Documentation on the DCA review?

Similar Questions

• Documentation during the review of the VCIX?

  Hello community,

  Documentation of the NSX is available during the review of the VCIX (as the vcap-dca)?

  
  

  Benja
  

  Hi Vincent,.

  Yes, just like the VCAP exams, you have full access to the NSX-6 documentation center.

• I'm looking for documentation on the Firefox command line arguments.

  I'm looking for documentation on the Firefox command line arguments. I use Ubuntu.

  http://KB.mozillazine.org/Command_line_arguments

  This doesn't seem to be what you're looking for?

• Function documentation for the SignalExpress project

  I use the function 'project documentation' LabView SignalExpress 2009 in my application project.

  The draft measure a pressure signal permanently in different situations. I want to present my project document is a list of locations of the siganl of pressure taken under different situation, with a plot for each situation so that readers can easily compare the plots.

  For example, I want the document states:

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  At 10:00 at low flow:

  ground pressure siganl

  At 11:00 with increased flow

  the same pressure signal ground

  etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  What I did was flirting with the pressure signal in my documentation of the data acquisition phase in the project tree, but in doing so, I could only show the last parcel of this signal in my documentation, the plot is in real time, just like what shows in the display of the data.

  Is there a way to show the same siganl taken at different times in a documentation?

  Thank you!

  Hello

  You can totally do this by using a feature called "instant."

  Rather than drag the step signal directly in your project document, first create a snapshot of your data using the menu option "use > create snapshot...". (Ctrl + Shift + T) »

  A dialogue will appear asking you what signals you want to instant. After selecting / them and clicked on Ok, your new snapshots will appear in the section overview of the application (in the left corner below, by default).

  Drag these signals on your project document. When you are ready to create your next snapshots after changing the configuration, you can select "Operate > repeat the last Snapshot (Ctrl + T) ' to simplify your process.

  For more information about the snapshot, see using LabVIEW SignalExpress found under "Help > LabVIEW SignalExpress Help" and search on the keyword "snapshots."

  

  I hope this helps!

  Phil

• Documentation of the API for CWIMAQControls

  I am a software developer with several years of experience in medicine and other sciences, but now is working on a software project using National Instruments IMAQ customer in .NET and have no prior experience with image processing.  The only I can find the API documentation is a help file with the product intalled.  Then this under did a good job explaining the service inputs and outputs, it is light on the explanation in a real retail functions actually do.  Under .NET (not my favorite but this is what I got), I can get a good summary of the objects and their properties / methods, which is useful.  I see there are a lot of good material in this forum, but what I need right now is good basic documentation.  I also noted a plethora of PDF files in the directory of installation but found nothing there or on ni.com which gives me the level detail fo I need.  When I think that the documentation of the API, I expect something as complete what Sun Microsystems offers with any JDK Java - it seems that the doc API IMAQ assumes a certain level of ease and does not for someone like me come with literally no background outside a lot of math (algebra of vector fortunately!) and science in College courses.

  Am I missing something?  I see that there are many examples of programs and I can get what want from those, I guess, but I do not charge my client for all the time it will take, if there is a more ready fo source information.

  Now, I realize that the field of the treatment of the image is large and it would be difficult to develop a software of this nature without a learning curve.  So I have

  I studied through two web queries image processing and having bought the book 'Digital Image Processing (Gonzalez, wood).

  Specifically, I was put to zero in on what is needed for the task at hand: "blob detection" and "blob tracking movement."  It seems pretty clear to me, some have become familiar with the image processing basic terminology and methodologies that have been developed for tracking, and image recognition of movement IMAQ software can do what it takes.  At this point, I can do basic things with objects presented in .NET.  It is analogous to maybe ask a kid who just the definition of an equilateral triangle to solve differential equations.

  In this case, what I really need is one or more examples of programs that perform functions similar to what I want to do.  Is there any suggestions in this regard?  My research on ni.com revealed evidence of the items of "blob detection" and "blob motion" and I see that these were used for tasks as complex as the particles of follow-up and the counting of blood components.  I don't see and od you expect not to see any object, follow also specific methods than what I need to do - which is in fact quite abstract - and chart the path of the blob more to light to the camera image gained when it moves in real time.

  It's a strange feeling to have been programming for decades, and then enter a field where the customer needs require me to act as a nini who has not done its homework.  But it's the nature of the job.  The pointers will be appreciated.  If I missed something obvious I don't even mind being reprimanded to be unobservant or lazy.

  Thank you very much in advance for any assistance that may be provided.

  tsfarrell-

  Have you looked at the manual of the Vision Concept?  (it should be in the form of PDF in the documentation directory, or you can see it here) It has a more detailed description on what our algorithms.

