Does not clear the print queue of the printer

Similar Questions

• Structure of the event does not clear the queue after his release from the Subvi

  OK I'm not sure if this is a stupid question or not...

  I was trying just a few tips and stumbeled on this problem...

  So I created a sample (not exactly)

  In qqq_Main.vi just press PressMe

  (it opens a Subvi qqq.vi)

  There are two buttons to stop "Alt1" and "pylone2".

  To close the Sub - VI press either on "pylone2".

  or press "Alt1", then "pylone2".

  with the latter method of the value of closing change pylone2 is registered outside the while loop and after the closure of the Subvi should not it be erased? (Or should manually clear us it?)

  For this reason not clear, the second time I press 'PressMe' change the value of pylone2 even goes off before you press anything

  I can't look at your code at the moment, but according to your description, it seems that the system works as expected. I guess you do a completely static record of events (open the event configuration dialog box and select the controls and event).

  The first thing to clarify is your use of the term "registered". In this case, it's a problem, because the registration in the context of the protests means asking to receive the event when it happens.

  Now that you know it's important to understand where the recording is happening, because that's what determines which events are stored in the queue. When you use this type of static record, registration happens from the VI the event structure is in run mode (Note: this does not mean that the VI is actually running, but just that it's the of running or reserved for the race) and the cancellation of registration only happens when the VI mode of execution. Who is right for which you get the events in the queue of the previous run of the VI - the VI is still in run mode, then the event is added to the queue and still waiting in the queue until the structure of the event to run again.

  You can work around something like that by switching to dynamic registration of events, where you can unsubscribe to empty the queue at the end of the VI, but requires more code. Also, in 2013 LV there are a few features added to events that could allow to do this statically (I don't study all the additions, so I don't know if this is possible for static recording).

  There is a good presentation on the events of NIWeek 2013 by Jack Dunaway. You can find details of how to download the video here - http://lavag.org/topic/16091-ni-week-2012-videos/

• Does not clear the PDM buffer

  I use TDMS written and PDM rinse functions in a state machine application. I write to TDMS in two States and rinse after every write.

  Worth that I will have is that hunting TDMS takes the time to write data on the disk, but does not seem to fade from the buffer, such as duplicate data following emptying. Interestingly, this happens only for a single State.

  The first State, which has no problem, writes 30 items in each of the 16 channels, writes an element for each channel during each iteration of a loop and a I have FLUSH after I exit the loop.

  The status of the second loop is more critical time, so writing TDMS is that after the exit of the loop, and I store the data between the two in a shift register to write. I have create a new name and group every time I write to PDM data is duplicated in each new group corresponding to the State second, but not the first State. The second State writes a variable number of items in each of the 7 channels, but an equal number of each channel.

  States managed in a 1, 2, 1, 2, 1, model 2, so I'm confused why it is rinsed and the other is not.

  Any ideas? Thank you!

  rjmartinator wrote:

  I use TDMS written and PDM rinse functions in a state machine application. I write to TDMS in two States and rinse after every write.

  Worth that I will have is that hunting TDMS takes the time to write data on the disk, but does not seem to fade from the buffer, such as duplicate data following emptying. Interestingly, this happens only for a single State.

  The first State, which has no problem, writes 30 items in each of the 16 channels, writes an element for each channel during each iteration of a loop and a I have FLUSH after I exit the loop.

  The status of the second loop is more critical time, so writing TDMS is that after the exit of the loop, and I store the data between the two in a shift register to write. I have create a new name and group every time I write to PDM data is duplicated in each new group corresponding to the State second, but not the first State. The second State writes a variable number of items in each of the 7 channels, but an equal number of each channel.

  States managed in a 1, 2, 1, 2, 1, model 2, so I'm confused why it is rinsed and the other is not.

  Any ideas? Thank you!

  I guess the shift register that you use makes these messes are you compensation/Overwriting the shift registers. Anyway if you can put the code it would be then is to find the problem.

