Do I need a fax modem for my HP 4500 G510n-z all-in-one printer?

Similar Questions

• Error 1053 of the print spooler for HP Officejet 6500 a Plus All in One printer

  I get this error every time I try to install this printer. When I try to start the spooler in Services file, this error pops up. I ran a diagnostic and found that there may be errors of registry key in some files, but I don't kn Ow how to get rid of them. I tried every way start the print spooler, but he won't let me. Other diagnostic tools do not work because I can't even install the printer of dam. Help!

  The print spooler is a Microsoft services so that they would be the best people to talk to.  Most likely, the registry keys for the print spooler has not installed right.  My advice would be to format and reinstall the OS, but you can see what Microsoft has to say before doing this.  They may know a solution for this specific error.  Here is a link to a discussion I found on Microsoft Community on this issue.  I hope this helps.

  Print spooler starts windows 7 error 1053

• HP5610 All in One Printer and for some reason any fax does not work

  * - Original title - the printer does not properly

  I have a HP5610 All in One Printer and for some reason any fax does not work.  What could be the problem?  I don't have the CD installation disc.

  Hello

  To provide a proper resolution, I would need more information on your side.

  1. what operating system is installed?

  2. don't you make changes to the computer before this problem?

  We can refer to this article and check if that helps.

  Unable to send or receive Fax: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01670485

  You can also ask your question in the Forums of HP Support (scanning, fax and copy): http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/bd-p/Scan

  Thank you.

• How do you set the time and date for the fax on HP Office Jet 4622 all-in-one printer?

  I installed the all-in-one printer HP Office Jet 4622 and everything works like.  However on the test page for the date and fax are showing Jan-00-00 00:00 AM.  I don't know how to change the date and time.  Help, please.  Thank you.

  Use the Setup (wrench) button on the front of the printer to look through the settings menu to set the date and time of the printer.

• 2543 all-in-One printer: what ink need a purchase for 2543 all-in-one printer (model name: D3A80A) Please?

  What ink need a purchase for 2543 all-in-one printer (model name: D3A80A) Please?

  61 HP cartridges are a pretty popular current model, I expect it would be stored in most places that carry the cartridges.  I did a search at Walgreens, about 3/4 of them had 61 cartridges in stock at Houston.

• I need a Windows 7 for HP Officejet r45 all-in-One Printer driver

  I need a driver for windows 7 that works with HP Officejet r45 all-in - one Printer

  Did you check on HP.com?
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=61561&LC=en&cc=us&DLC=en&lang=en&cc=us

• Scanning with HP all-in-one printer with fax and scan Windows in Windows 8

  When you install a printer driver in Windows 8, you can scan from your computer without having to install any additional software to HP. This is particularly useful if you want to or not does not require the full functionality software or if your printer does not have a driver to scan for Windows 8.

  Windows Fax and Scan uses a Microsoft Service called WIA (Windows Image Acquisition) to capture an image from the scanner and allow you to save without the need for additional drivers.

  In addition, Windows Fax and Scan cannot scan to PDF.

  Learn how to analyze with your all-in-one printer from HP using Windows Fax and Scan.

  If you have problems using Windows Fax and scan with Windows 8 make a post below. I hope this helps anyone looking for an alternative method of scanning in Windows 8.

• Where can I find drivers for HP officejet 4215 all in one printer

  Please can someone help provide me the driver for hp officejet 4215 all in one printer... I have tried severally to download from the Hp support center but no luck... Thank you very much

  Original title: DRIVER of PRINTER

  http://support.HP.com/us-en/product/HP-OfficeJet-4215-all-in-one-printer-series/351105/model/351107/document/c01796879/

  HP print driver printer - install and use the built-in Windows

  This document is for HP printers that do not have a driver of HP full features for Windows 10, Windows 8, Windows 7, or Windows Vista.

  If a full features of HP driver is not available for your printer, you must install the print driver built-in. A complete driver functionality for one or more versions of Windows is not available for your printer, either from the CD that came with your printer or the site HP Web.

  Where is the download button? HP print driver is integrated into the Windows operating system or installed through the Windows Update function on your computer. You don't need to download anything from a Web site to print, scan or fax.

  See the frequently asked questions in this document for more information, including how to scan using this driver.

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth

• The problems of security of the data during the recycling of a HP Photosmart Premium Fax all-in-One Printer - C309a?

  Given a document photocopied with a HP Photosmart Premium Fax all-in-one printer - C309a can be recovered later from the unit?

  I want to know if it is safe to recycle this unit, which was used to print, fax, scan, and copy documents that may have sensitive data. Some articles and videos on the net, it is clear that some photocopiers are vulnerable in this regard. I appreciate any assistance with this question - thanks!

  Hello

  Reset will erase everything. Please try: turn the power off, press and hold # and 6 while and for a few seconds after turning it on.

  Kind regards.

