do not start to vCenter / problem with sso and ad

Hello

My vcenter will not start. in the error logs, I found the following errors...

I changed the server vcenter 5.1 to 5.1 and I insert the vcenter to my Active directroy. I uninstalled sso and installed again the backup file leave 5.1.

After the updates, I used vmware article because I changed the ad domain:

http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2036170

but now it does not start. How can I manually set the uri of the admin? I think it will be the problem:

2012 11-22 T 14: 53:06.575 + 01:00 [04720 info "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI the value:
2012 11-22 T 14: 53:06.575 + 01:00 [04720 info "authvpxdMoSessionManager"] certificates [OSP] [SessionManagerMo::Init] download m root...
2012 11-22 T 14: 53:08.576 + 01:00 [error 01808 "HttpConnectionPool-000001' '] [ConnectComplete] connection failed for < cs p:000000000a1c48c0, TCP::80 >;
CNX: (null), error: class Vmacore::SystemException (konnte keine connection available werden, die Zielcomputer der da verweigerte connection.)
2012 11-22 T 14: 53:08.655 + 01:00 [error 04720 "[OSP] [SsoCertificateManagerImpl]"] [CreateAdminSsoServiceContent] failure when attempting
to connect to the SSO Admin Server: konnte keine connection available werden, die Zielcomputer der da verweigerte connection.  . Retrying in 10 seconds.
2012 11-22 T 14: 53:16.332 + 01:00 [02512 WARNING opID "VpxProfiler" SWI-6f09bdcf =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12030
2012 11-22 T 14: 53:19.073 + 01:00 [02212 info "Default"] detached thread

Greetings,

Markus

It seems that the computer refuses the connection (connection refused so loosely translated from German).

No firewall between the machines?

Maybe try to reorient and re-register vCenter? http://KB.VMware.com/selfservice/documentLinkInt.do?micrositeID=&popup=true&LanguageID=&externalID=2033620

Tags: VMware

Similar Questions

  • Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

    Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

    There are dozens of discussions in this forum that describe the fix

  • I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a

    I'm having a lot of problems with firefox and cannot figure out how to get help. It all started when I updated to 13. I get all kinds of advertising popups, I can't play a game on FaceBook called Farm Town at all, and I get a popup of AVG on the cookies that I can't get rid of. These issues are causing me to use Chrome quite often, although I like Fox better. I've searched and searched how to get help and find nothing. How can I get personalized technical help? These problems will not occur in Chrome at all. Thank you.

    Do a check with some malware malware, analysis of programs on the Windows computer.

    You need to scan with all programs, because each program detects a different malicious program.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

  • Volume shadow copy Service information: could not start the Server COM with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV. [0 x 80110802]

    Problems with VSS and DTC... dunno how or serious errors are

    One of the two messages I get the message this is the right place to post

    Volume shadow copy Service information: could not start the Server COM with CLSID {790f2886-9889-4c99-8ef5-531add05d044} and name SW_PROV. [0 x 80110802]

    Operation:
    Get an interface that can be called by for this provider
    List of interfaces for all providers support this context

    Context:
    Provider ID: {262b716e-bb23-41b5-aaef-e2c15e767167}
    Class ID: {790f2886-9889-4c99-8ef5-531add05d044}
    Snapshot context: 0
    Snapshot context: 0

    Hey artinusa,.

    Welcome to the Microsoft Answers site.

    This error message is seen only in a Windows Server environment.

    The community more suited for this problem would be the Microsoft TechNet community. Please post your query it better support.

    http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

    Have a great day.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Problem with IMovie and Quick time

    Hey everybody,

    I am faced with an unexpected problem with Quicktime and I Movie, and I was wondering if someone had already known that:

    I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

    I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

    Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

    Could someone please help me solve this problem?

    Thank you very much in advance.

    Concerning

    Could someone please help me solve this problem?

    Not only based on what you already said.

    I want to create a film based on shots from my personal camera. I started to work with IMovie to create a sequence of opening and added his musical band. I exported the scenes in Quick Time format without any problem. However, when I merge the exported sequence of I film with shots of my video camera, the soundtrack is completely eliminated.

