Problem when launching an application in the Simulator with Eclipse

Similar Questions

• Display problems when you run applications JavaFX 2.0 with multiple monitors

  I noticed a number of issues when running JavaFX 2.X applications on a system with multiple monitors. My setup consists of 2 monitors (primary and secondary on a dual graphics card) and my third on a separate graphics card.
  
  The questions I have observed are,
  
  (1) the application is not too sensitive when running on the second or third monitor.
  
  (2) when the application runs on 2 monitors and re-tire it will only redraw correctly on one of the monitors. The application will be displayed as a black box on the another moniter
  
  (3) where the application does not run on the primary monitor and a ChoiceBox is selected choice appears as expected but it blackens the application in the background.
  
  Someone else encountered similar problems? I'm going to raise a JIRA with screenshots and details of my system if other people are able to confirm that they are also suffering from similar problems.

  Hi, I had similar problems. My application uses 2 monitors and now everything works just perfect. It turned out that the interface is causing these disorders. I changed mine, then he worked (actually more the new installed I also had to update the driver for the new interface)

• Configuration of the Simulator with Eclipse

  HI -.

  I use version JDE 4.5 with the Eclipse editor. When I run the Simulator, Simulator of 8300

  turn on and I see my app.

  How to set up so that another Simulator is launched? I tried to look at some options, but

  It was not clear. I didn't see any documentation on this, but I could have missed the right one.

  If anyone has seen elsewhere, please point me in the right direction.

  There are .bat simulators subdirectory files. Their launch shows the right Simulator, so I need

  find out how Eclipse knows which Simulator to launch.

  Thank you

  Amod

  To view the documentation on that, click on the Help menu of Eclipse and choose summary help.  Then expand 'BlackBerry JDE plug-in for Eclipse Guide', expand 'Configuring the BlackBerry Smartphone Simulator' and then click 'Specify a BlackBerry Smartphone Simulator for a specific type of BlackBerry smartphone'.

• Photo not valid error when launching an application

  Hello

  When launching an application through the web browser, I get this weird error.

  Starts the RDP session, the profile starts to connect, and as username and group political stuff ends, I get a little popup with the title 'Quest vWorkspace Shell' and "invalid image" message.  At the bottom of the screen is a pnshell.cmd minimized command prompt that is sitting there until I click OK in the popup mentioned previously.  Once I click OK, then the vWorkspace application will launch successfully.

  The pnshell.cmd has the following inside:

  REM added by RMC to prevent permissions app sprinkled with admins

  c:\Windows\syswow64\Ifmember administrators

  If not ErrorLevel 1 Goto SkipAdmins

  c:\Windows\SysWOW64\pnshell.exe

  I'm on vWorkspace v8.0

  The RDSH is 2008 R2

  Any ideas why I get this error?

  Thank you!

  Nick.

  Hello Terry,

  Thanks for the reply.  We use Sophos, but I added the file C:\Windows\SysWOW64\pnshell.exe to the list anyway, restarted the TS, and it's always as problem.  I also added pnstart.exe to the list too.

  I noticed now that this happens only to a specific user.  Other users seem to be the problem... So... don't know why, but I hope it's a?  If you have any ideas why I would be eager to hear.

  Thank you

  Nick.

• Impossible to deploy my application on the Simulator more

  Since there are 4 days, I can't deploy and run my application on the Simulator more, I get this message all the time:

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 482774
  Info: Installing eir.bb10.CorporateContacts.testDev_ateContacts1e5ecb89...
  Info: Treatment 482774 bytes

  What could be the problem? I later use NDK, reinstalled all, using 3 different simulators, including the most recent, but without success.

  I'd appreciate any help. It is very annoying, because I can't do any work and ship expected app updates, I face the environment of dev for 4 days! I have worked on many platforms and with many different tools, but I've never experienced anything like this.

  Thanks for the reply!

  I managed to get things running in a similar way. I uninstalled everything, including the NDK and start over. I returned to VMWare Player v.4. I work mainly with outdated Simulator, we run the fastest for me, although later runs now too.

  Yet EACH deployment on a Simulator takes several attempts, I don't remember when was the last time that the deployed application and runs correctly on the first attempt. I also change the download settings, switching between 'install bar' and 'clean install', these two works more often for me. Another thing to try in the meantime is to go for debugging directly, if the race does not...

