Does not clear the PDM buffer

Similar Questions

• Does not clear the print queue of the printer

  I use Peachtree Accounting to generate cheques to pay for my clients and my Versacheck print the checks on blank check stock. From the windows of the last update of the queue of the Versacheck printer does not clear after that the checks are printed. Therefore, I can't print checks for another company without having to restart my PC to delete the printer. This becomes a huge problem and I was not able to get any assistance on site. I'd appreciate any help.

  Q: did you just install IE9?
  A: no I have not.

  Unless you can answer the question from my colleague TaurArian, you will find appropriate in this forum-online http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware support

• Structure of the event does not clear the queue after his release from the Subvi

  OK I'm not sure if this is a stupid question or not...

  I was trying just a few tips and stumbeled on this problem...

  So I created a sample (not exactly)

  In qqq_Main.vi just press PressMe

  (it opens a Subvi qqq.vi)

  There are two buttons to stop "Alt1" and "pylone2".

  To close the Sub - VI press either on "pylone2".

  or press "Alt1", then "pylone2".

  with the latter method of the value of closing change pylone2 is registered outside the while loop and after the closure of the Subvi should not it be erased? (Or should manually clear us it?)

  For this reason not clear, the second time I press 'PressMe' change the value of pylone2 even goes off before you press anything

  I can't look at your code at the moment, but according to your description, it seems that the system works as expected. I guess you do a completely static record of events (open the event configuration dialog box and select the controls and event).

  The first thing to clarify is your use of the term "registered". In this case, it's a problem, because the registration in the context of the protests means asking to receive the event when it happens.

  Now that you know it's important to understand where the recording is happening, because that's what determines which events are stored in the queue. When you use this type of static record, registration happens from the VI the event structure is in run mode (Note: this does not mean that the VI is actually running, but just that it's the of running or reserved for the race) and the cancellation of registration only happens when the VI mode of execution. Who is right for which you get the events in the queue of the previous run of the VI - the VI is still in run mode, then the event is added to the queue and still waiting in the queue until the structure of the event to run again.

  You can work around something like that by switching to dynamic registration of events, where you can unsubscribe to empty the queue at the end of the VI, but requires more code. Also, in 2013 LV there are a few features added to events that could allow to do this statically (I don't study all the additions, so I don't know if this is possible for static recording).

  There is a good presentation on the events of NIWeek 2013 by Jack Dunaway. You can find details of how to download the video here - http://lavag.org/topic/16091-ni-week-2012-videos/

• Volume D: is dirty. Check Disk Local Disk d does not solve the problem

  Whenever I start my computer under WindowsXP SP3, chkdsk runs indicating that the D: Volume is dirty.  He noted no other problems.  I tried to run check disk Local Disk d with two checked options, but it does not solve the probem.  What should I try next?

  That is right.

  First of all, let us look at the ideas of the Microsoft support engineer:

  I would never not follow the suggestion of Microsoft Engineer in method 1.  This idea makes no sense.

  The Microsoft Support Engineer method 2 does not work for you (or most people), unless you have a XP installation CD bootable authentic with the same Service Pack as your installation.  In your case, you would need a true bootable XP with SP3 installation CD and most of the people do not have such an animal.  It is therefore extremely unlikely that will help you at all - and if your file system is damaged or dirty, I of course never suggests that in the first place until your file system is straightened.

  Volumes that contain file system errors is known as "Sales". When a volume is dirty, he has known file system errors, and you must run chkdsk on the volume to repair the problem.

  When XP starts, it automatically checks the on each volume's dirty bit (C, D, E, etc.), and if any volume is dirty, XP will automatically run chkdsk/p on next reboot on the volumes in an attempt to clear the dirty bit.  Which does not clear the bit of impurity or it may take several passes.

  If the volume dirty bit, one is set, this indicates that the file system may be in an inconsistent state. The dirty bit can be set because the volume is online and has some remarkable changes, because changes have been made to the volume and the computer shutdown until the changes have been committed to disk, or because corruption has been detected on the volume. If the dirty bit is set when the computer restarts, chkdsk runs to verify the consistency of the volume.

  Whenever you start a computer that is running one of the Windows XP operating system or the Windows Server 2003 family, autochk.exe is called by the kernel for all volumes to check if the volume dirty bit is set. If the dirty bit is set, autochk performs an immediate chkdsk /f on that volume. Chkdsk /f verifies file system integrity and attempts to fix any problems with the volume.

  A simple power interruption is something that could result in a disc was marked as dirty.  Have you had a power failure these days?

  You can query the dirty bit on a volume from the command prompt window.  Here's how:

  Click Start, run and enter in the box:

  cmd

  Click OK to open the command prompt window.

  For example, to query the bit of impurity on drive D, type:

  fsutil dirty query D:

  The sample output:
  Volume D: is dirty
  Volume D: is not dirty

  Type "exit" to close the command prompt window.

