Do not pick up wifi networks sometimes

Similar Questions

• Equium P200-1ed - card Atheros WLan does not pick up all networks

  OK about amonth and a half there is weupgraded of Windows Vista to Windows 7, 32-bit Home Premium.
  Everything worked without problem (yes I know with access)

  Then suddenly at 01:00 today, Internet went on the Toshiba laptop and we can't put it back on. I tried the new drivers and nothing, try the keys FN and nothing turned also out of the card wireless forward and turn it back on. The laptop is the map reckonising, becausewhen I uninstll the driver picks it up. So I'm so confused as to what it can be.

  Girlfriend wason Facebook at the time. I scanned Virus, Anti-spyware, scanned and cleaned C islet still nothing. So I checked online to find loads have had the same problem, but no one seems to post the answer. Could someone please help.

  Laptop is Toshiba Equium p200-1ed, Intel P Dual Core CPU T2310 1.46GHz 2 GB of Ram. Running Windows 7.
  The problem is with the wireless adapter - Atheros AR5007EG Wireless Network Adapter

  As I say, works fine, then suddenly do not pick up all networks. My other computer laptop of them is recovering fine. Running the computer on the Ethernet cable. Just not the wireless. He does not know the wireless card is there, it is like its just abandoned, but if a lot of people have problems with Atheros adapters in windows 7. Can someone please.

  David

  Hey dude!
  Thanks for sharing this with us! Could be useful for other people who have discovered the same question

  Welcome them

• Apple Airport express records is not on the wifi network

  HI, I bought an Apple Airport Extreme new several months and I haven't connected my Airport Express so far. For some reason, the Airport Express is same does not record on the network. I unplugged for several minutes and plugged in. I don't know if there may be a software update that I missed?  Someone had this problem?  I would be grateful for any help. Thank you! Chuck

  If you have not reset the Terminal AirPort Express to settings by default and then set up again to extend the network provided by the AirPort Extreme... so now may be a good time to do this.

  As it is, the Express is not "appear" on your network because it has not been provided with the settings to do.

  If you need some advice on how to get the Express running... we will need a little more information from you as follows:

  (1) your AirPort Express Terminal has two Ethernet ports... or... does he have one?  If is has one, we need to model on the side of the unit number. It starts with an "A" followed four digits.  For example... A1264.

  (2) AirPort Express Terminal will connect to the network using a permanent connection to the Ethernet cable wired to AirPort Extreme... or... the Express will connect wireless?

  (3) what device you use to configure the AirPort Express Terminal?

  (4) If you have a Mac, we need to know what operating system they are running. If you are not sure about this, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and post back with the Version of OS X number that you see there.

• IPHONE 4S IS NOT PICKING UP WIFI AT HOME, BUT ALL THE OTHER APPLE DEVICES

  My iphone 4s, the Ipad and the mac pro are all connected with happiness to my home network.  However my wifes Ipad and iphone 4S have both stopped

  a / showing a sign of wifi in the top bar and

  b / does not connect to it.

  Have tried to reset several times now.

  Hints would be appreciated.

  Take a look at this Apple Support article:

  https://support.Apple.com/en-us/HT204051

  Reset your network settings.

  Settings - general - reset - reset the network settings

  Reset your device. This will not erase your data stored on the phone.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  https://support.Apple.com/en-us/HT201559

• Pavilion X 2 running as Windows 10 does not detect any WiFi networks

  When starting the Tablet this morning, I received a message "not connected - no connection is available. My home network is up, running and accessible by other devices co-located, including the smartphone with which I'm making this post. Troubleshooting of the Internet connection and the network adapter with Windows Network Diagnostics 3.0 gives "no problems found".
  
  Help? Restore Win 8.1?

  Do not take into account. The Tablet has been at the center of an important Windows Update with no noticeable indication (for me). Detection of network resumed work at the end of the update, and this message is sent on the Tablet already affected. Moral: patience.

• Printer HP Officejet 6100 (h611a) can not find the WiFi network

  My printer HP Officejet 6100 has recently lost its eprint connection and would not reconnect.  I asked for help and told

  try to use an IP address manually.  I tried this according to the instructions provided to me for the manual IP address, subnet mask and so on.  I selected apply.

  The restarted printer and now the printer cannot be found or will not connect to my

  wireless network.

  I tried to power on the printer, the modem and the router so that it would reset but the printer would not still find or connect to the wireless network.  The little blue light on the printer for wireless connection just continues to blink.

  Because it connects to the wireless network I can not go back in the server web part to cancel the IP address manually and other changes.

  Is there a way I can reset this?  Or get my printer to connect to the wireless network.

