Do a loadmovie in an empty clip

Similar Questions

• In windows movie maker, I'm trying to open an old project. It opens, but there is no video clips - only x or empty clips. How can I get the original film clips show?

  In windows movie maker, I'm trying to open an old project. It opens, but there is no video clips - only x or empty clips. How can I get the original film clips show?

  I did a movie and released a dvd. Then, I moved my files from movie on an external hard drive to store files and free up space on my computer. So I went back to try a pull up the project and got every X / white clips. So now, I rebooted my computer with the video files I removed on the external hard drive and it still shows empty clips.
  Help.

  The red Xs indicate that Movie Maker cannot find the original source files.
  If the files are still available... just right click on the red Xs and go to the
  current location of the files source and you may be able to restore the
  path.

• Create empty Clip in a loop

  I have a table with the names of image in it.  I want to loop through the array and create empty movie clips and load an image in there.  I also want to do this in 3 rows.  At the moment I just have difficulty to get the images to load.  Any help would be appreciated.  Thank you.

  CODE:

  function placeImages() {}

  trace ("Place of Images");

  trace (currentArray);

  startX = 110;

  startY = 86;

  xSpace = 63;

  xSpace = 50;

  line = 1;

  switch (currentArray)

  {

  case 'regArray2 ':

  for (var x = 1; x < regArray2.length + 1; x ++) {}

  trace ("AddChild");

  this.createEmptyMovieClip ("image" + x, 1000);

  This ['image' x] ._x plus 110;

  This ['image' x] ._y plus 86;

  This ["image" + x] ._xscale = 10;

  This ["image" + x] ._yscale = 10;

  This ["Picture" + x] .loadMovie (regArray2 [x]);

  }

  break;

  }

  }

  See the regArray2 if the following fails:

  function placeImages() {}

  trace ("Place of Images");

  trace (currentArray);

  startX = 110;

  startY = 86;

  xSpace = 63;

  xSpace = 50;

  line = 1;

  switch (currentArray)

  {

  case 'regArray2 ':

  for (var x = 0; x)< regarray2.length;="" x++)="">

  trace ("AddChild");

  this.createEmptyMovieClip ("image" + x, this.getNextHighestDepth ());

  This ['image' x] ._x plus x %3 * 200 + 100;

  This ["image" + x] ._y = 200 * Math.floor (x/3) + 100;

  scale after loading is finished

  This ["Picture" + x] .loadMovie (regArray2 [x]);

  }

  break;

  }

  }

• loadClip and loadmovie - control of the clip after it is loaded!

  Hey, just can't get it is as simple as it should be.

  I'm trying to learn more about loading movies so I can create a structure for an e-learning course.

  I have read so many things, but nothing explains why it does not work.

  I have 2 clips on my main timeline.  One is an animation that I have just a ball backwards

  back and forth. The other is just a blue box converted to a clip.

  The bluebox is called cc, its instance name is cc1

  the animated film is called insiderMovieClip and its instance name is insiderMovieClip1

  Here the code that I wrote.

  --------------------------------------------------------
  insiderMovieClip1.onRollOver = function() {}
  This.Play ();
  }

  insiderMovieClip1.onRollOut = function() {}
  This.Stop ();
  }

  
  CC1.loadMovie("01-VOM_Meters_INTRODUCTION.swf");
  Cc1._width = 50;
  Cc1._height = 50;

  trace ("CC1 =" + cc);

  Cc1.onRollOver = function() {}
  This.Play ();
  }

  Cc1.onRollOut = function() {}
  This.Stop ();
  }

  -------------------------------------------

  The film that I load is an entertainment box that moves just a little black box back.

  So when I run, I can right-click the insiderMovieClip1, and he begins to animate.

  The clip of cc1 reacts anycode I give at all. (for example cc1.stop ();)

  Its as if I have loaded into the shell of cc1, but I have no control in there...

  I tried several variants of the loadmovide and loadclip.  Everything else I can get loaded.

  but can't seem to stop or start the movie on my mandate. (actually I can't do anything

  but load)

  My goal is to load several movies at once, allowing the user to the page between them, but I did not

  WAN to start until I say.  I want to write it so it pulls a table, then the range

  can be dynamic. (IE page 10, page 300, etc...)

  Why is loadclip and loadmovie such pain?

  [Thanks in advance for your kind help...:]

  I can't really follow what you are trying to do, but I'll offer that if you want to control a movie loaded, you must wait until it has loaded before trying to act with her.  From what I see of your code, you don't do that.  You really want to use loadClip to load the film rather than loadMovie.  The reason loadClip supports having an event listeners that you can use to detect when the file is finished loading and then take some steps you plan with the event handler function.

