do NoClassDefFoundError error if the class definition exists in POT

Similar Questions

• Classification error. The class begins is greater at the end of the class.

  Hello

  I am looking for a solution to an error that doesn't make much sense to me:

  Error in (online: 75, column: 3):

  Classification error. The class begins is greater at the end of the class.

  It seems that when I call the VBS attached on the PDM also attached. Tiara 2012. The index file does not make through the system of download here.

  It seems to be triggered by funtion ChnHistogram() and the help page says something about ClassBegin/end being "global settings". What do these? Where we fixed them.

  Thanks in advance for clues.

  Hey cubz,.

  script is great for debug it quickly.

  The problem is caused by the ChnHistogram 75 online. It happens in the 3rd iteration of the loop to the detour.

  The issue seems to be the ClassBegin or ClassEnd parameter. I think the error message should tell you that ClassBegin > ClassEnd, but this needs debugging later.

  Best regards, Stephan

• ApplicationDomain - sister, the child and the class definitions

  I have 4 swf files: A.swf and B.swf, C.swf and D.swf.

  1 A.swf loads B.swf into the same applicationDomain using ApplicationDomain.currentDomain as a parameter for the LoaderContext object, which means that all the class definitions that b.swf are added to the field of A.swf. Fix?

  2 A.swf loads C.swf using the default settings for the loader, which means that place C.swf in a child domain of A.swf. Fix?

  3 C.swf load D.swf using new ApplicationDomain (ApplicationDomain.currentDomain) as a parameter for the LoaderContext object. Now, here's the real confusion in my head. D.swf is loaded in this way in a child applicationDomain of .swf 's, or a child applicationDomain of .swf C?

  I am confused it is because the docs say that ApplicationDomain (ApplicationDomain.currentDomain) new place the swf file loaded into a child domain of the domain of application of the loader, which would indicate that the D.swf is loaded in a child of C.swf domain, however ApplicationDomain.currentDomain is a constant which I guess is defined in the field of system application, which means it would be inherited to all the loaded swf which means that the constant always contains the same value? In other words, saying new ApplicationDomain (ApplicationDomain.currentDomain) would be equal to put the swf file loaded into a child application domain of the first loaded swf (A.swf in my example above) instead of C.swf file. This hypothesis is correct?

  I ask this because I would like to get to a point where I have class definitions in B.swf, which would then be used by the D.swf (of the substitution of any definition D defines with the same class name) since B.swf was loaded in the same field with A.swf, but C is loaded into a child domain, which, in turn, load D. But for some reason I can't seem to get this to work. Suggestions?

  I hope it was not too complicated be left unanswered

  C must inherit from the definitions of both A and B.

  loadForCompatibility place the SWF file as a brother.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Error 5000: The class 'Particle' must subclass 'flash.display.MovieClip' because it is linked to a symbol in the library of this type.

  Running Flash CS3, I looked at the tutorial from lynda.com on strengthening the systems of particles in ActionScript 3.0 to create a few sparks shooting in an animation.  I'm stuck to what I think is a point really basic, but I can't seem to cross it.  Basically, all I'm doing at this point is to create a class called particle (that I'll learn to do things that the particles to make a little later) bind it to a MovieClip on the stage in my .fla file and use the function to update the particle to move it around the stage in a way defined in the instance (so I can later give properties of different movement to) each as an instance generated the MC).  I know there are easier ways to accomplish my basic task without loading an external module, but this seems to makes it so I have to hurt something very simple, that I can't see so I thought I'd post the code here and see what I'm missing.

  I start with a file called Particle.as in the same folder as my file Test.fla Spark.

  In Particle.as, I have the following code:

  package
  {
  import flash.display. *;
  
  Particles/public class extends MovieClip
  {
  public xVelocity:Number;
  public yVelocity:Number;
  
  public void Particle()
  {
  xVelocity = 0;
  yVelocity = 0;
  }
  
  public void update (): void
  {
  This.x += xVelocity;
  This.y += yVelocity.
  