• drivers for my HP 7410 all-in-one printer

  Can I download drivers for my all-in-one HP 7410 printer on my laptop, and transfer them on a disk, and then on my desk. I don't have a wireless to the desktop.

  Thank you

  Hey Heezie. You can certainly do. Then tranfer to another computer, you will need some sort of storage such as a USB device, a disc external hard or you can burn them on a CD. What operating system do you use?

  Here is the link to the drivers: Driver & Software Downloads - all-in-one printer, HP Officejet 7410

  You provide me what operating system you were using, so I couldn't give you the direct link to the drivers. In the link above, you will need to choose your operating system. Select the driver tab, and then download the "full feature drivers."

  If you have problems to find the pilot informed me to your operating system and I will point you to the download.

  Thank you

  Sean

• 7520 HP photosmart e-All-in-one: printer Photo ink for all print jobs

  Why my printer uses ink cartridge photo instead of the regular cartridge for all print jobs? I need to change a setting? He uses ink photo when I print documents or photos on the internet and it's always the first cartridge to change. How can I get it to stop and use the regular ink cartridge?

  Hi @ohchango,

  Welcome to the Forums of HP Support!

  I see that you are curious about the black photo cartridge on your HP Photosmart 7520 e-all-in-one printer. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Photo black cartridges are designed to be used, it cannot be bypassed or ignored. When printing from your computer, you can set it to print in grayscale (black ink only), meaning that it will use less of the photo in the black, but they will still get used for maintenance. For more information, see use of inkjet printers ink.

  NOTE: It will use the black photo cartridge for printing black if photographic Support is selected for the type of paper or printing is set to auto or to a picture frame.

  In order to help you, I'll need more information.
  What operating system do you use?
  Mac OS X: How to find which Mac OS X Version is on my computer?
  Windows: How to find the Windows Edition and the Version on your computer.

  If you need assistance, please let me know the instructions above. I look forward to hear from you.

• 5740 HP e-all-in-one printer: how to change the destination for the scans folder

  I bought a HP Officejet 5740 e-all-in-one printer I connected wireless to a Win 7 PC. A month later, I added a new win 10 PC in my network (LAN), and I also installed the printer on this new PC. When I went to scan a document using the HP (NO Windows Fax and Scan) print software, the printer asked me which PC to scan to, and I chose the old Win 7 PC. The scanned image went to the folder My Documents\My scans of Win 7 PC, as expected.

  Two questions, both assuming I want to use the HP software to scan:

  1. is there a way to set a default value of PC to the computer target for digital images?

  2. How can I change the folder to which scaned images are sent?

  What are the answers to these two Qs if I decide to use Windows Fax and Scan instead of the printer software?

  Any help would be appreciated.

  Roy

  Hi Roy,

  Yes, you get a more integrated experience if you install the vs HP software by using the Add method of the printer.   And Yes, you should be able to do much more PC software rather than on the front panel of the unit.    And Yes, the aspect analysis software PC is much better than the Windows Fax & Scan.   Windows Fax Scan & gives a good experience of the box and is sufficient for many, but for those who want to do more, such a framing auto, rotate, reorder pages, etc... the HP scanning software is much better.

  I forgot what version of HP comes with your OJ5740 scanning, but we she recently rejected a new more complete solution that comes with the version that installs for your device recommended.   Here is a link where you can get that below.   I recommend you to install the latest web downloadable full version for your device first.   Then install this

  HP extended Scan

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi for Windows.

  You'll then have two versions, one called "HP Scan" and the other called "HP Scan extended.   If you find that "HP Scan" looks like 'HP Scan expanded', while the product was the version latest (we drove to this new version about 2 years ago).

• I don't remember the name of softerware for my HP All in one Printer

  I have a HP J4580 printer. I had my recently re-created PC. I don't remember the name of the software that I had which had all my functions in it. Scan, copy, e-mail, fax, percentage of printer cartridge.  Nobody know, don't forget the name of this software?

  Hello

  Could be the HP Solution Center or HP printer Assistant. Please select the operating system for your software features full doanload computer and the driver from the following link and install it on your computer:

  http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/drivers/

  Kind regards.

• Photosmart Premium Fax c309 Series all in one printer Wireless Radio does not work

  Some time before, the radio on my Photosmart Premium Fax c309 series wireless all in one printer stops working.

  With a wireless network test:

  Wireless is on (but light indication only is not lit)

  wireless network card has failed

  "The wireless radio does not work.  Contact Hp support.

  Any help would be greatly appreciated!

  Thank you

  Smithb2

  Hi smithb2, welcome to the forums there.

  I saw your post on the wireless radio does not not on your model Photosmart C309.

  I did some research and came across this post in the community that seemed to have worked for others with the same problem.

  Re: Without the printer wireless radio does not

  I hope that helps!

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions: click here.

  Have a great Thursday