PIX v7 speaks to talk about vpn access via the hub of pix

Similar Questions

• Talk about screen accessibility

  I love the option of screen talk and share with students with reading disabilities. My problem is that students are having problems turning on with the stroke of 2 fingers.  He will often return the page to the top, pull up the safari web address entered or even drop the Notification Center. Is this there any other way to market that requires less precision?   The best scenario would be the clik triple but can't seem to find a way to get there.  TIA

  Hi, Tdcraw.

  Please visit Apple support communities.

  I see that you are looking for an alternative to option screen talk as there were some difficulties to use the sweep two fingers.  While there is currently not an option to set the precision slide, another option would be to ask Siri to talk about the rear screen for students.  You can access Siri by pressing and holding the button Home button until the message asking you, "What?" that can help you with Then say "talk to the screen."

  Use Siri on your iPhone, iPad or iPod touch

  Talk about screen

  If you have a hard time reading the text on your iOS device, use screen speak for read you your e-mail, iMessages, web pages and books. Put the screen talk and slide down from the top with two fingers, or just tell Siri screen talking and have all read of the page content. You can adjust the dialect voices and speaking rate, and words highlighted as long as they are read.

  Accessibility

  See you soon

• ASA5505 can transfer clients to remote VPN access to the local network

  I have currently ASA 5505 and 2911-router and I am trying to configure the VPN topology.

  Can ASA5505 you transmit to remote VPN access clients LAN operated by another router?

  These two cases are possible? :

  (1) ASA 5505 and 2911-router are separate WAN interfaces, each connected directly to the ISP. But so can I connect an other interfaces LAN of ASA 5505 in a switch managed by 2911 router customers to distance-SSL-VPN to inject into the local network managed by the router?
  (2) ASA 5505 is behind router-2911. May 2911 router address public ip or public ip address VPN-access attempts have directly be sent to ASA 5505 when there is only a single public ip address address available?
  Long put short, ASA 5505 can inject its clients to remote-access-VPN as one of the hosts on the local network managed by 2911-router?
  Thank you.

  I could help you more if you can explain the purpose of this configuration and connectivity between the router and ASA.

  You can activate the reverse route on the dynamic plane on the SAA. The ASA will install a static route to the customer on the routing table. You can use a routing protocol to redistribute static routes to your switch on the side of LAN of the SAA.

• VPN access to the not directly connected networks

  Hello

  I have a 5510 which is used for Client VPN access and there is something simple that I can't work.

  The VPN part works very well with AAA on a CBS.

  But what does not is access to networks that are not directly connected to the inside interface.

  That is to say the VPN users can connect to the network within the Interface (say 192.168.0.0/24) but not a 10.0.0.0/8 network which is connected through 192.168.0.1 router.

  I have the static routes in Routing and firewall all showing the way back to the firewall on all the other networks, but I don't get more far the 192.168.0.1 router...

  I use split tunneling and pass all of the private over the VPN - internet networks is used through the own local access to clients.

  Can someone help me out here?

  Thank you.

  Fraser

  PS: have the same type of access on a 7206VXR and soft, everything can be consulted and which is necessary - but I would like to move this service to the ASA.

  Fraser

  I don't understand the ASDM parts as you suggest. The code would be great.

  I would also recommend control ACL applied to the inside interface (if any) that it allows traffic as

  inside_access_in list of permitted access 10.0.0.0 255.0.0.0 vpnsubnet vpnnetmask

  If still no joy, attach your config sanitized, would be useful for me to diagnose.

  Concerning

• Cisco ASA 5505 remote VPN access to the local network

  I have installed two ASA 5505 VPN site to site that works perfectly.  Now, I also need to have 1 customer site to remote access VPN with Cisco VPN dialer.  I can get the VPN dialer to connect the VPN and get a VPN IP address, but I do not have access to the remote network.  can someone take a look and see what I'm missing?  I have attached the ASA running config.

  Apologize for the misunderstanding.