  }
  }
  }

  So, I declare that all the particles are built with no movement, but if they are explicitly granted an x or y velocity, they will pass by there a lot when updating the instance function is called in the timeline panel.

  Then in my file Test.fla spark, I have a small shape in a MovieClip called Spark.  In the properties of binding of spark, I chose to export for ActionScript and export in first frame.  The class is called Spark and the Base class is the particle.  For testing purposes, I dropped an instance on the stage and called spark.  Then in the layer actions in the first image (the timeline is just the spark layer and the layer actions, a long frame each with no "stop();" so it should run forever), I have included the following code:

  spark.xVelocity = 5;
  spark.yVelocity = - 1;

  function updateSpark(event:Event):void
  {
  Spark.Update ();
  }

  addEventListener (Event.ENTER_FRAME, updateSpark);

  Is what it seems that this should be on every Flash ENTER_FRAME should call updateSpark, which is a function that handles the event update() for the instance of the spark which is a movieclip instance that has an update event that moves x and y of the position of their relative velocity variables.  It seems simple enough to me, but when I ctrl-enter to test the movie, I get the following compiler 3 errors:

  Particle.As line 1: 5000: the class 'Particle' must subclass 'flash.display.MovieClip' because it is linked to a symbol in the library of this type.

  Particle.As line 7:1071: syntax error: expected a keyword (for example function definition) after the public attribute, not xVelocity.

  Particle.As line 7:1084: Syntax error: expecting rightbrace before the semicolon.

  Since I imported flash.display. * and declares the class public particle so it extends MovieClip I have no idea why I get this error of 5000.  I see this issue come up a lot when searching Google and forums, but none of the resolutions that I could find have suggested an approach that applies to me or solve the problem.

  Any help to fix this would be appreciated.  I enclose a zip of the FLA a files as described above in case there is something in the settings of publication that I messed up inadvertently.  In addition, if you can get this to compile without error, then the problem may be due to my Flash CS3 Pro install which will result in the problem isn't with my code and start looking at me in a different direction.

  Thank you

  Scott

  Yes, 'var '.

• PES 9. impossible to uninstall; Error 1316: The file already exists

  I can't uninstall Photoshop Elements 9 on my system running Windows 8.1. When I use the Windows uninstall program, I get a message asking me if I want to delete PES 9, and when I confirm that I am, it gives an error message #1316: program already exists. I know there are, that's why I want to remove it and install a newer version! I tried to re - install, disable and reactivate without success.

  Hello

  Please find the steps to manually remove the PES 9.

  https://helpx.Adobe.com/Photoshop-elements/KB/manually-remove-Photoshop-elements-9.html

  I hope this helps.

  Kind regards

  Vivet.

• ERROR 2: The class or interface 'Event' could not be loaded.

  Hey, I'm new to the Forum and I have problems with Flash that comes, I can't fix. I have this error that tells me how "the class or interface 'Event' could not be loaded. The error is on the 5th line of code:

  1 stop();

  2

  3 addEventListener (Event.ENTER_FRAME, preLoad);

  4

  5 function preLoad(e:Event):void { }

  6 var bytestoLoad: Number = loaderInfo.bytesTotal;

  7 var numberLoaded:Number = loaderInfo.bytesLoaded;

  8 if(bytestoLoad == numberLoaded) {}

  9 removeEventListener (Event.ENTER_FRAME, preLoad);

  gotoAndStop (2);

  } else {}

  _root.preLoader.preLoaderFill.scaleX = numberLoaded/bytestoLoad;

  _root.preLoader.bytesPercent.text = Math.floor(numberLoaded/bytestoLoad*100) + '% ';

  }

  }

  I know that the code is AS3, but I can not pass by atm AS3 and I need the same code, but for AS2. So, can someone convert this for me? Moreover, it is supposed to be a preloader and I put this on the 1st frame. So I have extensions (.as), just the .fla file.

  Also, I use the newest Flash, Adobe Flash CS6.

