does not accept administrator passwork

Similar Questions

• Adobe does not accept my system for a facility administrator password, what to do?

  Adobe does not accept my system for a facility administrator password, what to do?  This password has been used for years and never failed.  Something in the communication to Adobe for installation (bridge CC) failed, but they offer no further action suggested.  Thank you all.

  Friends, thank you for the offers of help - when I returned to the page to download after many hours, he took my password and I finished downloading.

• Windows Vista does not accept my password (unchanged) but I have no recovery disk - Windows is already installed

  Hello

  As the title says after using my laptop without any previous problems, suddenly I can not connect on Windows Vista.

  I'm 100% sure that the password has not been changed, caps lock, shift, caps lock Num etc is not active.

  When I bought the laptop, Vista was already installed, so I don't have a recovery disk.

  Any help would be appreciated.

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  This is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Malware can also cause problems with passwords:

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If the above does not fix it:

  Here are the different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Windows does not accept my password

  For the last 3 days, windows does not accept my password.

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  This is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  Malware can also cause problems with passwords:

  Download, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• computer Vista laptop does not accept password

  I have been using my HP vista laptop and today, it does not accept my password. I tried safe mode and tried to change password. NO RESULTS...

  Help, please...

  James

  Dunedin FL

  Hello

  It is available on you microsoft information help on problems with passwords

  http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  ________________________________________________________

  except that we cannot help you

  read this microsoft's policy NOT to provide assistance to crack passwords when they are lost or forgotten:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/a5839e41-b80e-48c9-9d46-414bc8a8d9d4

• Vista does not accept the password (password not changed or forgotten)

  Vista does not accept the password (we have not forgotten password of windows startup) how can we get around this problem .the password has not been changed or forgotten Vista has a little programming problem which stops the right password

  It is most often caused by the computer being infected, so after you go back into the system, it would be wise to make an analysis.

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  You can change your password to something you remember (or use a white) another administrative user account. If you had only an administrative user account, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent as muTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).
  MS - MVP - Elephant Boy computers - don't panic!

• Trying to update Win 7 HP for Windows 7 Pro - at any time to update does not accept my product key

  Bought two Win & Home Premium & W7 Pro to Sam W7HP is OEM, W7Pro upgrade (a cardboard hanger). Have installed W7HP and works well. Update at any time does not accept my Key Prd. Key to sting has 25 characters + -01 at the end. I can enter 25 characters (with auto-add dashes) but when I try to enter the - 01 it won't take. Present the key without the - 01 returns a valid product key error. Tried 3 times and checked my typing with each. Would appreciate any help.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Password Manager does not accept my password to win

  Hi, I reinstalled my system Win XP (reinstalled - restore factory restore point) and using the same password for my account in XP I used before. But password manager does not accept my password more.

  When I connect to my profile, and asked me my password in the pass Manager it sayes the authentificaiton failed. It's different when I type a password for the wrogn win... It is said immediately that he didn't, but when I type the correct password to my login to Win that he continues to deal with for a while, but then he said that he could not.

  When I login as an administrator and try it... everything is OK. but in my profile is not...

  following... when I close it cancel goes away - but when I try to double click PM icon - and I wonder password... and I type my login password right it is not that he failed, but only he disappeare and noething happened... When I try to open the MP of the plateau - the same...

  in some cases, it is said that windows password has been changed and wonder the new pass - but it's always the same, I used before so I'm sure that I don't forget and I write you the wrogn-car - I woudn't power connect victory also...

  I tried to change my password to win and by using the copy - paste I old tape pass, new, still nine and also in the PasswordManager but still does not...

  I tried to uninstall and reinstall the password manager, but he seems to have a few status registers...

  Can someone help me solve this problem? I really enjoy using this password manager...

  I found here that "password issues" aren't disccussed here... If not... where are? doI have to call somewhere and still a lot of money on the phone bill? I'd like to solve this problem online here or by mail...

  Hi Steve,

  Please excuse my late reply, but I am currently very busy and not at home.

  Yes, 'shutdown' meant turn off .

  The need to restore the keys seems to me as if all of the key information have been removed. Maybe there is some key information that remains after the uninstall process, and these are retrieved later during the new installation. During my process any key information have been recovered so far here.

  Are you sure, be connected as "LENOVO - BC8C81F0\Administrator. The name of the computer looks as if it was a random name. If your computer now has a different name. Maybe you have to change the name of the computer.

  I also feel that CSS is not very accurate in finding the right user and user profile folder.

  Sorry, if uninstalling and cleaning of different locations does not help you. If the problem is related to different account of your administrator account ID, I can't help you. It is a problem well beyond my capabilities of Windows.

