Do sapce to verticalFieldaManager

Similar Questions

• Sent Sapce command of windows taskbar

  Hello

  I want to know if it is possible to send a coammand of the space bar for a different task Windows?

  The reason is: I have a spectrometer software that is expected for the SPACEBAR action start the measurement and I want to use it to synchronize my Labview VI with this spectrometer software.

  Thank you

  Markus

  This is the case. This has been asked several times before. Have you tried a search? Sending keystrokes to other Applications using LabVIEW.

• Satellite 1670CDS - re-installing Windows 98SE

  I have an old laptop 1670CDS (from days girls University) I got to the bottom of the Forum.
  As a favor to a friend - he has a temporary use of a portable simple to some Word / Excel work-, BUT I'm having problems to get things set up on this machine again.

  I managed to acquire an additional memory to hold the original 32 MB up to 160 MB, which was mounted without any problems.

  At the start, but the system does not find any operating system. I have no idea how this could be other than some clean disc in the dark and distant past.
  I can't find the original system recovery disk, could be anywhere between Leeds / Edinburgh and here - you know what look like students.

  I tried to install W98SE from a CD, and this product (but slowly) until it reaches a point that the system displays a message about the "partitions".

  The screen displays a line: * 5727 MB disk 0 at Id 0 on bus 0 on atapi (MBR) *.

  Below, we find what appears to be the first line of a list + States -: partition1 Mo 5726 (unknown) (5726 MB free)
  (This is the only entry in the list box)

  The options are:
  (a) press ENTER to set up Windows XP on the selected item
  (b) press C to create a partition in the sapce unparitioned
  (c) press D to delate this partition

  So far, I have tried
  (a) implemented the system reboots and crashes
  (b) nothing happens
  (c) message is displayed indicating that it is a system partition and it may contain config hardward, programs to start operating
  systems (e.g. Windows XP), or other manufacturer-supplied programs.
  Then I have the ability to DELETE the partition, or return to the previous screen.

  I'm not sufficiently confident to take the risk of delting the partition, without some assurance that I can get things sorted another way.

  I missing something here, and should I go on his way to another? Or am I flogging a dead horse.

  Any help / pointers appreciated.

  Otto

  Hello!

  I think that this problem is caused by a faulty HARD drive.
  Check that the disk with Drive Fitness Test as Akuma said.

  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Download the CD image, burn it to a disk and boot from it. Choose the advanced test.
  On the same site is a guide to the user short if you want to know more about it.

  Good bye

• HP Recovery (D)

  I have a Pavilion P7-1254, with Windows 7.

  When I try to run the backup program it shows incomplete backup due to recovery disk with not enough sapce.

  How to remedy this situation? Can I remove the current file and then perform a new backup or can I increase the size of allocation of space recovery disk?

  Thank you

  Hi flyerrich,

  The recovery HP (D:\) Partition must not be changed.

  Please indicate which program backup that you are using.

  Backups should be created on external drives, network drives, or on a second internal HDD.

  Jaco

• How to install fresh windows 8 or 8.1 on hp pavilion g7 A8 AMD vision

  Hello!

  My 8.1 Windows Update has been getting problem he ask to update windows I refresh now I get small footprint in the C: drive, I want to install fresh windows to get more sapce on C drive but without lossing in my other data disks now how do

  Help me

  Since you're working from a laptop, I suppose that you have only one physical disk. You will need to backup all your data on an external hard drive before reinstalling windows.

  However, if 'windows update' is to install the updates, it will just reinstall these updates with the new facility. If you see a screenshot of the error you received, it would be easier for me to identify what happened and better help.

  Something that you can try before reinstalling windows is running software like CCleaner to clean the temporary files on your system. This will ger RID a lot of irrational data that may accumulate on your computer. It can remove certain parameters, so be sure to check that you delete only things you don't need, as the process permanently deletes the user files.

• Highlight the strange performance - 2013sp1

  Hello

  I just installed 2013SP1 ICB and opened a project I've been working on lately.

  I had the last version 8.5.1.

  The project is well open/built/run.

  But when I set a few breakpoints and debug the code the backtrace highlighted seems strange.

  See different local screenshots attached.

  The editor preferences that can be associated with: tab length = 2 / console style = allman / last 2 of the 3 boxes are active in the region tab of the Editor Preferences dialog box.

  If I open a sample project from examples (Intgraph for example) I observed the same behavior.

  Closing/re-opening the CVI IDE or 'clean' ing ing and 'rebuild' makes no difference.

  Is this a known problem already?

  Hi Eren,

  I read your post more carefully, and I saw that you wrote that the last 2 of the 3 boxes are active in the region tab .

