DO NOT LOADING of the BATTERY Lenovo Y580

Similar Questions

• Im getting the message 1% available (pluged, do not load) on the battery indicator

  Im getting the message 1% available (pluged, do not load) on the battery indicator

  Hi MICHAELRIVERA,

  ·         Who is the manufacturer of the laptop?

  ·         What operating system do you use?

  If your laptop does not charge:

  a. This may be caused by a faulty adapter (the part that you plug into the wall socket)

  (b) a component on the motherboard defective charger.

  Try the following.

  I suggest checking the connections, connect it properly, or contact the manufacturer. If you have a spare power adapter only to login and check. (Of the same brand and model)

  a. Click Start and type device in the search for field, and then select Device Manager.

  b. expand the batteries category.

  c. under the batteries category, right-click in the list of Microsoft ACPI compatible with battery control method and choose uninstall.

  WARNING: Do not remove the Microsoft AC adapter driver or any other compatible ACPI driver.

  d. on the Device Manager, select Action, and then search for the hardware changes.

• Get the battery signal plugged in but does not load from the battery replacement

  Original title: Battery Charge.

  I recently changed the battery in my Dell Windows Vista laptop, but now the saysthe icon power battery is connected, do not load. The computer not recopgnise not the charger. Help please.

  Hi Tom,

  I suggest you to follow the steps from the link and check if it helps.

  AC adapter not power or charge the battery

  Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, contact Dell support and check if that helps.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support?c=us&CS=19&l=en&s=DHS& ~ CK = mn

• Priv of Smartphones BlackBerry blackBerry don't will not load. The battery with white exclamation point icon! point

  Update: it was not after all water damage.  The day I splashed it I also sink it terribly low on battery.  Here's how I diagnosed and brought it back:

  1 held the power and volume for 16 seconds until what the phone into bootloader mode.  Choose the first option to continue the initialization of the phone.

  2 opportunity expert virtual Blackberry to test all functions of the phone.  Everything worked.

  3. went to settings-> battery.  0% battery does not charge.

  4 powered off phone

  5. "battery charged" the phone:

  1. connect to the most powerful USB charger that you have (for me, 3 amps)

  2. as soon as the battery with white exclamation point icon appears, unplug the phone

  3 phone plug back in.  When the battery icon appears unplug.  Repeat 20 - 30 times

  6. Finally, the phone will start just showing the Red instead of the battery icon.  At this point, that the costs of phone for at least an hour.  The status indicator turns yellow

  7 turn on the phone and load completely

  I learned about the "battery charge" of the old Playbooks Blackberry.  Apparently, the voltage of the battery may get so low that the BIOS of the phone which will detect and not to load.  But during the 10 seconds or so to detect, the battery will be a slight amount of charge.  If you keep pushing a little fresh this way over and over, finally he could get enough power to be larger than the minimum voltage and start loading.

  Good luck to everyone who has this problem.

  ---------------------

  Does anyone know a provider for private blackberry battery? My phone got damaged (by a very small amount of water, not overwhelmed), water and is now show white battery icon with exclamation point and do not start.  I would try replacing the battery to see if it is the problem or if the load circuit. (Yes, I know that this isn't * technique * replaceable by the user, but I have the backcover and can do).  BlackBerry support said they don't sell them and wants to $275 + to fix the device, which is almost the cost of a new private on Ebay. Someone know a provider or have a spare battery that I can buy?

  Thank you

  -Lester

  Edition of the above to reflect the real problem.  The battery is just incredibly low.  Come to think of it, I'd run it for about 2 days and what I thought was caused water damage was just a super low battery. I "battery charge" it.  My discription full of how I did which is updated above in the first post.

• I want to make my laptop plugged in, but do not load when the battery reaches 95%. How can I do?

  H !!!

  I want some help to train you...

  There are growing problem in many portable of peoples that their laptop shows connected but does not support...

  But it's not my problem.

  My problem is just the opposite of it.

  I want to make my laptop plugged in but not in charge when the battery reaches 95% how can that I do?

  Hoping answers from you...........................................................................................................

  Original title: Performance and tools

  JNMilan,

  It is not possible. You must use a third-party software to do or contact the manufacturer.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Back to us for any problem related to Windows in the future.

• (plugged in, load) but the battery is not charging

  Hello!

  I have a problem with my hp laptop Pavilion dv6 - 2190ev.

  The laptop cannot start if the charger is connected only (and the battery). It will only start if the battery is on. Also, the led and the laptop displays: (plugged in, load) but the battery won't charge!

  The battery and charger are ok, because I tried on another laptop and work there!

  So, the problem seems to be on the laptop. I also update the BIOS and the problem persists.

