Do I need to install the update 1 and 2, if I install 3 update?

Similar Questions

• I have a partitioned drive and you need to move the updates of the E: drive, how can I do? ___

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I a partitioned drive and you need to move the updates of the E: drive, how can I do?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  You do not have.

  The updates will install on the drive where Windows resides.
  TaurArian [MVP] 2005-2010 - Update Services

• How to disable the automatic updates?  I tried asking chat support and I was told that it was impossible.  I need to disable the updates because my school disables updates on the first day of class, and if my updates at home I will not be able to work bet

  I tried asking chat support and I was told that it was impossible.  I need to disable the updates because my school disables updates on the first day of class, and if my updates at home I will be not able to do work between school and home

  You can install older versions if you use an older version.  but the newer versions (for example, cc 2015) can always post files to open in cc.

  If you want to save a file for cs6 install cs6 at home.

• When I update my device I need to have the apple ID and I can not find and contact the owner of the first.

  Hello;

  I can't find the original owner of my camera.

  I can't have my Apple device Id. When I update my device I need to have the apple ID and I can not find and contact the owner of the first. And I have a lot of problem with this matter.please help me. Please unlock my device to activate locking Mode.Or maybe if I have the Apple Id for my camera I found the password.

  My phone number is:

  IMEI:

  *********

  ICCID:

  ********

  Serial No.:

  F2 * FFK

  Part number:

  ME300LL/A

  Please, please, please help me.

  best regards;

  Siavash

  
  

  < personal information under the direction of the host >
  

  Only the owner of the unit can remove locking activation. If you have the original receipt, you can try to take it to an Apple Store and ask them to do, otherwise return the unit to the person to whom it was purchased for a refund.

• I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software

  I run on a Mac CS6.  I need to change the operating system and would like to know if I can still install the software.  I upgraded to OS X 7 (Lion) for OS X 10 (Coyote), but my devices would not work.  I'm changing to OS X 7 (Lion), but this will eliminate my entire hard drive.  My CS6 software install?  I bought CS5 and CS6 improved.  I don't want to go on the CCif I don't have to.  Thank you!!!

  as long as you have your serial numbers and installation cs6 files, you should be ok.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7
  • Lightroom: 5.7.1. 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".

• Need help with the OSB Assign and replace the

  I have a proxy service that receives the SOAP message:

  " < = xmlns:soapenv soapenv:Envelope ' http://schemas.xmlsoap.org/SOAP/envelope/ "xmlns:SOAP - ENC =" " http://schemas.xmlsoap.org/SOAP/encoding/ "container =" " http://www.w3.org/1999/XMLSchema ">

  " < = xmlns:soapenv soapenv:Header ' http://schemas.xmlsoap.org/SOAP/envelope/ ">

  < / soapenv:Header >

  < soapenv:Body >

  " < pidx:OrderChange pidx:transactionPurposeIndicator = 'Replace' xmlns:pidx = ' http://www.API.org/pidXML "xmlns =" http://www.API.org/pidXML "" xmlns: xsi = " http://www.w3.org/2001/XMLSchema-instance "xsi:schemaLocation="C:\shareIt\OrderChange_1-2.xsd" > ""

  ...

  < / pidx:OrderChange >

  " < = Xmlns:ocp DeliveryInformation ' http://www.digitaloilfield.com/OCP ">

  ...

  < / DeliveryInformation >

  < / soapenv:Body >

  < / soapenv:Envelope >

  I need to take the OrderChange element and place it in a SOAP body and the DeliveryInformation element and place it in the SOAP of the same SOAP message header.

  The SOAP message is then sent to a business service that makes an HTTP POST of the SOAP XML.

  I created the service of the company and he sent some data test SOAP and it works very well, but cannot create a bridge between the Proxy and the Business Service.

  In the stream of messages of Proxy I tried to do an assignment in a routing. I tried to do the following:

  1. an XQuery query transform to generate the XML SOAP just described

  2. not the entitlement where the "Expression" is the transformation and the Variable is a variable based on a schema for SOAP.

  I can see that the company is trying to be invoked, but the SOAP data does not have to be formatted or passed.

  It is the right approach or is their a better way of

  1. create the SOAP wrapped XML

  2. call the Business Service.

  Any suggestions are appreciated. I can provide more detail if necessary.

  Kind regards.

  Thank you Vlad...

  I think I'm getting in that direction now. Just do some debugging.

  Appreciate the input. I will update with final results.

