Do not result
Search Help and reference manual but can't find where to put "Do not not Record result."
Thank you
JVH
Its a box found on the execution Options for the Properties tab page a steps.
Michael.
Tags: NI Software
Similar Questions
-
So a few months back I noticed that spotlight on my iPhone was not quite working properly. I used a lot to launch applications since I found it much faster than the search for the page on which the application can be located.
But now I slide down and wait... and wait... and wait... and get no results. If I drag to the left half of the time the news will not be displayed even.
I went into the settings of the projector and off "search results" for almost everything and that doesn't seem to help either. So I have no idea what I'm doing wrong, but I would really like for projector to rework. So, I had hoped that the last update to iOS 9.3 might help to solve this problem, but no.
Any ideas?
See if it is fixed into the sleep/wake and the "home" button until the Apple logo appears. -AJ
-
EventInjector for NumLock does not result
I have search high and low (I'm sure that's what everyone says) but I can't get the EventInjector to work. Here's my situation
I have an EditField which takes input like a currency (10.00 or 12.56) field. I have a TextFilter on the ground so that the only acceptable characters are numbers and the '.' It works very well.
Now, I am trying to affect the onFocus() NumLock field (123 in the top right corner) of the EditField. Then I thought, use the EventInjector for the KEY_ALT and the SHIFT_LEFT. Here is my code, which produces no result.
JDE is 4.7
running on devices that have the OS 4.6 and higher only
public EditField amountField(String label, String value, int max, long style){ EditField _field = new EditField(label, value, max, style){ protected void onFocus(int direction){ //Dialog.alert("gained focus"); try { EventInjector.KeyCodeEvent altKeyDown = new EventInjector.KeyCodeEvent( EventInjector.KeyCodeEvent.KEY_DOWN, ((char) Keypad.KEY_ALT), 0); altKeyDown.post(); EventInjector.KeyCodeEvent shiftKeyDown = new EventInjector.KeyCodeEvent( EventInjector.KeyCodeEvent.KEY_DOWN, ((char) Keypad.KEY_SHIFT_LEFT), KeypadListener.STATUS_ALT); shiftKeyDown.post(); EventInjector.invokeEvent( new EventInjector.KeyCodeEvent(EventInjector.KeyCodeEvent.KEY_UP, (char)Keypad.KEY_SHIFT_LEFT, KeypadListener.STATUS_ALT)); EventInjector.invokeEvent( new EventInjector.KeyCodeEvent(EventInjector.KeyCodeEvent.KEY_UP, (char)Keypad.KEY_ALT, 0)); } catch (Exception e) { System.out.println("ExpenseSreen_amountField (Error) " + e.getClass() + ": " + e.getMessage()); } } protected void onUnfocus(){ Dialog.alert("lost focus"); } }; return _field; }
Can anyone suggest what I do wrong?
As a side note, I already have the default permissions for my application to ALLOW for EVERYTHING.
new EditField("Amount: ", "", 10, EditField.FILTER_REAL_NUMERIC);
Everything you need...
-
Why have I not results in Windows 8 research even after indexing?
My research of Windows 8 return no results for documents, even though I know that they are on my computer. For example, when I search the folder of document for files with the .doc extension, it will always return no results. I tried all the indexes of troubleshooting I could find and ensured that all types of file extensions are added to the indexing as well. Someone at - it any other suggestions on how to fix this?
Using File Explorer, or the charms? If you use the charms, you must select the file tab for now - looks like it will be deleted in Windows 8 for a more complete and more generic search location. Also, I heard that the search of the files in the charms often does not work now. Please let me know where you are looking.
-
CALCULATION of POINT recording do not result
I'm back to APEX development after an absence. I am struck a problem that I do not remember how to solve. I have a question that gets its value from calculation. DEBUG the output shows that the calculation is to save the correct value. There is a RESULT = line and another where the new value is empty. Whence come her RESULT and why there at - it of the second line, how can I get rid of them?
