Do not get data in the target after the beginning of the session.

Similar Questions

• The lateset, 2015.5 edition, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  The last edition, 2015.5, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  Yes, copied files from Nikon NEF, DNG.

• VI do not transfer data from the instrument.

  Hello to all who are interested.  I'm working on an instrument driver for an Agilent D3000A generator of signal (E4432A) trying to get the generator to sweep the amplitude of - 30dBm to-75dBm and then come back in a loop.  The loop is in a structure of the event and is called by a switch on the front panel.  When the switch is selected event triggers and loop information is passed to the VI.  The problem is the 'Sweeping Steps' VI does not use data from the number of points in the sweep and pause at each time and the tracks of the loop as the amplitude is just switching between the min and Max amplitude levels.  But once I have stop the generator program will continue sweeping (only in a sense) but the correct time and the number of points.  When I use the spy "measurement and Automation Explorer" program AND I do not see that the data are transferred in the instrument.  I don't know if the Subvi the execution order is correct and was amazing if someone could take a look and let me know if I have them in one order incorrectly.  Could not find an example of this type of program examples of the driver so there is little help.  I joined the program and the driver of instruments for your comment, then please take a look and send any information you think will help me to get this working properly.  I have also tried to run the single sweep mode sweep and have just the change of direction for the sweep to the other side of the ramp, but I still get the same results.

  The generator has 15th and ONU3 options.

  I, m using LabVIEW 2010 on a Dell Dimension 2400 running Windows XP and service pack Version 5.1.2600 Service Pack 3 Build 2600.
  Please let me know if you need other information.

  Thank you

  Just for the short term, right click on the structure of the event, select Configure the events managed by this case and uncheck the lock front panel.  Also, I don't know if you caught my edit.  I think your problem is your expectation (or lack of).  At your expectations to be slightly more than the number of steps to multiply by the pause time.  You must leave the instrument perform its scanning after all.

• vo.setAttribute () does not display data on page OAF after DB update

  Hello

  We try to set search field values using vo.setAttribute (). It does not work as expected when there is NO update in the DB table, but it does not display the value on the screen of the OAF when we update the table DB (call parametrisee AM method in controller-> inside the AM by calling the update procedure)

  Query for VO:

  Select t_number, t_type, c_name, t_status, org, of xx_custom_tbl

  where org =: 1

  and c_name =: 2

  and t_status = 'EMPTY '.

  attribute1 is null

  Now we have a button, to the click, it will fill with data in the field list of choices for all ranks. We have made this requirement. But we don't want duplicates in all ranks. To do this, we update the column table as "USED" attribute1 Now, for the second row, when the original Version runs, will be will not display selected data in the first row (as call to the procedure to update the column Attribute1 is done for all ranks)

  We get the code snippet below:

  In the controller:

  If (pageContext.getParameter ("submitButtonClick")! = null) {}

  Vo = OAViewObject

  (OAViewObject) am.findViewObject ("LOVVO1"); Lov inside a Table of manual search VO

  Vo1 OAViewObject =

  (OAViewObject) am.findViewObject ("TableVO1");  Table VO

  While (vo1.hasNext ()) {}

  String org = pageContext.getParameter("Org2").toString ();

  int totalRecord1 = vo1.getRowCount ();

  Row1 row = vo1.first ();

  for (int i = 0; i < totalRecord1; i ++) {}

  String C_Nm =

  (String) row1.getAttribute ("CName");

  Org = string

  (String) row1.getAttribute ("Org");

  VO. Reset();

  vo.setWhereClause (null);

  vo.setWhereClauseParams (null);

  vo.setWhereClauseParam (0, Org);

  vo.setWhereClauseParam (1, C_Nm);

  vo.executeQuery ();

  While (vo.hasNext ())

  {

  Line = vo.first ();

  String T_Type = null;

  String T_Value =

  row.getAttribute("TNumber").toString ();

  Row1.SetAttribute ("Trail_Number", T_Value);

  pageContext.writeDiagnostics (this,

  «aaaI am here.3...» T_Value ' + '.

