Error 1172 tries to use the class mx.controls.List

Similar Questions

• Error when trying to use the CSSFormatResolver class in Flash CS4

  Hello

  While he was trying to work with a version revised class CSSFormatResolver (created by timoisalive and posted on this thread), the compiler threw the following error:

  1061: call to a getChildAtIndex method maybe not defined through a reference with static type flashx.textLayout.elements:FlowGroupElement.

  The method originated in the CSSFormatResolver class invalidate() method.

  public function invalidate(target:Object):void {       

  delete _textLayoutFormatCache[target];      

  var blockElem:FlowGroupElement = target as FlowGroupElement;      

  if(blockElem) {          

  for(var idx:int = 0; idx < blockElem.numChildren; idx++)                          invalidate(blockElem.getChildAtIndex(idx));          

  }      

  }

  If I comment the loop for, can I get the sample runs, but which seems to seriously affect the way in which the styles are interpreted...

  The example files are listed below.

  Any suggestions?

  Thank you in advance.

  There is no FlowGroupElement.getChildAtIndex method.

  There are these two:

  		getChildAt (index:int):element FlowElement Returns the child of the FlowElement element at the specified index.	FlowGroupElement
  		getChildIndex (child:element FlowElement):int Searches in children for the specified element FlowElement object and returns its index location.	FlowGroupElement

  I think you meant getChildAt.

  Hope that helps,

  Rich

• I have windows vista and I had to use my recovery disk, but an error came as it ended. I tried to use the menu options of recovery but now she plays as if I had no drivers. What should I do?

  I used my recovery discs and some sort of error came. so, it has not fixed the computer. so I think that some how drivers were not loaded. However what seems to be a driver came when I press my f12 button to use the system recovery options menu. but I insisted on using it, and another box came to tell the software installation media or something to use to load the drivers. I also tried to use the Startup Repair tool restore and system by surprise that I have on an external drive listed under windows backup care but nothing has worked. I don't know anything else to do.

  1. Open the 'computer '.
  2. Right-click on the drive in question
  3. Select the tab "Tools".
  4. In the error-checking box, click .

  Well you can suffer the consequences of not running it who are often worse. CHKDSK found and try to
  repair disk problems, it does not really create them.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

• Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi, I am trying to install Adobe Creative Cloud and I get error 43. I tried to use the Adobe cleaning tool and uninstall but nothing has changed. What can I do?

  Hi carlottav39691716,

  Please see the following links:

  Error 43 - I can't download any adobe apps CC or creative cloud Manager

  Creative cloud, re-install-Dungeon error 43

  Error in downloading, installing or updating Adobe Creative Cloud applications

  Let us know if that helps.

  Kind regards

  Sandrine Bani

• error when trying to use ' {' in the query}

  Hello
  
  The below mentioned query gives error while trying to use ' {'}
  
  Query:
  
  Select s, table x (SEM_MATCH)
  "{ ? s RDF: type < http://www.cs.com/sbip/dwh/mdm/data_modeling#Base_Term >.
  ? s? p? x}',
  SEM_Models ('foundation'),
  SEM_RuleBases ('OWLPRIME'),
  SEM_ALIASES (SEM_ALIAS ('dm', 'http://www.cs.com/sbip/dwh/mdm/data_modeling#'),
  ((SEM_ALIAS ('Nice', 'http://www.w3.org/2002/07/owl#')), null, 'INVALID' value))
  where regexp_like (x, 'Customers', 'i');
  
  Error details:
  
  ORA-29532: Java call terminated by eception Java exception: oracle.spatial.rdf.server.TokenMgrError: lexical error at line 1, column 1. Met: "{" (123), after:
  ORA-06512: at the 'MDSYS. RDF_MATCH_IMPL_T', line 178
  ORA-06512: at the 'MDSYS. RDF_MATCH_IMPL_T', line 67
  ORA-06512: at line 4 level
  
  I can't use the query filter Option.
  
  Any solution?
  
  Please let me know what I need to apply a patch?
  