0.74073 0,00037 ... The calculation of the point: P2_FIT_EXPRESS_DECOMM_CD, type = FUNCTION_BODY 4 0.74110 0.00097 ... Perform calculations of function body 4 0.74209 0.00284 ... Execute the statement: declare the function x return varchar2 is begin START if: P2_QUIESCENT_CD = 'Y' AND: P2_REALLY_HAVE_DBMS_DATA = 'Y' AND: P2_SINGLE_DISPOSAL = 'Y' AND: P2_ONGOING_MIGRATION = ' no AND: P2_LEGAL_HOLD = ' no AND: P2_SATISFY_DATA_RETENTION = 'Y' AND: P2_ALTERNATIVE_IN_USE = ' no AND: P2_APPLICATION_DEPENDENT = ' don't AND: P2_DBMS_SUPPORTED = 'Y' AND: P2_EXTENSIVE_ARCH_REPORTING = ' don't THEN : P2_FIT_EXPRESS_DECOMM_CD: = 'Y '; OTHER: P2_FIT_EXPRESS_DECOMM_CD: = 'N'; END IF; END; Returns a null value. end; begin wwv_flow.g_computation_result_vc: = x; end; 4 0.74492 0.00170 ... Session state: saved point new 'P2_FIT_EXPRESS_DECOMM_CD' value = 'Y '. 4 0.74661 0.00072 ...... Result = 4 0.74733 0,00037 ... Session state: saved point new value "P2_FIT_EXPRESS_DECOMM_CD" = "" " You have a type of the body of the PL/SQL function. It seems you are setting the value of the element in your function body but then return null that the calculation uses to set the value of the element. Is your body of the function to return the value you want to put your article or put your code in a page to rewrite process.
-
Search / Results Page, not results
Hello, I design a site 'catalogue' for my work, which requires an element of "products of research".
I read that I need to do 'dynamic' in PHP and MySQL and have learned how to do this, and so far I've managed to:
(1) configure WAMP
(2) create "4 products (will be possibly 300 when I know it works)" example of database and make it 'talk' to Dreamweaver (CS6)
(3) set up the search form"" button.
(4) create a page of search_results.php with dynamic table to contain the data / recordset
(5) to obtain the correct results when I 'test' for the recordset as shown below: (ie using the 'black' as shown in the test search term that correctly performs a product on the 4 that has black in the description column)
Click on the photo below to see:
(6) looks like it added to the table correctly in Design view in dreamweaver:
(7) but when I Preview in browser and type in 'black' in the search box I get no results? I have only the titles of the columns? (image below the results I get in the browser):
I searched the internet / adobe help and have the "dummies" books and DVD from lynda.com, but I have not yet to find clear instructions, stage by step on how to do that correctly - all sources tends to miss important steps and offers no solutions - according to lynda.com training dvd, it should now work! Anyone know what I should do - I seem to be going round in circles with this one? Thank you.
PS I'm a designer, a coder and not make a dynamic site for the first time without knowledge of code, so please be nice
don't worry - I've thought about it.
-
Session variable does not result in responses
Hello
I have a block of Session initialization and I the target assigned to a variable region_info variable. My SQL is this "select HS region. The user_info_table where UPPER (USER_ID) = UPPER(':USER'). It gives me the correct results in RPD.
In the answers and the filter, I say region is equivalent to / in NQ_SESSION. Region_info up to this point it works fine.
How to change to more than one line. I tried horizontal initialization and I am getting an error saying NQ_SESSION. Region_info has no value definition. How can I make it work if the initialization block returns multiple lines and in the responses, if I have them both in my filter?
Help, please. Thank you.SSK,
No, it will not work you cannot use meets fx
http://download.Oracle.com/docs/CD/E12096_01/books/AdminTool/admintool_Variables5.html
http://108obiee.blogspot.com/2009/10/using-multiple-values-row-wise-session.html
Thank you
Saichand.v -
Usage is invited by displaying only not results
Hello
I have a situation here where I want to show all the live reports that are available, then clicking on the report that I will be able to to located report displays details such as the dashboard and dashboard page.
I created the report which is the display name report and then 'value of Interaction'-> navigated in column format and mentioned the other report that shows the details of the reports.
Then created the detailed report and bear the name of report in the detailed report 'is requested '.
But when I click on the report details report could go pick up details of the report gives me the error below
No results
All data is not cause to the specified criteria. This is often caused by the application of filters that are too restrictive or contain incorrect values. Please check your filters to ask and try again. The currently applied filters are listed below.