  You can not enter any command to clear the dirty bit - only chkdsk /r or chkdsk/p can clear the dirty bit.

  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you decide to schedule the chkdsk with error correction during the next reboot, the results appear in the viewing Application event log.  You should look there for the chkdsk log to see what happened and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Date: 04/08/2010
  Time: 11:25:57
  Description:
  Checking file system on C:

  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.

  Windows will now check the disk.

  Cleaning of minor inconsistencies on the drive.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  39070048 KB total disk space.
  28017948 KB in 100571 files.
  56540 Ko 10556 index.
  0 KB in bad sectors.
  236440 KB in use by the system.
  65536 KB occupied by the log file.
  10759120 KB available on disk.

  4 096 bytes in each allocation unit.
  9767512 total allocation on the drive units.
  2689780 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  The dirty bit fade not until chkdsk /r (or chkdsk/p) tracks clean when the system reboots (as in the example) or when you run chkdsk /r from the XP Recovery Console.

  Many times, the best remedy is to just run chkdsk /r from the XP Recovery Console so you can actually see what it does.  Sometimes, this also seems to be the only way to clear the dirty bit and this way you can see what he does.

  Note that you can not also question the bit of impurity of the Recovery Console and you can't turn off the bit of impurity to enter any command.

  If for some reason chkdsk will not erase the dirty, you can simply say XP never check the volume dirty bit, but who will not fix your fault of potentially hard drive, or it could be the drive just need to have chkdsk run on that (sometimes you need to run it more than once) or you will have to think about replacing the drive.

  If you have a genuine XP bootable installation CD, you can boot into XP from that (even a SP2) Recovery Console CD will work and run chkdsk /r manually from there and repeat until chkdsk /r is clean.

  If you have a genuine XP bootable installation CD, say so and I'll post instructions so you can make a CD of XP Recovery Console and how to run chkdsk from there.   There is no required XP media.

  I wonder why it is that I have never see an engineer Microsoft Support post instructions on how to make a bootable CD of XP (no XP media required) Recovery Console... probably because there is no KB article for them to post.

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• Time Machine (on Mac) does not detect the airport Time Capsule

  Originally posted on the page of the airport, but seems to be the better question for this group. Sorry for the double post

  Looking for advice on how to get the Time Machine utility for access to my Time Capsule. I use an iMac in late 2012 with MAC OS 10.12 TimeCapsule is 2015 7.7.7 running latest firmware. Airport utility is the latest firmware 6.3.7.

  When I run the application Time Machine, Time Capsule is not detected. I tried the two WiFi and with cables connected Ethernet (not tried USB yet) and my Time Capsule doesn't have a lightning bolt or firewire ports.

  Open Airport utility & see the airport time capsule. I can see all connected devices, including the MAC, but no prompt activation Time Machine on the Time Capsule.

  I recently used TM on this iMac with a G-Technology drive. It auto detects the time machine and executes a back up. But airport Time Capsule will not.

  Any suggestions?

  Sierra has been problematic with the TC.

  1. make sure you don't have any charge virus protection software. In fact, I would say that disable all software 3rd part at the moment.

  2. make sure that you can actually write to disk of TC.

  Attach the TC disc in the finder and copy a file on disk, you can delete it later... It's just to ensure that you have full write permission. If it does not for the most part, you won't be able to use Time Machine... If you can then try TM immediately...

  Just to be clear, the TC is a network device. You have tested with ethernet and wireless... Ok.. They are only suitable methods. You cannot use USB. And clearly, TC has never had nor will never be ports Firewire or lightning.

  3. no chance that a reset complete TC. This will not delete the files on the hard drive, but you must make sure that the device is configured on the current computer.

  4. There are many positions in these days... read through them and do some research. Sierra is a bleeding edge new... So wait you to spend a lot of the precious liquid if you choose to be an early adopt.

• By clicking on the address bar or search bar and typing does not erase the previous text inside

  When I click on the address bar or search bar and start typing a new entry, it does not erase the previous text. I always have to remove it first to clear the field and then I can type in the new URL or keyword...

  OK, I found the search the on: configuration database. The problem is that browser.urlbar.clickSelects.All is set to "false". I changed it to "true" and now everything is perfect...

  Also to solve the same problem with the search bar, I changed browser.search.context.loadInBackground from false to true.

• from the opening, does not show the current date, need to manually refresh the page

  initially the opening firefox, it does not reflect the current date. I have to refresh the screen to go to the current date.

  This has happened

  Each time Firefox opened

  is past week or two, cause unknown

  A possible workaround is to use to remove the navigation, search and download history on Firefox to clear the cache of the browser on the output. That will make Firefox load pages from the server instead of using the version in the cache.

• Equium A60: Does not burn the DVD?