  Steve

  Hi scthom,

  Welcome to the Forums of HP Support! I see your HP Officejet 6100 has recently lost its connection ePrint, and now, you are not able to get connected to your wireless home network. I would like you to follow the steps below:

  Please start here: convert from a connected printer USB wireless

  You are now connected to your wireless network? Please let me know the results, I'll watch for your reply.

  Thank you

• BlackBerry Smartphones - not connected 2 WiFi network error message

  I had my curve 8520 for almost a year now and today after I deleted some apps, its saying that my phone is not connected 2 a wireless network and well obviously won't let me use bb app store or my weather apps. Please tell me how 2 fix it

  The first section is indeed for BB10...

  

  But if you keep reading, you will find the section for users of pre-BB10 (i.e. you):

  

  But remember... Here are the steps to perform in the order. Don't go to step 2 until you were correctly step 1.

• Laptop does not find the wifi network

  It's probably a bit of a stupid question, but I guess I'll ask in all cases... What should I do to my laptop, if not to find a wi - fi network you want to connect to? When I get the help, I thought that an ethernet cable is unplugged, but my other laptop is to find a network very well, so why not this particular laptop?

  Seems to me that you have not installed the drivers for your wireless network card.

  Try to go to the Dell support site - below is the link to the drivers for your laptop special.
  If this does not work somewhere on your laptop (below) be a sticker with a "service tag" will enter this on the Dell site and it will connect you to the drivers you need.

  Look at the link below and download the driver for the card relevant wireless in the category 'Network' - unfortunately I do not know who it will be exactly so some trial and error may be needed.

  Dell link: http://www.dell.com/support/home/uk/en/ukbsdt1/product-support/product/inspiron-15-3521/drivers

  Judging by the result of your device manager that you may need to install some other drivers on the Dell site. Ideally, you should have no device showing that they need a driver.

• HP C7200 all-in-One printer will not print via Wifi network

  I used the HP printing and scanning of doctor, but none of the proposed solutions have solved the problem. Blue light for service 802.11 g wirelwss is turned on and connected to the same Wifi address as my laptop is now using. My Dell laptop is running Windows 7 and the printer works if I use USB instead of Wifi connection.  Any suggestions?

  Larrypat

  I followed your suggestion and got the wireless link by manually entering the IP address of the printer during the wizard process.

  Thanks a lot to get me down the right path! I love my new freedom of wireless service. Thanks for the help.

• iPhone will not connect to WiFi

  I have an iPhone running iOS 10 6. Since I have updated to iOS 10, I had problems connecting to WiFi. It happened the first time I've updated and I read that it could be some issues with the latest iOS, therefore, some recommendations to restore the iPhone, I did and it set for a few days, but once again, the issue is back.

  When I go into WiFi mid settings it does not recognize my WiFi network, but as he said 'safety recommendation' when I hit I got a message that says "low security, WEP is not considered as safe. Configure your router to use WPA2-Personal (AES) security type for this network"

  This message never came until it again once I have updated to iOS.

  Any thoughts?

  Thanks in advance!

  Hello

  Follow the steps here:

  • If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
  • To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support

  Apple recommends the parameters of the Wi - Fi routers and access points are detailed here:

  • Recommended settings for the WiFi routers and access points - Apple supported

• my airport express does not extend to my network

  Hello to you all guru out there...

  I 5g internet and comes with the router and signal is fantastic in the main lounge, but it is a large apartment and once I get my room the signal decreases considerably.

  I bought an Airport Express and it connects to the wifi perfectly, green light and everything, but it does not extend my wifi network...

  Do I need to have another Aiport Express hooked up to the main router, then extend the Airport Express wifi or should I get an Airport Extreme?

  Any advice or help is greatly appreciated.

  Thank you!

  Do I need to have another Aiport Express hooked up to the main router, then extend the Airport Express wifi

  Yes, the "main" AirPort Express should be connected to your router using a wired Ethernet cable connection, permanently. This Express will be set to "create a wireless network.

  Other Express your distance can then be configured to "extend a wireless network.  In its current form, your existing Express is configured to "join a wireless network.  It will work for AirPlay like that, or allow you to connect a supported USB printer, but it cannot extend a network provided by a third-party router wireless.

  Regarding matching them things, it would make sense to use two airport expresses, or the two extremes of the airport.  The extreme might be your "primary" router if you wanted to, but the Express would not be able to expand the capacity of faster speed to the extreme.

• T430 on Windows 7 (64 bit) sees no wifi networks

  My agency just gave me a Lenovo T430, and I'm in charge he get up and running. Requires the company, I work for a new installation of Windows (I installed Windows 7 64-bit), but does not install the drivers for the T430 outside ones included in editions of the retail of Windows. Apart from this question, the T430 seems to work very well.

  I is gone on the side of Lenovo driver download and downloaded all the drivers for Windows 7 64 bit wifi and installed those who install and rebooted. Still not to see wifi networks.

