:143)

    at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute (DefaultTransactionT emplate.java:79)

    at com.adobe.livecycle.design.service.DesigntimeServiceImpl.previewLCA (DesigntimeServiceImpl .java:1100)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke (DefaultPOJOInvokerImpl.jav one: 118)

    at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept (InvocationInterceptor. java: 140)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept (DocumentPassi vationInterceptor.java:53)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    to com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$ 1.doInTransaction (Transa ctionInterceptor.java:74)

    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT (EjbTran sactionBMTAdapterBean.java:197)

    at sun.reflect.GeneratedMethodAccessor384.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)

    to org.jboss.ejb.StatelessSessionContainer$ ContainerInterceptor.invoke (StatelessSessionConta iner.java:237)

    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke (CachedConnectionI nterceptor.java:158)

    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)

    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)

    at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext (AbstractTxInterceptorBMT.java:1, 73)

    at org.jboss.ejb.plugins.TxInterceptorBMT.invoke(TxInterceptorBMT.java:77)

    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke (StatelessSessionInstance Interceptor.java:169)

    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)

    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)

    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke (ProxyFactoryFinderInterceptor. java: 138)

    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)

    at org.jboss.ejb.Container.invoke(Container.java:960)

    at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)

    at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)

    to $Proxy197.doBMT (Unknown Source)

    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute (EjbTransactionProvi der.java:95)

    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept (TransactionInt erceptor.java:72)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept (InvocationStra tegyInterceptor.java:55)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept (InvalidStateIntercep tor.java:37)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept (AuthorizationInterc eptor.java:188)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)

    at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)

    to com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage (AbstractMessage Receiver.java:93)

    at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend (VMMessageDispatcher.java:19 8)

    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send (AbstractMessageDispat dear .java: 66)

    at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)

    at com.adobe.livecycle.design.client.DesigntimeServiceClient.previewLCA (DesigntimeServiceCli ent.java:1016)

    at com.adobe.repository.ui.aac.struts.actions.PreviewArchiveAction.execute (PreviewArchiveAct ion.java:147)

    at com.adobe.repository.ui.aac.struts.actions.CommandProcessorAction.execute (CommandProcesso rAction.java:228)

    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)

    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)

    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)

    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 290)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at com.adobe.repository.ui.aac.AacServletFilter.doFilter(AacServletFilter.java:137)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at com.adobe.framework.SecurityFilter.doFilter(SecurityFilter.java:206)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at com.adobe.framework.SessionBundleFilter.doFilter(SessionBundleFilter.java:135)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at com.adobe.repository.ui.aac.CharacterEncodingFilter.doFilter (CharacterEncodingFilter.java:76)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)

    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)

    at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke (SecurityAssociationValve.ja goes: 179)

    at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)

    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)

    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)

    at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke (CachedConnectionValve.java: 157)

    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)

    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)

    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)

    at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.ja goes: 580)

    to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:447)

    at java.lang.Thread.run(Thread.java:619)

    Due to: java.io.FileNotFoundException: app.info (access is denied)

    at java.io.FileOutputStream.open (Native Method)

    in java.io.FileOutputStream. < init > (FileOutputStream.java:179)

    in java.io.FileOutputStream. < init > (FileOutputStream.java:131)

    to java.io.FileWriter. < init > (FileWriter.java:73)

    to com.adobe.livecycle.design.service.utils.ApplicationInfoUtil.createAppInfoDocument (application ationInfoUtil.java:1248)

    ... more than 112

    2012-02-07 12:31:43, 595 ERROR [STDERR] 7 February 2012 12:31:43 com.adobe.repository.ui.aac.struts.actions.CommandProcessorAction run

    SEVERUS: Application Administration: Archives preview error: "internal error."

    com.adobe.repository.ui.aac.AacException: ALC-AAFC-006-000: internal error.

    at com.adobe.repository.ui.aac.struts.actions.PreviewArchiveAction.execute (PreviewArchiveAct ion.java:250)

    at com.adobe.repository.ui.aac.struts.actions.CommandProcessorAction.execute (CommandProcesso rAction.java:228)

    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)

    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)

    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)

    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)

    at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 290)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at com.adobe.repository.ui.aac.AacServletFilter.doFilter(AacServletFilter.java:137)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at com.adobe.framework.SecurityFilter.doFilter(SecurityFilter.java:206)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at com.adobe.framework.SessionBundleFilter.doFilter(SessionBundleFilter.java:135)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at com.adobe.repository.ui.aac.CharacterEncodingFilter.doFilter (CharacterEncodingFilter.java:76)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)

