do not start dbconsole on the new database duplicate

Similar Questions

• whenever I touched icon it will not start and sent the report but heard nothing back

  Since yesterday, when I click on the firefox icon that it does not start, it shows the screen of crash reporter and said that he will attempt to restart, but when I type restarts, it crashes again. When I hit exit firefox sends report but ive heard nothing back. not sure if I need to download the new copy or wait for the response.

  You can check if you can start Firefox in Safe Mode by holding down the shift/Options key.

  • https://support.Mozilla.org/KB/safe+mode

  Try to start Firefox with the subject: blank page by creating a copy of the current Office Firefox shortcut and add a space and -url "about: Virgin" in the target field.

• Satellite A210-199 does not start successfully after the BIOS update

  Hello

  I've got Sat A210-199.
  Yesterday I updated the BIOS, and after that problems occurred:

  While restarting my computer does not start. When I enter the BIOS after a while, it shuts down.
  I guess all this because the temperature of the CPU:

  When I do nothing it is 77 C. I don't think it's normal: (.)
  Computer is very recent, so it's probably not dust inside. And it's so hot from the start, but after the new BIOS, something bad happens.

  Why this temp is so high?
  There is no any process background or something.
  Is this normal?
  And what about this new BIOS?

  To be honest, something like this should not happen. I really don't understand why this is happening. I have updated the BIOS on friends A200 and mine P200 and everything works fine. Here on this forum we can only speculate on this issue, but what you need exactly's professional opinion.

  This probably not help but install recovery image and check with the factory settings. Make sure you also on the lower side cooling fan is not blocked and the laptop can be cooled properly. If the problem persists, you should contact the nearest authorized maintainer and clarify this issue.

  Sorry, but I don't really know what you can do in this situation. I don't see any other way to solve this problem.

  Good luck!

• How to reconnect the new database with oracle and oracle mid infrastructure

  course oracle environment;
  Database; 10gr 2 (10.2.0.1) old-SID: gtxprod host: 10.30.100.199
  new database; 10gr 2 (10.2.0.1) - SID: gtxprod2 host: 10.40.110.199
  application sever. 10.2.0.1 (oracle mid level.) and oracle infra SSO, forms, reports, portal.
  
  problem;
  I try to reconnect from the application to the new database server. I do not know how?
  
  I went to /opt/oracle/10ggtxinf/network/admin/tnsnames.ora

  # tnsnames.ora Network Configuration File: /opt/oracle/10gasr2inf/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  asdb.gtx.com =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = isdev.gtx.com)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME =asdb.gtx.com)
      )
    )
  
  
  gtxprod.gtx.com =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = gtxprod.gtx.com)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SID = gtxprod)
      )
    )
  
  gtxprod2.gtx.com =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = gtxprod2.gtx.com)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SID = gtxprod2)
      )
    )

  In application of the oracle infra. How Asian Bank of development of database instance can connected with the new data base gtxprod2?
  
  In Forms Server, based on a Web site, if go to Forms Server, I can see tns.ora but I can't see anything to update to the new database.
  
  you could give me information how understand this problem?
  
  Thank you very much in advance

  Hi Wen,

  As you have created a new database 'gtxprod2' so the Stanley database should be in place
  cmd--> lsnrctl status
  That you have even made changes to 10ggtxinf/network/admin/tnsnames.ora
  do the same entry in the oraclebi/network/admin/tnsname.ora file

  You can check if your new entry is rite of
  tnsping gtxprod2 (>)
  Now you ask how the application will come to know what database to point to
  Go to oracle AS
  As using your forms and reports go to oraclebi/forms/server/formsweb.cfg