The new name is equal to Scripture
I think the problem is that if it uses equal to is not able to recover the data, but if I choose "contains all the" filter in the detail report, it shows me the data.
But using "is invited" is equal to. So how do pass the name of the report for the detailed report and use a SQL in the filter.
Rgds,
AmitTry to do this:
(1) in the main report and the column containing the names of report, apply the TRIM TIME function. Use value interaction on this column.
(2) in the report destination, apply TRIM function TO the column which houses report names and then apply the filter is "invited" to this column.
Your test results...
-
CFEXECUTE / ant script return do not result in the CF
I have a batch script that is running an ant script that is running "cvs log h application.cfm" on the cvs server.
When I run the script commands manually on the command line, everything works fine.
When I run the command via CFEXECUTE script, the batch works very well, the ant script works fine, but the cvs command does not seem to do anything. The results of the tag are:
[echo] front
[echo] after
As you will see the (unchanged with the exception of the cvsroot attribute) attached ant script, echoes are and part of the cvs command.
When running from the command line, I get the results of the cvs log command between these lines, but I get nothing with the CF.
Any ideas on how to get this to work at all will be greatly appreciated.
I use 7.01, but I corrected the tag CFEXECUTE by restarting the service CF twice.
I also managed to finally get the CVS little work - changing : ext: to : ssh: -which I'm sure I've tried before and it wouldn't work, but it works now so I'm very happy.
-
Self-join query does not result
Hello
I have 2 of oracle database 10 g.
When I run the following query
Select aa.snap_date as '2005', aa.cntryid as '2005id", aa.cntrynam as"2005name. "
BB.snap_date as '2007', bb.cntryid as '2007id', bb.cntrynam as '2007name '.
Of
(select a.snap_date, a.cntryid, a.cntrynam
from fis_snap.country where a.snap_date = to_date (November 30, 2005 "," MM/DD/YYYY ')) aa.
(select b.snap_date, b.cntryid, b.cntrynam
fis_snap.country b where b.snap_date = to_date (April 30, 2007 ',' DD/MM/YYYY ')) bb
where aa.cntryid = bb.cntryid;
I get the result
2005, 2005id, 2005name, 2007, 2007id, 2007name
30/11/2005, CAN CAN, Canada 30/04/2007, Canada
30/11/2005, CHN, China, 30/04/2007, CHN, China
30/11/2005, ENG, England, 30/04/2007, ENG, England
30/11/2005, GER, Germany, 30/04/2007, ALL, Germany
30/11/2005, JPN, Japan, 30/04/2007, JPN, Japan
30/11/2005, KOR, South Korea, 30/04/2007, KOR, South Korea
30/11/2005, MEX, Mexico, 30/04/2007, MEX, Mexico
30/11/2005, TWN, Taiwan, 30/04/2007, TWN, Taiwan
30/11/2005, U.S.., United States, 30/04/2007, U.S.., United States of America
30/11/2005, VAR, various, 30/04/2007, VAR, various
I am trying to find the same result with the following query:
Select a.snap_date as '2005', a.cntryid as '2005i", a.cntrynam as"2005nam. "
b.snap_date as '2007', b.cntryid as '2007i', b.cntrynam as '2007nam '.
of fis_snap.country as a, fis_snap.country b
where a.snap_date = November 30, 2005.
and
b.snap_date = April 30, 2007.
and
a.cntryid = b.cntryid;
but I get the error ORA-00933: SQL not correctly completed command.
I'm not able to catch the error, please help.
Thank you.Hello
You need to format your code.
When posting on this forum code, type the 6 characters
{code}
(small letters only, inside curly braces) before and after the code, to keep the spacing.In Oracle, you can use the keyword, such AS when you define a column alias, but not when you define a table alias.
I know that it is incoherent and not the way it is in other databases, but that's how it is in Oracle.Change your FROM clause:
from fis_snap.country a , fis_snap.country b
in other words, lose the word AS before each alias.
Also, it is probably not yet where the error, but you should never compare a DATE to a VARCHAR2.
Explicitly convert the DATE into a VARCHAR2 or, more often, the VARCHAR2 to a DATE, like this:b.snap_date = TO_DATE ( '04/30/2007' , 'DD/MM/YYYY' )
-
Property RemotePanel.ConnToServers return do not results
Hello!
