Do not install Windows Vista SP2

Similar Questions

• Not to install Windows Vista SP2 error Code 80070005

  I tried to install Windows Vista SP2 32 bit and I have SP1. When it is done install says it failed and it gives me error Code 80070005. And I do not have enough disk space. Any suggestions?

  Hi, GregDaSpider,

  Try the resolutions listed here:

  0 x 80070005 access denied. You are not allowed to perform the requested operation.

  http://support.Microsoft.com/kb/816731

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  http://support.Microsoft.com/kb/968003

• Error 0x8007045D when you try to install Windows Vista SP2

  Hello

  Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

  The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

  Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

  Thanks for your help!

  OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

  Chkdsk /f found errors it corrects.

  I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

  The good news: I still have a functioning computer.

  The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

  I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

  I guess I have no choice.

  I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

  Microsoft security essentials is a better a v for not update couseing problems.

  You can allways put avg in the back.

  not having is not enouph to free space for temporary files can couse problems too.

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• 80070490 error code when you try to install windows vista sp2

  OK JUST LISTEN UP GUYS I REALLY REALLY NEED HELP!

  OK to start with I have a 32-bit with sp1 operating system.
  I need help, try to install windows vista sp2. I tried for ages now to make it work, but I quit so I hope you can help me.

  It comes up with error code 80070490 and it says get help with this error so I click it and it says I have to insert a windows dvd?
  I HAVE A DVD OF WINDOWS, SO IT WON'T WORK

  SOMEONE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  ITS REALLY ANNOYING
  

  Hello

  1. who is the antivirus installed on the computer program?

  2. What are the steps you tried to solve the problem?

   
   
   
  Download and install the update the system analysis tool
  80070490 error when you install Windows Vista SP2 or Windows Server 2008 SP2
  http://support.Microsoft.com/kb/976920
   

  Search for the error message in the event viewer.

  Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

  For more information, see:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps.

• Cannot install Windows Vista SP2.

  Original title: sick to death!.

  I tried for a VERY long time to install windows vista pck 2 AND IT WONT! I tried the solutions here and NOTHING. Help, please!

  Hello

  "I tried the solutions here and NOTHING. Help, please! "

  And what are the solutions you have tried on here?

  Here are some suggestions, you don't say what you tried.

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all, the installation of SP1 If it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Used to install Windows Vista SP2. Error 0x8004100a

  Hello

  I know I'm a little late to this but I have never tried to install SP2 before that never came. I now need to install for a new part and for the life of me I can't make it work.
  I am currently running Windows Vista SP1 32 bit on an Intel E8400 Core2Duo with 4 GB of memory and a lot of HARD drive space.
  I downloaded SP2 and tried to install (downloaded because it has never been available via Windows Update)-all I get is before trying to install anything even really is "an unknown error occurred, error 0x8004100a.
  I then installed system update readiness tool, which is listed as installed successfully. All other updates available had already been installed. I disabled my antivirus and subsequently disabled it and all the other programs startup, restarted, and I still get the same error. I stopped all non-microsoft services and no change.
  For the life of me and with the hours spent searching google, I can not know how else to install this SP2. Are there other things I need to do?
  Thank you

  Hello Alex

  There are a few suggestions for this particular error on troubleshooting forums. Here's a suggestion is given by another Member of the forum who have worked for others. Refer also to the KB down concerning the specific error code that you gave. Thank you

  SP2 was offered through Windows Update? If this isn't the case, then it might suggest that the laptop was not ready.

  FYI

  Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
  http://support.Microsoft.com/kb/948343

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  With the permission of MVP TaurArian

  http://support.Microsoft.com/kb/952577/

• do not install windows vista service Pack 2 and received error code 800f081f

  I tried to install windows vista service Pack 2 used by windows update and did not erro code 800f081f. I tried soft micro that it fixed and still couldn't install pleasehelp

  Hello

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot install Windows Vista SP2 due to error code 0 x 80070490

  Original title: conclusion it is impossible to install the Vista SP2

  Hello. I'm trying to update my parents with Vista SP2 computer, but it's a disaster. It is a 32-bit operating system. First of all, I tried to install it with windows live update but got the error code 0 x 80070490. Then I tried to download it manually from the Windows Download Center, but this has led to the same problem occurs. I then removed all virus protection programs and tried again, but it still doesn't work. I then downloaded the Windows Update Readiness Tool 947821 KB but when I try and install it it freezes for hours constantly and will not install. I think of anything else to do and I was wondering if anyone can help. Thank you

  Hi CVinaccia,

  Follow the steps described in the article below, dealing with a similar issue

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

• Do not install Windows Vista SP1 with error 800F081F

  My computer has window Vista Home Basic 32-bit operating system.
  I try to install Windows Vista SP1, and opinion on the recording of history that Windows tried to install automatically it but not all the time. The error code is 800F081F. I need to install the SP1 and SP2 to install my new software "PeachTree". Help, please.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Why my computer won't let me install Windows Vista SP2?