  If you search for MovieClipLoader.addListener in the Flash help documents, there is an example that is complete enough for what you need to configure.  The main difference being that you would use the onLoadComplete rather than the onLoadInit event.

• Problems changing text in SWF with loadMovie

  I am loading a swf file that is in the same location as the swf file loading.  The loaded file is a clip with a dynamic text box

  feedbackHolder_mc._x = 10
  feedbackHolder_mc._y = 10

  feedbackHolder_mc.loadMovie ("feedbackHolder.swf");
  comments = "Hello";
  feedbackHolder_mc.feedbackbox_mc.feedback_txt.htmlText = comments

  The text will not complete Hello.  But if I put it on a button, click on to change the text, it works.  Don't know what the issue is. I tried to create an empty clip in which to load the swf file in spite of the feedbackHolder_mc being empty.

  It's a matter of time.  When you load a movie, it takes time, but your code is not wait for that to happen, trying to assign a value to something before he is present.  If you need this populous when loading, so you will need to use the MovieClipLoader class loadClip method.  Which States have a listener who allows you to determine when loading is complete, which can be used to trigger a function that defines your value (s).

  If you are looking for the MovieClipLoader class addListener method, there is an example.

• loadMovie to load a photo

  Hello
  
  I; m using this code:
  
  
  this.createEmptyMovieClip ("image_mc", 9);
  image_mc.loadMovie (" http://www.helpexamples.com/flash/images/image1.jpg");
  
  trace ("size:" + image_mc._height);
  
  
  I need to center the image that I'm loading but I can't get the size. After the drawing, I got:
  
  Height: 0
  
  If I use loadMovie with a non-empty clip, I had the original size of the MC.
  
  any ideas?
  
  Thanks in advance

  You must wait until loading is completed before you can access precisely the _width and _height of images properties. That is to say, use the preloader code or the auditor of the moviecliploader class onLoadInit() method.

• Funds loaded with LoadMovie sovereigns are really big?

  I have the following action in "frame.swf" on frame 1:
  
  loadMovie ("home.swf", "DisplayArea");
  
  My "home.swf" is exactly 730 x 400, but during the loading in frame.swf, it is much more. Is any way to set the size of the loaded .swf?

  Yup - just as suspect - your clip is resized - select it with your transformation Panel open - you'll
  See is climbed more than 140 percent.

  ******************************************
  --> * Adobe Certified Expert *.
  --> www.mudbubble.com
  --> www.keyframer.com

  alexfierro wrote:
  > I do not see where to change the percentage of scaling. DisplayArea is just an empty clip.
  >
  > Files can be found here:
  > http://www.alexfierro.com/OT/loadmovie.zip (38 KB)
  >
  > Please help!

• Find the width of a JPEG loaded into a clip

  I load a page of the bio information. Next to the photo of the person (photos may vary in width), I want to put a column of buttons 20 pixels to the right of the photo. After I load the photo in a clip from film empty, so I try to get the width of the photo in order to understand the position x, buttons next to him. Here's what I have:
  
  myImage = "images /" + _level0.images [link];
  loadMovie (myImage, image_mc);
  JPEG load OK in image_mc.
  
  trace ("image_mc._x =" + image_mc._x);
  I get "Image_mc._x = 393" as expected.
  
  trace ("myImage._width =" + myImage._width);
  I get "image_mc._width = undefined".
  
  trace ("image_mc._width =" + image_mc._width);
  I get "image_mc._width = 0".
  
  How can I find the width of the loaded JPEG?

  you are probably trying to get the width until the image is fully loaded... Use the MovieClipLoader class to load the image into the empty clip, then use the onLoadInit event to get a sample of the video clips (which corresponds to the width of the images).

  var mcLoader:MovieClipLoader = new MovieClipLoader();
  var myListener:Object = new Object();
  myListener.onLoadInit = {function(target:MovieClip):Void}
  trace (image_mc._width);
  };
  mcLoader.addListener (myListener);
  mcLoader.loadClip (myImage, image_mc);

• Empty MC plays not mp4 no external

  Before playing the mp4 I set preloader in frame 1 place

  to preload the movie and play in frame 3.

  myLoaded = Math.round (getBytesLoaded ());
  myTotal = Math.round (getBytesTotal ());
  myLoaded/myTotal = myPercent;
  If (myLoaded == myTotal) {}
  gotoAndStop (3);
  } else {}
  gotoAndPlay (1);
  }

  I have an empty clip mc that uses this code to call in an external mp4 (image 3) HD video:

  var loader: MovieClipLoader = new MovieClipLoader();
  this.createEmptyMovieClip("emptyMC",1);
  loader.loadClip ("Yes we different.mp4", emptyMC);

  When tested with the mp4 or one of these work items.

  Can I use this method to play the mp4 video or I have to convert it to another format?

  If your mp4 is not displayed properly (or), you have a mp4 frame that is not correct.