    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter (ApplicationFilterChain.j ava: 235)

    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)

    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)

    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)

    at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke (SecurityAssociationValve.ja goes: 179)

    at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)

    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)

    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)

    at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke (CachedConnectionValve.java: 157)

    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)

    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)

    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)

    at org.apache.coyote.http11.Http11Protocol$ Http11ConnectionHandler.process (Http11Protocol.ja goes: 580)

    to org.apache.tomcat.util.net.JIoEndpoint$ Worker.run (JIoEndpoint.java:447)

    at java.lang.Thread.run(Thread.java:619)

    Caused by: ALC-DSC-000-000: com.adobe.livecycle.design.client.DesigntimeServiceException: internal error.

    to com.adobe.livecycle.design.service.utils.ApplicationInfoUtil.createAppInfoDocument (application ationInfoUtil.java:1253)

    at com.adobe.livecycle.design.service.commands.PreviewLCACommand.execute (PreviewLCACommand.j ava: 119)

    to com.adobe.livecycle.design.service.DesigntimeServiceImpl$ 27.doInTransaction (DesigntimeSer viceImpl.java:1106)

    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.execute (EjbTr ansactionCMTAdapterBean.java:357)

    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterBean.doRequiresNew (EjbTransactionCMTAdapterBean.java:299)

    at sun.reflect.GeneratedMethodAccessor266.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)

    to org.jboss.ejb.StatelessSessionContainer$ ContainerInterceptor.invoke (StatelessSessionConta iner.java:237)

    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke (CachedConnectionI nterceptor.java:158)

    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke (StatelessSessionInstance Interceptor.java:169)

    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)

    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)

    at org.jboss.ejb.plugins.TxInterceptorCMT.runWithTransactions(TxInterceptorCMT.java:404)

    at org.jboss.ejb.plugins.TxInterceptorCMT.invoke(TxInterceptorCMT.java:181)

    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)

    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)

    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke (ProxyFactoryFinderInterceptor. java: 138)

    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)

    at org.jboss.ejb.Container.invoke(Container.java:960)

    at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)

    at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)

    to $Proxy196.doRequiresNew (Unknown Source)

    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute (EjbTransactionProvi der.java:143)

    at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute (DefaultTransactionT emplate.java:79)

    at com.adobe.livecycle.design.service.DesigntimeServiceImpl.previewLCA (DesigntimeServiceImpl .java:1100)

    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at com.adobe.idp.dsc.component.impl.DefaultPOJOInvokerImpl.invoke (DefaultPOJOInvokerImpl.jav one: 118)

    at com.adobe.idp.dsc.interceptor.impl.InvocationInterceptor.intercept (InvocationInterceptor. java: 140)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.interceptor.impl.DocumentPassivationInterceptor.intercept (DocumentPassi vationInterceptor.java:53)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    to com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor$ 1.doInTransaction (Transa ctionInterceptor.java:74)

    at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doBMT (EjbTran sactionBMTAdapterBean.java:197)

    at sun.reflect.GeneratedMethodAccessor384.invoke (unknown Source)

    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)

    at java.lang.reflect.Method.invoke(Method.java:597)

    at org.jboss.invocation.Invocation.performCall(Invocation.java:359)

    to org.jboss.ejb.StatelessSessionContainer$ ContainerInterceptor.invoke (StatelessSessionConta iner.java:237)

    at org.jboss.resource.connectionmanager.CachedConnectionInterceptor.invoke (CachedConnectionI nterceptor.java:158)

    at org.jboss.ejb.plugins.CallValidationInterceptor.invoke(CallValidationInterceptor.java:63)

    at org.jboss.ejb.plugins.AbstractTxInterceptor.invokeNext(AbstractTxInterceptor.java:121)

    at org.jboss.ejb.plugins.AbstractTxInterceptorBMT.invokeNext (AbstractTxInterceptorBMT.java:1, 73)

    at org.jboss.ejb

    2012-02-07 12:31:43, 626 ERROR [STDERR] .plugins. TxInterceptorBMT.invoke (TxInterceptorBMT.java:77)

    at org.jboss.ejb.plugins.StatelessSessionInstanceInterceptor.invoke (StatelessSessionInstance Interceptor.java:169)

    at org.jboss.ejb.plugins.SecurityInterceptor.invoke(SecurityInterceptor.java:168)