• Volume D: is dirty. Check Disk Local Disk d does not solve the problem

  Whenever I start my computer under WindowsXP SP3, chkdsk runs indicating that the D: Volume is dirty.  He noted no other problems.  I tried to run check disk Local Disk d with two checked options, but it does not solve the probem.  What should I try next?

  That is right.

  First of all, let us look at the ideas of the Microsoft support engineer:

  I would never not follow the suggestion of Microsoft Engineer in method 1.  This idea makes no sense.

  The Microsoft Support Engineer method 2 does not work for you (or most people), unless you have a XP installation CD bootable authentic with the same Service Pack as your installation.  In your case, you would need a true bootable XP with SP3 installation CD and most of the people do not have such an animal.  It is therefore extremely unlikely that will help you at all - and if your file system is damaged or dirty, I of course never suggests that in the first place until your file system is straightened.

  Volumes that contain file system errors is known as "Sales". When a volume is dirty, he has known file system errors, and you must run chkdsk on the volume to repair the problem.

  When XP starts, it automatically checks the on each volume's dirty bit (C, D, E, etc.), and if any volume is dirty, XP will automatically run chkdsk/p on next reboot on the volumes in an attempt to clear the dirty bit.  Which does not clear the bit of impurity or it may take several passes.

  If the volume dirty bit, one is set, this indicates that the file system may be in an inconsistent state. The dirty bit can be set because the volume is online and has some remarkable changes, because changes have been made to the volume and the computer shutdown until the changes have been committed to disk, or because corruption has been detected on the volume. If the dirty bit is set when the computer restarts, chkdsk runs to verify the consistency of the volume.

  Whenever you start a computer that is running one of the Windows XP operating system or the Windows Server 2003 family, autochk.exe is called by the kernel for all volumes to check if the volume dirty bit is set. If the dirty bit is set, autochk performs an immediate chkdsk /f on that volume. Chkdsk /f verifies file system integrity and attempts to fix any problems with the volume.

  A simple power interruption is something that could result in a disc was marked as dirty.  Have you had a power failure these days?

  You can query the dirty bit on a volume from the command prompt window.  Here's how:

  Click Start, run and enter in the box:

  cmd

  Click OK to open the command prompt window.

  For example, to query the bit of impurity on drive D, type:

  fsutil dirty query D:

  The sample output:
  Volume D: is dirty
  Volume D: is not dirty

  Type "exit" to close the command prompt window.

  You can not enter any command to clear the dirty bit - only chkdsk /r or chkdsk/p can clear the dirty bit.

  When chkdsk runs automatically restart either because XP thinks he needs to (perhaps your NTFS volume has been marked as dirty) or you decide to schedule the chkdsk with error correction during the next reboot, the results appear in the viewing Application event log.  You should look there for the chkdsk log to see what happened and no problems after running chkdsk.

  To view the logs in Event Viewer, click Start, settings, Control Panel, administrative tools, event viewer.

  A shortcut to the event viewer is to click on start, run and enter in the box:

  %SystemRoot%\system32\eventvwr.msc

  Click OK to launch the event viewer.

  Search the Application log for an event originally by Winlogon, something like:

  Event type: Information
  Event source: Winlogon
  Event category: no
  Event ID: 1001
  Date: 04/08/2010
  Time: 11:25:57
  Description:
  Checking file system on C:

  The type of the file system is NTFS.

  One of your disks needs to be checked for consistency. You
  may cancel the disk check, but it is strongly recommended
  that you continue.

  Windows will now check the disk.

  Cleaning of minor inconsistencies on the drive.
  CHKDSK checks Usn Journal...
  Audit of the USN Journal is complete.

  39070048 KB total disk space.
  28017948 KB in 100571 files.
  56540 Ko 10556 index.
  0 KB in bad sectors.
  236440 KB in use by the system.
  65536 KB occupied by the log file.
  10759120 KB available on disk.

