Do not extract the driver install

Similar Questions

• I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  I just installed an SSD on my imac 24 inch 2007 but at the start of the computer does not see the drive. How to use the terminal to look for? Thank you

  Can she be seen by disk utility (and which version of Mac OS X is)

• When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have already a CD in the drive, it can not extract the CD.

  When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have a CD in the drive, it already and can not extract the CD. The air play perfectly to the reader.

  Hello, BGNG,.

  This thread has been created in wrong forum; the Microsoft moderation team has moved this thread on the forums of programs .

• IS does not recognize the drive HARD internal

  I have three, all from a school lab, that have been linked with other positive points and printers.

  They are connected are not together anymore.

  All three have a floppy drive and a HARD drive. Will only boot from the HARD drive.

  At startup, the other two do not recognize their HARD drive and I use ea disk with the system in this regard.

  Since hard drives are not 'seen' I am unable to do anything with them: fix, set up as a boot drive, etc.

  They begin with the usual chimes and the Mac with the question mark, I slip the disk in and they complete commissioning.

  The internal drive spin up and the indicator light flashes.

  They do not show the drive HARD internal on the screen, but will show an external.

  I haven't started to swap parts between the good and the other two.

  Does anyone have an idea on how to activate an invisible HARD drive?

  You will need to use the boot floppy disks to start the machines to run the repair disk, partition and format the HARD drive if it is still functional. Only then can you install Mac OS on the HARD drive. That's all that I remember.

• Satellite A60 do not mount the drive UJDA760

  My Satellite A60 CD-ROM/DVD-ROM drive has stopped working properly. He is more able to read DVD - ROM, a serious problem because the recovery disc is a DVD-ROM.

  I recently bought a replacement drive, the same model as the old disk number. But when I installed it, the computer does not recognize the drive. The drive has power and running disks. The computer does not know it is there.

  Someone has an idea of what can be done to encourage the player from the computer? I updated the BIOS to the latest version, but that did not help.

  I appreciate any suggestions.
  Phil premium

  Hi Phil premium,

  The old drive is recognized correctly in the BIOS?

  I'm not sure but some readers have a rider on the back where the connector is. There you can switch between Master, Slave and Cable Select. Please put the jumper on Master and if it s does not, try the slave mode.

  In the worst cases, the new drive is defective and you must return it to the store and ask for a replacement.

• Scanjet5370C Windows 7 Pro does not see the driver!

  I try to add the scanner Scanjet5370C of my windows XP computer to my new Windows 7 Professional. I downloaded the software from the HP site and restarted the computer. It says device has no driver. I pilot Nations United installed tried to reinstall still not see it. Anyone have an idea what is wrong here?

  Windows Update has not even the driver for this scanner.

  Help!

  Thanks in advance.

  Hi Marcus25,

  Sorry to inform you, the Scanjet 5370c is not supported on Windows 7:

  http://support.HP.com/us-en/document/c03403550

  The driver listed on the HP site is intended for a different model (Scanjet 5590) and seems to be wrongly pposted for your scanner.

  I reported this problem to get this fixed...

  Altthough it is not officially supported, try the of VueScan 3rd party application which seems to support your scanner wthout you had to install the drivers on the computer:

  http://www.Hamrick.com/VueScan/hp_scanjet_5370c.html

  Shlomi

• Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210

  Can not find the driver of scan to PRINTER ALL-IN-ONE KODAK ESP 5210. Device Manager says last driver is installed.

  Moved from feedback

  Original title: scan driver

  Hello Timmy,

  Please take a look at the following link for the driver\firmware for your printer.

  KODAK ESP 5210 All-in-One Printer Firmware - WINDOWS operating systems

  If this is not enough, you may have contact with Kodak support for the same. Thank you.

• Win XP will not find the driver for my Canon Sx10 camera.

  Windows XP will not load the driver for my Canon SX10 camera. I had the camera for 3 years and have never had a problem with this load. I reinstalled XP and the same problem. Windows recognizes the camera but will not load the driver for it.