  T_Value, 1);

  If (row.getAttribute ("TType")! = null) {}

  T_Type =

  row.getAttribute("Trail_NumberType").toString ();

  Row1.SetAttribute ("Trail_NumberType", T_Type);

  }

  }

  Serializable RestrictData [] is {org, C_Nm, T_Value};.

  am.invokeMethod ("RestrictDataLOV",

  RestrictData);

  pageContext.writeDiagnostics (this,

  "After the update of the table ' +.

  Row1. GetAttribute ("Trail_Number"),

  (1);

  break;

  }

  Row1 = vo1.next ();

  }

  break;

  }

  throw new OAException ('updated Table values!',

  OAException.CONFIRMATION);

  }

  Analysis:

  About adding various debugging messages, we have experienced is not populate data in the screen when we update the Attribute1 to "USED". Otherwise, the vo.setAttribute () is working correctly and display the data in the form OFA (search-> row table).

  Can someone please help?

  Kind regards

  Zahid

  Hello

  The code above works fine, it just sets the table at the end of the record values. Since we have similar values, we could not recognize that we actually visualize the latest reports instead of the first 10 records; where vo.setAttribute () worked as expected.

  Also, the first 10 records are now shown by adding the following code to above:

  row = vo.first;
  vo.setCurrentRow(row1);
  

  Kind regards

  Zahid

• Y510 unable to get data from the camera.

  Hello

  I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the laptop came, but it does not work. I also updated the bios and install other updates were available. I would appreciate any advice.

  Thank you

  Peter

  I wish it was as easy as press Fn + Esc, I looked through an another Y510 our office and managed to find a process that must be set to Auto, the process is KtmRm. This process cannot be disabled, handicapped, or on a time delay, it must be AUTOMATIC.

• I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  BabsMKE wrote:

  I get all my calls on my iphone 5.  It sounds at the end of the appellant, but it does not sound on my end and I do not get a past the call.  If the caller leaves a message, and then I get a voice message notification.

  settings - do not disturb - off

• I did a clean install of Mavericks and CC restored from a backup, and can not get one of the applications to load at all.

  I did a clean install of Mavericks and CC restored from a backup, and can not get one of the applications to load at all.

  properly install adobe products.

  at this point, just uninstall cc on your computer, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 then install the application of office cc, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your programs of cc.

• SubSkuCommerceItem is not get recorded in the table orders.

  We created a configurablecommerce element and adds subskucommerceitem and placed an order.
  
  It is, subskucommerceitem is not available in the order object in the fulfillmentpipeline formations.
  In one of the formations of fulfillmentpipeline, we did order.getCommerceItems (), which returns configurablecommerceitem. Then the getCommerceItems() on configurablecommerceitem returns null.
  
  On analysis further below, we noticed in the database, which could be the root cause:
  1 DCSPP_ITEM table has two lines for this order, one showing configurablecommerce point, the 2nd subsku.
  
  2 DCSPP_ORDER_ITEM table has an entry in this order, which is the configurablecommerce item id.
  
  I guess that subskucommerce is not getting stored in the descriptor control point.
  
  Also, there is no line in the DCSPP_CONFIG_ITEM table.
  
  Help, please.
  
  Error messages: no error message.
  
  Gopi

  There is code to save and load in normal subSkuCommerceItems save and load pipeline processors. The fact that you see a subsidiary question in dcspp_item means that it has been saved. Expect to see paragraphs in the table of dcspp_order_item because that's only the top-level items. Subtopics should appear in dcspp_item_ci instead.

  It is possible that your question has been registered but not recharged properly. Turn on loggingDebug in LoadCommerceItemObjects should be useful if that's the problem.

  Save this sub-item and loading code depends on the parent wrapper object CommerceItem that implements the CommerceItemContainer interface. If you have a custom CommerceItem implementation that does not implement CommerceItemContainer, which confuse the ootb save and load code. Another possibility is that code loading instantiates the class incorrect wrapper, what might happen if OrderTools is misconfigured.