I'm trying to detect connections from the remote panel to my labview application. I created this chiseled of the following code:
When I run the present and then connect remotely with this other computer sitting next to me, the picture remains empty.
I'm using LabVIEW 2009. Any input is greatly appreciated.
It turns out that this particular property of the reference App you'll get not facing away from struggling. Don't know what this particular property is intended.
The list of connections remote panel is accessed through a reference of VI Invoke node. If you open a reference to the current VI, you can get a list of connections of the remote panel and make decisions based on this list:
-Nic
-
I have an Officejet L7780 which is not driven by the document feeder. He finds himself with the first page and try to in the page but it gets stuck with it. I wasn't able to get through, but I can enter a part of the page that is stuck and shoot OK. It seems that the rollers do not work much more. Is this something that can be corrected/fixed/replaced?
Hello
Make sure you use media supported (weight/type). If you frequently use your ADF, you can have an accumulation on the pick up rollers. I have included a link below that describes how to clean them and how do I check to make sure that there is no piece of paper stuck under the hood of the ADF that would prevent to draw correctly. Good luck!
-
SYS_CONTEXT return do not results
Hi - noobie question, sorry in advance.
I am a student at OCA, and I came across a feature called SYS_CONTEXT
[http://docs.oracle.com/cd/E11882_01/server.112/e26088/functions184.htm#SQLRF06117]
I'm trying to retrieve my IP using SYS_CONTEXT ('USERENV', 'IPAddress'). SQL * more accepting but nothing back and I don't know why. I tried a few arguments (e.g. SYS_CONTEXT (' USERENV', 'AUTHENTICATION_DATA' ") but still nothing is returned.) Still using USERENV as I believe that it is the namespace built into Oracle.
all the tips at this stage.
PS I am connected to OracleXE as SYSTEMHow you connect to the database? And it is a database that is installed on your local computer?
If you use SQL * more
sqlplus scott/tiger
creates a connection needed to the database. You're not going via TCP/IP so that you have an IP address.
sqlplus scott/tiger@tns_alias
will go over TCP/IP to the listener and create a 'normal' connection that will have an IP address.
Justin
-
PDF record size does not result.
Bridge CS4
I have a series of images that are 1280x2048@300dpi. I'm trying to save them in PDF with one image per page. I got all the settings to work, except for the size.
I'm saving with a custom layout and size, with 1280px width, height 2048px, quality of 300 PPI, 1 column and 1 row, without margins.
However, when I save the PDF file and open it in preview and display it at full size, it is much more important than what it should be. He appears at about 1900 pixels in width and of course it quite pixelated.
Anyone know why this is happening and how can I stop it?
SOLUTION:
OK, so I thought I'd give it. It seems that the problem was not in the way that bridge saves the file, but in the way it was posted. I tried preview and Adobe Reader, and they both display the PDF to a larger size. For this reason, I assumed the problem was not for that purpose.
However, I diging autour in settings of Preview and found an option that I never knew existed before, because I do not use very often spotted (only for PDF files and it is rare). There is an option to set the definition of 100% zoom. It can be either printable actual size compared to your screen, or it can be a 1:1 pixel ratio. And this parameter exists twice: once for the image files and once for a PDF file. Option for PDF files has been set to printable size. Once I changed it to 1:1 pixel display, PDF has begun to display to the size I expected to.
-
Comparison of the post not producing desired do not result
During my form validation before update of database, I check if the 'hpropid' field is empty and echo a message appropriate (this works), then check if the field is between 3-15 characters (this also works), I finally check that the displayed value new is different from the original value by comparing the $_POST ['vpr'] to $_POST ['hpropid'] This is where I'm having problems, mainly if the values are the same I Don t want to search on the database to check if all records have the same reference number, but if the values are different I don't want she runs research and echo $error ['errprop'] error message.
When the values are the same, and I know that the values are the same that I placed the code to echo values, the search on the database is always run when it shouldn´t if my comparison works which creates the error which is incorrect. It seems that the line that causes my problem is: if ($_POST ["RVP"]! = $_POST ['hpropid']) {-fact echo the value of vpr is C23 and the value of hpropid is C23, so why if they are not equal the meaasge research and database error still gets executed?}
I pasted the full piece of code validation below:
Any help with this will be appreciated, thanks in advance.