  I'll in Device Manager through the update hardware wizard I have try to install the driver manually, but I don't get the option of all available drivers.

  There is no drivers for this camera online, because I thought that Windows has the driver for this device.

  Thanks for the help,
  Ian

  Thanks for the reply. I reinstalled windows and it works fine now. I didn't want to go through the hassle of reinstalling everything.

  Ian

• HP Z820 - SSDDashBoard can not see the drive

  I just purchased & installed a reader of 960 GB attached to the SATA III connections on the card mother HP Z820.  Disk Manager 10 windows sees the drive, I am able to use it wisely, but the dashboard software will not recognize the drive.

  The clues, please?

  Unfortunately Yes. You can try to update the SATA drive and see if you can get it to show a normal SATA, but it it's SCSI go it won't be able to see.

• ProBook 645 G1: Network device did not have a driver installed pci\ven_10ec & dev_8168 & subsys 1992103C REV_0C

  Hi all

  I've installed WDS/MDT2010 to deploy the Windows & OS, it works with most of my models of HP laptops.

  When I deploy ProBook 645 G1 it gives me error foloowing.

  A connection to the deployment share could not be established.
  The following network device did not have a driver installed pci\ven_10ec & dev_8168 the & subsys C 1992103 & REV_0C
  Retry: try again to connect to the deployment share or give up.

  I have download all the network driver available for this model and imported in out-of-box driver, updated sharing deployment and run again but still having the same issue.

  Grateful if someone can help me on this.

  Thank you

  Hello:

  The only suggestion I can offer is to try the driver directly from Realtek.

  Second driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

• the location does not contain the driver * for required processor architecture

  I'm trying to set up my hp laserjet as a shared printer on my network domestic. The printer is attached to a Win7 x 64 machine, all the other computers on my network are XP 32. When I try to load additional x 86 drivers on Win7 computer, I get the message: "the specified location does not contain the driver hp LaserJet 1320 PCL 5 for the architecture of processor required. I get this message, no matter which driver I try. I have tried several different choices of drivers XP 32. What I am doing wrong? where can I find the correct driver?

  Everyone,

  After the announcement yesterday, all of a sudden today, in Windows Update, there is a new driver PCL 6, Microsoft Update. I had to uninstall the printer in order to obtain this update to install. After this update, the shared property now would allow me to install the x 86 drivers. This update was not there yesterday, got to admit that Microsoft has acted quickly on this one.

  Brian & Jack thanks for trying to help!

  Ken

• BIOS Inspiron 2305 does not detect the drive in ahci mode

  The hard drive in my Inspiron one 2305 crushed and I tried to install a 500 GB Seagate Barracuda drive.

  The Bios does not detect the drive. I noticed that the SATA in the BIOS mode option has been put on AHCI. I changed the ATA mode and the BIOS has detected the drive.

  However when I try to install a clean version of Windows 7 (Dell OEM disc), to halfway to the installation Setup will fail. I noticed that the reason why it will fail, is that the installation process now does not see the hard drive.

  Can someone tell me what steps to take to do the installation?

  theFlash1932 and natacuk4

  Although I was not able to swap the Sata cables as natacuk4 suggested; It looks like just unplug and reinstallation of cables Sata what it did the trick!

  I was able to boot the system several times and it seems that everything works fine.

  Thank you guys for helping me solve this problem!

• have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

  How do you try to install the driver? Is it through the disc or via the site?

  Method 1: Use a troubleshooting tool to solve the problem:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: temporarily Disable the Antivirus and firewall and try to install

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• By clicking on add to Firefox to download the module anything if you do not click the button install?

  By clicking on add to Firefox to download the module anything if you do not click the button install?

  Clearing history removes nothing downloaded?

  Files can still be in the cache memory or disk if you do not install the extension.

  You can probably use clear recent history to remove the last hour, if you want to remove these files.

  • https://support.Mozilla.com/kb/clear+recent+history