  To access the remote vpn client 10.10.100.x subnet, the vpn-filter ACL is the opposite.

  Please please share the following ACL:

  FROM: / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  outside_cryptomapVPN list of allowed ip extended access any 10.10.20.0 255.255.255.224

  TO:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 cm 5.4pt cm 0 5.4pt ; mso-para-marge-haut : 0 cm ; mso-para-marge-droit : 0 cm ; mso-para-marge-bas : 10.0pt ; mso-para-marge-gauche : 0 cm ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}

  outside_cryptomapVPN to access extended list ip 10.10.20.0 allow 255.255.255.224 all

  Hope that helps.

• "NMH410 do not have access via the Explorer: name of local device already in use.

  I can't connect with my NMH410 through Explorer. It worked fine, but I must have done something wrong. Device name Local message already in use keeps popping up, even after the removal of the former as links indicated elsewhere. I changed the name of the device backward (which may be where it started). Also devices that were not previously connected Gets the same response. I tried on XP and Vista. I have also a router Linksys (WRT610N) that had me install Home Network Defender. It was a pain to get rid of it and I would not be surprised if this is part of the problem.

  I'm running out of options. I would consider same formatting for all start over, but prefer not because I have to get all my MP3 somewhere somehow... Help, please.

  Bart

  Hi bartled,

  I suggest you try to do a hard reset on your NMH410. To do a reset, while the device in operation - press the reset for 10 seconds-, and then unplug the cable (keep pressing the reset button) - wait 10 seconds - reconnect the power cable (by pressing the reset button) - wait 10 seconds before you release the reset button. Once the lights are solid, check out the "friendly name" of your NMH410 via the LCD screen. It should be to the default name "Mediahub. Try to use 'Mediahub' on your browser and check if you can access the user interface of your device.

  See you soon!

• APPCRASH URXDIALER. DLL - MACHINE of WINDOWS 7 - f5 vpn accessed via browser

  The failing application name: IEXPLORE. EXE, version: 10.0.9200.16866, time stamp: 0 x 53211297

  Name of the failed module: urxdialer.dll, version: 7091.2013.1211.1151, time stamp: 0x52a859f9

  Exception code: 0xc0000005

  Offset: 0x0000c531

  ID of the process failed: 0 x 1204

  Start time of application vulnerabilities: 0x01cf60c8e43f19c4

  The failing application path: C:\Program Files (x 86) \Internet Explorer\IEXPLORE. EXE

  Path of the failing module: C:\Windows\Downloaded Program Files\urxdialer.dll

  users who use IE 9 and 10 of the IE are broken at the launch of the f5 Big IP VPN via a web browser.  Anyone encountered this?

  Hello

  I apologize for the delay in response.

  I suggest you to post the question on the link below. It is Support for Windows 7 TechNet forums. They are the team devoted to the issue that you are facing.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Feel free to write us if you have any other questions about Windows.

• Securing of Captivate movies and access via the Web

  Hi all
  
  My apologies if this is a little off topic, but I just thought that someone out there has fallen on this problem and come upwards with a solution. All the tips / pointers thank you gratefully received!
  
  I would create a bunch of Captivate movies that will be accessible on the web. Different customers/clients need to access different movies. What I would really like to be able to do is post these movies on my site OR a site offering secure accommodation.
  
  The customer would be given a URL - when you can access the URL, they are going to a login page (and provide a password), and then be presented with a start page / menu where they can access movies that relate to the software they use (customers all use different versions of the software as well as movies are subtly different for each).
  
  A grave on this type of hosting solution or has any ideas for this scenario?
  
