Do not receive the classes in the optional package on managed server

Similar Questions

• Pwerconnect 6224: vlan client computers do not receive the ip address of DHCP server on a different VLAN

  Hello

  I have a prolem routing dhcp requests between the vlan management where DHCP server resides and the other VLANs.

  I have the scenario of base with three VLANS: vlan 10 (management vlan), 20, 30, configured on a Powerconnect 6224 switch L2 mode. This switch is connected to a pfsense router. The router is configured at the package of road between the VLANS and it does it well.

  In Vlan 10, I have a configured DHCP server to use the ip addresses of all the VLANS (10, 20, 30). VLAN 10 client computers receive ip address but not others from other VLANs.

  When I put the ip address in the appropriate range of VLANs manually on computers, I ping the server and I have connectivity.

  This suggests that the problem is with the dhcp package.

  The following is the configuration of the switch:

  Configure
  database of VLAN
  VLAN 10,20,30
  VLAN 1 1 routing
  VLAN 20 2 routing
  VLAN 30 3 routing
  output
  SNTP server time.nist.gov
  clock timezone 1 minutes 0
  battery
  1 1 member
  2 2 Member
  output
  DHCP IP address
  IP address vlan 10
  name of the IP-server 172.16.10.1

  bootpdhcprelay cidridoptmode
  interface vlan 1
  Routing
  IP 172.16.1.1 255.255.255.0
  output
  interface vlan 20
  Routing
  address 172.16.20.1 IP 255.255.255.0
  output
  interface vlan 30
  Routing
  IP 172.16.30.1 255.255.255.0
  output
  level of 20fc49459a1898b923ed3ec7b3e81276 user name 'admin' password encrypted 15
  No spanning tree
  spanning tree priority 0
  l2relay DHCP
  DHCP l2relay VLANs 10, 20-30
  DHCP l2relay circuit-id VLANs 10, 20-30
  !
  interface ethernet 1/g2

  l2relay DHCP
  switchport access vlan 20
  output
  !
  interface ethernet 1/g3
  l2relay DHCP
  switchport access vlan 30
  output
  !
  interface ethernet 1/g21
  switchport access vlan 10
  output
  !
  interface ethernet 1/g22
  switchport access vlan 10
  output
  !
  interface ethernet 1/g23
  switchport access vlan 10
  output
  !

  interface ethernet 1/g24
  switchport mode trunk
  switchport trunk allowed vlan add 10,20,30
  output
  Server SNMP community EyesOfNetwork ro
  SNMP-server community public ro
  output

  I followed the instructions in the powerconnect 6224 user guide, but no progress on this issue.

  Any help will be be grateful.

  Thank you

  Zoubeir

  The DHCP server stores information that could be useful? May need to configure monitoring ports and something as wireshark to monitor DHCP packets. This would help determine where the package is stopping.

  example:

  Console (config) #monitor session 1 source interface 1/g8

  Console (config) #monitor session 1 destination interface 1/g10

  session mode 1 #monitor console (config)

  right now I don't see anything in the config of the switch that stands out. If the DHCP server is configured for option 82, then you will need to include the following command on the switch.

  Example:

  Trust l2relay console #dhcp (config-if-1/g1)

  But I don't think that's our scenario here.

• I'm impossible to connect, and you do not receive the password email when I ask.

  I'm trying to connect with the stored user name and password, but they do not work. I tried new password sent by e-mail, 5 or 6 times in the last 24 hours, but I never received an email.

  Connect to what?

  The extent of the not received the email, have you looked into the Spam folder?

• Could not get the option to 'Create a wireless network' in configuration

  Hi guys

  I am trying to run myRio-1900 as an access point, but I don't have the ability to "Create a wireless network" in its configuration. I installed NOR-RIO 13.1. What could I have done wrong? Have installed something wrong?

  Hey John,

  Have you gone through the steps in this document of reference and do not see the option to set up a network without wire anywhere OR Max or in the web interface?

  http://zone.NI.com/reference/en-XX/help/373925B-01/myriohelp/myrio_creating_wireless_networks/

  Also, have you installed the toolkit myRIO, shown here?

  http://www.NI.com/download/LabVIEW-Myrio-Toolkit-2015/5518/en/

• did not receive the product code for age of empires

  I downloaded Age of Empires 3, but have not received the product code and can't install. Who should I contact?

  Thank you

  Hello

  I'd say contact Microsoft phone support for assistance.

  http://support.Microsoft.com/kb/295539

• Did not receive the last updates of Windows XP.

  Original title: update XP final

  I have not received the final updates for XP today. I tried to install them manually but can't because support for XP is completed. Is there a way I can get them?

  Yes, as of April 8, 2014, these are the latest updates for Windows XP, but since Microsoft has confirmed publicly that they will continue to develop and test the Windows XP security updates - since they are obliged under contract to the many millions of PCs under enterprise agreements including groups like the Government of Britain and the Netherlands.