  Again, your help is greatly appreciated.

  Kind regards.

• I need to upgrade the CPU, motherboard and RAM in my machine. Which will impact my Activation of Windows genuine?

  I need to upgrade the CPU, motherboard and Ram in my machine. Which will impact my Activation of Windows genuine?

  original title: can I put my machine after GWA?

  It's a Genuine Windows Kit which is what you would be considered a retail license. In other words, that it is transferable to another computer, which means you have the right to support directly from Microsoft.

• I need to format the hard drive and it won't let me because the program is running.

  Please help someone... I have a desktop running windows 7.  I need to format the hard drive and it won't let me because the program is running.

  Any ideas on how to get this tour using the bios screen, or y at - it an other way round. The drive has a partition, but no other programs on it.  I'm actually getting rid of the computer and need to erase the first hard drive and reload windows xp pro.

  Thanks for any help given, I'm desperate.

  Original title: help with windows 7

  Reinstall Windows XP
  http://michaelstevenstech.com/cleanxpinstall.html

  Insert your Windows XP CD, and then restart your computer.

  When you are prompted to boot from the CD, do so. To do this, press any key on the keyboard.

  To learn how to change your BIOS options to boot from the DVD drive, the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

  Windows XP will go into its configuration process.

  Once you arrive at the welcome configuration, press enter on your keyboard to start the installation process

  Press F8 on your keyboard to accept the license agreement

  Select the partition, and then press D on your keyboard to remove it

  Select Format the partition using the NTFS file system

  Press F on your keyboard to start the formatting.

  Installation files will now be copied to your hard drive

  Your system will be rebooted, the installation of Windows XP will continue

• I need to change the credit card and cardholder of credit of our monthly plans... but I can't find any button billing. could you kindly say?

  Hi all

  I need to change the credit card and cardholder of credit of our monthly plans... but I can't find any button billing.

  can't find any support by adobe regarding billing issues.

  anyone of you could help me?

  Thank you

  Inga

  Change in the information of credit card to join creative cloud

  (1) connect to creative.adobe.com.

  2) click on the manage my subscription.

  (3) to change my billing information

  For the invoice

  (1) connect to adobe.com

  (2) go to my orders and select the order number, print the invoice here

• I have installed Waterfox, do I need to apply the update to firefox?

  Avast told me that I should update Firefox. I actually Waterfox, don't know if there are remnants of Firefox I need to get rid of (if so I would need advice). An update of Firefox applies to the Waterfox or it would have its own updates?

  Waterfox would have its own updates and should invite you to install if necessary. You can also update manually because you're 24 and Firefox/Waterfox is 28 right now. You can do so by downloading the Setup file and install on your existing installation of Waterfox.

  • http://www.waterfoxproject.org/

  In addition, Waterfox has its own team of support since she has not maintained or hosted by Mozilla.

  • http://www.waterfoxproject.org/support.php

  I thought they had a forum but they have a wire to overclock, so you can submit your additional requests it because it is a forum for Firefox.

  • http://www.overclock.NET/t/975626/waterfox-28-0-4-April-Firefox-64-bit

• Need to check the update of the BIOS Portege R830 without Intel TXT

  Hello Forum,

  I have exactly the same problem as described here 2 years ago:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65519

  I need to update my BIOS, but I can't because the update of the BIOS told me that the Intel TXT is enabled.
  Unfortunately I can not disable it in my bios. Its just not selectable. The 'cursor' jumping just above him.
  I can only 'hide' which does not help.
  I have the same thing for the VT - x and VT - d setting in the BIOS. Is not selectable or editable as well.

  TPM is not active if...
  I installed after infineon and he tells me I need to enable the TPM in the bios to use. :-(

  I have a very old Bios Version 3.1 and I read in the changelog that there are a lot of TPM in v 3.4 and 3.5 related changes...

  In any case...
  A P007Dv360A_EC77V140.zip file has been transferred to 2shared.com who fixed it at the time, a user named Paolo30.
  Unfortunately, that this file has been deleted on 2shared.com

  can someone please provide this file (or an update of the bios later) which resolves this issue?
  Thanks in advance.

  Portégé R830 - 10 p belongs to the series of PT321 if you need the BIOS for Portege R830 PT321

  You can download older versions of pages driver Toshiba BIOS.
  For example: http://www.toshiba-asia.com/sg/support/drivers

  On this page of Toshiba Asia I could find all the BIOS for this Portege model.

• Need help with the update of Windows (OS-Windows 7)

  Hello world

  Recently, I met a problem with Windows update on my laptop (OS-Windows 7). Everything is fine with it, but when I try to install updates (recommended or optional) window says that it downloads the updates, but the progress remains to 0KB and 0% downloaded status. I tried to restart the service of windows update with utility update of windows running, but without success. However, I was able to install updates, most of them associated with Microsoft.NET framework 3.5.1 (I'm not sure of the version of the .NET Framework is installed in my computer). But when I tried to install other updates updated security windows or .NET Framework 4. XX version update, he gave the same answer that I mentioned above.

  I can give my specifications and other information required if necessary.

  Please help me with this problem about the update of windows.

  Thanks for your time and your help.

  Try the following: set never 'Find updates' automatic updates and then restart Windows. Download and install KB3161608.

  http://support.Microsoft.com/kb/3161608

  Best regards, VZ

• Creative cloud needed to verify the update?

  Hello

  Recently I get the following message is displayed when you check the updates:

  

  Y at - it somewhere where the Application Manager that requires no CC can be downloaded from?

  I did not and have never had a subscription to the CC, just Standard CS6 and Lightroom 6 design.

  (I forgot to mention that it is running on Windows 10)

  Hello

  Please follow the steps below:

  Uninstall the Adobe Creative Cloud application (Creative Cloud help |) Uninstall the creative Office Cloud app)

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe "common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open the Adobe folder and if necessary remove Adobe Creative Cloud folder. [* important]

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  Step 4:

  Click on the link of shot and download Adobe Application manager and install the same:

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Once the installation is complete, double-click the launch of Adobe Application Manager on the desktop icon.

  It will start the update process and is updated for creative cloud application.

  Kind regards

  Sheena

• Need help with the update with several joins statement

  I have the following select statement, which takes 29 records:
  SELECT
  PAA. PROJECT,
  PAA. SEGMENT1,
  PEIA.expenditure_item_id,
  PEIA.expenditure_type,
  PEC.expenditure_comment
  OF PA.PA_PROJECTS_ALL APP.
  PEIA PA.pa_expenditure_items_all,
  PEC PA.pa_expenditure_comments
  where PPA.segment1 < '2008' and
  PPA.project_id = 52 and - just run for project # 20077119 for the test
  PEIA.expenditure_type = 'PAY' and
  PEIA.project_id = ppa.project_id and
  PEC. EXPENDITURE_ITEM_ID = PEIA. EXPENDITURE_ITEM_ID;
  
  I need to update the pec.expenditure_comments to a static field for 29 records. I guess I should start with the following, but don't know how to fill in the where:
  Update
  PEC PA.pa_expenditure_comments
  Set pec.expenditure_comment = ' REFERENCE HD #728'.
  where
  ???
  
  First time we have ever needed to update, so any help appreciated.

  Try using are:

  update pa.pa_expenditure_comments pec
  set    pec.expenditure_comment = 'REFERENCE HD#728'
  where exists ( select null
                 from   pa.pa_projects_all ppa
                 ,      pa.pa_expenditure_items_all peia
                 ,      pa.pa_expenditure_comments pec2
                 where  ppa.segment1 < ''    -- not sure what you posted here, so for next time:
                                             -- please put your examples between the code tags.
                 and    ppa.project_id = 52  -- just run for project # 20077119 for testing
                 and    peia.expenditure_type = 'PAYROLL'
                 and    peia.project_id = ppa.project_id
                 and    pec2.expenditure_item_id = peia.expenditure_item_id
                 and    pec2.expenditure_item_id = pec.expenditure_item_id
               );
  

• need help with the Update statement

  Hello
  I received a question in a course and I tried my best to respond, and now my brain is giving. I would really appreciate help with the update statement. I don't mind if you do not validate a solution, a little nudge in the right direction would be really useful. I'll post that I got.
  
  THE QUESTION
  / * For these agents disabled on more than seven missions, change their date of deactivation of the first date of deactivation of all the agents that have been activated in the same year as the agent that you update currently.
  */
  
  I have it divided into parts, here is my select statement to agents disabled on more than 7 missions, which produces the deactivation_dates in the agents table that I want to update...

