Do I need a modem to connect wirelesss router using broadband?

Similar Questions

• My ethernet port is not working and I need another way to connect to my desktop to the modem

  My ethernet port was released at some point on my Compaq Presario and my old modem, I connected to the internet via a usb port. However, I had to replace the modem and now there is no usb port. I'm going to replace my router anyway, but I don't know what to do! Help!

  Your motherboard specifications are HERE you have 3 PCI slots for add-on cards. Probably a modem in one of them now, which can be removed or left. Always have 2 empty slots. Right PCI network card plugged into the slot and comes with a cd of drivers.

• All in a single 228 MS cannot find my router/modem to connect to the internet

  I just replaced the hard drive on my desktop MS 228 All In One. I installed windows 7 Home Edition premium and everything seems ok. The computer displays any internet connection included, even though we have a laptop computer and two tablets
  Connected wireless to our router / modem box. I got this computer connected wireless, until the hard disk is dead. I do not understand why it cannot locate the internet now. I get the message to connect to the computer with a cable, but I need a Wi - Fi connection because the internet area is some 3 meters across the room!
  What should I do for a wireless connection? I must have done a few years ago, when I first installed this computer... but
  Do not remember how I did it... Help please...

  Thank you very much Dunibar, all this work after having followed your instructions... your a star.

  Very much appreciated. What ABOUT James... Maxiboy.

• New modem cannot connect to Time Capsule

  Xfinity gave me a new gateway wireless modem/router a few weeks ago.  I hung it just as the former with a cable to the Capsule of time (not wireless).  Since then, my MacBook Pro (OS X Yosemite 10.10.5) can not find the TC and said "backup drive is not available."  Meanwhile, the TC has a flashing orange light.  I rebooted everything more than once.  The time on my Mac says Machine I have not backed up since 15 February, but when I go into "Time Machine", it looks like there were multiple regular backups since then (I'm skeptical).  User support Comcast tinkered around for an hour and he couldn't understand.  Another suit tech support tried for another hour and could not make any progress.  How can I make it work again?

  You MUST reset the TC factory and start over... This happens whenever you make a network change and there is no change in larger network than what you were doing... to replace the router.

  Here are the instructions to get going again. It is a comprehensive so that your needs can be met with just a couple of them.

  Start from a factory reset. No files are lost on the drive hard in doing so.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  And then redo the configuration of the computer with the Mavericks - Yosemite - ElCapo. (MYELCAP)

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the problem is using wireless TC24ghz and TC5ghz with fixed channels as it also seems to help stop the nonsense. But it can be tried in the second round. IE, plan on a first and second series of changes to fix this... If all goes well... I note other steps can you tour2.

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC. But it's important for deriving from intellectual property in all directions when MYELCAP do not remember his name for 5 min after a reboot done for poor network management.

  4. check that your share on the computer name does not change... Make sure that it is also in line with the above... short without space and pure alphanumeric... but this change will mess up your TM backup... so be prepared to make a new, full backup. Sorry... keep this one for the second round, if you want to avoid a new backup.

  5 attach the TC disc into the computer manually.

  In Finder, go, connect to the server in the main menu,

  Type in SMB://192.168.0.254 (or whatever ip of TC is that you made static. It's a default router 10.0.1.1 and I encourage people to stick with it unless you know what you're doing).

  You can use the name... SMB://TCgen5.local where you replace TCgen5 with your name of TC... local is the default domain of the TC and does not change.

  However the names are not so easy as... the IP address nor reliable. They are not at least not in Yosemite. The field can also be a problem if you are not clogged or wireless directly to the Treasury Board.

  6. ensure that IPv6 is set to link-local only in the computer. For example wireless open network, wireless and Advanced preferences / TCP/IP... and the difficulty of IPv6. link-local only. Do the same for the ethernet if you use it.

  

  It is a lot more jiggery pokery, you can try, but the above is a good start... If you still find not reliable... don't be surprised.

  You may need to do more work on the computer itself. for example, to reset the NVRAM/PRAM/SMC... helped some people. A clean installation of the operating system is also useful if you update installed.

  https://discussions.Apple.com/message/29202159?ac_cid=ha123456#29202159

  Let us know how you go.

  The xfinity is a modem router then the TC will be in bridge.