• Service request not getting associated with the Contact

  Hello
  
  We have an interface between the Web site of our company and Siebel On demand application, visitors can come to our Web site and submit a request by filling out a form with their contact information and their request. In turn, this creates a folder 'Contact' and a 'Request for Service' in the Application folder,
  
  'Contact', we used WSDL and v2.0 "Request for Service" WSDL as the webservice interface, we find that the Contacts and requests for services are created as that individual records, service demand does not get associated with the contact record is created?
  
  We are capture the following information under the heading "Contact".
  First name:
  First name:
  E-mail:
  Phone:
  Address:
  
  and the following information under the 'Service request'
  Product information:
  Object:
  Description:
  Type:
  Status:
  
  Should the specify us anything else under the Service request in the interface that will associate the Contact and "demand for services.
  
  Is it because in version 2.0, each object exist as separate nodes that we are facing this problem?
  This will be solved by using v1.0, is there a limitation any using v1.0, please specify
  
  You can call me if you need additional information
  
  Thanks and greetings
  Satish Kumar
  + 1-857-869-0239

  Hello

  When you create the Service request, make sure that you set the field "ContactId" so that the created contact is associated with the SR created.

  -John CRMIT

• How to get data in the procedure after CREATE TABLE table1 AS SELECT * from table2

  Hello

  can any body tell me how to get the data in the new table created in the procedure. because it gives following error.

  • Error (47,21): PL/SQL: ORA-00942: table or view does not exist

  tableName: = "BCKUP_" | TO_CHAR (sysdate, 'ddmmrrrr');

  tableDDL: = 'CREATE TABLE' | tableName. "AS SELECT * FROM Table1 where to_char(MSG_IN_TIME,''dd-mon-rrrr'') < sysdate - ' | daysNumber;

  EXECUTE IMMEDIATE backUpDDL;

  COMMIT;

  DELETE FROM Table1;

  How to select the data in the newly created table. as...

  Select * from ". tableName;

  Do not choose anything to get the number...

  Just after backupDDL EXECUTE IMMEDIATE, simply refers to SQL % ROWCOUNT - who will be the number of lines.

  Oh and DDL engages automatically, your commitment is redundant.

• Data does not get inserted into the Hxt_Add_Assign_Info_F table

  Hello
  
  Can tell me regarding when the data is inserted into the Hxt_Add_Assign_Info_Ftable.
  Lately this table not get updates.
  
  Thank you
  Bitr

  When you enter the assignment of time information, this table is filled (responsibility of the OTL Application Developer > OTL time accounting > assignment of time information)

• Getting data from the nodes of event data

  Hi all

  I have a while loop with a Structure of the event and a Structure of case inside. The Structure of the event a lot of cases, and each of them is controlled by a different object (buttons, sliders, graphics, etc.). Sometimes, I have to use data from the nodes of event data to power a Business Structure that works like a State Machine in my code. To clean the block diagram, I want to 'export' data nodes using a single wire event data, but this is not possible because there is a conflict of data, since I get data of CtlRef in one case and Coords in others (for example).

  To resolve this problem, I'm feeding a beam to create a cluster and feed it to the box Structure data. However, the process is so painful, because I have to feed the Bundle function with constants of all sorts of data connected to him.

  Find attached an example. It is not the actual code but shows what I have to do.

  Thank you

  Dan07

  Why you do not pass a Variant to the structure of the case. In your case case simply make a variant of the appropriate data that you want to pass. I guess the case appropriate business structure will be to get called for the event. Given that you need to know the data type this case awaits can use the variant data VI and now you have the data you want.

• Do not find data on the server of Web pages, but do developing PC localserver

  My website access data OK on my localserver, but once I download on my server online, it cannot be found. It is there because I can access it via my ISP software.

  The error I get is - the website has encountered an error during recovery http://Bega.org.UK/gateway/graveyard/public/data/view_graves_date.php . It is perhaps out of service for maintenance or configured incorrectly.