    How would you"merge" files? (I.e. a "QuickTime" format is any form of data compatible with the platform of supply and the specific structure of QT incorporated into real employment that is stored in a container of MOV file on any of up to 99 tracks possible). Also, what app do you use for reading the file 'merged '? (For example, some media players ignore secondary audio tracks as a result of some methods of 'fusion' of files so it is important to know how the files are "merged," whether or not the audio data are "scattered" several tracks, and/or if the Media Player supports playback of multiple, sequential audio popular.)

    I checked on the Internet and saw that there might be a problem of "Codecs". To avoid this, I exported the sequence IMovie with Codecs of same as one of my video camera files.

    The specific codecs and settings using the specific version of iMovie? (The current Mac OS X operating systems have two X QT and 'classic' Qt integrated structure so it is important to know what structure is used here and how).

    Now, if I compare the files exported from I Movie and those of my video camera, they have identical characteristics. However, the soundtrack will always disappear when I merge them.

    As a general rule, you should review the file "merged" to determine why it does not play back correctly rather than comparing the characteristics of the source being merged files. The main problem here seems to be in your project workflow. That is, you seem to be when you perform an operation in two steps rather than edit several iMove multimedia files and then export the combined results in a video the video and audio tracks have been flattened and exported in standard compression formats with unified settings, features and the.

  • Compatibility problem with Vista and iTunes

    I downloaded iTunes 9 on my Tobisha laptop Satellite last night and put about 2.5 GB of music on it. I didn't upload the music from the internet. I used MP3s, I had for a few years.

    When I went to boot up the laptop this morning the loading process took some time, but it never loaded to the login screen. I just see the bottom of MicroSoft. Is there a compatibility problem with Vista and iTunes? Maybe I put too much music on my laptop?

    Boot in safe mode and delete iTunes and all the music I downloaded would solve the problem? Or it is less simple than that?

    Don't know where to direct this question if any help you could provide would be greatly appreciated.

    Thank you.

    Hello

    iTunes is compatible with Vista and there should not be any problem.
    Yesterday, I installed iTunes 9 on my U400 and everything happened correctly.
    If your laptop can not boot Vista correctly, then you should try the repair feature.

    Turn on the computer and press F8. Now you will see the advanced boot menu.
    Now, you have many choices.

    As a first step, you should try the option called: last good known Configuration (Advanced)

    If this will not help and the Vista will not start then try the option called repair your computer. This option displays a list of system recovery tools, you can use to repair startup problems, run diagnostics, or restore your system.

    If that does not help, then you will need to retrieve the unit using the Toshiba recovery disc or HARD drive recovery.

  • Printing problems with XP and Lexmark-documents are just stuck in the print queue

    Original title: printing problems with XP and Lexmark

    Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

    I guess you do not have all of the error messages.

    It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

    Find the IP address of the printer of his network diagnostic page.
    Click Start > printers and faxes, right-click the printer and select Properties
    Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
    Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

    To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

    Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

  • BlackBerry Z10 Z10, problem with Gmail and BIS

    I just got a new Z10 and had all configured to discover that my primary e-mail service, Gmail, does not work if the only internet access is through the Blackberry Internet Service (BIS).

    When I configured first, I got Wi - Fi active (other than BIS, I don't have a data plan as my main focus is email). As it was my 3 services e-mail (Gmail, Hotmail and my prived ISP service) all the connected without problem. It was only after I turned off WiFi that I discovered that while my other two services work fine, my Gmail account has become "not connected".

    I tried everything I could think of, including delete my Gmail account, do a reboot cold and then try setting up the account to new as well as doing a reset complete, I could start over again. All to nothing does not. Only if the WiFi is on what can I cannect to Gmail and that doesn't help me if I don't have a Wi - Fi service.

    Does anyone have any suggestions as to what I might try?

    BasinGroup wrote:
    Two problems with your comment about BB10 supporting not BIS: 1), a BB subscription service would be nuts not to provide support and 2) my 2 other E-mail accounts work fine with BIS.

    You may be right about Gmail not supporting ActiveSync, but on the device the Z10 was supposed to replace (Torch 9860 running os 7.1.0) no problem with Gmail and BIS, so there must be something unique about BB10 on the Z10.

    BIS is not used on BB10. BB10 access directly servers of e-mail now.