  Good luck!

• Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How can I manage my versions to download?

  Photoshop 4 and 7 upgrade, now Windows 10 does not accept PS 4. How can I manage my versions to download?

  The download, it's what you do to get a file from a Web site to your computer... Installation is what you do to have the installation files to put a program on your computer and the link to your operating system... what you do... Download or install?

  If you mean that Win10 will not allow you to INSTALL the program, read below

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  -IF not, Details of the message from the error messages and a person may be able to help

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions... said FULL yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Elements of Photoshop 7 new download does not accept my serial number for 2009. Can anyone help?

  Elements of Photoshop 7 new download does not accept my serial number for 2009. Can anyone help?

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Are you using a computer administrator account will be full read/write permissions?

  I don't know if what you have is included in the link below, but take a look

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• Error: 0: the database does not accept a connection

  Hello

  We have EMP 11.1.2.1 and EAS worked very well. We applied successfully patches of SAE 13904635 and 13904640.

  However, after you apply the patch, we received the error

  Error: 0: the database does not accept a connection

  For example, when connect us to EAS and click the EssbaseCluster1 under "Essbase Server" node we don't get something, like the list of application as such. We just get the error log.

  What could be the problem, is there anything, we had to do after you apply the hotfix?

  The essbase server seems to be running so we can pull the reports in the workspace and all.

  Thanks for all the answers.

  Have a read of the following Oracle Support doc - "impossible to add or connect to an Essbase server in Essbase Administration Services (EAS):" error: 0 in Essbase Administration Services: the database does not accept a connection "or" "error: 105: Login with token at MaxlJni" "(Doc ID 1469492.1).

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Update does not accept my password if the site only

  I can connect on the Web site very much and I can edit my account etc information but the creative cloud app will not let me update Indesign. It does not accept my password. I tried to change the password that doesn't work. Help! (please)

  Nodessa operating system that you are using?   The password you are be prompted for is likely for an administrator account on the computer.  It's the same connection you use to connect to your computer.

• ColdFusion Launcher does not accept the password when you try to change the web server

  I know this will sound stupid as wrong password is a password wrong, right? Well I swear I know my passwords and it's not having it.

  I am running coldfusion 9 and I want to change the default internal server that I put it to the top with the installation on apache server that ships with mac OS x. So I started the coldfusion launcher and clicked the button Web server connection utility to set up, he asks a password to continue, but usually accept it... I tried both of the passwords that I use for stuff course where I was confused which it requested one, but is not having either.

  I tried to change the password for the coldfusion administrator and still no joy. I know that sounds stupid, but I do not understand... How can I get if she does not accept my admin password... I have tried uninstall and try again once like stuff as it is a nightmare to get rid of my experience... always leaves a file somewhere that you can never seem to isolate who mucks upward following installation so I left it for the moment. Anyone got any ideas?

  OK, you cannot double-click the wsconfig file, cause, then you are not running it as sudo, so you will not be allowed.  'sudo' is 'Super user' and allows you to run a program, temporarily, as a super user.  If you do that you won't have permission to edit the httpd config file.

  Try the following.

  Launch the Terminal

  type: cd/Applications/ColdFusion9/runtime/lib (change the correct path if it is not the path to your ColdFusion)

  Press enter

  type: sudo java-jar wsconfig.jar

  Press enter

  It should ask you for your password. Enter it and press ENTER again.

  It should launch the configuration tool, this time with the appropriate permissions to modify the file httd.conf.

  Good luck

• IPhone does not accept the code to check for text messages

  II phone does not accept the code verification for the transfer of messages text imac

  Maybe these articles will help:

  Get a verification code and connect with authentication to two factors - Apple Support

  If you don't receive your check or reset email - Apple Support

  If this is not the case, can you explain a little more detail what exactly is your problem?  Or see the 'Contact us' at the bottom of the second article.

• How to force Thunderbird to accept a certificate? or admit a new certification authority where it does not accept authority as being valid?

  I get the following message when I check the signature of the shippers:

  This certificate cannot be verified and is not imported. The issuer of the certificate may be unknown or untrusted, the certificate may have expired or been revoked, or the certificate should not have been approved. »

  Then, after conversion of the .crt to a tent and .cer file to import in the list of the authorities - I get the following message: "is not a certificate authority certificate, so it cannot be imported into the list of certificate authority."
  I converted it by saving it to alternative formats, but it does not accept the authority of certification.
  I don't understand why Thunderbird won't let me accept the risk.
  Can I do this without getting the server of the sender address and port?
  Thank you!

  Ok. Roger all. Will try to get another certificate of the sender. Thank you very much!