  At the end of the file, there might be a few entries
  for example
  [test]
  envFile = test.env
  Form = LOGIN_ENT.fmx
  LookAndFeel = oracle
  separateFrame = true
  UserID=nrs_fd/nrs_fd@fixdep
  SplashScreen = NO
  logo = NO
  Background = No.
  color = auto
  make = yes
  Archive = frmall.jar
  archive_jini = frmall_jinit.jar, frmwebutil.jar, Jacob.jar, icons.jar
  ImageBase codebase =
  term = frmpcweb.res
  baseHTML = webutilbase.htm
  baseHTMLjinitiator = webutiljini.htm
  baseHTMLjpi = webutiljpi.htm
  WebUtilArchive = frmwebutil.jar, jacob.jar

  "userid=nrs_fd/nrs_fd@fixdep" IE (username) / (password) @tnsname
  the following entry specifies what database, the application must point to

  If your using a war file, you must create a data source and as datasource, you must specify the tnsname input

  Concerning
  Fabian

• Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Question
  Firefox tries to update my version 8.0 to version 9.0.1. I'm not willing to do because the Norton Toolbar is not yet compatible with the new version of Firefox. How can I get firefox to stop trying to update each time I open the application?

  Firefox 9 is Compatible with Norton 2011, 2012, 360 v5. See:

  • http://community.Norton.com/T5/Norton-Internet-security-Norton/Firefox-9-support-for-Norton-toolbar/TD-p/615563

• "When try to turn on my computer: Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid

  Original title: configuration of the CRA

  Hi, I got this message then try to turn on my computer:

  "Windows did not start because of the following ARC firmware boot configuration problem: the ' osload partition ' parameter setting is invalid. "Please check the Windows documentation about the configuration option BOW and your reference manuals of the equipment for more information.

  can someone help me?

  Hi sugenghariyono,

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  ·         Are you able to boot to the desktop?

  Follow the steps in the article.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  For reference:

  Advanced Troubleshooting for General startup problems in Windows XP

• Vista will not start. Verifying the integrity of system files and repair has no ErrorCode = 0 x 2 HELP PLEASE!

  ASUS PC, Windows Vist Home premium, all updates.

  Out of the blue, it will not start.  Access the start scrolling (the one just before logon) screen and it just stops.

  Twice I ran Vista check utility.  The first time, I chose to do the system restore to previous state.  Restarted.  Always off.  The second time, it took much longer and from what I can see.  All TESTS PASS, except one:

  Repair action: repair and checking of the filesystem Integrety

  Result: failed. Error code = 0 x 2

  Time required: 6206818ms

  I get no blue screen, I can't even any screen!

  I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation.  I don't know that I could reinstall if I get a code (randomly?) different generated software.

  I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.

  Thanks for any help!

  The test fails (SFC) checks for corruption in the files on your system.  If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.

  In fact, look like a hardware problem.  Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision).  I don't know what hardware component.

  If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer).  This should give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, try slaving the drive to another system and access the data in this way.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. » __

  Yahoo messinger does not start, he said: "the application failed to start because its side-by-side configuration is incorrect. Check the log of events applications for more details. »

  UM. I have no idea what that means, I never had that in my 20s I was using a computer.  Please help, someone!

  You can get the Chkdsk to run in the General Windows interface by following these instructions?

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Your command prompt Mode works without failure or a boot?

  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  It works if you test with another user, you will need to create one to test with?

  System Restore and the System File Checker is able to fix anything?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you tested malware?  I see a lot of recommendations here for programs such as -

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntispyware
  http://SUPERAntiSpyware.com/

• Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem

  Hi people

  I'm on Windows 8, and in these last days, I get this message

  " " Windows Update was not able to verify the new updates for the last 30 days, go to windows update to resolve this problem"

  It is on a blue banner that goes directly to the screen and it is very annoying

  I get updates through so I do not understand this

  Any help would be great

  PS I have tryied the restoration of the system, and it's always the same

  Lee was soon

  Original title: looking for some help please

  Hi Lee,.

  I had this same problem and it drove me crazy, but I solved it.

  I clicked on the link above that 'Shubham Chin"gave, and in this link all the topic, if you click on the topic" my PC is not responding all by searching for the or to install updates.

  below that it will then say "try to run windows update convenience store", click on that and it should get rid of this very annoying pop to the top and other problems with your laptop... hope I helped :)

• E.M.P. 11.1.2.1 repointing to the new database

  Hi all;

  Need of your advice here;

  I had a requirement for re-pointer the EPM environment to the other (new) database. I just want to share my point of view how this can be done please correct me if I'm wrong.