  It is a terrible experience and it's very laborious, as I end up losing most of my time trying to run my application on the Simulator, instead of productive coding. Sorry BlackBerry, but it's worse that develop for Android, iOS, Windows Phone, Java ME... I develop for these systems and has never had any topic also with any of them.

  One of the reasons for the app started working again maybe do something with the code, because it contained errors, but the construction still successfully passed and they never showed me any error message in the IDE or in the Simulator. Anyway, I'll never know if my code had something to do with the cause of the problem, because the 'hack' held an older VM etc. But I write this so that people know that it can theoretically hinder deployment too.

• Cannot find my application on the Simulator

  Hello

  use eclipse ide for the development of the BB application.when I run my application on the Simulator, I can't find my application in the downloads (simulators) .plz help me

  Krishna,

  Have you created a debug or run your application configuration?

  Follow a previous post of mine:

  http://supportforums.BlackBerry.com/T5/Java-development/how-can-I-add-applications-to-my-BlackBerry-...

• I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and all is well again

  I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and everything is well again, however if I then opened my pictures, and then open a file... some files, less than a second after they are open [and the pictures show] will make the window My Documents to disappear also all the desktop icons disappear the computer will then will reset it self , add all the icons and waiting for me to do something.

  I have no idea where to start looking for this problem.
  I do not have a disk operating system is
  When I try to save an attachment, as in email, Explorer opens, I choose a location to save it, then immediately Expolrer closed! I can't save an attachment

  Hello Philipwk,

  Thank you for your message.  Please provide comments to a few questions so that we can better help you get your problem solved.
  1. are there recent changes made to your system, namely the hardware or the software?
  2 How long present this problem?
  Here are two methods to try, please try in order.  If a system restore fix the problem, do not perform step 2.
  Step 1:
  Run a system restore to before that was the problem.  Please click the link below to get instructions from system restore.
  http://www.Microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx
  Step 2:
  Create and test the new user profile.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Double-click 'Users and groups' > below, select "users".
  In the pane, right click on the space empty and select 'new user '.
  Enter the identification information you will retain and select OK
  Right-click the user account that you just created, and then select "Properties".
  Select the tab "member of" > click on "add".
  Type Administrators in the field and select "check name".
  Once administrators is added, click OK
  Disconnect and connect again your new account, opening pictures with your new trial account.  You can even browse your other photo folder by going to the following location:
  c:\Documents and Settings\ (user account) \My Documents\My images
  If it works, your profile has been altered somehow.  You can then start to copy your data from your old profile to it.
  Please let us know if it did or did not work for you.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

• Start up problem when having multiple databases on the machine

  Start up problem when having multiple databases on the machine:
  
  I installed two databases.
  
  When I stop the database and try to start using
  
  Startup pfile ='... location... " ;
  
  I get ora-12514: TNS: listener is not currently know of service rquirest in connect descriptor
  
  When I try again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn't exist
  
  Stop and start gave no problems when I had a database. Why I get problems when I have two databases?
  
  I use: show the pfile parameter. SPFile; to make sure that I have the right parameter locations, the error should not be the location.
  
  I never installed two databases on a single machine, then perhaps that I make mistake of a first - timer.
  
  Anyone know how to get this working, i.e. start and stop DB without problems?
  
  The oracle 11 GR 2 on Windows 7 64 bit, everything works normally.
  
  Thank you
  Ayman
  
  Published by: aymanzone on June 15, 2011 09:27

  aymanzone wrote:
  My oracle_sid is set to the name of one of my databases

  echo % oracle_sid %

  shows me the name of my first database.

  Still does not.

  When I start the services of two databases by using Services, I can connect and run queries both the database.

  Published by: aymanzone on June 15, 2011 11:47

  First of all... the Oracle Service for the instance must be started for the DB that you try to connect or start.
  Next... from the command prompt:

  Set oracle_sid =

  sqlplus sys as sysdba

  Startup pfile = 'location of the pfile respective db.

  Now, if you want to start or connect to another DB, which is on the same server (again assuming that the Service is STARTED)...
  From the same command prompt or other session...

  Set oracle_sid =

  sqlplus sys as sysdba

  Startup pfile = 'location of the pfile respective db.