  Note: I use Oracle Database 11 g Enterprise Edition Release 11.1.0.7.0 - 64 bit Production
  
  Kind regards
  Kouadio.

  Hello

  For OPTIONAL in 11.1.0.7.0 support, you need the following patch

  Patch 7600122: SYNTAX of BRACE, VIRTUAL MODELS, NETWORK INDEX AND HINTO SUPPORT FRAME

  Support for filters SPARQL in SEM_MATCH is not available for 11.1.0.7.0. You need version 11.2.0.1.0 or later for the FILTER support. With 11.2.0.1.0, we recommend that you apply our latest game patches:

  Patch 9819833: TECHNOLOGY SEMANTICS 11 G R2 FIX BUNDLE 2

  All of the above fixes are available through My Oracle Support.

  Thank you
  Matt

• Use the class with the same name as the default Package class

  I am upgrading a project to Flash CC and to do in the old class JSON in com.adobe.serialization.json. When I compile, I get an error "1061: call to a possibly undefined method to decode a static type reference Class ' because he's probably trying to use the default package latest JSON class rather than com.adobe. I have the import statement in my class, 'import com.adobe.serialization.json.JSON', but I guess its audit against the default package and gives me a compilation error when I call "var parts: Object = JSON.decode (jsonData);

  Change the name of your custom class or change your settings (to use fp before 11) publication.

• Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the drop-down list box. Any ideas on how to solve this problem? I tried to use the toolbar Customize to drag an icon to the toolbar.

  Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the mailbox (impossible to select) drop.  I tried to use the toolbar Customize to drag an icon to the toolbar, but it doesn't work anymore. Using Mail 9.2 and OS X 10.11.2.  Any help is appreciated.

  The Send button will not be activated unless the message can be sent. Are you sure that you have entered a recipient and the account is online?

  The connection doctor (window menu) displays errors.

• I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success.

  original text: P17.sys

  I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...

  Hello

  1. What is the exact error message you get?
  2. Are you not sound on the computer or Rocketfish?

  If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Otherwise, I suggest you to give us more information about the issue, so that we can help you better.

  It will be useful.

• Hard drive erased, now receive the error occurred trying to read the boot configuration

  I erased my hard drive but when I restarted my computer, it said that there is an error then produced than that to read the boot configuration, I tried to use the windows vista download recovery disc but when I turned on my computer nothing the same thing appeard. HELP PLEASE!

  * original title - I erased my hard drive but when I restarted my computer, it said that there is an error then produced than that to read start configuration.*

  Here's how to use the Vista startup repair disk. is NOT a Vista reinstall disk.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to reinstall Vista:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• an error occurred trying to access the service

  I wonder why I bought a year subscription to Adobe Reader to convert PDF files to Doc files, when it WORKS and no one seems to be able to help me! I'm on a Mac Book Pro with Yosemite (do not upgrade it slows down your Mac evil) and whenever I try to convert a pdf file to a doc I get "an error has occurred while trying to access the service", can someone help me please?

  Hi Cedric,

  The customer service number is 800833687

  Is the direct link to chat: http://adobe.ly/19llvMN

  You must click on 'Still need help' to start the chat session.

  You get this error: "year error occurred trying to access the service", all trying to access the service by the reader.

  Try to use the link: https://cloud.acrobat.com/exportpdf log in with your Adobe ID and try to convert a pdf file to doc and check if it works for you.

  Agress,

  Rave

• "There was an error while trying to delete the snapshot"

  I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error

  "There was an error while trying to delete the snapshot

  Impossible to clean deleted files:

  The specified virtual disk needs to be repaired.

  It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?

  Thank you very much

  MacGruder says:

  I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error

  "There was an error while trying to delete the snapshot

  Impossible to clean deleted files:

  The specified virtual disk needs to be repaired.

  It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?

  Firstly it goes without saying, but I'll say it anyway...  Always back up all of the Virtual Machine with the Virtual Machine within the OS, not suspended, and Fusion to stop closed before trying to make repairs on a virtual hard disk.