  Indeed, in this case the culmination is always bouguous, even if you reload the file.

  You don't see the bad behavior on the examples because the files are indented with tabs and you do not save files to replace tabs by spaces. If you make a small modification to a file and debug again you will see this behavior because the file is saved with spaces.

  The debugger uses the saved file that contains sapces, while the Publisher is has tabs in there and so the bad nail.

  Unfortunately it is not a work around for this case, the only solution is to uncheck "Convert spaces to tabs when loading files"

  I apologise for the inconvenience.

  Constantin

• How to extend the volume of data in the Windows XP machine?

  Victorinox original title: space Partition:

  My C drive is almost full (110 MB only free) but my G, E, H readers have at least 23 GB of free space in each of them. SO can I do anything to divide the sapce. I know that to do something with the start menu. Can u direct me giving the steps.

  I can leave 16 GB free space in each drive and have drive C with 21 more GB of space.

  Hi AnirudhRamesh,

  You can use diskpart.exe to extend a data volume in Windows XP.
  For more information, see this link:

  How to extend a data volume in Windows Server 2003, Windows XP, in Windows 2000 and in Windows Server 2008

  http://support.Microsoft.com/kb/325590

  Note: Before moving to take backup of any important data before making changes to the system.

  Hope the helps of information.

  Please post back and we do know.

• The touchpad scrolling speed

  original title: Scrolling__

  My screen scrolls quickly when I accidentally touch the mouse pad.  How to disable this feature, or at least slow down?

  My screen scrolls quickly when I accidentally touch the mouse pad.  How to disable this feature, or at least slow down?

  You don't want to say 'mouse '. You mean " touchpad ". Yes?
  If it is the touchpad that you wanted to say, try this...

  Right click on open sapce of desktop > click mouse pointers > here I can't give you the exact step-by-step becuse if you do not have a Dell PC, you do not have the options of the mine has.
  But, in any event find the button that will take you to touchpad settings where you can make adjustments. You can actually turn it off.
  If you do not have a Dell, after return

  t-4-2

• Partition question - what would be the best way to increase its space and take part of the space from another partition

  Hello, I have my 500 GB SATA broken down into 3 partitions. Vista and 2 others. The problem is the process of using Partition Magic, Vista has been given only 30 GB, now its operation with 1-2 GB of free space. I want to know what would be the best way to increase its space and take part of the space from another partition, but I don't want to have to reinstall or do I want to lose all the data like photos, browser, documents and news ect.

  -Thank you

   

  You can read more details on "How to move from one partition to the other sapce without loss of data.

• Taskbar is at the top of the screen instead of low, how do I go back?

  The Start button, time display, volume etc buttons are at the top of my screen and I want to get back at the bottom of the screen.  How to do this please.  I tried to unlock the taskbar and by clicking and dragging, but it won't work.

  * original title - the Start button and the time, the volume bar etc. have emerged at the top of the screen and I want to hide at the bottom of the ecran.*

  Right-click inside a sapce oprn taskbar > if "Lock the taskbar" is checked, uncheck it.
  Left-click inside the taskbar and HOLD > while holding down, drag the slider down to the bottom of the screen > let go now when it is at the bottom > right-click in the tasks bar > click on lock the taskbar.

• Get Windows 7 on a different hard drive

  Hey guys,.

  Well, I had bought origanaly Windows Vista 64 bit HP OEM for my computer. On the road, I downloaded the 64 bit Windows 7 while I was at University. I only got a WD 120 GB drive and I'm now 50 MB of free space :( (Computer is slow way, and I need to have more sapce) so I bought a Segate 500 GB drive at 7200 RPM... in any case, I wanted to know, how can I install 7 on my new drive and use my current as a slave... My main problem is I don't have the disc for Windows 7 b/c it's an upgrade, but I don't have serial number checked. I can't contact Microsoft b/c they want me to pay $ 70 just to talk to one of their people to support... (rediculos, almost the cost of an another OEM). I guess the way I want to do is install the second hard drive and copy everything on it and then boot from the drive and wipe one I use now... possible?

  Thank you!

  First of all, you have to burn the digital download Windows 7 on a blank DVD. I don't know it was distributed as a. ISO file that you burn easily with software such as. ISO Recorder or programs that can burn disk Images:

  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  Once you've burned the. ISO file, what you can do is to shut down your computer, open the system unit, remove the current drive and install the new hard drive. Because the disc of Windows 7 is an upgrade, you will need to use the following instructions to install an upgrade disc:

  http://www.winsupersite.com/Win7/clean_install_upgrade_media.asp

  Once Windows 7 is installed, you can now attach the old drive as a slave drive:

  How do I add an additional hard drive

  Start your computer, and then browse my computer (start > computer). You should see your old disk here. Browse the disc and copy your files. You may need to take possession of certain files and folders.