  4 096 bytes in each allocation unit.
  9767512 total allocation on the drive units.
  2689780 allocation units available on disk.

  Windows has finished checking your disk.
  Please wait while your computer restarts.

  The dirty bit fade not until chkdsk /r (or chkdsk/p) tracks clean when the system reboots (as in the example) or when you run chkdsk /r from the XP Recovery Console.

  Many times, the best remedy is to just run chkdsk /r from the XP Recovery Console so you can actually see what it does.  Sometimes, this also seems to be the only way to clear the dirty bit and this way you can see what he does.

  Note that you can not also question the bit of impurity of the Recovery Console and you can't turn off the bit of impurity to enter any command.

  If for some reason chkdsk will not erase the dirty, you can simply say XP never check the volume dirty bit, but who will not fix your fault of potentially hard drive, or it could be the drive just need to have chkdsk run on that (sometimes you need to run it more than once) or you will have to think about replacing the drive.

  If you have a genuine XP bootable installation CD, you can boot into XP from that (even a SP2) Recovery Console CD will work and run chkdsk /r manually from there and repeat until chkdsk /r is clean.

  If you have a genuine XP bootable installation CD, say so and I'll post instructions so you can make a CD of XP Recovery Console and how to run chkdsk from there.   There is no required XP media.

  I wonder why it is that I have never see an engineer Microsoft Support post instructions on how to make a bootable CD of XP (no XP media required) Recovery Console... probably because there is no KB article for them to post.

• HP Envy 27: Printer does not finish the print job

  Computer is HP Envy 27. Have a for printer HP Officejet Pro 8600 wireless connection. Have old ACER desktop also wireless to the same printer. Print jobs larger than 3 pages, the old ACER works very well, but envy does not. The printer stops after only 3 or 4 or 5 printed pages. Sometimes I hear a small beep in the printer when the printer stops printing. Also the desire does not eliminate the queue when the print job is finished. Entered in the configuration advanced on the computer for printing options and checked to see if that option (not playoff jobs in queue) has been verified. It was not the case. So I don't know why it is keeping the job in the queue. When we first got the urge last year, he had the printing problem, although she probably had the problem of the queue.

  Hello autumnperson1,

  Please download and run the HP print and Scan Doctor www.hp.com/go/tools

• HP officejet 6600 my laptop does not recognize the printer

  My laptop does not recognize the printer any longer. It will recognize the fax on the printer but not the printer itself. Can you help me? I have two currencies on my laptop. HP officejet 6600 and hp officejet 6600 network. Even printing for both. One network is the fax. I'm not clear what is the question. I can't even download drivers or updates for it.

  There are two 6600's in the list, a fax and a printer, because the full feature software and drivers have drivers for both. If you do not use the fax, you can remove devices and printers.

  A work print from other sources? For example Notepad?

• HP M4555, mailbox 3 bins stapling (CE736A) - does not sort the paper during printing of z/os.

  Hello

  Shortly:

  Printing from z/os on HP MFP with stapling Mailobx joint - does not sort the paper. All the paper goes to an output tray, instead of outputb different locations, depending on the configuration of the printer settings.

  With more details:

  1 device (HP LaserJet Enterprise M4555fskm MFP printers):

  2 mailbox HP stapling 3 bins of 900 sheets (CE736A)

  http://WWW8.HP.com/h20195/v2/GetPDF.aspx/4AA3-2888EEE.PDF

  Our Organization has Mainframe, where the documents are printed (ESF printing system, language PCL).

  We have 3 print queues in Windows print - P1, P2, P3 server. All 3 have the common TCP port - at the end, there is multifunction print device: HP M4555, where we tied - sorter of stapling to the 3 bins 900 leaves HP (CE736A) and configured in this way:

  1 P1 queue prints to: upper left bin.

  2 P2 queue prints to: average left bin.

  2 P3 queue prints to: lower left bin.

  When I print the test page from windows server to P1, P2 and P3 - ir printed paper properly in appropriate output tray. But my problem is that these print jobs, coming from the Mainframe to these queues - are not sorted by bin (P1 to P2 - in the Middle, P3, Upper - Lower) - the paper goes to a location, for example - Upper (or if not configured device in Control Panel mode mailbox - Lower).