    Have you tried to configure gmail so that the signal from the carrier and not on wifi?

    In Gmail, you enable IMAP access and not use two-factor auth

  • I have a problem with scrolling and typing on the computer.

    Original title: I have problems with scrolling and typinging after a minute or so without the computer trying to go in the background, any help would be great because I will to throw the mouse across the screen very soon

    as noted above, totally tired, I must right click of mouse to wake up on this page, I did it while typing grrrr big time. Help pleeeease

    Hello

    Thanks for posting your question in the Microsoft community.

    I see that you have a hard time to work with the mouse.

    1. What is the brand and model of the mouse?
    2. The problem occurs on any program or when you perform a task in a particular program?

    Try these steps and see if that solves the problem of performance of your mouse.

    Method 1:

    You can check that the mouse buttons are set correct.

    Refer to the section "Change how the mouse buttons works", from following link to learn more about the same:

    Change the settings of the mouse

    http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

    Method 2:

    You can uninstall and reinstall the drivers for the mouse on your computer, to do so follow the steps mentioned below.

    a. click Start, click Control Panel , and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
    b. in the Device Manager, look for the device under the mouse and other pointing devicesand then double-click the device name.
    c. click on the Driver tab, and then click uninstall the driver.

    d. restart the computer and it will automatically re - install the drivers of.

    Note:

    You can also update mouse drivers by visiting the manufacturer's Web site.

    See this link for more information:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Let us know if you need help on this question or any question about Windows.

  • Problems with clicking and scrolling when you are using the mouse in IE

    Separated from this thread.

    Original title:

    Problems with clicking and scrolling when you are using the mouse

    I have the same problem.  My touchscreen responds but my touchpad and mouse are unable to save a click in IE.  I need to reboot to rectify.  It seems to be more common when the laptop comes out of fashion 'sleep'.   I tried all the steps above, everything is up-to-date.

    Hello Fred,.

    Thanks for the reply.

    I appreciate your efforts to resolve the issue.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run the hardware and devices Troubleshooter and check. Please follow these steps:

    a. press Windows + W keys, type Troubleshooting in the search box and press on Enter.
    b. click on 'show all' and then click 'hardware and devices'.
    c. click 'Next' and then follow the on-screen instructions.

    If this does not help, then use method 2.

    Method 2:
    Start your computer in safe mode and check the number.
    Refer to this article:
    Start settings for Windows (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows-8/Windows-startup-settings-including-safe-mode

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Adobe CC does not start (Yes, I'm already connected and in a large number of times)

    As a paid user, I am very disappointed. I know a lot of people with more Adobe CC cracked, and it works perfectly.

    Since I use it for my work, I want to make it, but I'm starting to think that I made the wrong choice.

    Three weeks ago, I had my first problem: CC of Lightroom and Photoshop CC wouldn't start. No problem with the LR 5,7 (with license), but the CC would not start, CC bureau, or various catalogues.

    If I opened the catalog folder, it showed the lock and log files.

    I restarted my CC, but it did not work.

    Then I saw the Forum of Adobe that the solution must be a disconnection and connection of the desktop CC app: I did, and it did not work. I did something like 6 times, and he started subsequently. But I lost a lot of time.

    Today, 17:00, I tried to run LR CC to 14:30 and she has not started. Even with PS CC.

    I have disconnected and reconnected several times. Nothing to do. I restarted my pc, still nothing to see.

    Then I launched the application Office CC and, surprise!, he told me that was my no. APP INSTALLED.

    But in my pc app Manager I got LR CC and CC PS, of course.

    I tried to open them, and they did not work.

    I disconnected and logged in again, nothing to do.

    I tried to uninstall the app from CCdesktop, but he told me to close down LR (how the hell can I close it if I can't open it!), and the same thing happened with the pc app Manager.

    (Sorry, this becomes very long, but imagine how I'm feeling, lose an afternoon of work and still not knowing the problem and still pay for Adobe CC of course), then I rebooted my pc and succcesfully all (CC of LR CC desktop application), CC PS uninstalled.

    As I write this, I'm trying to download LR CC; While hoping eventually will work fine, at least for a few days so I can do my job.