    at org.jboss.ejb.plugins.LogInterceptor.invoke(LogInterceptor.java:205)

    at org.jboss.ejb.plugins.ProxyFactoryFinderInterceptor.invoke (ProxyFactoryFinderInterceptor. java: 138)

    at org.jboss.ejb.SessionContainer.internalInvoke(SessionContainer.java:648)

    at org.jboss.ejb.Container.invoke(Container.java:960)

    at org.jboss.ejb.plugins.local.BaseLocalProxyFactory.invoke(BaseLocalProxyFactory.java:430)

    at org.jboss.ejb.plugins.local.StatelessSessionProxy.invoke(StatelessSessionProxy.java:103)

    to $Proxy197.doBMT (Unknown Source)

    at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute (EjbTransactionProvi der.java:95)

    at com.adobe.idp.dsc.transaction.interceptor.TransactionInterceptor.intercept (TransactionInt erceptor.java:72)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.interceptor.impl.InvocationStrategyInterceptor.intercept (InvocationStra tegyInterceptor.java:55)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.interceptor.impl.InvalidStateInterceptor.intercept (InvalidStateIntercep tor.java:37)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.interceptor.impl.AuthorizationInterceptor.intercept (AuthorizationInterc eptor.java:188)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.interceptor.impl.JMXInterceptor.intercept(JMXInterceptor.java:48)

    at com.adobe.idp.dsc.interceptor.impl.RequestInterceptorChainImpl.proceed (RequestInterceptor ChainImpl.java:60)

    at com.adobe.idp.dsc.engine.impl.ServiceEngineImpl.invoke(ServiceEngineImpl.java:121)

    at com.adobe.idp.dsc.routing.Router.routeRequest(Router.java:129)

    to com.adobe.idp.dsc.provider.impl.base.AbstractMessageReceiver.routeMessage (AbstractMessage Receiver.java:93)

    at com.adobe.idp.dsc.provider.impl.vm.VMMessageDispatcher.doSend (VMMessageDispatcher.java:19 8)

    at com.adobe.idp.dsc.provider.impl.base.AbstractMessageDispatcher.send (AbstractMessageDispat dear .java: 66)

    at com.adobe.idp.dsc.clientsdk.ServiceClient.invoke(ServiceClient.java:208)

    at com.adobe.livecycle.design.client.DesigntimeServiceClient.previewLCA (DesigntimeServiceCli ent.java:1016)

    at com.adobe.repository.ui.aac.struts.actions.PreviewArchiveAction.execute (PreviewArchiveAct ion.java:147)

    ... more than 37

    Due to: java.io.FileNotFoundException: app.info (access is denied)

    at java.io.FileOutputStream.open (Native Method)

    in java.io.FileOutputStream. < init > (FileOutputStream.java:179)

    in java.io.FileOutputStream. < init > (FileOutputStream.java:131)

    to java.io.FileWriter. < init > (FileWriter.java:73)

    to com.adobe.livecycle.design.service.utils.ApplicationInfoUtil.createAppInfoDocument (application ationInfoUtil.java:1248)

    ... more than 112

    Concerning

    Sunil

    Hello

    Above solved the issue. I think it is problem with Windows 2008 R2 edition OS. The user that I was using to start the Jboss adobe server was a Director too but when I started the server as admin I don't have any problem.

    Start the server as an administrator. It works perfectly.

    Concerning

    Sunil

  • ASA Anyconnect VPN do not work or download the VPN client

    I have a Cisco ASA 5505 that I try to configure anyconnect VPN and thought, I've changed my setup several times but trying to access my static public IP address of the external IP address to download the image, I am not able to. Also when I do a package tracer I see he has been ignored through the acl when the packets from side to the ASA via port 443, it drops because of the ACL. My DMZ so will he look like something trying to access the ASA via the VPN's going to port 443. Here is my config