  I'm not an expert in the video settings, but I would like to know the correct settings using google to search for: flash mp4 settings.

• Expedition of archive external inside video clip, is outside the room

  Neste caso, não quero criar um clipe apartir of Código film. o movie clip, ja is no palco.

  o traco that appears not inferiro canto da tela indica o maintains external, mas como referencia traco esta o no centro land.

  an e o quadro cinza referencia.

  

  Code:

  Stop();
  alvo1.loadMovie ("conforto.swf");

  o clipe esta instaciado como "alvo1" movie

  Estou ultilizando o 2.0 action script.

  ___________________________________________________________________________________

  __________________________________________________________________________________

  In this case I won't create a clip to apartir of the code. video clip already exists in the palco.  the trace that appears in it I sing inferiro of screen shows archive external, but as a reference track is central archives.  the reference is the gray image.

  Stop (); alvo1.loadMovie ("conforto.swf"); Movie clip this instaciado as "alvo1".

  I'm ultilizando action script 2.0 reference is the gray image.

  OK, nesse caso EU creio that o problema seja com o conteudo dentro movieClip while still... tried Québec o ponto referencia MC again, mudando a bolinha lugar branca outra vez e veja is no land final ele muda also. Deveria mudar or voce pode estar doing something wrong then.

  MAS dificil porque sei bit of AS3 help e e great nada of AS2.

  Talvez seja você try best no forum of AS2, apesar of ter muita gente aqui hear or bike AS2.

  Abraço.

• Gallery photos AS 2.0 Help

  Hello

  I am very new to Flash and need help.  I use CS4 and ActionScript 2.0.  I am trying to create a photo gallery.  I have created 4 different movie clip buttons located on the content layer.  Each button consists of a single image.  When you press the button movie clip, I want the image full-size to appear on the stage next to the buttons.  You can see the buttons in the image below.  I am trying to create an empty movie clip holder residing in the main timeline while the buttons are found on the content layer.  Can someone help me with the code that I need to get the images to load into the empty clip and unload then when the next button is selected?  I can't get the buttons 'talk' to the empty movie clip holder.  I managed to create a code for a holder clip from empty film in each button, but then I find myself with four images all over each other.   Thanks in advance to all who wish to share their knowledge of the code.

  

  If you are a beginner, then you should consider forget AS2 and upward for AS3.  That said...

  As you learn just AS2, is there no time better than the present to drop bad coding practices, namely, placing the code on the objects.  Give the name of your button_mc bodies, just like you did with the mcHolder and use the code timeline for them.

  cabinBtn.onRollOver = function() {}
  cabinBtn.gotoAndStop ("over");
  spectrumCursor.gotoAndStop ("hover");
  }

  cabinBtn.onRollOut = function() {}
  cabinBtn.gotoAndStop ("up");
  spectrumCursor.gotoAndStop ("normal");
  }

  free of charge for you (press)... it defies ReleaseOutside intentions

  cabinBtn.onPress = function() {}

  spectrumCursor.gotoAndStop ("click");
  }

  cabinBtn.onRelease = function() {}

  mcHolder.loadMovie ("cabin.jpg");

  cabinBtn.gotoAndStop ("up");
  spectrumCursor.gotoAndStop ("hover");
  }

  cabinBtn.onReleaseOutside = function() {}
  cabinBtn.gotoAndStop ("up");
  spectrumCursor.gotoAndStop ("hover");
  }

  As long you have each button by using the mcHolder object to load the images in the code, as you have will take it care to replace the previously loaded.

• Loading a SWF in my flash banner

  Hello

  I am creating a banner for a website, and I need to load an external images scroll swf located behind the layers in my flash banner.  Another example is the site: www.miracledetail.co.uk.

  I created managed to create everything in this banner except the scrolling images, so I have an external swf file to load into my flash banner project.

  I tried this...

  createEmptyMovieClip ("anim", 0); create a new, but empty film (anim) clip
  anim.loadMovie ("animation.swf"); load "animation.swf" into the void (anim) video clip
  Anim._x = 100; Adjust the position of the imported file "animation.swf".
  Anim._y = 100;

  I clicked on a first framework on a layer on the timeline and inserted the above actionscript code, with the anim.loadMovie function calls the external swf file.  However, when I do this, the drumming swf loaded and displayed on the top of my banner, and I see no banner at all.

  I tried to put the script on multiple layer action so that the swf file will play behind the other layers in the banner, but again it keep loading on the banner.

  I hope you know what I'm saying here and what I'm trying to achieve.  Also to add that I am not very good with flash at all (as you have probably already guessed) so ideas tutorial or instructions on how to do this would be ideal.

  Kind regards

  Volterony22

  Hello

  Just to make it simple, create an empty clip on the stage itself rather than use an actionscript and use the actionscript code just to load external swf file in the clip.