  Hi all

  Ive had my phone for almost a year now and for some reason any dvd drive does not burn the DVD, it burns cd perfectly but when it comes to bruning DVD it says that nothing is in the drive...

  Ive tried Philips DVD + RW and DVD + R Sony but still no luck, I know that for some DVDs, you must first delete it, but the drive is not even delete them... On the drive, his engraver of DVD multi and the rewritable clearly marked... so am confused at why his does not work... Ive also tried to use Nero to burn DVDs but no luck

  Any help appreciated thanks

  Ammunition

  Hello

  What s on DVD-R and DVD - RW?
  I also suggest trying different brands of DVD.
  Generally, you will find a list of DVDs and CDs, tested and compatible media in the user manual. Check it out.

• Keychain does not display the password or secure since 10.11.2 notes updated

  Keychain does not display passwords or secured since 10.11.2 notes updated. I enter the password and move out them.

  Attempted to create a new keychain, then re-import the old etc. Turned on and off in icloud. Keychain firstaid is absent from the update so no luck there. Any thoughts?

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory.

  Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory. What is that?... and how can I solve this problem?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.

  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have visited
  logged on with a temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP 15-D103TX computer laptop problem: Windows does not detect the dedicated graphics card

  Hi all

  I recently bought a laptop HP 15 - D103TX , which is held responsible for Free on BACK. I have updated my Windows 8 operating system and have installed all the drivers from the HP website. The laptop has dedicated 2 GB Nvidia Geforce 820 M graphics card.

  But when I checked, I found that Windows displays the graphic memory dedicated only 0 MB.

  

  As you can see in the screenshot, it shows as 0MB dedicated graphics memory.

  Anyone can clear me, upward on this subject? Is it a driver problem, or what is Windows 8 going crazy.

  Thank you very much in advance!

  Kind regards

  Brahmnoor

  Okay, I found the solution. In fact, the Haswell Intel i5 processor that my 15 HP D103TX has also comes with an Intel 4600 GPU intregated. So when I do normal tasks, the GPU intregated works, so Windows does not display the NVIDIA GPU 820M, but when I play a game or doing intense graphics work, he switches to the NVIDIA one.

  In fact, it makes sense, because it preserves the battery of the laptop.

  Credit: found this solution on the NVIDIA support forums.

  https://forums.GeForce.com/default/topic/664986/GeForce-700-600-series/dedicated-memory-not-shown-/

• My HP PSC 1210 Al lin One xi does not print the small print on a soup Plantation coupon

  My HP PSC 1210 xi all in one printer does not print the small print on a soup Plantation coupon. I was able to print very clearly a letter that I had written and recorded in the notebook. Printing in Notepad is quite small, but it is still much more that the small print in the coupon which wouldn't not print... I printed these coupons several times before without a problem. Also, the small print very clearly appeared on-screen.

  Ron Nimmo

  Hello

  1. do you get an error message? If Yes, what is the exact full error message?

  2. are you trying to print online or that you have the coupons saved on your computer?

  3 If printing online, what web browser do you use?

  4. is the specific question about the site?

  Follow the article:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If still the problem continues contact HP support for help.

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&LC=en&DLC=en&product=90767

  Hope the above information is helpful.

• Physical channel selected does not support the type of output required by virtual channel

  I use a box USB-6251.  Inside of MAX, I can set the device to Dev1 / ao1 sine wave generation and if he have output a sine wave.  When I use DAQmx DAQmxCreateAOFuncGenChan function I get error: selected physical channel does not support the type of output required by virtual channel.  The pilot DAQmx does FuncGen on the box USB-6251 or MAX out a set of tensions?

  Hi Paul,.

  Welcome to the Forums EITHER!  The DAQmxCreateAOFuncGenChan is supported only on products Elvis II.  For other devices, including the 6251, you must use the ordinary DAQmxCreateAOVoltageChan and create your own data buffer.  I would recommend looking in the following example:

  Start > all programs > National Instruments > NOR-DAQ > textual Code > ANSI C examples...

  Analog on > generate voltage > Cont Gen Volt Wfm - Int Clk

  In MAX the Sinewave output is used as a test signal - in this case MAX is a period of the wave sine values to write to the buffer and generate these data.  Again, you can produce a sine wave (or any other function) using the AOVoltageChan, but the AOFunctionGenChan is used only with Elvis II.  Just generate data points for the sine wave that will produce DAQ hardware.

  -John

• Insert a new CD does not change the last torn CD

  WMP 11 XP SP3 does not change the info of CD in the RIP, a new CD of screening.   WMP 11 found no new updates when updates has been requested.  If I close WMP 11 and reopen WMP11 new info of the CD are correct.  It must be a problem of buffer information.

  If you start XP in clean boot mode, the same problem occurs there?

  In addition, please check if the problem occurs on other users accounts, by creating a new user account in the Control Panel, by logging into that account and trying it.

  Tim Baets
  http://www.BM-productions.TK