  What should I do to get this T430 to see wifi networks?

  Thank you

  Greg

  From here: http://www.pcidatabase.com/index.php

  DEV_0891 returns as: the controller of Gigabit Ethernet 10/100 / 1000 Mbps, which seems to be the wired Ethernet. Your wired connection works or you use another machine for packs driver D/L? The drivers for this device are here: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028930 if you need.

  Given that you have ID'ed visually the wireless network adapter, the driver W7x64 related here:

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS015011 * should * be what you need, but I am surprised that you are not showing a network controller "yellow!" which itself with the dev ID is appropriate. Can you confirm that you have tried to install this driver pack?

  Finally, I'm fairly certain that the Base system device is the Ricoh card reader. The pilot would be here: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028931 if so.

  Kind regards.

• iTunes crashes if its wifi network does not have access to the internet

  Hi all.

  I'm running a 13 "mac book pro with OS X El Capitan.

  I have a very specific problem of iTunes which is really bugging me.  I'm a pro saxophone player and part of my job is performed as a soloist with playbacks on my mac.  To avoid having to walk to the mac to start the track to accompany each song, I use a tablet on a stand that I can place anywhere in the room.  I've set up a router next to the mac that the mac and the tablet of connect to, and I run "retune" on the Tablet (I think it's that his name) which is a wifi iTunes remotely.  Installation is really smart cos he allows me to choose new avenues of selection from anywhere in the room instead of walking back and forwards to the mac every time.

  The problem I have is that sometimes maybe (1 to 5 times), I have a real problem from iTunes when the mac is connected to a wifi network that has no real internet connection.  I'm sure that iTunes detects wifi connection and then tries to access the internet to connect with the store.  When he is not in the store it just crashes and I get the spinning wheel of death.  Most of the time, I can simply restart the program several times and finally he decided to play ball, but it's a real pain.  And I did a concert yesterday where he would not have enough, no matter what I did.  If I had no choice but to turn off the router and keep walking to the mac for each song.

  I can't find a setting anywhere on iTunes that can disable the connection to the store and I really am stuck.

  I also tried alternative programs (I used Clementine briefly but I just found it too flakey to be invoked) and so I am open to others suggests.  But I need a player who has a remote app that I can use on my tablet.

  Thanks in advance for the help.

  I use an older version of iTunes and in the preferences a lot, I can disable Store, Radio, sharing services, probably genius if I got it. Check all your preferences settings including those you think don't matter such as parental preferences (this is where the store is hidden on mine).  Realize also that iTunes has turned into a simple multimedia player to a 75% of sales and marketing as well as the do-it-all tool (aka bloatware) try too many at once and developers can't even imagine someone (i.e. the daily target user) use it without Internet.  Add on that you try to use an application to control iTunes and something like that is likely to misbehave, willy nilly whenever Apple launches an update.

  Don't forget with wi - fi you are subject to interfering signals other wi - fi services in the region or the stage equipment.

• 8610 all-in One: 8610 printer all-in-one not to pick up WIFI

  I have problems with my printer 8610 do not pick up the Vodafone Pocket WIFI signal. The printer is picking up other WIFI signals in the area but not my internet router? It has become an issue in the last week and was working fine before.

  Hello
  
  Thank you for using the HP Forums.

  Can you do a restore default network, and then connect using the Wireless Setup Wizard?

  These resources show you how:

  Restore the printer network settings

  https://goo.GL/9fyrGS

  Connect a printer with wireless configuration wizard

  https://goo.GL/7G8a91

  After that, you may need to reinstall your software.

  Hope that helps.

• Satellite L30 - 11G can not pick up my WLan network

  Hi all

  I have a Toshiba * Satellite L30-11 G * and I use the model of router D-links * (DIR301) * to set up a wireless network.
  The laptop picked up the network before I formatted the computer after that that he has been infected with a virus and became very slow.

  After formatting and reinstalling windows, the laptop can not meet my network.
  I changed the security settings on the router and set it to WEP (which is the very basic setting) for the network. I reinstalled windows (with all updates) for a second time to eliminate and windows problems could be created to activate the network card pick up the network.

  Although the laptop captures the networks of the district with the same security as my router settings it just will not collect my network.

  Can someone help me with this one please? Thank you.

  If I understand correctly, you can connect to the laptop for the neighbours wireless LAN wireless, but you can't connect the laptop to your WLan router.
  Is this good?

  As far as I know, this laptop was equipped with the Atheros 802.11 B/G WLan card.
  In case I would recommend you check if the wireless network adapter and the router use the same Wlan standard.
  In addition, you can try to disable all the security settings on the router.
  I mean disable encryption, SSID hidden settings, MAC address filtering, firewall, etc.

  Try again to establish the WiFi connection. If you're going to succeed then you may reactivate the router settings