  We also ship many examples for .NET - those of the 2. Functions\Binary analysis file dealing with blob detection and may be useful.

  Good luck to you on your application!

  Greg Stoll

  Vision R & D

  National Instruments

• Is there a documentation about the configuration of the function keys (program)

  Is there a documentation about the configuration of the function keys (program).

  Dell Dimension 1400, model XP SK8110 keyboard.   Yes, I know there are 7 years old, but running like a champ.

  Hello

  You can use various function keys to activate certain features and commands only. The following list details the current functions keys, what they do, and when you can use them.

  Three keys can be used when Setup is loading and when you are prompted to press the F6 function key to install some third-party small computer system interface () SCSI and host controller drivers:

  • F5 - for computer type or hardware abstraction layer (HAL) selection
  • F6 - to install the SCSI controller drivers and third-party host
  • F7 - to run Setup without Advanced Configuration and Power Interface (ACPI)

  When the "Welcome" screen is displayed, the following function keys can be used:

  • F2 - to automatically start the process (ASR, Automated System Recovery).
  • F10 - to bypass the menu screens and to load the Recovery Console

  During the GUI (GUI) - Mode Setup, the following function keys can be used:

  • SHIFT + F10 - to enable access to a prompt during the installation in graphical Mode
  • SHIFT + F11 - to display "old" wizards that give more detail.

  Thus, it is not possible to configure the function keys to perform this task. However, you can use your favorite search engine to perform this task.

  Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  HP Photosmart 3110 referred to the documentation for the printer. Error 0xe18a001

  Hello caromuna,

  It seems that other users have found a way to completely reset the printer back to the default settings, which can help with this question.

  The reset is discussed in this forum thread and seems to be a bit difficult to fill. Let me know if it helps to solve your problem.

  Photosmart 3310 ink system failure

• How long does it take to get the app review?

  Hello BB Team.

  How long does it take to get the app review about? I sent this last February 28 with 2 majors bugs ExitToLive app.

  Thank you.

  Kind regards.

  9 days is not too bad at the moment. I got a few apps take a lot longer then than an update.

• I'm looking for the practical review of Photoshop CS5 files.

  I'm looking for the practical review of Photoshop CS5 files.  I downloaded the screenshots, but I need the files.

  I need to 2 - 3.psd, 3_2mask, SleepingPug, Parking, 4.1.psd etc.

  Hi Angelas,

  You can download the PSD files: free, PSD + 5.500 free Photoshop files

  Kind regards

  Tanuj

• Documentation of the table in the PROD?

  Hi all

  11.2.0.1

  AIX6

  What is a good practice that the PROD database has tables fiield description documentation?

  e.g. EMP:

  Field name Description

  ==========                             ================

  EMPID employee ID

  Name of employment ENAME

  What views of $ V select to see if these fields have values? or is updated?

  Thank you very much

  pK

  Oracle allows you to add the documentation in the form of comments.  In my humble OPINION, most developers do not use this feature.  However, they ARE supposed to document the Tables and columns in their technique / pattern / design documents.

  Here's how Oracle allows this:

  HEMANT_SQL > create table my_emp_table (key primary emp_id number, varchar2 (50) first_name, last_name varchar2 (50), hire_date date);

  Table created.

  HEMANT_SQL > comment on table my_emp_table is "Custom employees Table"

  Created comment.

  HEMANT_SQL > comment on column my_emp_table.emp_id is ' primary key column. ID of the employee;

  Created comment.

  HEMANT_SQL > comment on column my_emp_table.hire_date is 'hiring Date;

  Created comment.

  HEMANT_SQL >

  HEMANT_SQL > select table_name, user_tab_comments comments
  2 where table_name = 'MY_EMP_TABLE ';

  TABLE-NAME
  ------------------------------
  COMMENTS
  ------------------------------------------------------------------------------------------

  MY_EMP_TABLE
  Table custom Employees

  1 selected line.

  HEMANT_SQL >

  HEMANT_SQL > select table_name, column_name, comments
  2 of user_col_comments
  3 where table_name = 'MY_EMP_TABLE ';

  TABLE_NAME COLUMN_NAME
  ------------------------------ ------------------------------
  COMMENTS
  --------------------------------------------------------------------

  EMP_ID MY_EMP_TABLE
  Primary key column; Employee ID

  NAME MY_EMP_TABLE

  MY_EMP_TABLE LAST_NAME

  MY_EMP_TABLE HIRE_DATE
  Hire date

  4 selected lines.

  HEMANT_SQL >

  Hemant K Collette

• Where is the Documentation of the API for the Premiere Pro Panel SDK?

  I see the links to the sample application and the getting started guide, but where is the actual SDK documentation?

  Where is the documentation that describes the options for manifest.xml?