  Thank you very much
  Craig

  Craig,
  I think you have the wrong end of the stick about htaccess
  I made a small example for you here protected folder
  username and password = larry

  a good host is http://ukwebsolutionsdirect.co.uk/hosting.php
  I use them for all my domains/site and they are cheap

  Paul

• Remote access via the internet between Windows 7 PCs and a Windows 7 Pro and a Windows PC Vista Home

  I am running Windows 7 Professional on a laptop Dell Studio 1569 (64-bit). I want remote access to one Dell Inspiron, Windows 7 family, but also an another Dell Inspiron running Windows Vista Home edition, via an IP connection over the internet. I can do this and if so, how? I used GoToMeeting.com, but I hope that I can avoid paying their connecting directly. Thanks in advance.

  Take a look at TeamViewer. Boulder computer Maven

• Problem with progress-access via the icon on the screen

  I have Windows 7 on my DELL laptop. When you try to open any program through its icon on the screen, another specific program is open.

  Hello

  Please contact Microsoft Community.

  You can try these methods to solve the problem.

  Method 1:

  
  Step 1: check if the problem exists in Mode without failure.

  You can follow the instructions here to start the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Check if you are able to access the records.
   
  Step 2: The problem of clean boot.
  If the problem does not exist in safe mode, a program can be at the origin of this problem.
  You can start the computer in a clean boot to solve problems and identify a cause.

  http://support.Microsoft.com/kb/929135

  Note: Once the diagnosis is made please follow "step 3: reset the computer to start as usual" on the article to start the computer in normal mode.
   

  Method 2: Run the Security Analyzer.

  You can check for a virus running the Microsoft Safety Scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. Feel fresh coming back to us for assistance.

   

• retrieve the value column access via the variable name of the column

  I need to build a function of validation with this condition:

  The data model is like this:

  We have an array of items_general, with its id and data.

  Then we have specific tables, let's say... item_especific1, item_especific2 item_especificn. They have the same as the table of the item_general pk and fk against item_general

  Each element is in one of the tables item_specific and items_general.

  
  

  Now, the validation feature: I need to check for an element, if some special columns of the item_especificx table are null and will raise an error if this occurs.

  I got the name of especific_table and the list of names of particular column stored in another table.

  
  

  I guess I can browse this list of column table to build a clause concatening Dynamics 'and' | column_name | 'is nothing', but I'm not a big fan of the dynamic sql.

  
  

  Can you think of a better solution? Any way to access the value of the column by using the column name, as if it were a varchar2 key index?
  

  
  

  
  

  
  

  Nope, no filter.

  When you have a funky data like that model, you're destined to dynamic sql and other assortment of headaches.

• 6 of Lightroom on iMac. Unable to access via the icon.

  I have been using Lightroom 6 on my iMac since update to Lightroom 5 a year ago.

  I access LR from an icon, but today it did not work. The opening page of LR blinks once and then turns off.

  I can access LR 5 from the LR icon in Launchpad.

  When I go in LR 5 all my files are there but many vignettes are suppressed. Without doubt, the ones I put in LR 6.

  Please can you help me to get back to where I was last night and go back to the icon on the dock LR6.

  Thank you.

  Peter

  Hello Benoit,.

  Thank you for your response.

  I got it late last night of work. What I did recharge 6 Lightroom, including its serial number. I am at a loss to know why he had abandoned but reloading it worked.

  Thanks again for your suggestions that I kept the file.

  Best regards

  Peter.

• Configuration of the Essbase access via the Web browser user

  Hello world
  
  I have installed and configured the shared services, Admin Server, Essbase, now I need allow two user (User1 and User2) to access
  
  Essbase server via web browser. I request measures that I can achieve my requirement.
  
  If I tried several ways, but always struggeled with good configuration only i always able to connect with a user
  
  (admin).
  
  
  
  Concerning
  Kumar N

  Access EAS is weird (a large part of the functionality of the EAS is weird).

  While there is no request for Regional service to be set to, the username in question must be created in the Shared Services to connect to EA.

  So:
  (1) create the user name in the Shared Services
  (2) if Essbase is outsourced, set the user name on the server and the app/db in question (not strictly necessary from a point of view EAS, but you're here, so why not?)
  (3) launch EAS console, connect to Services of Administration and you are out of the race

  If you do not outsource Essbase security (why? "You want to maintain a username twice?) you need not do the step #2.