  (1) the relational database of the former backup

  (2) backup the \Oracle\Middleware\ file of all servers in the EMP

  (3) the registry backup

  4) clone or COPY all schemas (HFM, planning, Essbase, FDM.. etc) to the database

  Then

  (4) remove the respective environmental USER_PROJECTS folders

  5) RUN the CONFIGURATION TOOL and then provide the NEW database server and port details. Update the TNSNAMES.ora file with the new database.

  (6) repeat step 5 for all other components

  OR

  Is there a way we can change the PROPERTIES file with the Reconfiguration pointing to the new database of execution? Please notify.

  Thank you

  UB.

  Yes you must reconfigure on these servers, but it is only shared services registry which needs configuration to point to the new database, Essbase uses the information updated in reg.properties.

  Try it and see.

  See you soon

  John

• Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.

  Why you're not able to get the new June 20th, 2016 updates on your creative cloud, if you are running Windows 7.
  
  So I spent all day on this because Adobe did not anywhere that I could find it. But I'm hoping some of you to save a lot of time wasted... you can't upgrade to the latest version of the application if you have not all updates to Windows 7.

  
  

  If you're like me and do not want anything to do with the Windows updates... you may encounter the same problem. Summer/don't I am not at all interested in Windows 10 (who they are sneaking into regular updates) so I don't usually have enabled updates. If you don't... you cannot upgrade your program to the latest version. Creative cloud not even give the option.

  
  

  I think it's the Microsoft Visual C++ or something like that who needs update to run the latest version of the software... If you do not have it on your system, you do not install the new updates properly, but be careful not to download sneaky windows 10 "update." Know how it's called blindly here before update you.

  I hope that helps some of you save a whole day unnecessarily.

  Some programs on a win os to visual c ++ 2015, Download Visual C++ Redistributable for Visual Studio 2015 of official Microsoft Download Center

• When starting lightroom on the new drive 6 I get error - cannot find solution

  When starting lightroom on the new disk 6 (an old crashed) I get the message that serial number is already in use by the maximum number of computers...

  In 6 days I'll be off-license - quick help will be appreciated, I can't find a way to communicate with the service to the customer or support and look for here the solution is pretty much a cycle that repeats of frustration.

  Best for all

  Christophe

  I on a Mac OS 10.10.5

  LR 6 bought 2015

  Moving to download, installation, setting up

  Hello

  Please see "Activation limit reached" or "connection error impossible ' with Adobe applications

  Hope that helps!

  Kind regards

  Sheena

• Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Hi rogerk94701487,

  Could you please check the event viewer and let me know the path of the defective Module once.

  How to check the event viewer: Photoshop CC 2015 crashing very frequently

  Kind regards

  Tanuj

• I am running Acrobat 9 Pro (9.5.5).  Do we not have to buy the new version if we have never updated?  Or we have the right to upgrade to the latest version.

  I am running Acrobat 9 Pro (9.5.5).  Do we not have to buy the new version if we have never updated?  Or we have the right to upgrade to the latest version.

  I'm not really clear on the intent of your question.  If you can get the latest version you want to buy it.  When you go to buy, you should be able to see if it has an option to buy an update of the version you currently have.  I can't find the purchase page to check it out myself... I can only find the subscription option.

• Downloaded for free trial Illustrator. Said the trial took end. Hey! He has not started! What the devil?

  Downloaded for free trial Illustrator. Said the trial took end. Hey! He has not started! What the devil?

  This is how Adobe gives free trials? I have nothing. How can I contact Adobe for this actually correct?

  It's not the end of the beginning, he never started. None of the listed reasons were involved. He said even that the download was successful. Thank you for answering, Ned. I will not, of course, buy Illustrator now, I had planned to do. Bad on you Adobe!