  The Flash version has nothing to do with the things works or not.

• Flex Builder detects more errors against the definition of the Array class.

  Hello

  I don't know if this is the right forum to post this problem, but here goes.

  I've been developing an application using Flex Builder 3. Today, I met a strange problem. When I use a table variable in an Actionscript class, the compiler detects more errors against the class definition. I have only encountur this behavior with the Array class. Other classes of higher level, seem to work. F.i. I can insert the following text in a function:

  var a: Array = [1, 2, 3];

  var i: a.Len;

  After construction, I get no error. When I run the application, the variable I is set to 0.

  I tried to clean up the existing project. I created a new project in flex from scratch. The problem remains.

  I did not have any updates lately, f.i. flash player, java,... the development environment has not changed as far as I know.

  Can someone give some advice about this problem? Thank you.

  Kind regards

  Wim.

  The table is a dynamic class, as an object, which means that it is perfeclty happy to return values for properties that have never put. These values will be "undefined", which, when converted to an integer, turn into 0. This is the kind of unfortunate behavior, but there is no way to get around.

• Could not import the class with CFCS

  I created a swc file.  I can import most of her classes in my project, no problem.  A single class, however, simply will not import.  I tried to copy the swc directly in the project, citing computer source folder, etc.  No dice.  The EFA relies very well so there is no error in the class.  The first lines of the class like this:

  package com.thismoment
  {
  import flash.events.Event;
  SerializableAttribute public class TakeEvent extends Event {}

  I should be able to import com.thismoment.TakeEvent; right?  It does not work.  I get "1046: Type was not found or is not a compilation constant: TakeEvent.»

  How can I find what is happening?  Is there a way to clear all the classes in a swc?

  Sorry if it's repetitive, but you confirmed that the class is visible outside the CFC? In the project "thismoment" go to your Flex Library Build Path settings and make sure that "include all the...» "is selected or that"TakeEvent"is selected in the tree.

  See attached screenshot.

  Jason San Jose

  Software engineer, Flash Builder

• where is the class = "formlayout?

  Hello
  "I have a page that is source has a table definition with class = 'formlayout' and < link rel ="stylesheet"href="/i/themes/theme_6/theme_3_1.css "type =" text/css"/ >
  But I could not find the class definition in theme_3_1.css
  Anyone knows where is this class defined?
  
  Thank you

  FormLayout is a class that applies to all the tables of form layout generated by the engine of the APEX.

  It does not appear to be used as a CSS selector by one of these themes (at least in 3.2).

  It is there to provide a selector CSS and Javascript for these areas generated by APEX that would be otherwise difficult/impossible to select (at least in some versions of some browsers).

  Previous discussions where it has been used for various purposes custom:

  Re: How to add attributes to the table to start the stop table html element
  Re: Expand the text field
  Re: Adding an image to the logon screen

• Error 1172 tries to use the class mx.controls.List

  I'm writing code Action script in Flex Builder 3 but I'm unable to use some of the classes in the mx package. When I import like this:
  
  Import mx.managers.PopUpManager;
  Import mx.controls.List;
  to import flash.display.SimpleButton;
  
  SimpleButton imports fine but for PopUpManager and list control, I got these errors:
  
  1172: definition mx.managers:PopUpManager could not be found.
  1172: definition mx.controls:List could not be found.
  
  Other controls in the mx package seem to be available as mx.managers.IFocusManager (as well as three other mx.managers interfaces.
  
  Why the part of the mx package is available?

  Problem solved now. It turned out that I could not access the complete packages because my project was an ActionScript project instead of a Flex project.

• I deleted two e-mail accounts in my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  I deleted two e-mail accounts in mail on my iMac (El Capitan). I have reinstalled the first without problem. When I tried the second, I got an error message that the account already exists. Any suggestions?

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• LabVIEW:EXE generates the error 1003 calling plugin with the type definition

  Hi all

  I am running LV 2012 on a Win 7 machine. I had this same problem with LV 2011, so I'm sure that's not associated with version/upgrade.