  I have fought with this problem too long and cannot be resolved.

  Driver, that is used:

  HP LaserJet M4555 MFP PCL 6.

  P2/properties/Device Settings:

  Accessory output bin: HP 3 stapler/stacker - Mailbox Mode:

  

  Output:

  

  I already tried to change the settings to:

  1 Windows print queue server settings;

  2. from the device settings (side of built-in web server);

  3. the side HP jet admin web.

  Nothing happens. For me it is too difficult, which is priority 1, 2. or 3. option, see above?

  Location:

  

  Impatience on your part.

  Andrejs Sobolevs

  Service Desk COMPUTER team

  This problem has been resolved the side Mainframe, VPS printing system. Administrator has made the installation program there. There is no need to do it on the side of the unit.

  Solved.

• the preview window does not show the document that I'm about to print in Sierra

  The preview window does not display the document that I'm about to print. This problem started as soon as I upgraded to Sierra. It occurs in many applications - including in Microsoft Excel 2011.

  

  

  Hello, David Bry1,.

  Thank you for using communities of Apple Support.

  I understand that when you try to print from a number of different applications, you do not see the preview of the document you are printing. I would like to assure you that I see the preview as well when I print. Let's see how we can get this resolved.

  I advise you to ensure that the printer software is up-to-date on your printer Brother DCP-7065DN. Please choose 'Available Software' brother printer and scanner software for macOS Sierra, El Capitan, Yosemite, and Mavericks

  If a software update is available, please install and then test and see if you get the same result.

  Have an amazing day!

• Printer HP B209a does not get the IP address of my router

  Computer is a HP G71 running under Windows 7 64-bit

  Router is a NETGEAR's WNR3500L with the latest firmware and a unique SSID

  Using the latest version of the software install HP B209a

  Towards the end of the installation for the wireless feature, the installation stops and tells me that my PC is on a network other than my printer.  All wireless devices connected to my router have 10.0.0 # IP addresses.  Through many installs the printers IP address is constantly as 192.168.0.109.  The summary on the printer wireless shows my unique routers SSID but when I open my router software and devices attached, the printer is not listed.  My router is attached to a simple DSL modem with no wireless features.  I tried the following hotfixes recommended in these forums.

  1. Connect the printer to the router through WPS with push button.  Connection is returned as a success, but identified printer router SSID as grabbled alphanumeric characters and not an IP address.  Router does not show the printer in the devices.  During the printing installation software PC and printer fail to communicate when the USB cable is connected.
  2. Connect the printer to the router through WPS with PIN.  Connection is returned as a success, but all the information in the router has been changed and all other wireless devices disconnected.  Connection to the router has shown the SSID THAT became grabbled of alphanumeric characters and the security key was changed.  No wireless device was attached to the router, but the wired connections remain intact.  Fixed key SSID and security.  All other wireless devices back in place, printer does not have.
  3. Ping network devices.  Ping 10.0.0.1 to 7 came back as successful.  192.168.1.109 ping failed.
  4. IP address of the printer has entered into a browser address bar.  Returns a Google search page, but not for access to the network printer.  Address of more than one entry address bar and couldn't connect to 10.0.0.1 (router) and 192.168.0.1 (DSL modem)
  5. Unplug the DSL modem router.  All wireless devices to connect to the router but do not have access to the internet.  During the installation of the printer software, when you are prompted to connect the USB to the PC, printer and PC fail to communicate.
  6. Turned off the Windows Firewall, both public and private without success
  7. Used the Hp network diagnostic utility and it does not can find printer.