  Windows 7take ownership & grant permissions to access files & folder
  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Group space Webcenter Portal 11.1.1.8

  Hello

  We had "Group Sapce" in older versions of Webcenter spaces

  http://docs.Oracle.com/CD/E15523_01/WebCenter.1111/e10149/gspace_build.htm#WCSUG1265

  How to implement the same in the last Webcenter Portal 11.1.1.8?

  Thank you

  Sherli

  Now, you can create different portal to another group. As for HR, finance, Marketing.Creating different portal and share content on group basis

• Express request 4.2 and 'New report' button.

  Hello

  I tried on Oracle 10g XE Express application. I've updated the installation of the APEX on the version 10g to 4.2 and I have no invalid object in the database and no errors whatsoever in the creation of applications etc. Everything seems good and I started to use the Web map Applications however, despite a ' new report ' drop down on the tutorials here, interaction with the database From has Websheet Application I see not on any websheets I create despite allowing SQL/PLSQL according to the tutorial. " So, I thought that it must be a thing of 10g. I downloaded the "Oracle Developer VM' and put it in my installation of VirtualBox. It has a database of 12 c and comes with the latest version of the APEX. I have exactly the same thing. I signed up to the APEX on the portal of the line which gives some free sapce you and allows you to test the version 5 of APEX and it's there. You can see "new declaration".

  I can't create reports on two other facilities at the APEX. The option will not help only. The button is not there. Help!

  AFTER MUCH TORTURE AND CLICKING AROUND, I FOUND THAT IN THE USER ADMIN TAB INSTANCE ACCOUNT TO MANAGE, THERE IS A MENU "FEATURE SETUP". UNDER THE CONFIGURATION MENU OF THE FEATURE, THERE IS A DROP-DOWN LIST CALLED LIST "SELECT SQL AND PL/SQL IN WEBSHEETS" ""-SURPRISED NOBODY COULD ME SAY THAT.

• How to find the history of Tablespace in Oracle database?

  Hello

  I need to find which data was inserted on the weekly basis in the particular tablespace.

  Because we need to find which tables update very frequently, and also we didn't have plenty of space in the server.

  If we can find it, it would be useful for us to communicate with the developers.

  Thank you

  Shiv.

  For tablespace growth

  ==================

  Select

  TO_CHAR (sp.begin_interval_time,'dd-mm-yyyy "") days.

  TS.tsname,

  Max (round ((tsu.tablespace_size* dt.block_size) /(1024*1024), 2)) cur_size_mb,.

  Max (round ((tsu.tablespace_usedsize* dt.block_size) /(1024*1024), 2)) usedsize_mb

  Of

  dba_hist_tbspc_space_usage tsu,

  dba_hist_tablespace_stat ts,

  dba_hist_snapshot sp,

  dba_tablespaces dt

  where

  Tsu.tablespace_id = ts.ts #.

  and

  Tsu.snap_id = sp.snap_id

  and

  TS.tsname = dt.tablespace_name

  and

  TS.tsname not in ('SYSAUX', 'SYSTEM')

  Group

  TO_CHAR (sp.begin_interval_time,'dd-mm-yyyy ""), ts.tsname

  order of ts.tsname, days;

  To check the tablespace free sapce

  ================

  Select nom_tablespace, sum (bytes) /(1024*1024*1024) from dba_free_space where nom_tablespace = group 'LARGE_DATA' order by 2 desc nom_tablespace

  To check the size of tables

  =================

  Select sum (bytes) in dba_segments where nom_segment = "XYZ";

  Thank you

  Harman

• OSB - how to preserve start and end spaces in Xquery

  I am using Xquery to fill with spaces "to meet a standard of length.

  Example: If set criteria of length = 7, data = 'abcd' result 'abcd '.

  While working with Eclipse, Xquery - Test shows results with sapces but when I test Xquery in SbConsole, is to show that a single space.

  And while publishing to the target database the $body variable removes this one space too.

  I tried using XML: Space = "preserve" for the top node, but it does not work.

  I use 11.1.1.5 eclipse and 11.1.1.5 OSB.

  Please help me solve this problem.

  A resolved. Issues with the browser rather than xml.

  ProxyService
  
       {fn:concat("","Hello")}
       {data (fn:concat("","Hello"))}
  

  SbConsoleTest: Showing only one workspace
  
       Hello
       Hello
  

  HTML page: View Source
  XML: Space="preserve"> Hello< /Test1>
  <Test2> Hello< /Test2>