Do not communicate the printer and the laptop

I have a Samsung laptop and a printer Epson Workforce 630.  It is put in place for the WiFi,

However, when I try to print nothing prints, the laptop on the screen of the device has a yellow triangle, and when I troubleshoot it says cannot find the Photosmart Premium 309 g - m.  I removed all HP printer programs, on my PC.

Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

Remove the driver current completely and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

Tags: Windows

Similar Questions

  • My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7.

    My laptop (Dell Inspiron only 3 months old) is displayed on an external monitor, but not on the laptop screen. I am running Windows 7. It was running and display very well last night. When I turned on this morning the monitor lit up but show just a gray-white screen and no office. When I attached an external monitor, I could see desktop and all other programs and Windows 7 routines seem to work very well.

    MB

    Press the Windows logo key and the p key, and then set up the PC to display on the built-in monitor only cycle through with the arrow key.  You can make this Store if you want - key Windows-p, right arrow once, paused for a few seconds & the laptop monitor should then appear normally.

    You can do so at the end of each session using the external display while you are ready for the use of the laptop on its own later.

  • My HP6500 wireless printer does not work. get the message that my network not recognize my printer and need to start OneNote before it will work

    My HP6500 wireless printer was working well until 2 days ago.  Now, I get a message that my network does not recognize my printer.  I also have a message that says I need to run OneNote before it will work.  any suggestions on where to start

    Hello

    1 have had any changes made on the computer before the show?

    2. What is the full and exact error message?

    Method 1:

    I suggest review the links and try to run the troubleshooter and check if it helps.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Method 2:

    Check out the links and check if that helps:

    Network and wireless printing problems

    http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodSeriesId=3795309&prodTypeId=18972&supportTaskId=42468

    Solve a problem

    http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodClassId=-1&prodTypeId=18972&prodSeriesId=3795309

    Let us know if it helps.

  • Internet not working not but the laptop says it's connected to the modem and "Internet access".

    My laptop says it's connected to our modem and having 'Internet access'. However, I can't use the Internet on any of my browsers. I tried to turn my Wi - Fi, and who have done nothing. I also tried to restart my laptop and modem, but who didn't do anything either. I checked the Device Manager to see if the NETWORK card worked properly. It said it was working fine. Unless it's lying to me. I plugged in an Ethernet cable to my laptop, but I still couldn't get on the Internet. I ran my computer in safe mode with networking with an ethernet cable but still could not access the Internet. I don't know what the problem is.

    I used troubleshooting and that's what he came back to me:
    "The connection between your access point, router or cable modem and the Internet is broken."
    I did what he told me to and restarted my modem... once again. It did not work.

    Does anyone know what I can do to fix this?

    I have the same problem.  My internet connection seems fine.  I can connect to the internet on my laptop to the company, xbox 360, roku and my cell phone, but not my laptop from Sony.  When I check the connection it says its fine but when I run a diagnostic it says "the DNS server is not responding."  I checked with my cable company and that they 'refreshed' my signal, but it would not connect.  Even than your wi - fi network or directly with an ethernet cable.

    If someone could help us both appreciate it.

    Thank you

    KD

  • HP 14-g003AU Notebook PC: brightness adjustment does not not with the laptop of HP 14-g003AU

    I just bought HP 14-g003AU Notebook PC and installed windows 8.1.

    I can see brightness setting botton, but it does not work.

    In addition, @ key is misplaced with '. '.

    Someone give me please an idea to fix it.

    Hello

    Regarding the brightness controls, try to use Recovery Manager to reinstall your original graphic driver - how to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

    Recovery Manager - Windows 8.

    After reinstalling, restart the laptop.

    As far as the keyboard is concerned, it seems that if the incorrect page layout has been selected - IE if @ is on the 2 key must be set to the United States and so " " "is on the 2 key, it must be set to UK - you can change your keyboard layout, as described on the corresponding link below.

    Change of keyboard - Windows 8

    Kind regards

    DP - K

  • "Do not put the laptop near devices such as TV speakers/fridge that generates a strong magnetic field" what is the effect of this?

    Original title: do not put the laptopn close device suas: a fridge that generates a strong magnetic field of the speakers on the TV? What is the effect of the magnetic field, causing the laptop?

    Do not put the laptopn close device suas: a fridge that generates a strong magnetic field of the speakers on the TV? What is the effect of the magnetic field, causing the laptop?