  Can someone help me solve this problem?

  Looks like you did a few good troubleshooting at this point.  One thing which is ofter overlooked in these questions is the motherboard.  Here is an article by HP, battery not power Notebook or hold a Charge.

  Please take a look.  There are suggestions for troubleshooting for the power supply, motherboard and battery, as well as links to other useful information. I'm sorry this isn't a simple solution, but you could just find very useful information in the article.

  Good luck with it,

• Windows XP will not load past the Blue error screen

  Hi, wondering for a while if someone can help me...

  My xp system will not load past the Blue error screen that is displayed when the computer stopped suddenly or inadequate.

  No matter what are the measures that you choose to take (safe mode, the most recent configurations... etc) the system will just beyond the blue screen on the windows logo download page, where the loading bar moves about 10 seconds before returning to the blue loading page.

  So far I have tried to leave the computer as long as an unused months while I was abroad, remove the battery for varying amounts of time and leaving the computer as long as a day.

  In the absence of a recovery disk, I have no idea how to do to return to the form and would like to receive advice or suggest, keeping in mind I'm not a computer genius (if had'nt you may have guessed). Preferably, without losing my element pictures and videos stored on the hard drive, but it's just preference.

  Thank you, Jay

  Hello

  It does not seem good friend if the Windows operating system does not start even using safe mode, then I don t think you will be able to run the operating system without new OS reinstallation. :(

  To back up data from the HARD drive I recommend that you connect the internal HARD drive to external USB HDD controller and a backup of the HARD drive on another computer.

  Then you could try to reinstall the operating system on your laptop using the Toshiba Recovery CD

  See you soon

• Satellite A100 PSAA9C does not work without the battery inside

  I'm having a strange problem with a laptop Satellite A100 (PSAA9C-SK900E).

  The machine will not work without the battery in it. If the power supply is connected in the machine and the wall, it will power without the battery installed. If I install the battery, let it load completely (battery LED goes from orange to blue and the plug LED is blue) then start the machine it will work for a period of time (more than an hour depending on what I'm doing) then suddenly turns off.

  If I restart the machine, it will work for a very short period (sometimes only for a few minutes) just before going off.

  If I do this a couple times, the machine will be not even by post before turning off.
  If I let the machine to recharge, it runs for a while and then do the same thing after using it for a while.
  If the battery is pooched, which is fine with me. How to operate with only the power supply of the machine?

  As I type this I'm suspecting that the adapter cannot be taken out the required voltage/amperage. (adapter is not still hot when charging, are my other laptops) Any suggestions would be greatly appreciated.

  Thank you.

  Hello

  If I understand your assignment, the laptop does not power up without the battery
  But it will light if the battery is connected.

  The question is; Is the power led on if the AC adapter is plugged?
  If this isn't the case, then it means that the power adapter is faulty and so the laptop cannot be turned on by using only the AC adapter.

  I think you should test a new adapter. Maybe it helps!

• I need to print from firefox icon as I used, because some pages that I need to print do not load with the menu.

  Since a recent automatic update, I was not able to print by clicking on the firefox tab icon. I have pages that I need to print, that do not load with the toolbar complete with the key of menu etc. I could always print by clicking on the icon, but no more. Help please.

  you could try pressing and use 'ctrl' then 'P' on your keyboard
  We also write 'ctrl + P', it's the printing system wide combination of shortcut keys.

  Alternatively, you can try, right-click in the title bar (where your loading tabs) and selecting 'Menu Bar', which will show the menu bar (with file, editing, display, etc.) on the tabs allowing you to print from the submenu file

  hope that helps!

  See you soon

• Satellite L500 will not load beyond the screen "Welcome".

  Hello

  My Toshiba Satellite L500 laptop will not load beyond the screen "Welcome". The right slider thing keeps going around and around, but won't on my desk.

  Last night, he went into a temporary profile and he got a message saying "another profile cannot load at this time please try again later".

  Any help would be greatly appreciated.
  Thank you
  Kara

  The error message is not known to me and also looking in google didn t get advice.
  Maybe your Windows operating system is confusing upward.

  Have you tried to boot Win 7 in safe mode?
  Try this. Restart your laptop, press the F8 key.
  In advanced startup options, select the option called Mode without failure.

  If the laptop does not start Safe Mode, try the last good known Configuration option.

  If this n t help, try to fix my computer. Here, you can choose between different settings.
  Who could solve that problem is HARD drive recovery that helps you define the notebook to factory settings. But it also means that your disk should be formatted!

  So be aware of this!

• C50-A-19 t satellite does not start with the battery mounted

  OK, first post here.