  Where is documentation of AGENCY javascript API for the type of functions used in the sample application (ie: "$. _ext_PPRO.importFiles ()" "")

  What about documentation for this global "__adobe_cep__" object I see in CSInterface.js in the example?

  Thank you

  There is no documentation for the ExtendScript API organization; the example code work is the right place to start. Feel free to ask questions.

  For the rest: Adobe-CEP/CEP-Resources · GitHub

• Documentation of the detailed process of transactions?

  Hello

  I work currently on a project based on "Oracle . NoSQL" as head hierarchical storage I'm just curious, how ONDB handles their transactions." I have scoured the attached documentation unsuccessfully. The only thing I could find were all titles or phrases of marketing (as 'Flexible ACID transactions, a Berkley DB')

  NoSQL Oracle database transactions

  NoSQL of Oracle database (Version: 12cR1.2.1.57 Enterprise Edition, 2014-01-10 06:21:46 UTC)

  Oracle Berkeley DB Java Edition | Oracle Berkeley DB

  http://Indico.CERN.ch/GetFile.py/access?resId=0 & materialId = slides & heats = 159716

  In the documentation of Berkley DB J’ai found a section arguing that BDB handles their transactions through JTA. From ONDB is based on Berkley DB Idid assume that transactions will be processed the same way. Please correct me if I'm wrong.
  However, it is not the result I'd do it love to hear. are there any detailed documentation for the transaction treatment?

  
  

  If anyone of you have an idea or a tip where I could find such a thing?

  
  

  greeting

  Sascha
  

  I think that the best thing that can be for you to read the source code (available in CE version).

  In src/oracle/kv/impl/api/RequestHandlerImpl.java's executeInternal, you will see him call beginTransaction and commit().

  Then, in src/oracle/kv/impl/api/ops/Execute.java's execute() you'll see how it sorts by key operators and then executes each of them.

  IHTH.

  Charles

• Documentation for the automation plugins

  Hello

  I'm new with Oracle OSM 7.2.2 and trying to find documentation for the feature that is available in automation_plugins.jar

  I see that there are many classes available that can be used in XQuery Automators, for example:

  declare namespace context = "java:com.mslv.oms.automation.TaskContext";
  declare variable $context external;
  context:completeTaskOnExit($context, "success")
  

  There is nothing in Oracle Communications order and Service Management Documentation that describes what classes are available in automation_plugins.jar and how they can be used. Is there a javadoc or other documentation somewhere?

  Thanks in advance

  Hello

  Yes, there are java documentation available. It will come with SDK during installation of the OSM.

  Check your default folder: C:\Program Files\OSM\SDK\osm7.2.2.1.x.x-javadocs.zip.

  Hope this helps you.

  Concerning

  Srinivas

• need for documentation of the following components... ?

  Hi all
  
  Where can I find the documentation for the following components... ? Not in the API... ?
  
  
  / ATG/commerce/Order/Purchase/CartModifierFormHandler
  / ATG/commerce/Order/ShoppingCartModifier
  / ATG/commerce/Order/Purchase/RepriceOrderDroplet
  / ATG/commerce/Order/Purchase/ShippingGroupFormHandler
  / ATG/commerce/Order/Purchase/ShippingGroupDroplet
  
  etc...
  
  I can't find them in the guides of CommerceStoreGuide or PageDevelopmentGuide or all programs... Happy if you can provide information on them...
  
  
  Thanks in advance,
  Laurie Bovilla

  CartModifierFormHandler http://docs.oracle.com/cd/E26180_01/Platform.94/ATGCommProgGuide/html/s1003understandingthecartmodifierform01.html
  ShippingGroupDroplet http://docs.oracle.com/cd/E24152_01/Platform.10-1/ATGCommStoreGuide/html/s1660shippinggroupdroplet01.html
  RepriceOrderDroplet http://docs.oracle.com/cd/E24152_01/Platform.10-1/ATGCommStoreGuide/html/s1655repriceorder01.html
  ShippingGroupFormHandler http://docs.oracle.com/cd/E23095_01/Platform.93/apidoc/atg/commerce/order/purchase/ShippingGroupFormHandler.html

  It will be useful.
  -RMishra

• Documentation on the resources and monitoring

  I put a new VMware ESXi server implemented.

  Where can find technical documentation on the ESXi way (but I assume that ESX so...) manages resources (memory, CPU, disk,...) and how can I monitor and control the use of resources?

  My goal is to get the best of ESXi and virtual machines supported to promote virtualization...

  Greetings and wishes

  Marius

  http://www.VMworld.com/community/sessions/2009

  Take a look in the virtualization management section.

  There are loads in there.  for example:

  VM2711

  Optimizing VI performance: from the datacenter to the desktop

  VM3566

  Best practices for managing and monitoring storage in vSphere

  Dan