    Anyone had the same experience?
    What should I do if this happens again?
    A very annoyed user of CC,

    Matteo Pezzi

    Hello

    As you have tried many steps at the end of you, I would advice you Contact Customer Care as a troubleshooting technique may be necessary.

    Kind regards

    Sheena

  • curious problem with extrusion and rotation

    I found a curious problem with extrusion and turn into the CS6. It's not a bug, but it's a behavior that is less intuitive who is confused and sometimes painful. I think it is something that should go on the list of tasks for the devs. Someone else, right? Don't agree?

    Example:

    Rotate_issue.jpg

    I started with a path arrow, to which I applied the effect "extrude". I then put an icon on top of the arrow and grouped in the icon and the arrow. Now, I use this icon arrow in several different parts of my design, in different orientations. I flip the arrow, the relative position of the icon and the arrow seems to pass. I believe that this is happening because when you rotate the arrow icon, Illustrator rotates both the icon and the arrow on the center of the underside of the arrow. This is because the upper side of the arrow is essentially fictitious, just an artifact of the effect of extrusion. So, even if the icon appears as if it is drawn on the upper side of the arrow, it behaves as if it is attached to the underside of the arrow. When you apply a transformation, this transformation impacts on the underside of the arrow, causing the top of offset from the icon.

    The solution would be to add an extra box to the effect of extrusion, asking if you wanted to extrusion (the way things are currently done) upwards or downwards. If you can extrude downwards, then the upper side of the arrow would be the 'real' face, those affected by the changes. You can then put a picture on the top, the arrow and the image of the group, and when you apply a transformation, the icon would remain fixed relative to the top, which would be consistent with your intuitive expectations.

    If anyone is curious to experiment with this particular example, I posted this file in Google Docs here:

    https://docs.Google.com/file/d/0B0Hoxcl5zTEtTXo5QnNsMGwwOGc/edit?USP=sharing

    It's about what you just mount the image with a transformative effect to match the extrusion.

    So basically, you apply a 3-d rotation effect to your image to match the rotation of your arrow, then you apply a transformation movement in the vertical axis to match the height of your extrusion.

    hope this helps

    https://docs.Google.com/file/d/0B4ilRoSBagc3d2w2Ylc2cWxFVjA/edit

    If you want to get real on this issue retro we only corresponding to the rotation of the arrow in the center of the extrusion, if we wanted to distort the image perfectly, the rotation should be slightly higher, but anyway, it is hardly noticeable.

  • problem with Safari and the opening of sites

    problem with Safari and the opening of sites

    Please describe the problem in more detail?

    Try to reset the settings of Safari:

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select the Preferences/Privacy tab

    4. click on remove all data from the Web site

    5. close Safari.

    Remove cache Safari files:

    1. click on finder

    2. look for the menu GO to top

    3. click on GO and hold down the option key. This will show a user library folder.

    4. click library and find the Caches folder

    5. in the folder caches com.apple.Safari Ouvrezledossier

    6. move the Cache.db file Trash.

    This should solve the problem. If it does not help, try to disable the Safari extensions

    1. open Safari

    2. click on the Safari menu at the top (to the right of the Apple logo)

    3. Select Preferences

    4. find the Extensions tab

    5 disable all extensions of

    6. relaunch Safari

  • The browser does not start after you have turned off and turned on the computer

    The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

    • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

    Thank you

  • Is anyone able to run Adobe CS5 with El Capitan now? I've read about problems with Illustrator and photoshop, but these seem to be in 2015 Octobe5. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5.

    I've read about problems with Illustrator and photoshop on EL Capitan, but these seem to be in October 2015. She improved at all? I need to upgrade that I am running an old OS v but I need to run CS5. Can not afford to go to CC. I have a Macbook Pro.

    CS5 and 10.11 are not supported and will never be supported by Adobe or Apple.

    However it works for some, more actually, but not all. There are sporadic problems with Illustrator, Photoshop seems to be the best. Do not expect an improvement and keep in mind that anyone from Adobe, Apple or anywhere else will fix it.

    Do a clean install

    Make sure you have the Apple Java

    h ttps://support.Apple.com/kb/DL1572?locale=en_US

    Make sure you have your serial number and if you are having problems with the serial number or the serialization however adobe of web server will not support your problem.

    update the application via photoshop.

Maybe you are looking for