  I see similar questions coming, but as they are never QUITE the same, I am that posing in a new thread.

  I left my Satellite from one day to the next (do not remember if I had put off, or he simply had 'gone to sleep', but it has been connected to the grid).

  When I got to reboot, I got a power light on, but screen blank (black). After reading a few similar complaints on the internet (via another laptop!), I tried to remove the battery and power from the grid.
  This worked well (I write him in this state right now).

  But whenever I put the battery and try again, it will fail in the same way.
  I tried this company "press and hold power for 30 seconds" without success (but I'm not 100% sure of the EXACT procedure actions sequence).

  I have a few questions:

  (1) I take the laptop away from my office - is there a problem with everything just works like this (i.e. of the grid, with no battery inserted) indefinitely?

  (2) in any case, I want to solve the problem.
  If the battery has run COMPLETELY flat, and that the laptop can not it lights but also operate normally?

  Alternatively, is probably that the battery has not experienced a catastrophic failure and simply needs to replace?
  If so, I'll just buy a. BUT...

  What I don't want to do, is to pay for a costly spare battery, to find that it was actually another factor at the origin of the problem, and I'm back to square one and out of Pocket!

  Any advice would be welcome.

  Thank you

  Mike

  Hello

  According to your assignment, in most cases, you use the laptop connected to the power adapter but no battery. Is this correct?

  First we need to know that if the AC adapter is plugged in, the laptop should work correctly with - and without inserting the battery.
  If you unplug the AC adapter, the laptop should automatically switch to battery power. In this case, it is important that the battery is pretty cool power to provide the power for the laptop.
  In case the battery is empty, the laptop will not light.

  I recommend to insert the battery plug the power adapter and charge the battery for a longer period of time.

  You should also check if the battery is recognized by the Windows system and the battery charge indicator (battery in the taskbar icon) shows the State of battery charge.

  In case the battery is fully charged and the laptop does not work using the battery power only, you should test the new battery.
  If new battery does not solve the problem, s for laptop hardware needs an audit.

• Satellite M105 - recovery disk is not load all the drivers

  I wiped my M105 HD using the Toshiba Recovery DVD. XP Home loaded, but good number drivers did not load as the ATI, Intel Wireless, Ethernet, etc..
  Most of the factory programs installed, but not important factors.

  What do you advise?

  Thank you

  Hello!

  Did you use the right Toshiba Recovery disk?

  I put t know why it happened, but try to install the drivers manually. You can find the Toshiba site:
  http://www.CSD.Toshiba.com

  Good bye

• Laptop will not start without the battery attached

  Hello

  I have a Hp pavilion dv6700 series (dv6840el) and just, it will not start without the battery attached.

  If I plug in the AC adapter, I get some computer activity (fan, noise of the dvd player and HD drive spins) for about 5 seconds, then shuts down.

  Once I plug the battery (which is dying, who need a replacement), the laptop starts fine.

  So my question is: what is a motherboard or a problem with the AC adapter?

  The AC adapter looks ok, however. But if I am considering buying a spare battery, I assure you that I have a new adapter as well.

  Thanks in advance.

  Hello

  Visit this link

  http://h10025.www1.HP.com/ewfrf/WC/documentSubCategory?tmp_rule=61317&tmp_task=solveCategory&CC=US&DLC=en&lang=en&LC=en&Product=5081068&Query=dv7-6052ea&Tool=

  Good Luk

• My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  My 2009 macbook pro will not load.  The technician said that the motherboard must be replaced.  Is there a less expensive repair?

  Apple has set the rates, price around $300 repair program.  I don't think you can get a price of paste elsewhere.  However, there are third-party sites that provide repairs, parts and helpful videos.  Google is your friend.

• Additional licenses purchased in 2004, but they are not loaded on the server, and they can't find the hard copy of the licenses to load them in.

  Asked me to take over the COMPUTER Department of a small Christian school. They are running SBS 2003. They bought licences for additional client access in 2004, but they are not loaded to the server and they can't find the hard copy of the licenses to load them in. Also, they purhcased of XP Pro and Office 2003 licenses (I have the disks and keys to install but do not know how many licenses they own) and they are not either of the paper copy of these licenses. Is there a way to contact Microsoft to get the licenses? Any help would be appreciated.

  Bill

  original title: recover lost Volume Licensing

  I just figured this out...

  I called the 1-866-230-0560 Option 3 Volume licenses and talked to someone who searched under the name of the school in order to locate licenses. It is even searched under our zip code and found other licenses that have been purchased by the school where the dealer abbreviated the name of the school.

  I hope that this is useful information to others in the same situation.

  Bill