  If you continue to have problems, I need a few screenshots of the configuration... that should correspond to what I posted.

• My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

  My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

  Both devices are set to the highest security and each uses separate passwords.

  Non apple devices can collect data from iPhones or Mac using the time Capsule?

  With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

  Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

  If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.

• I recently got my restored iPod and now I'm trying to open it. He tells me that my Apple ID, once I have try to connect, cannot be used on my IPod. I NEED HELP!

  I recently got my restored iPod and now I'm trying to open it. He tells me that my Apple ID, once I have try to connect, cannot be used on my IPod. I tried to remove the device from my iTunes account and change my Apple ID but nothing works. But I still want later to register my ipod to my itunes for re account - download all my songs and others. I don't know what else to do.

  You need to use the recovery of modified ID used in environments > iCloud on the iPOd.

  If you have forgotten your Apple - Apple Support ID

  If you forgot your Apple ID - Apple Support password

• Intermittent connection with Cricket EC1705 Broadband modem problems.

  HARD TO STAY CONNECTED A WIDE CRICKET BROADBAND MODEM EC1705

  Hello

  1. What Windows OS version are you using?
  2. Were there any changes made to your computer before this problem?
  3. The internet disconnects frequently?
  4. What web browser do you use?
  5. You get an error?

  Try the methods and the resolution of problems in the following article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Also reference: http://windows.microsoft.com/en-us/Windows7/Why-is-my-Internet-connection-so-slow

  I hope this helps.

• How to configure Outlook Express using a hotmail account by using a USB from Rogers modem to connect to internet

  I have my hotmail account set as Microsoft Outlook on the laptop using a USB from Rogers modem to connect to internet (I put in place using outlook connector).  I want to configure my hotmail account in Outlook Express (I don't think that we can have two separate accounts of Microsoft Outlook email on a laptop).  I'm absolutely baffled as the server name, incoming and outgoing mail server addresses.  By Rogers Web site, the incoming server is POP3 incoming mail server: pop.broadband.rogers.com and mail server: smtp.broadband.rogers.com that does not work.

  Thanks for your help,

  Carol

  The parameters you listed are for a Rogers.com e-mail account, not for a Hotmail account.  Please see How to add your e-mail to Microsoft Outlook Express account to the right settings.

  BTW, you can have two separate accounts of Microsoft Outlook on a laptop.  Here are two ways to do:

  • If you and your partner have separate Windows user accounts, you will automatically have separate Outlook accounts.
  • If you use the same Windows user account, create a separate profile for each of you in Control Panel > Mail .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  I added a router and a connection high speed using windows vistawhen pc is connected to the router her there is no internet connection. When the pc connected to the Internet by modem cable is available

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  It will be useful.

• Used PC automatically log on internet, I need to look for connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: my PC will not automatically connect to my internet server. I need to find my connection manually, and then select it IE connect to the internet so that I can have internet. I need to do each time you start, where as in the past, my computer would automatically log on to the Web server. Help, please!

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Make sure that in the wireless router that broadcasts the SSID.

  You add a Wireless Access Point SSIDI to the top of the Wireless Manager.

  http://www.ezlan.NET/Vista/wireless_manager.jpg   (Control Panel, network and sharing Center. Upper-left click Manage wireless networks.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Connection pool keeping much-needed each of idle connections

  Database Oracle 12 c Enterprise Edition Release 12.1.0.2.0 - 64 bit Production	0
  PL/SQL Release 12.1.0.2.0 - Production	0
  CORE	12.1.0.2.0	Production	0
  AMT for Linux: Version 12.1.0.2.0 - Production	0
  NLSRTL Version 12.1.0.2.0 - Production	0

  Using JavaSE - 1.7

  With the help of ucp.jar, ons.jar and OJDBC7.jar

  I have configured the following data source

  PDS = PoolDataSourceFactory.getPoolDataSource ();

  pds.setConnectionFactoryClassName (factoryClassName);

  pds.setMaxPoolSize (maxPoolSize);                                                       maxPoolSize 10

  pds.setMinPoolSize (minPoolLimit);                                                        minPoolLimit 1

  pds.setMaxIdleTime (idleMaxTime);                                                        idleMaxTime 50

  pds.setMaxConnectionReuseTime (connectionReUseTime);                    connectionReUseTime 5

  pds.setConnectionWaitTimeout (waitTimeOut);                                       waitTimeOut 100

  pds.setAbandonedConnectionTimeout (abandonedConnectionTimeout);    abandonedConnectionTimeout 10

  pds.setInactiveConnectionTimeout (inactivityTimeout); time in seconds inactivityTimeout300

  pds.setTimeToLiveConnectionTimeout (timeToLiveConnection);               timeToLiveConnection 30

  In the class that actually uses it, I create a method on the connection object variable. Closing the connection as well as

  pds.getConnection (m:System.NET.Sockets.Socket.close ());

  e

  I think I will at most that a connection inactive appear when I followed the session. How to configure the pool so that project only on connection inactive? I am running queries for test once every five minutes. But I open three connections every time.

  Thank you

  I thought that it was inactive connections than I was told. However, I went back and asked and they said that they killed the active connections that have more than 5 minutes. That's what I need to know how to close active connections. Sorry for the confusion...

  Why would you kill connections that people use? That makes no sense.

  I suggest that you mark this thread as a RESPONSE and repost a question about ACTIVE connections.

  There is no way that anyone can establish a correlation between the parameters that you posted earlier with your new problem - he will make only the most confusing things.

• In the case I buy Adobe Acrobat Connect Pro and want to set up a meeting with my students... They need to buy Adobe Connect for virtual classrooms?

  In the case I buy Adobe Acrobat Connect Pro and want to set up a meeting with my students... They need to buy Adobe Connect for virtual classrooms?

  No, they haven't needed to purchase Adobe Acrobat Connect Pro license if they use a room of yours.

• How do I connect the router without home computer

  I bought my mother an Iphone and want it have WiFi instead of using 3 g data plan, but she doesn't have a computer at home at all. How to connect a router at home without a computer?

  Thank you!

  It doesn't work quite like that.  You don't just to go out and buy a router and instantly have wifi.  It you will need to sign up with an ISP first.

  Usually, it is best to first get your modem to the internet service provider and see what they give you.  The modem, they give you maybe already wifi and so you will not need to go out and buy a router.

• I need to get a certificate to continue using WI - FI how di I find the certificate?

  I need to get a certificate to continue using WI - FI how di I find the certificate?

  Original title: WiFi problem

  Hello

   
   
  1. who is the operating system installed on your computer?
  2. What is the exact error message that you receive?
  3. who is your Internet service provider?  Have you tried to contact them about this?
   
   
  Follow the steps mentioned below and check if that helps.
   
  Method 1: You can check if the router is configured for WPA and WPA2 connection:
  a. If the router is configured for WPA and the configuration of your wireless network on your computer must be configured the same way. That is to say, WPA.
  (b) if the router is configured for WPA2, then the configuration of your wireless network on your computer must be configured the same way. That is to say, WPA2.
   
   
   
   
  Method 2: You can manually disable authentication IEEE 802. 1 x. Subsequently, re - enable authentication IEEE 802. 1 x and see if the problem still occurs.
   
  See: If you use a NETGEAR wireless router, you can follow this link:
  Unable to connect to the network: Validation and certificate in Windows XP and Vista errors
  http://support.NETGEAR.com/app/answers/detail/A_ID/7334/~/unable-to-connect-to-network%3A-validation-and-certificate-errors-in-Windows-XP
   
   
  Reference: Use certificates for security and privacy
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/cert_ovr.mspx?mfr=true
   
   
   

• Office jet pro 8600 connect with router but not recognized on the network

  I just installed new router e1200 lonksys. JO HP 8600 pro connects with the router, but the printer cannot see 8600. IP 169.254.223.37 on said install ip is the placeholder and printer not connected. have restarted once 1000 and tried to reconnect. New router has OMP and thrust of 3 seconds the button on the router. Also failed to connect on the router definition reviews

  8600 worked fine on the old router. Problem started when I connected the router after that cable modem connected then modem vonage. Previous setting was cable - vonanage and wireless router - all worked well then.

  Also downloaded 8600 new complete software after losing the Wi - Fi connection - please help!

  If the Ethernet cable is plugged into the printer, it will disable the wireless radio.

  If this is not the case in the network menu, network by default.  Then, in the same network menu, run the Wireless Setup Wizard.

  If this does not work, we will come on your new router a bit.