  Kind regards

  Cameron Lackpour

• Rule of NAT for vpn access... ?

  Hey, putting in place the vpn ssl via the client Anyconnect on a new ASA 5510, ASA ASDM 6.4.5 8.4.2.

  I am able to 'connect' through the anyconnect client, & I am assigned an ip address from the pool of vpn that I created, but I can't ping or you connect to internal servers.

  I think that I have configured the split tunneling ok following the guide below, I can browse the web nice & quickly while connected to the vpn but just can't find anything whatsoever on the internal network.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080975e83.shtml

  I suspect her stockings for a nat rule, but I am a bit stuck if it should be a rule of nat object network or if it must be dynamic/static & if its between the external interface or external ip & network inside or the VPN (I created the pool on a different subnet), or a 'Beach' (but then I am getting overlapping ip errors when I try to create a rule for a range of IP addresses.

  Any advice appreciated,

  Hi Eunson,

  After have connected you to the ASA that clients receive an IP address, let's say 192.168.10.0/24 pool, the network behind the ASA is 192.168.20.0/24.

  On the SAA, you would need an NAT exemption for 192.168.20.0 to 192.168.10.0

  Create two groups of objects, for pool VPN and your itnernal LAN.

  object-group network object - 192.168.20.0

  object-network 192.168.20.0 255.255.255.0

  object-group network object - 192.168.10.0

  object-network 192.168.10.0 255.255.255.0

  NAT (inside, outside) 1 source static object - 192.168.20.0 object - 192.168.20.0 destination static object - 192.168.10.0 object - 192.168.10.0 non-proxy-arp-search to itinerary

  At the inside = interface behind which is your LOCAL lan

  Outside = the interface on which the Clients connect.

  If you can't still access then you can take the shot on the inside interface,

  create and acl

  access-list allowed test123 ip host x.x.x.x y.y.y.y host

  access-list allowed test123 ip host host x.x.x.x y.y.y.y

  interface test123 captures inside test123 access list

  view Cape test123

  It will show if the packages are extinguished inside the interface and if we see that the answers or not. If we have all the answers, this means that there might be a routing on the internal LAN problem as devices know may not be not to carry the traffic of 192.168.10.0 return to the ASA inside the interface.

  Or maybe it's that there is a firewall drop packets on your internal LAN.

  HTH

• GPO: CD and DVD: deny write access prevents the user to use their USB Pen drive, but other users or ok

  My users have secure readers Pen who throw a CDROM partition with a secure logon application that decrypts the key to mass storage USB the USB on successful logon. The problem I have is that users who install the USB cannot initialize then the app launcher CDROM to enter their password to access the element of the rendering it useless USB mass storage.

  However, any user who has the same type of USB key that plugs in to the endpoint that has already installed the drivers is able to access their own USB or the other users of USB stick (knowledge by providing the password).

  So I've isolated the problem being down to the presence of the GPO setting shown above on the removable storage access policy and by not having not this policy in place when a user installs the USB key, they have no problems, but I can't find a way to clean a user that is already broken, even if I delete the GPO from this user , remove their local profile so that they start as a new user (no roaming or other data) and use a variety of utilities such as USBOblivion to clear the registry and the file system of the USB and installation. When the original user logs back and then installs the USB again, they have the same problem, but no one else does. I have the same problem if I try with another user or administrator as the first user after "clean it up". Everyone can use the pen drive except the user who originally installed when the GPO was in place.

  If I move the user to a new endpoint or rebuild their end point, then they have no problem being the USB setup and then use it because the GPO has been deleted, so what I need to know, that's what he's talking about installing USB and the GPO which is tattooed somewhere in Windows and how can I remove it?

  Hello

  Welcome to the Microsoft community.

  I suggest you post this query on the TechNet forums.

  You can refer a link below to send this request.

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  Let us know if you have a Windows problem, we will be happy to help you.