If created empty field the error message at the echo in the body
If (empty($_POST['hpropid'])) {}
$error ['errpropid'] = 'Please enter the property reference. " }Otherwise, if the field not between 3 to 15 characters create error message to echo in the body
else if (! empty($_POST['hpropid'])) {/ / check propid}
$_POST ['hpropid'] = trim($_POST['hpropid']);
$propid = $_POST ['hpropid'];
If {(strlen ($propid) < 3)
$error ['errpropid'] = 'Please enter a property reference that contains 3 to 15 characters';
}
$_POST ['hpropid'] = trim($_POST['hpropid']);
$propid = $_POST ['hpropid'];
If {(strlen ($propid) > 15)
$error ['errpropid'] = 'Please enter a property reference that contains 3 to 15 characters';
}
}If the original value and the new value differ run the check on the database and the error message created
If the values are the same Don t run the serach on the database that nothing has been changed in this area
If (isset($_POST['vpr'])) {}
{If ($_POST ["RVP"]! = {$_POST ['hpropid']})}
echo POST vpr is: '. $_POST ["RVP"]. ' < br / > ';
echo hpropid POST is: '. $_POST ['hpropid']. ' < br / > ';$LoginRS__query = sprintf ("SELECT hpropid FROM holidayletstable WHERE hpropid = %s", GetSQLValueString ($propid, "text") ");
@mysql_select_db ($database_connAdd, $connAdd);
$LoginRS = mysql_query ($LoginRS__query, $connAdd) or die (mysql_error ());
$loginFoundUser = mysql_num_rows ($LoginRS);If there is a line in the database, the propid was found - can not match the requested reference
{if ($loginFoundUser)}
$error ["errprop"] = "$propid is already in use. Please enter a different property reference. « ;
}
}
}
}tessimon wrote:
Why if they are not equal the meaasge research database and error still become executed?
Don't know. It may be because you have applied trim() to one, but not the other. Your code is rather repetitive and contains some errors (maybe you didn't copy it exactly in there). Try this:
$error = array(); // if field empty created error message to echo in body if (empty($_POST['hpropid'])) { $error['errpropid'] = 'Please enter the property reference'; } else { $_POST['hpropid'] = trim($_POST['hpropid']); $len = strlen($_POST['hpropid']); if ($len < 3 || $len > 15) { $error['errpropid'] = 'Please enter a property reference that contains 3 - 15 characters'; } } if (!$error && isset($_POST['vpr'])) { $_POST['vpr'] = trim($_POST['vpr']); // if original value and new value are different run check // on the database and created error message // if values are the same don´t run the serach on the database // as nothing has been changed in this field if ($_POST['vpr'] != $_POST['hpropid']) { echo 'POST vpr is: ' . $_POST['vpr'] . '
'; echo 'POST hpropid is: ' . $_POST['hpropid'] . '
'; $LoginRS__query = sprintf("SELECT hpropid FROM holidayletstable WHERE hpropid=%s", GetSQLValueString($propid, "text")); mysql_select_db($database_connAdd, $connAdd); $LoginRS=mysql_query($LoginRS__query, $connAdd) or die(mysql_error()); $loginFoundUser = mysql_num_rows($LoginRS); //if there is a row in the database, the propid was found // - can not add the requested reference if($loginFoundUser) { $error['errprop'] = "$propid is already in use. Please enter a different property reference."; } } }
Maybe you are looking for
-
15 12tx ro: deactivation of the system 76283904
Please let me know how do I restart
-
How to use webcam while chatting?
Original title: web camara. How to use my camara web when chating l
-
How can I restore the help & assistance in Vista section
I need to remove the x in each title to restore to their original state.
-
EA6500 (v1) constantly reboots with the new Firmware (1.1.29)
The latest firmware available (Build 162351) Ver.1.1.29 for my EA6500 (v1) is very unstable, and I had to roll back to 1.1.28 (Build 146072). This occurs when the two bands of wireless network are enabled. The router works for 5-10 minutes (sometimes
-
Errors downloading the ZIP file
I am submitting my first version BB for approval. I followed the instructions here: https://developer.BlackBerry.com/DevZone/blackberryworld/parts_of_a_release_file.html and created a ZIP file with the following content: drwxr-xr-x 4 EnglishBundle_1