    Hi stuckfree,

    Magnets are used in computers for various purposes, for example in the hard drives. Several parts of a laptop computer may be affected by a magnet. More commonly known as material element affected by magnets is the hard drive.

    That is not exactly true. Hard drives are well protected against most of magnetism, and most even use a magnet to turn, but many strong magnets and electromagnets can and will damage a hard drive. More likely to be affected is the BIOS of your computer (Input\Output base system) ROM, which shows how to use the basic components and boot into the operating system to your motherboard.

    So it's best to avoid placing computers\laptops close to all these devices.

  • Built-in mic not working not not on the laptop

    Original title: I can only use a microphone when I plug it into the mic on my laptop, but not using the internal mic.

    I can only use a microphone when I plug it into the mic on my laptop. I have a built in webcam and microphone.  the webcam works but the microphone does not work. It is said that the microphone is not connected.

    original title: Windows Audio recording

    Check with the manufacturer of your laptop to see if they have a program to test the microphone.  He may simply have stop working.

  • HP - 15z laptop computer: can not customize the laptop keyboard for HP - 15z computer color

    Please, I would really help this portable individual to have the same exact appearance than that of the binding HP Pavilion computer 15-n209TX portable test - YouTube I like the look of the Pearl White version with the white keyboard range. I see pictures of her on this site but its very difficult to achieve. Whenever I try to get this look with the customization options it will allow you to choose the color of the laptop (I chose White Pearl). But when I sailed until keyboard options there is not, except "keyboard Standard (black) "I looking in the wrong place? ". Anyone know how I can get version White Pearl like the one in the link? Thank you in advance.

    Thanks a lot for your answer. I just got one in the mail after ordering an elsewhere

  • HP pavilion dv6-3031nr: no link between HP printer and computer laptop, even when they both show a connection

    How my printer can work one day and the other day it doesn't.

    I have a HP Pavilion laptop and an HP Photosmart printer.  Both show that they are connected, but the printer will not print. My dvd player want me to transfer pictures and will not read my cd for the printer.

    I have a Photosmart D110a.  The printer prints.  But would not scan.  I went to print and scan on my laptop and tried there.  I don't know what happened, but it is now printing and scanning, but only from my computer.  It seems to change with the times.

    Thank you for responding.

  • HP OfficeJet Pro 8710: HP OfficeJet Pro 8710 print do not tried HP Print and Scan Doctor

    Hello HP Forum,

    I'm new and have read many articles on printing does not. I had this printer yesterday and I was so excited to use it! When came home... DOH! Nothing prints not! So, I used the print and Scan doctor and that fixed it... temporarily. Now it won't print and print and scan doctor said nothing! I printed something this morning, but I saw a mistake, then I went to print it again, nothing would have uttered. I'm getting a little angry that I (May) have lost $170 on this thing.

    I could really use some help please! If not, I just lost $170 on this thing.

    My system is Windows 10 1511 Pro 64 - Bit, and the printer is USB connected.

    Thanks in advance,

    HPOJPro8710

    Edit: I just tried printing HP and Scan Doctor 4.9 once again, now it works again. But this will not last forever, I need a permanent solution.

    Edit 2: I forgot to add that I intend to leave it on all the time. It is good to do? Causing my problems?  My grandparents have their HP OfficeJet Pro 8600 24/7 for I don't know how many years! haha and they have no problem!

    I got a HP OfficeJet 4630 USB connected, and I turned off each time and printed correctly. Only had to fix once with HP print and Scan doctor.

    Hi, seems that your computer is powered off the USB ports to save energy.
    Check in the Device Manager.
    Check under USB controllers.
    Check all USB hub root.

    Select power management and ensure that:

    Allow the computer to turn off this device to save power is DISABLED.

    Use a USB cable of good quality, not more than 6 feet long.

    Connect the 8710 directly to a power outlet wall.

  • Password: can not get in line and my laptop will not accept my password

    yesterday morning I went online with no problems, but when I tried later in the day that my phone does not accept that my password so could not get online - tried again this morning without modification.

    Thank you Mick for your repl to my problem, the problem is I can't on line at all. I use now the phone my wife to try to get help.

    Eddie

    It has nothing to do with getting online with your computer.

    Use portable your wife to read, what you arereading here.

    Everything I told you to do it was to read what was at this link to try a ssolve your problem:

    If you can't do it, comsider reinstall Vista.