  I have installed and uninstalled the software several times.  The printer has always identified my identifier SSID is correct and the network key.  But during the finalization of installation I get the message and cannot connect PC printer because they are on different networks.  I have no idea where the printer receives the IP address.  It should be an address from the router, but it is not.  IP address of the modem DSL IS in the format # 192.168.0, but given that the modem is the base model with the wireless or network capabilities, the printer cannot logically connect to it.  I tried to unplug the router and the printer several times without success.  The possibility of changing the IP of the printer through the browser is not possible for the reasons given in 4.  What are the other options to change the IP address of the printer?  If I can assign an address # 10.0.0, I think it will solve my problems.

  Is your DSL modem is a modem/router combo (most are)?  If so, it probably has a structure of 192.168.0.X and is probably a wired router (only).

  This DSL modem/router is attached to the WAN, or one of the LAN ports on the back of the Netgear?  Try to move to the other type of port, and then restart both routers.

  On the front of the printer, click the settings 'Restore defaults' and wireless the wireless radio.

  Finally, the Netgear settings, here are some tips:

  1 make sure that DHCP is active, the SSID is not hidden and that MAC filtering is not enabled.

  2. ensure that the 802.11 g mode (as well as other modes is very well).

  3. use WPA or WPA encryption, not WEP (it is not secure and may cause connection problems)

  4 change the channel of the Netgear to 11 (Yes, I know it makes no sense, but it works).

• 5532 ENVY printer display does not exceed the setup button

  Hello

  I just bought the above printer and tried to put in place. I had it works from a windows vista PC if the functionality is all ok, but the screen on the printer itself will not move beyond the screen saying "retail demo" on the lower left and "set" in a blue box on the lower right.

  By pressing the blue button "setup" does nothing. Etc, rebooting I tried, but everything goes back to this screen. Linking the different tools of diag HP PC says everything is fine.

  I ran http://ftp.hp.com/pub/softlib/software12/COL47810/mp-115828-6/EN5530_198.exe who got the printer on the network correctly, but does not mention the error of the screen.

  Is there a way to reset it, or does go back to the shop?

  Good morning,

  I would wear the printer to the store and exchange for another.

  Kind regards.

• Device my printer brother printer had a paper jam. I fixed the jam but it always wiil me does not perform any print job.

  Hello

  My printer has a paper jam. I fixed the jam but it always wiil me does not perform any print job. What should I do?

  Sincerely,

  Misty

  Tuesday, October 23, 2012 13:38:01 + 0000, Misty Doran wrote:

  Hello

  My printer has a paper jam. I fixed the jam but it always wiil me does not perform any print job. What should I do?

  Call brother and ask them to say that a local place that services
  their printers. He brings them and get them to fix it.

  Ken Blake, Microsoft MVP

• error message indicates that the new 450 turbo label printer does not support the type of paper 119

  error message indicates that the new 450 turbo label printer does not support the type of paper 119

  Contact the society of the printer.  There is nothing that Microsoft or Windows, can do to force the printer to accept a type of paper, though it says it will not accept it.

• My computer does not accept the print command.

  My computer does not accept the print command.  He always questions me to save a file, I don't want to save a file.  How can I change this?

  Sherimcfalls,

  1. what operating system is installed on the computer?
  2. the problem occurs with any particular application?

  Method 1
  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2
  Try to set the default printer.

  Change your default printer
  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

• Put HP1012 in place. The installation process does not recognize the printer.

  I've made sure the device is on and the usb cable is connected.  Printer worked fine until I needed to reinstall the windows xp operating system.  Now reinstall the printer set up the software does not recognize the printer.  Before reinstalling the operating system, the printer worked great even if it is quite old.  I use the original CD game in the installation process.

  Problem solved.  I plugged the printer into different usb port cable and the computer immediately recognized the printer.  Previously, I had ports different usb, but not the one where he worked.  I have 7 usb ports on this computer, and it seems that one does not work.

• My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

  They are only updated office or all updates?

  For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

  then manually download and install the same.

  If all updates, perhaps consider the following general tips-

  Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services