  This may not work if it's the basic disk that needs to be repaired and the Virtual Machine has snapshots, but I go through it.  You can try to use "/ Library/Application Support/VMware Fusion/vmware-vdiskmanager ' with the '-r' option.  Note: If the basic disk do not while snapshots are at stake, because it will cause more problems so my suggestion is first try to create a new basic without snapshots disk using the information below (see another option).

  Also one of the reasons to delete a snapshot may fail if there is no adequate free disk space for the operation ends so make sure you have a lot of free disk space.

  Another option would be to create a new basic disk, and then use dd by using an Image of CD/DVD/ISO Linux Live in the image of the old drive so written delta in snapshots to a new basic disk.

  I like to use the ISO Image of KNOPPIX_V5.1.1CD - 2007-01-04 - IN .iso to start the Virtual Machine and use dd to leave because it works well with VMware SCSI virtual hard disks.

  Also in Fusion 2.x, configuration the target Virtual Machine's .vmx file must be changed manually to have the present following parameters when using Knoppix.

  usb:0.deviceType = "mouse"
  usb:0.present = "FALSE"
  mouse.vusb.enable = "FALSE"
  

  Note: The first two parameters may already exist but if the other exists and is set to true, then set it to FALSE and the third are probably already so just add it.

• I'm having problems trying to use the

  IM Tony, I have an iPhone 6 more and since the update, I tried to use the animated messages but seems that theres also problem with the power button. The arrow leaves no other icons appear.

  Hi Indestruct1,

  I understand that you encounter some problems that can use the new screen effects and effects in the bubble Messages application. I have updated to iOS 10 as well and I love the new effects. I'll be happy to review some information for you.

  Use of the effects of message with iMessage on iPhone, iPad and iPod touch, this article stipulates that

  You need iMessage to send from the effects of the message. If you are unsure if you use iMessage or SMS/MMS texts, learn the difference. If you cannot send or receive effects of bubbles, make sure that you haven't reduce Motion activated.

  The same applies if you can't send or receive screen effects, check that reduce the Motion is turned off.

  Thank you for bringing your question in Apple Support communities. Have a great weekend.

• I've been using Foxit reader and uninstalled, how can I get firefox to use Adobe now? (He keeps trying to use the deleted program)

  I tried Foxit reader to see if I liked it better than Adobe decided to remove it. But now he keeps trying to use the deleted program and I can't get firefox using Adobe. I've uninstalled and reinstalled firefox and Adobe reader and the problem is still there.

  http://support.Mozilla.com/en-us/KB/managing+file+types

• LabVIEW 2013: An error occurred trying to load the assembly

  Hey all,.

  I'm trying to load a dll .NET 4.5 in LabVIEW 2013.

  When I place one of the screws .NET and try to select the one I am after it says "an error occurred trying to load the assembly" and will not let me load it.

  I also tried to import the dll, but who also gave errors.

  It's defintely a 4.5 as the reflector .NET .NET dll gives me

  [assembly: ComVisible (false)] [assembly: TargetFramework(".)] NETFramework, Version = v4.5 ", FrameworkDisplayName =".NET Framework 4.5 ")] [Assembly: SecurityRules (SecurityRuleSet.Level1)] [assembly: SecurityPermission (SecurityAction.RequestMinimum, SkipVerification = true)] '"

  To try to work around the issue of the import, I added the following to my LabVIEW.exe.config file

  
  
   
     
   
  

  but it made no difference.

  Any suggestions? All the things I've read so far are for 2010.

  SOLVED!

  I installed a 64-bit version of LabVIEW and it works. HUZZAH!

• had two versions of the program, uninstalled oldest, tried to use the one installed but had windows message reconfiguration.

  had two versions of the program, uninstalled oldest, tried to use the one installed but had windows message reconfiguration. nothing seems to be the case so I cancelled the operation. Now, I can not reinstall or uninstall for the program is open. Help!

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.  Good luck.