  SELECT
  s.deactivation_date
  FROM
  (
  SELECT
  a.deactivation_date,
  count(m.mission_id) as nomissions
  FROM
  agents a
  INNER JOIN
  missions_agents m
  on
  a.agent_id=m.agent_id
  GROUP BY
  a.deactivation_date
  ) s
  WHERE
  s.nomissions>7 AND s.deactivation_date IS NOT NULL

  .. .and the code for the first date of deactivation for each year of activation agent

  select 
  a2.deactivation_date
  from
  agents a2
  where a2.deactivation_date= 
  (
  select min(a.deactivation_date)
  from 
  agents a
  where to_number(to_char(a.activation_date,'YYYY'))=to_number(to_char(a2.activation_date,'YYYY'))
  )

  ..... I am not real to marry these two statements together in the Update statement. I can't extract each date of deactivation produced in the first select statement and their match against the first date of deactivation in the year they have been activated for the second select statement.
  
  Any help greatly appreciated... :))

  I began to wonder how things would :)

  user8695469 wrote:
  First of all why he chooses the date the earliest of all agents

  UPDATE  AGENTS_COPY AC /* (1) */
  SET     DEACTIVATION_DATE = (
  SELECT  MIN(AGS.DEACTIVATION_DATE)
  FROM    AGENTS_COPY  AGS
  ,       AGENTS_COPY AC /* (2) */
  WHERE   TRUNC(AGS.ACTIVATION_DATE,'YEAR') = TRUNC(AC.ACTIVATION_DATE,'YEAR') /* (3) */
  )
  

  He recovers as soon as the subquery has not been correctly set in the SET clause. It seems you are trying to update a correlated, but we are still having a conceptual shift. I have added a few comments to your code above and below will explain.

  (1): when you do a correlated update it is useful to the table alias that you did right here.

  (2): this table statement is not necessary and is the reason why the FIRST deactivation date is selected. The alias that you use (3) refers to THIS table, not the one defined in the update statement. Remove the line indicated by (2) in the FROM clause and a correlated update will happen.

  and secondly why is it to update each row, when I thought that I'm just the lines where the agents are disabled and missions > 7? Pointers on where I'm wrong would be very appreciated. (SQL = stupid query language!) :)

  user8695469 wrote: then why is it to update each row, when I thought that I'm just the lines where the agents are disabled and missions > 7? Pointers on where I'm wrong would be very appreciated. (SQL = stupid query language!) :)

  
  WHERE EXISTS
  (
  SELECT
  a.agent_id,
  count(m.mission_id)
  FROM
  agents a
  /* INNER JOIN AC ON AC.AGENT_ID = A.AGENT_ID */
  INNER JOIN
  missions_agents m
  ON
  a.agent_id=m.agent_id
  GROUP BY
  a.agent_id,
  a.deactivation_date
  HAVING
  count(m.mission_id)>7 AND a.deactivation_date IS NOT NULL
  )
  

  Once again this problem is similar to the question above that a correlation update doesn't work. Test existence of lines in an EXISTS subquery. Since your subquery is not related to the table that you are trying to update, it will be always return a line and, therefore, it returns true for EACH LINE in the AGENTS table. To limit the game to only agents > 7 missions results, you need to add a join condition that references the table in your update statement. I added one above (with comments) as a sample.

  I recommend you look over all material that you have associated with correlated subqueries, including documents that I posted above. This seems to be what you're having the problem more with. If you need me to explain the concept of correlated queries any better please let me know.

  Thank you!

• Need help with the update for my 11 elements

  I have 11 items and just switch to the Canon 7 d Markii and shooting in RAW for the first time last night and the editor and organizer elements does not files because it does not acknowledge the BRUTE of the 'new '... device information I tried the update and he offered only a 7.4 update, where the 7 5 d Markii must at least a 8.7 update... How can I get the latest update if my program does not by itself? I DON'T like the way Canon program from the disk provided with the camera is set for RAW images, and I don't want to have to change all the RAW files to only align my items... I enjoyed how the older my camera RAW files were brought in Editor with the pop-up window which allow me to make changes to quick for photos before opening them in the editor... Yet once I don't like how the Canon window works for RAW images... Thanks for any help on this... Nicole

  Camera Raw 8.7 was introduced in PSE13. If your software is too old to be compatible. Yu have two choices:

  1. Upgrade to the latest version PSE14
  2. Converting your CR2 for Adobe (DNG) Raw and DNG files will work with PSE11

  The Adobe's DNG Converter is free, and you can batch process all of a file CR2 by selecting a source folder and destination folder.

  Download the latest DNG Converter 9.6.1 Mac | Win