  Whenever I try to install SP2 through Windows Update, it won't let me he always says that it has failed. All solutions?

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

• can not install window xp sp2 on acer aspire 4736z

  I can't install Windows xp sp2 on acer aspire 4736z computer.

  Why would you install sp2? Install sp3. SP2 is no longer support for security updates.

  Service Pack 3 download

• Could not start the desktop Vista after installing Windows Vista SP2, error: 0XC0190036.

  Original title: vista sp2 problem.

  I have a laptop that I haven't used in a while.  I took on a trip and received the message that the updates are available.  One was SP2.  After the update is complete, it failed to start with a message OXC0190036.

  Startup Repair said that he could not solve the problem.  Restoration of the system has not only restore - labeled SP1 and it allows you to finalize the restoration of files and stays there.  (I waited for 3 hours without change).
  I have a XP install disc that I used before installing Win 7 on my desktop, but it does not give me the opportunity to do an installation.
  Can enter the command prompt, I'm perplexed as to what to do.
  I want to get this laptop that works so I can give to someone who needs a faster machine.
  Thank you.
  Harold Menzel

  Hello

  XP disk will not help you to fix Vista

  As the system restore does not try a startup repair and / or a restoration of the system using a Microsoft Vista DVD

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here are a few ways to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• SE error message: "elements not found" when installing Windows Vista SP2

  Original title: error please help

  I am running vista and currently have service pack 1 to install most programs it said I must have service pack 2, although I tried to install manny time either through the window system update or if a download on the microsoft site and I sill get the messege even while trying to install "no items" and an error code weird, I searched and google ect but don't watch until someone could please help me with this as a carnt install the basic things I need for example: microsoft word-. -.

  Please help before I end up spending 200 + just to buy a new Tower

  Hi jasonv123,

  You can read the following article and try resolution 2: run the system update readiness tool and check if you can install Vista SP2.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 80004005 by installing Windows Vista sp2 x 64

  I tried to install this updated 4 x I read an answer in this forum which is similar to my problem and I tried the solution, but it would not install.
  I noticed something this last time because I saw the installation process. We all know that the system can reboot several times during the installation. During the 3rd part of the installation, the user account screen asking for the password. However, I had no time to type the password in it, because it jumps to a screen saying that the computer is to install the updates. Then, when the updates for the 3rd party are finished 100% it is said that they can not be installed. Then the computer uninstalls them and puts the computer in its preinstallation State. Is it possible, because I didn't have a chance to enter my password, the computer refuses to recognize me as the administrater during the last part of the installation.  Therefore, maybe stop the installation process of the necessary changes and it returns to the previous state. I'm probably grasp at straws here, because I have never had a problem like this before. Does anyone know what I need to do to remedy the situation?
  I don't know if it's important but I installed another update after the 3rd time. The update has been successfully installed and working. So I thought that everything was ok and tried to install sp2 again. It's the same thing. Why can I install other updates, but not as an individual? Other than this problem installing, the computer works pretty well. I didn't notice a slow or something else for the past two weeks. I'm puzzled.

  I have an (office) Packard Bell imedia x 5705 Intel Core 2 Quad 4 x 1 GB (RAM) 2.33 GHz
  1000 gigabit hard drive
  Type system in Windows Vista Home Premium 64-bit
  Graphics card: NVIDIA GeForce GT130

  This computer is connected to 2 other computers with a D - Link KVM Switch. One of the other computers has a 32-bit system Intel dual core Vista sp2 running without any problem. They also share a router for internet access broadband.

  Should I try to reuse the recovery disk? I don't want to make things worse.

  Thank you, Debbie - the technical support for all your help.
  I went through all the steps mentioned above in the correct order. However, they have not corrected the problem.
  I used the Packard Bell Recovery Management options and restore my computer to its original state. Then I installed all necessary updates including sp2. I was not activate the preinstalled anti-virus software, or change programs or settings up to that later. That's the good thing. Packard Bell Recovery Management also creates a separate file for all personal files. Thus, when the computer has been reset, I still had my personal files.