    If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

    You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

    • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
    • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
    • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
    • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

    To use system restore to log on Windows 7 or Windows Vista when you lose access to an account, follow these steps.

    Note To do this, there must be a restore point from the system in which the connection was successful.

    1. Insert the Windows Vista or Windows 7 DVD, and restart the computer.
    2. When you receive the following message appears, press a key:
      Press any key to start from the CD or DVD.
    3. Set the following preferences and then click Next:
      • To install language
      • Time and currency formats
      • Keyboard or input method
    4. Click repair your computerand select the operating system you want to repair, and then clickNext.
    5. Click System Restore, and then click Next.
    6. Click on the food that you want to use, and then click Next.

      Note Click a restore point that will return the computer to a State where the connection is successful. After you use the system restore feature, reinstall all programs or updates that can be removed. You won't lose any personal documents. However, you may have to reinstall programs. You may also need to reset some personal settings.

    7. Confirm the disks that you want to restore, and then click Next.
    8. Click Finish, and then click Yes when you are prompted.
    9. When the system restore process is complete, click restart to restart the computer.
    10. Once the computer restarts, click close to confirm that the system restore process has finished successfully.
    11. Use an appropriate method to open a session. For example, log in using an older password, or log in using another computer account.

    After you connect, you must follow additional steps, depending on the scenario you encounter.

    Additional steps for scenario 1

    1. After you log on, change the password for the protected administrator account.
    2. After you change the password, restart the computer. Make sure that you can connect by using the new password.

    Additional steps for scenario 2

    1. After you log on, make sure that each user account can log in using the appropriate credentials.
    2. Change the password for the user account that cannot log on.

    Additional steps for scenario 3

    1. After you log on, use the element user accounts in Control Panel to create a new protected administrator account.
    2. Log in using the new protected administrator account. Then delete the older protected administrator account which has been restored.

      Note For security reasons, do not use the restored protected administrator account.

    Additional steps for scenario 4

    1. After you log on, use the element user accounts in Control Panel to create a new protected administrator account.
    2. Log in using the new protected administrator account.
    3. Change the old administrator account protected with a standard user account.

    Mick Murphy - Microsoft partner

  • This morning update of Firefox has been downloaded but does not restart the laptop. He's trying to start and the lights on the keyboard. He continually tries to restart. The screen is blank. It was working fine until I clicked on restart.

    PC IS A COMPAQ PRESARIO V6000 RUNNING WINDOWS XP

    PC DOES NOT RESTART AFTER THE LAST FIREFOX DOWNLOAD THIS MORNING

    The PC screen does not light and I think he's dead. It can be quite fortuitous, and there may be a hardware failure that he would have stopped working even without the download of firefox. I'll have to consider Repair shop and see if anything can be saved on the hard disk.

    Thanks anyway

    Dave

  • My transcend USB do not open or does not recognize the laptop

    I just purchased a transcend USB and connected to a laptop but will not open... which seems to be the problem?

    Hello

    · What is the operating system installed on the computer?

    · The device is not detected in Windows Explorer?

    Run the fix it and check if this may help: hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us

  • Hard drive does not not on the laptop! 'Insert disc in drive D', disc already inside.

    It works fine throughout, but I went on the creation of a hot spare for my laptop computer and any burning, the drawer open and says disc "Insert blank cd in the drive" even if it already, to tried many disks. Tried other discs, games, etc, do not go or recognize a disc inside.

    When I go to computer-> DVD RW drive and double click on it says "insert disc in drive D".

    Tried almost all of the correction he things here http://windows.microsoft.com/en-US/windows7/search?q=vista%20cd%20dvd%20drive&p=1&prd=

    any help is appreciated!

    http://support.Microsoft.com/GP/cd_dvd_drive_problems

  • Can not use the laptop as Windows 10 use 90% of the hard drive, what can I do in addition to using an external hard drive?

    Dell Inspiron 14-3000 Series

    I have this laptop. My question is why do you want to sell a computer with 32 GB drive hard when you know that the OS will seize 20 GB? How am I supposed to use this computer? I can't upgrade the HD and why I should buy an external drive for a laptop?

    So, I'm totally confused.

    Thank you

    This isn't a real laptop - it is a glorified tablet/internet device.  It is fine as a Windows to replace a chromebook, but forget not run anything challenging about it - it is designed for one purpose: be inexpensive.

Maybe you are looking for