  (The rsobj code file and php php is installed in my HTML files by WebAssist Server Assistant)

  
  

  By trial and error I found (I think) that the problem is the code on my web page

  <? php require_once('.. /.. /.. /.. / Connections/Graveyard.php');? >

  <? php require_once('.. /.. /.. /.. / webassist/mysqli/rsobj.php');? >

  <? PHP

  $rsGraveyard = new WA_MySQLi_RS("rsGraveyard",$Graveyard,0);

  $rsGraveyard-> setQuery ("SELECT * FROM gravestones ORDER BY grave_funeral_yyyy DESC");

  $rsGraveyard-> execute();

  ? >

  <! doctype html >

  < html >

  < head >

  .......

  .......
  

  Once again, by a process of trial and error, I think the connections file graveyard.php there is an error in the path or a case issue between graveyard.php and Graveyard.php.

  The connections file is

  <? PHP

  # FileName = "WADYN_MYSQLI_CONN.htm"

  # Type = 'MYSQL '.

  # HTTP = 'true '.

  $hostname_Graveyard = "localhost";

  $database_Graveyard = "cemetery."

  $username_Graveyard = ' * ';

  $password_Graveyard = ' * ';

  @session_start ();

  $Graveyard = new mysqli ($hostname_Graveyard, $username_Graveyard, $password_Graveyard, $database_Graveyard);

  ? >

  
  

  I'd appreciate any help on this. Try to understand me he kept me entertained all weekend.

  I looked again, and that's what I found.

  My first site was based on the original David tutorial "build your first dynamic web site. I was advised by Nancy O when DW CC dropped behaviors side server using WebAssist ones. The code mentioned earlier in this thread has been inserted in the file by WebAssist server behaviors.

  I didn't like my first site so I made a cosmetic redesign, but kept the dynamic code on the site first - it worked. Still doesn't work.

  The new site has been working properly until a week or two ago but then, for some inexplicable reason, he stopped allowing me to add or edit records. Now I can view and the list of records, as described in the tutorial of David but not add or change. This problem applies to all three databases.

  Although I saw no difference in code between the old and new files (apart from the cosmetic things) I tried to copy the code of the dynamic action from the work to those inactive files but it does not work in the new files.

  So the problem must lie elsewhere. The files in the folder connections are all correct (same as the old site) and as I said I can list all of the records and discovered the complete data of the selected, both paths to the files, and the user name, passwords and the information contained in the files in the folder of connection should be OK.

  So, what's the problem? Where should I look? I'm getting pretty desperate scrap ot batch and leave. As a great need to exercise for me probably not quite a waste of learning time, but it's frustrating.

• Data collector, do not get data Mem Inv

  I have set up the data collector in a Windows environment only with a mix of Windows 2003 and Windows 2008 servers.  I get most of the data of most of the servers, however, the collector seems to have a problem of MEM INV of machines 2008 data collection.  Therefore, these servers show us as "not consolidatable."  Anyone encountered this before?  It would be nice to include these servers with the assessment.

  Thank you

  Kenny

  You can make the change on a global scale. Go to admin-> options and click the double-click tab inventory modules and the register selection. In addition, if you have already synced to the mother ship, you have to force a complete inventory. It is on the tab export.

  

  

  

  Dave Convery, VCDX

  VMware vExpert 2009

  http://www.dailyhypervisor.com

  http://Twitter.com/dconvery

  Prudent. We do not want to make of this.

  Bill Watterson, "Calvin and Hobbes".

• AF:table value of text entry box does not get stored in the database.

  Hello
  I use af:table in my jsff page. The table contains the column of text entry box. After clicking the Create (+) button, a line has been added to the table. I got value into the text entry field and click the 'OK' button to commit the transaction. When I check the database, the entered value is not stored in the database. What I've observed, it's that if I have more than 1 table in the af: table and after entering the value into the text entry field, if I tab out and control moves to the next line, and then click the OK"" button. This time, the value you entered get stored in the database. It's look like, the value of current row is not updated until the action tab. Please help me solve this problem.
  
  JDeveloper version: 11.1.1.6
  
  Kind regards
  Suresh

  Hello

  What is the business service associated to this? Also the OK button have no immediate = true set

  Frank