    XXXX # sh run
    : Saved
    :
    ASA Version 8.4 (3)
    !
    hostname XXXX
    search for domain name
    activate pFTzVNrKdD9x5rhT encrypted password
    zPBAmb8krxlXh.CH encrypted passwd
    names of
    !
    interface Ethernet0/0
    Outside-interface description
    switchport access vlan 20
    !
    interface Ethernet0/1
    Uplink DMZ description
    switchport access vlan 30
    !
    interface Ethernet0/2
    switchport access vlan 10
    !
    interface Ethernet0/3
    switchport access vlan 10
    !
    interface Ethernet0/4
    Ganymede + ID description
    switchport access vlan 10
    switchport monitor Ethernet0/0
    !
    interface Ethernet0/5
    switchport access vlan 10
    !
    interface Ethernet0/6
    switchport access vlan 10
    !
    interface Ethernet0/7
    Description Wireless_AP_Loft
    switchport access vlan 10
    !
    interface Vlan10
    nameif inside
    security-level 100
    IP 192.168.10.1 255.255.255.0
    !
    interface Vlan20
    nameif outside
    security-level 0
    IP address x.x.x.249 255.255.255.248
    !
    Vlan30 interface
    no interface before Vlan10
    nameif dmz
    security-level 50
    IP 172.16.30.1 255.255.255.0
    !
    boot system Disk0: / asa843 - k8.bin
    passive FTP mode
    DNS lookup field inside
    DNS domain-lookup outside
    DNS domain-lookup dmz
    DNS server-group DefaultDNS
    Name-Server 8.8.8.8
    Server name 8.8.4.4
    search for domain name
    network obj_any1 object
    subnet 0.0.0.0 0.0.0.0
    network of the Webserver_DMZ object
    Home 172.16.30.8
    network of the Mailserver_DMZ object
    Home 172.16.30.7
    the object DMZ network
    172.16.30.0 subnet 255.255.255.0
    network of the FTPserver_DMZ object
    Home 172.16.30.9
    network of the Public-IP-subnet object
    subnet x.x.x.248 255.255.255.248
    network of the FTPserver object
    Home 172.16.30.8
    network of the object inside
    192.168.10.0 subnet 255.255.255.0
    network of the VPN_SSL object
    10.101.4.0 subnet 255.255.255.0
    outside_in list extended access permit tcp any newspaper object Mailserver_DMZ eq www
    outside_in list extended access permit tcp any newspaper EQ 587 Mailserver_DMZ object
    outside_in list extended access permit tcp any newspaper SMTP object Mailserver_DMZ eq
    outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq pop3 object
    outside_in list extended access permit tcp any newspaper EQ 2525 Mailserver_DMZ object
    outside_in list extended access permit tcp any newspaper of the Mailserver_DMZ eq imap4 object
    outside_in list extended access permit tcp any newspaper EQ 465 Mailserver_DMZ object
    outside_in list extended access permit tcp any newspaper EQ 993 Mailserver_DMZ object
    outside_in list extended access permit tcp any newspaper EQ 995 object Mailserver_DMZ
    outside_in list extended access permit tcp any newspaper EQ 5901 Mailserver_DMZ object
    outside_in list extended access permit tcp any newspaper Mailserver_DMZ eq https object
    Note access list ACL for VPN Tunnel from Split vpn_SplitTunnel
    vpn_SplitTunnel list standard access allowed 192.168.10.0 255.255.255.0
    pager lines 24
    Enable logging
    timestamp of the record
    exploitation forest-size of the buffer to 8192
    logging trap warnings
    asdm of logging of information
    Within 1500 MTU
    Outside 1500 MTU
    MTU 1500 dmz
    local pool VPN_SSL 10.101.4.1 - 10.101.4.4 255.255.255.0 IP mask
    ICMP unreachable rate-limit 1 burst-size 1
    ASDM image disk0: / asdm - 647.bin
    don't allow no asdm history
    ARP timeout 14400
    NAT (inside, outside) static source inside inside static destination VPN_SSL VPN_SSL
    NAT (exterior, Interior) static source VPN_SSL VPN_SSL
    !
    network obj_any1 object
    NAT static interface (indoor, outdoor)
    network of the Webserver_DMZ object
    NAT (dmz, outside) static x.x.x.250
    network of the Mailserver_DMZ object
    NAT (dmz, outside) static x.x.x.. 251
    the object DMZ network
    NAT (dmz, outside) static interface
    Access-group outside_in in external interface
    Route outside 0.0.0.0 0.0.0.0 x.x.x.254 1
    Timeout xlate 03:00
    Pat-xlate timeout 0:00:30
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    Floating conn timeout 0:00:00
    dynamic-access-policy-registration DfltAccessPolicy
    AAA-server protocol Ganymede HNIC +.
    AAA-server host 192.168.10.2 HNIC (inside)
    Timeout 60
    key *.
    identity of the user by default-domain LOCAL
    Console HTTP authentication AAA HNIC
    AAA console HNIC ssh authentication
    Console AAA authentication telnet HNIC
    AAA authentication secure-http-client
    http 192.168.10.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ca trustpoint localtrust
    registration auto
    Configure CRL
    Crypto ca trustpoint VPN_Articulate2day
    registration auto
    name of the object CN = vpn.articulate2day.com
    sslvpnkey key pair
    Configure CRL
    Telnet 192.168.10.0 255.255.255.0 inside
    Telnet timeout 30
    SSH 192.168.10.0 255.255.255.0 inside
    SSH timeout 15
    SSH version 2
    Console timeout 0
    No vpn-addr-assign aaa