  Published by: Srikanth on June 16, 2011 12:27 AM

• My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  My forum ID is connected to my Apple ID email, but when I log in to the forum with my Apple ID email, I get an error and can not reach the forum. How do I merge my accounts so my Apple sign-in ID is working again?

  Apple ID cannot be merged. We'll see if we can get to the bottom of your connection error...

  Tell us step by step, in detail what your actions.

  Tell us a story

  -with a beginning, middle and end. We need to figure out what you know and that you have lived.

  If this problem is new, tell us what immediately preceded its appearance - add software, upgrade or update? New equipment?

  Quoted by of Apple  'how to write a good question.

  To help other members in answering your question, give as much detail as possible.

  • Include your name (peripheral) product and specifications such as the speed of the processor, memory and storage capacity. Please do not include your serial number, IMEI, MEID or any other personal information.
  • Provide the version of your operating system and the relevant applications numbers, e.g. "OS X 10.4.11" or "Safari 4.1.3.
  • Describe the problem and include all the Details on what seems to make it.
  • The list of troubleshooting steps you have already tried, or temporary corrections that you discovered.

  For a detailed 'coaching', please see usage tips , help us help you on these forums and wrote an effective communities of Apple Support question

  "Keep it short and Simple"-take your time... but be thorough - CCC

• by using the Simulator on Eclipse

  I have been using eclipse for the coding and packaging, this is a nice tool.  -for debugging, I used the Blackberry JDE. Currently running the Simulator in the BB JDE is not complicated but when multiple API versions has to be tested as well as having a production version and a version of development running the number of workspaces increases. I therefore decided to take a go at the Simulator in Eclipse. After an hour I had it almost working but finally ends and "Device error - Blackberry Smartphone Simulator", "the catastrophic Assertion failure". If the BB JDE Simulator is "screwdriver", the eclipse is a double "Swiss Army Knife". So many settings and not a lot of explanation (that I found). Is there a 'manual' on the use of the Simulator on Eclipse somewhere?

  For example. In the BB JDE, I put a flag on a module is a module system, and must be loaded initially. Not found in Eclipse. There are a lot of other parameters. I want just a basic configuration which works like the BB JDE. The main application is a Midlet and my modules are still running listeners

  It is a mistake of the BlackBerry smartphone itself Simulator (Windows application), not simulated applications.

  Please, try the following:

  1. Click the Project menu in Eclipse.
  2. Choose BlackBerry-> own Simulator...
  3. Select all, and then click OK.

  This will reset all the BlackBerry smartphone simulators to their default state.  Now repackage and run your application again.

• Performance problem when inserting in an indexed table space with JDBC

  We have a table named 'feature' that has a "sdo_geometry" column, and we created the spatial index on this column,
  
  CREATE TABLE (ID, desc varchar, sdo_gemotry oshape) feature
  
  CREATE INDEX feature_sp_idx ON feature (oshape) INDEXTYPE IS MDSYS. SPATIAL_INDEX;
  
  Then we executed following SQL to insert some 800 records in this table (we tried this using the DB Viewer and)
  our Java application, both of them were using JDBC driver to connect to the database oracle 11 g 2).
  
  insert into feature (id, desc, oshape) values (1001, xxx, xxxxx);
  insert into a values (id, desc, oshape) feature (1002, xxx, xxxxx);
  ...........................
  insert into a values (id, desc, oshape) feature (1800, xxx, xxxxx);
  
  
  We met the same problem as this topic
  Performance of the insert with spatial index
  It takes almost 1 dry for inserting a record, compared with 50 records inserted per second without spatial index.
  which is 50 x slow performance when you perform the insertion with the spatial index.
  
  However, when we copy and paste these scripts inserted in Oracle Client(same test and same table with spatial index), we got a completely different performance results:
  more than 50 records inserted in 1 seconds, as fast as the insertion without having to build the spatial index.
  
  Is it because that the Oracle Client not using JDBC? Perhaps JDBC has been something bad when updating of these tables indexed on the space.
  
  Edited by: 860605 09/19/2011 18:57
  
  Edited by: 860605 09/19/2011 18:58
  
  Published by: 860605 on 19/09/2011 19:00

  JDBC normally use autocommit. So each insert can leads to a commit.
  I know not all customer Oracle. In sqlplus, insert is just an insert,
  and you run "commit" to commit your changes explicitly.
  So maybe that's the reason.