  So, finally Microsoft kind of will have to offer updates for Windows XP for at least another year.

  They also distribute updates for Windows XP Embedded (plus all ATMs in the world), it is another way of development for those same updates :)

• Unlocked blackBerry Smartphones Software Update has not received the AT & T brand PRIVATE when you use a non - AT & T SIM card

  Dear whom it may concern,

  I saw one of the support forum of Blackberry Web site on "software update, not received the AT & T unlocked brand PRIVATE when you use a non - AT & T SIM card". How can I receive the OTA update in the notification bar?

  Now, my OS is Mashmallow 6.01 build No.. AAF355 (June 1, 2016) or do I have to update (auto loadder) my Priv to AAG873 in order to get the direct OTA from Blackberry in the future.

  Thank you

  Good questions. I can speculate only at this stage. I guess that since it is updated by BB, they use a revision update for all devices to facilitate management. AT & T updates their different, since they have different methods of approval (Note T-mobile even updated as unlocked devices). Unless you want to get specific version of AT & T that could fix something that the other version does not work, I'd wait for the OTA. I did three refills of OS because I couldn't OTA of AT & T, and they take a lot of time. Take the time then to restore and to reconfigure all the settings you had before. Not funny.

  To be more precise questions. Depends on you, but for me, would be updated via OTA only now that it's available. Yes, if you want auto charger, use AT & t. even as before, wait for OTA, unless you have a specific automotive need load the operating system.

• EX 60 does not receive the CUCM phonebook directory

  Cisco EX60 is registered on the CUCM, but it does not receive the phone book. IP phones receive the directory.

  Cisco Services for user data is active and running.

  CUCM system version: 9.1.1.20000 - 5

  EX60 software version: TC6.3.1.f768649

  You must mention the URL of the directory on your EX60 in order to extract the CUCM directory.

  EX60 login go to Configuration > server directory > URL and mention of the URL in this format:

  https://: 8443/cucm-uds/users

  First, you can test by opening this URL in a browser to verify if it is correct.

• Hi, I bought acrobat adobe pro ms with order number: 12287735659 but I have not received the download link and the serial numbers of adobe and had this message there is a problem processing your order, please contact our Service team at the 800 448 custom

  Hi, I bought acrobat adobe pro ms with order number: 12287735659 but I have not received the download link and the serial numbers of adobe and had this message there is a problem processing your order, please contact our Service team customer to 800 448 1642 for assistance. my credit card is already loaded, but not received numbers.please series suggest

  Hi Kunal,

  If the problem still persists, can you please contact the support for this issue through https://helpx.adobe.com/support.html#/top_products.

  Please do not hesitate to me message in person if assistance is needed.

  Concerning

  Stéphane

• Help! Incorrectly entered billing for Dreamweaver account, what can I do? Has not received the letter of confirmation of final order for 72 hours?

  I was paying to get Dreamweaver CC on March 14, 2016, and I was wrongly input from another Adobe account Cloud account.

  I received the order of Confirmation e-mail the same day. Can I change the billing for my PC account again?

  And yet, I have not received the final email to tell me Adobe accept payment in 72 hours.

  Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

• I bought the photo Illustrator and ask the Adobe site plan for individuals with credit cards, but to date I have not received the confirmation email. How can I contact for more information on the good end of the order?

  Hello 11/18/2015 I bought Illustrator photo and ask the Adobe site plan for individuals with credit cards, but to date I have not received the confirmation email. How can I contact for more information on the good end of the order?

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Cannot start Acrobat DC. Could not receive the confirmation e-mail. How can be changed the e-mail address?

  Cannot start Acrobat DC. Could not receive the confirmation e-mail. How can be changed the e-mail address?

  Hello

  The following link will guide you on how to change your email address associated with your Adobe ID

  Change the e-mail address associated with Adobe ID.

  Please follow the steps and let us know how it goes.

  Concerning

  Sukrit diallo

• Can not find the option the Structure of the Insert panel (was: Dreamweaver CC 2015)

  I'm doing a web page in Dreamweaver CC 2015... In the Insert panel I can not find the option "Structure." Can you help me??

  Hello

  With release Dreamwever CC 2015 Insert Menu is restructured and all the options available in the option of the Structure lies in Insert > HTML

  

  You can also find them in to insert Panel by selecting HTML in the drop-down list.

  

  Concerning

  Vivek

• Recently ordered (and order confirmed) "Plan of creative photography of Cloud (one year). I want to cancel it, but during the procedure, I do not even the option "Cancel". How should I proceed?

  Recently ordered (and order confirmed) "Plan of creative photography of Cloud (one year). I want to cancel it, but during the procedure, I do not even the option "Cancel". How should I proceed?

  In order to cancel the order, please contact customer service

  You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  For more information on cancellation: cancel your creative cloud membership

• I do not have the option 'combine files' in the Tools tab.

  I do not have the option 'combine files' tab in tools... what Miss me?

  Acrobat Reader cannot combine files.