  Create an empty clip on a layer below your expected layer where you want to load an external swf on the stage. Now, you can position the empty clip to the desired direction x, y on the stage OR you can use actionscript code to do. Give an instance name to this empty clip called "loadermc" in the properties panel. Add the following at the top most layer code (have one devoted to stocks if you have not already)

  your movie clip instance void name.loadMovie ('your external SWF file URL');

  loadermc.loadMovie ("animation.swf");

  If you do not position the empty movieclip earlier, you can use your code to make

  Anim._x = 100; Adjust the position of the imported file "animation.swf".
  Anim._y = 100;

  I hope this helps.

  Thank you!

• External SWF does not (online)

  And I really need help. I am creating a Web site for someone and it works perfectly offline, I have two empty clips on the main site. We charge a player (swf) external video, and the other load the menu external accordion (swf) of the site. I have test offline and it works perfectly. But when I test online (hosted) its does not not the menu accordion. Here are links to the site.
  http://www.affiliatemedia.cc/stride/default.html (main site) to the left of the video's menu. Here is the Menu that is supposed to load http://www.affiliatemedia.cc/stride/Menu.html. the only code that I have for her
  
  Stop();
  
  _root.menuBody.loadMovie ("menu.swf");
  _root. Body.loadMovie ("strideplayer2.swf");
  
  my charger menu code is as follows: (code inside a clip, which is the percentage of txt)
  
  onClipEvent (enterFrame) {}
  load = _parent.getBytesLoaded ();
  Total = _parent.getBytesTotal ();
  display = Math.round ((loaded/total) * 100);
  {
  If (load == total)
  _parent. Play();
  }
  }
  
  And that works too (offline). It is in action script 2
  
  What is the code inside the accordion. Not sure, I would really appreciate your help.
  
  Thank you for taking the time to read this message!

  If the line of code you've shown earlier was a typo only for display (small "m")...?

  _root.menuBody.loadMovie ("menu.swf");

  I'm curious to know why you have what you call a preloader for the menu?  If there is a reason for having to wait for the file to load, you must use the method MovieClipLoader.loadClip () rather than loadMovie.  loadClip() supports have an event listener that you can use to determine when the file has finished loading, as well as report increase in load capacity.

• Sequencing external .swfs

  I have my main timeline 2 empty clips moive, mc1 and mc2.

  I use this script to load external swf files:

  _root. MC1.loadMovie ("menu.swf");

  _root. MC2.loadMovie ("Home.swf");

  I want the content of mc1 to finish loading before mc2 starts loading.  The content of the 2 clips will change, so I can't add actionscript to the external .swfs for scheduling.  The script must be contained in the main sequence, or on my menu buttons.

  Something like:

  _root. MC1.loadMovie ("menu.swf");

  If (_root.mc1.getBytesLoaded > = _root.mc1.getBytesTotal) {}

  _root. MC2.loadMovie ("Home.swf");

  }

  This, of course, does not work, but it's kind of logic I'm after.  Someone at - it ideas?

  I use CS3 and AS2.0.

  Thanks in advance,

  Shannon

  use:

  _root. MC1.loadMovie ("menu.swf");

  clearInterval (preloadI);

  preloadI = setInterval(preloadF,100);

  function preloadF() {}

  {If (_root.mc1.getBytesLoaded () > = {_root.mc1.getBytesTotal () & _root.mc1.getBytesLoaded () > 50})}

  clearInterval (preloadI);

  _root. MC2.loadMovie ("Home.swf");

  }

  }

• Dynamic masking of Movieclip

  Hello
  I am facing a stupid problem, but I can't understand this solution. so I want emergency aid.
  
  I take a Movieclip, which includes some animation box square as a Movieclip of masking. I'm trying to load an Image into an empty clip. And give the masking of this Sqaure box Movieclip. But which does not show masking me. They both view individually.
  
  Code is as follows:
  1 blank_mc is on stage and a movieclip empty.
  2 MaskMC is a lively SquareBox Movieclip and attach via code at the stage
  3. adjustment mask
  blank_mc.loadMovie('Images/Image1.jpg');
  _root.attachMovie ('MaskMC', 'mask_mc', 10);
  blank_mc. SetMask (mask_mc);
  
  
  But the two clips are coming to the stage individually. That I missing something or need to make any change. Please help me urgently

  You attach the mask to the scene
  But you use the mask to the MovieClip that is in charge of the Image.

  When you use 'bitmapcaching', that the MovieClip reference is stored, in the same way the ContentData is stored in the MC of mask.

  Then, inside the Mask_mc or Content_mc load file after the mask, will remove the mask.

  Following the code is a simple implementation if you plan to hide a movie that loads external file