• computer not automatically standby (formerly titled "impossible computer automatically sleep when it is connected to the internet with modem cable")

  Hi, I noticed recently that my computer (Windows XP Media Center Edition 2005) is unable to sleep automatically when it is connected to the internet with a cable modem. Change the settings for my current power mode and try a different feeding regime (diagrams of Windows XP default power and power management, I created) only solves the problem for 2 days at most. I also tried to change the settings for the other power plans mentioned, and yet once again, the problem was only set for two days at the most. I also tried turning off my computer, restarting my computer, recording Powercfg /Restore Default policies in Run, saving sfc/scannow in Run, and again, I got the same result. Reset and power cycling the modem cable is not helped either. To help you better understand the problem, for example, if I had the date set for the screensaver set to 1 minute, the time for the monitor to turn off set to 2 minutes and time for your computer set to 3 minutes, the screen saver activate after 1 minute, the monitor turns off after 2 minutes, but the computer would not sleep mode after 3 minutes , even after an hour or more. I tried to check the Task Manager, and I have not noticed any process that would be interrupting the day before. However, I noticed that when I turned on the monitor by moving the mouse, even when the computer was unable to sleep and unplugged the ethernet cable from the cable modem and waited, the computer has entered standby as it should have.  I tried to find a solution for more than a week, contributions for this issue would be greatly appreciated. Thank you for taking the time to read my post. (Update: it seems that the problem is something else then my cable modem.)

  Hello

  Thank you for the update.

  This behavior can occur because of possible conflicts of third-party software, which includes the third-party security software.

  You can also temporarily disable third-party security software and firewalls installed on the system and check the issue.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: be sure to enable the security software on the computer after checking the issue.

  Note: When you perform a clean boot, you can activate services for the modem, network card and disable third-party services to check the issue.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?

  Can you use Pocket wizards to trigger the HVLF60M Sony flash when it is out of the unit with the A7R?  How about studio flashes (Alien Bees)? I just sold my Canon gear and moved to Sony, but I need advice on how to trigger wireless flashes.  Thanks for any help you can provide.

  Larry

  LarryMarshall, Any Trigger of manual Radio should work.  Assistants of pocket or RadioPoppers.

  But there are a few problems with the 60 m.

  (1) it doesn't have a PC or a 1/8 port to connect directly to a Rec Radio of any brand.

  (2) you WILL NEED to buy or use a hot shoe with a PORT adapter... 1/8 according to the sync cable or PC you may already own.

  (3) you WILL NEED to 'Check' to 'ensure' that trigger the 60 m SHAFT is aligned with the center of contact your hotshoe adapter hot with a PORT... because some adapters won't online upward with the 60 m Flash... who fooled you into believing that it does not work.  When, in fact, it's just the PIN which is not aligning with ALL the hot shoe adapters.

  It will work... you just have to be careful... and know of the gatcha.

  The 60 m PUT claw is not fully compatible with all... hot shoe adapters and there that to do with how PUT 60 m flash foot aligns the trigger ROD.

  I triggered the 60 m in flash with RadioPoppers... in the manual... so, I know it works.

  It is, manual release of the waste of the 60 m flash TTL/HSS abilitys.    What is needed is for SONY to develop and deliver a Radio trigger Solution.  Which would be TTL/HSS and you allow to 'Control' the Flash too... from the camera.

  It is the power of a Flash of modern Radio System.

  Manual triggers are old school.

  p.s. the A7r/A7 can easily trigger flashes of Studio with Pocket Wizzards or RadioPoppers... or probably triggers of manual.    Just be careful if the brand you choose is reliable.

  Pocket wizzards and RadioPoppers were the choice of PRO for years.  Because they are reliable.

• In total, I connect app... When I try to open the camera with quick time just, it is there and goes to white screen

  In total, I connect app... When I try to open the camera with quick time just, it is there and goes to white screen

  Hello

  You can check the link, download the manual to link Total perform operations.
  http://www.centralillinoissecurity.com/resources/documents/TC1.PDF
  You can also check out the Apple support link and view the query.
  http://www.Apple.com/support/QuickTime/