    DHCP-client update dns
    dhcpd dns 8.8.8.8 8.8.4.4
    dhcpd outside auto_config
    !
    dhcpd address 192.168.10.100 - 192.168.10.150 inside
    dhcpd allow inside
    !
    dhcpd address dmz 172.16.30.20 - 172.16.30.23
    dhcpd enable dmz
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    authenticate the NTP
    NTP server 192.168.10.2
    WebVPN
    allow outside
    AnyConnect image disk0:/anyconnect-linux-64-3.1.06079-k9.pkg 1
    AnyConnect enable
    tunnel-group-list activate
    internal VPN_SSL group policy
    VPN_SSL group policy attributes
    value of server DNS 8.8.8.8
    client ssl-VPN-tunnel-Protocol
    Split-tunnel-policy tunnelspecified
    value of Split-tunnel-network-list vpn_SplitTunnel
    the address value VPN_SSL pools
    WebVPN
    activate AnyConnect ssl dtls
    AnyConnect Dungeon-Installer installed
    AnyConnect ssl keepalive 15
    AnyConnect ssl deflate compression
    AnyConnect ask enable
    ronmitch50 spn1SehCw8TvCzu7 encrypted password username
    username ronmitch50 attributes
    type of remote access service
    type tunnel-group VPN_SSL_Clients remote access
    attributes global-tunnel-group VPN_SSL_Clients
    address VPN_SSL pool
    Group Policy - by default-VPN_SSL
    tunnel-group VPN_SSL_Clients webvpn-attributes
    enable VPNSSL_GNS3 group-alias
    type tunnel-group VPN_SSL remote access
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    inspect the rsh
    inspect the rtsp
    inspect sqlnet
    inspect the skinny
    inspect sunrpc
    inspect xdmcp
    inspect the sip
    inspect the netbios
    inspect the tftp
    Review the ip options
    inspect esmtp
    !
    global service-policy global_policy
    context of prompt hostname
    no remote anonymous reporting call
    call-home
    Profile of CiscoTAC-1
    no active account
    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
    email address of destination [email protected] / * /
    destination-mode http transport
    Subscribe to alert-group diagnosis
    Subscribe to alert-group environment
    Subscribe to alert-group monthly periodic inventory
    monthly periodicals to subscribe to alert-group configuration
    daily periodic subscribe to alert-group telemetry
    Cryptochecksum:d41d8cd98f00b204e9800998ecf8427e
    : end

    XXXX #.

    You do not have this configuration:

     object network DMZ nat (dmz,outside) static interface

    Try and take (or delete):

     object network DMZ nat (dmz,outside) dynamic interface

Maybe you are looking for

  • Where is the minimum font size in Safari Version 10.0 (11602.1.50.0.10)?

    I need to control the font size in Safari. Apple seems to have removed. Does anyone know where the police since the previous version of Safari controls went? Workarounds don't work. I find myself with a page too big for my Air 13 "screen if fonts are

  • Visual presentation of Firefox 10.1

    My Ubuntu automatically updated Firefox 10.1 only yesterday. After a few hours, I dropped the Ubuntu version and came back to 3.6. I tried to post this to "Feedback", but the page just always told me to upgrade to the latest version of Firefox... (..

  • Can I put my iPad (with WiFi) OS X5.1

    Hi all I got an iPad that has free Wi - Fi and works on OS X 5.1 and everything works fine. Anyway, what I want to know is can I upgrade the operating system? Thank you very much.

  • Satellite L755 and Win8 - Fn + F8 does not work

    Hello world I upgrade to Windows 8 Pro Media Center and everything is ok, but the Wi - Fi and FN + F8 shortcut does not appear when I press FN + F8 to or disable the Wi - Fi or Bluetooth, I installed all the drivers and value added package but works

  • In the bar of windows svn revision number

    Hello I think about the possibility of putting on the application toolbar (exe) SVN revision number. I would be characteristic of the usueful to quickly assess, what source application, code review is to build in. What I need is therefore a kind of t