  Go to a LV-built EXE, I try to call a dynamically loaded Subvi. I did it several times with success before, so I think I know how. I prefer to use the call by reference, but I get the error 1003 Open Ref VI (with the type specifier). If I use the type specifier, can I open the Subvi, but the State is listed as 'bad '. Then, I went to recursively through all the subVIs (~ 25 in total) and concluded that the only item with a status of 'Bad' was a type definition.

  I checked several times, several different, that all ways the subVIs (and the definition of Type 'bad') are available to the Subvi dynamics. I did that the type definition is correct. I have also made sure the subVIs are stored as .VI files in the same directory and not within an EXE file. When I try to run the VI run call node, I still get the error 1003. I checked the path that displays in the error dialog box is the exact path for the Subvi (it would be for other VI properties and methods working properly).

  Why can't I run a sub - VI loaded dynamically from an executable if it has a type (a group of 3 trails) as output parameter definition?

  I just tested an idea: rename the library from project to project A create script. Now when it loads, it does not disturb what he must internally with externally called Subvi (dynamic). It worked the first time!

• TestStand Java - 1500 error cannot find the class

  Hello world

  I use Java 1.7 and TestStand 2010.

  I try to add a java class in the computer example folder and call the method.

  The java class is just as below, because I'm just trying to call my own java class.

  I put the class path to start the JAVA virtual machine in the directory where the example of the computer (which is also the directory where I put my java class).

  TestStand can call methods of the computer, but not mine (received the error 1500 error cannot find class). I put my my java method call among calls for default computer example.

  Also I read similar topics, but again I can not resolve the error.

  Where is the part that I'm bored, in fact? Please share some ideas.

  Note: I even try to leave the empty class path, but TestStand can always call the methods of the computer. Why?

  ----------------------

  public class TestJava {}

  Public Shared Sub main (String [] args) {}

  }

  public String returnString(boolean a) {}
  Return "success";
  }

  }

  To load a class which is within a package, you can use the package rating (or change the example in order to to use). The path to the class is passed directly to the JAVA virtual machine to load the class, but really what is necessary is the package from the class path, including the full path to the class.

  This means you need to do the following:

  1 set the class path in the base directory where you created all your classes, if you have the following structure:

  • MyFile.java
  • builds
  • • MyPackage
    • • MyFile.class

  You must set the classpath in the builds directory

  2 when you set up your steps, you must set the path to the class in your steps from Java to MyPackage/MyFile.class (note the separator is a forward slash, not used Windows backslash, then the Browse button is not quite help with that).

  Another important thing is that when you set the classpath variable you remove the normal Java class path, if you are using Java classes from the library by default, you may have to add \lib\rt.jar

• Error 123: Timeout to libFrame_OpenPageRef.vi while trying to open the properties of the class

  I get an error message 123: time-out when you try to open the class properties dialog in a project.

  Here is the image:

  

  Anyone have any suggestions on how to fix this? I need to be able to change the class inheritance and other properties. When you open the properties in a new (empty) project, the dialog box opens very well (as slow as usual, that is). The project contained in this class is very large: something like 1200 live and classes 50 +.

  dthor,

  Another possible workaround solution, which I think you discussed previously, is to add the class to a new project file and change the properties of the class through this project. I change the properties in a new project will change the properties of your project to VI of 1200. However, you will not be able to change properties in the new draft, while the old project is still open.

  Sorry for the inconvience, R & D is trying to solve this problem.

• When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  Ideas:

  • When you install the 2007 Microsoft Office Suite Service Pack 2 (SP2), I still received the error code 646... I tried to download the RegCure as advised, but the problem still exists... Please help me with this problem... Thank you

  I tried to download the RegCure as advised, but the problem still exists...

  Who advised you to 'download... '. RegCure? Doing so could only worse issues! If you ever think that your registry database must be cleaned, repaired, boosted or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions.

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft