Does not print WPSM54G and Vista for HP Deskjet 5150
At the risk of opening an old discussion, I couldn't find the answer in the archives here, but most son end in early 2008 so I guess that the problem has been resolved. I have a Dell Studio 1737 with Vista (32 bit), using a print server WPSM54G with a WRT54GS router. It will not print to a HP Deskjet 5150. It allows to print if I connect to the USB port directly to my laptop, so it should not be the driver.
My two posts of print job to the printer via the print server - they are XP based. Both work wireless is connected. It is unlikely that it is the router or the print server.
When you install the software on the laptop using the Linksys CD it gives a long message "Did not find the printer driver on your system" and so on. I tried all suggestions for example by using the original CD, downloading the driver from the site HP, removing all the drivers, and restarting. He continues to stop at this message.
I tried the lines of support tech for more than 6 hours now and have had no luck, they just put me in remote mode and check the router and then print server settings promising recalled. They have on occasion but no help. Also charged me $ 39 because they needed to check the IP address of the router that is no longer under warranty. I'm happy to pay money if this would solve the problem, but it didn't. Is there a solution out there like a firmware update or installation CD update or something to make the installation work with Vista?
Thank you for your patience.
Well I got it working. Perservance is paying off. I discovered the page Web for updates and drivers for linksys appears differently on my laptop, it does on my desk. In particular, the laptop didn't poster not the option update firmware and download the installation software. On my desktop, I noticed that she had these options. When I checked the release notes for the firmware version 1017, he says that it adds the LPR Protocol among others. I remember in your instructions, he said to put to LPR. I downloaded the new firmware for the print server and now the portable print very well.
Strange symptom if and misleading when he says the driver is not compatible, but it was a firmware issue. In the meantime my installation CD not working anymore, but at least now I know I can download it from the Web site on my desktop.
No idea why it will not display the firmware upgrade option on my laptop? I put all the advanced settings of the internet even under my desk.
Thanks again for your help. Hopefully my discovery on the firmware to help someone else.
Tags: Linksys Routers
Similar Questions
-
HP Officejet Pro 8500 does not print documents and reports for Quicken 2008
New computer will not print in Quicken 2008 software. Tried all the possible solutions. I installed Windows 7. I downloaded and installed the new software for HP Office Pro 8500 work with Windows 7. Software program Quicken 2008 order printing accordingly. All other software programs prints perfectly. Help! I get no support Quicken's help.
Message edited by Tiger-Pope on 28/10/2009 15:38Tiger-Pope wrote:
New computer will not print in Quicken 2008 software. Tried all the possible solutions. I installed Windows 7. I downloaded and installed the new software for HP Office Pro 8500 work with Windows 7. Software program Quicken 2008 order printing accordingly. All other software programs prints perfectly. Help! I get no support Quicken's help.You have the 64 bit version of Windows 7? This thread suggests printing from Vista 64 bit (and WIn 7 would be similar) is a problem in Quicken 2008 and 2009. The thread suggests there is a solution, but the link requires registration for the forum of Quicken and who did not work for me this afternoon.
-
C4480 does not print after upgrading Vista to Windows 7
Hello
I bought a C4480 & installed on my laptop running Vista. I bought recently installed Windows 7, it & printer worked OK. 2 days ago HP sent the file: PS_AIO_03_C4400_NonNet_Full_Win_WW_130_140.exe, (1/1, 205.09 M)
I downloaded & installed, now the printer does not print. It scans ok just will not be printed. Called HP & said it was Microsofts problem. told by Microsoft of $ 80 or reinstall my computer back to the factory default settings. Not knowing much about computers I'm not want to do. The computer tells me the spool of printer off & to start but when I open the printer spool is on. I hope you understand that this is my 1st post.
There is a patch for this here. Try it!
-
Installation and mounting and print worked fine for weeks.
Then I downloaded a regular update of windows, and there's no printer now listed.
I try to add a printer, and it does not work.
Control of HP says I have the right driver and the software loaded - I uninstalled and reloaded everything... nothing!
Everyone I have a problem / have a solution?
Hello, I have the Officejet 4630, sorry, I forgot to say, perhaps.
After you uninstall a bunch of updates to security windows and re - install, everything is now fine.
Thank you
Jennifer
-
LaserJet Pro CM1415fn: Printer does not print clear and precise output
The LaserJet Pro CM1415fn can print on fabric papers?
My fabric craft minor wife printed on papers project. She used to tape the corners of the tissue on normal paper first, but this caused the paper to jam. It then continues by gluing the tissue lightly on normal paper with a spray of glue.
Last week, the two toner cartridges yellow and cyan to run out of ink. I bought 2 new original HP cartridges and installed it this morning when I noticed that the test page is not very clear or sharp as it used to be. Lines and colors are too full. I wonder if the print on absorbent paper may have caused this problem.
Appreciate your support first clarify if we can continue to print on paper, fabric or not and the second how can I solve this problem.
Hi @AhmedAttia,
I see that you are having problems with the print quality after trying to print on absorbent paper. I want to help you solve this problem.
Here is a document from the printer's specifications and types of paper supported. Tissue paper is not recommended.
Specifications for HP LaserJet Pro CM1415fn and CM1415fnw color multifunction printers printer.
Calibrate the printer.
On the printer setup, configuration of the system, the print quality menu tap and select the item in the color calibration.
Select calibrate now.Print a Diagnostics Page and print a Page to see the results.
(it might be a specific toner, the origin of this problem)
On the printer, press setup, menu reports, diagnostics page.
On the printer, press setup, menu reports, print quality page.I have a document with a few steps to try to see if this will solve the problem.
Solving print quality problems.
If you need help, let me know.
Have a great day!
Thank you. -
Canon i865 printer does not print black using Vista
On my Xp computer the canon i865 printer works perfectly, however this computer is old and regularly stops. My son had his old computer that uses Vista, but the printer will not print at best, black. According to microsoft, the printer is compatible and I downloaded the recommended driver, tried to intervene on the settings, uninstalled and installed several times, etc.
Is there a fix or is it possible to transfer the Xp from my old computer to replace the Vista?Hello
Unfortunately not. I just posted a question on drive C of the computer Xp through the copy on drive D of the computer Vista and boot of it, that is to say use it with Xp. Maybe this is the way forward and I prefer Xp anyway. -
I have a printer Dell V305 that worked very well, but I'm more able to print anything from my laptop. Scanning, etc. still works but not the printing part. I have Windows 7 64 bit. He has a solid orange light on.
Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help -
Full view ink levels but does not print magenta and cian not on Officejet 6500AA.
Just installed new cartridges of magenta and cian in my Officejet 6500 a. Ink levels show as complete but no cartridge is printed.
You still have the old cartridges?
If Yes, try to install and see if the same issue exists. If they still have enough ink to be seen on the page, so it may be a problem with the print head.
You can try the troubleshooting of this article steps to clean the print head and it can solve the problem:
http://support.HP.com/us-en/document/c01661383
I hope that helps!
-
HP F4135 does not print photos computer Vista program
I have Vista (yay!) and the printer will print pictures more. I need this feature to do a job. Help, please. I have cleaned the printer with compressed air, but it did not help.
Hi sistrozzie,
What combination of flashing light can be seen? He's not picking the paper? You use the borderless printing option? Please see the information that describes the common sizes supported photo/card for this device (based on normal weight) below. The following steps may resolve the problem quickly. If you are still having problem a generic driver can help. Here is a link that will provide measures for this. Click here
Application used: clarification:
1. are you printing from Windows, Photoshop photo viewer, etc. ?
Quick steps:
1. check the card stock/photo support
2. try to print in the draft mode - select this option under the quality, try to send the print job
Stock photo/cards supported:
Cards 3 x 5 inches
4 x 6 inches
5 x 8 inches
A6 (105 x 148.5 mm)Photo Borderless (4 x 6.5 inches w / detachable tab total measure of 4 x 6 inches)
Borderless 10 x 15.2 cm w / detachable tab total measure of 10 x 15 cm
4 "x 6" w/tab (with border prints)
10 x 15 cm w/tab (with border prints)
Borderless 4 x 8 inches w/tab (Photo card)
Borderless 10 x 20 cm w/tab (Photo card)
4 x 8 inches w/tab (of card Photo prints with border)
10 x 20 cm w/tab (of card Photo prints with border)
Panorama borderless 4 x 10, 4 x 12 inches
Panorama borderless 10 x 25 cm, 10 x 30 cm
5 x 7 inches
13 x 18 cm
8 x 10 inchNote: Let me know the flashing light combination, additional steps may need to be taken based on the error state
I hope this helps!
-
C6150 does not print after upgrading Vista to Windows 7
Hello.
I have an AIO C6150, which worked fine under Vista. Since I've upgraded to Windows 7, I can't get a printout of any application or the windows test print. The test print HP Solution Center works very well.
-Printer is connected wireless
-J' installed the latest driver from HP which is supposed to be ready for Win 7
-J' have also installed the patch they recommend after upgrade to Vista
There is no error. Print job appears briefly in the Print Manager window, then disappears as if it printed. I am at a loss, any help would be appreciated.
Paul
I found my issue as well, with the help of HP technical support. Basically, it is a conflict between the generic drivers Windows and whole new drivers from HP. Once that happened, it was a nightmare to get all the 'remains' of these two uninstalled drivers. Once we did it, we have been able to recharge the HP driver package and everything works fine.
-
Original title: hade 8150 printer does not print
Under Vista Home Premium with all updates. The printer is a Photosmart 8150 H - P, which worked well for a few years. Now, when you send a document, for example, a Test page and looking at the queue, I immediately get an error. Re-installing the printer, unplug the USB and power and re-boot do not solve the problem. Grateful for any ideas. Thank you
Hello
(a) don't you make changes to the computer until the problem occurred?
(b) when was the last time it was working fine?
(c) you use a network printer or local?
I suggest you try the steps below and check if it helps
Printer in Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Hope this information is helpful
-
C7280 does not print... said yellow empty cartridge and is not
I am totally disgusted and frustrated because I've never been. I tried for hours to get a response of 'Community' to this problem. It has been reported a million times and I have yet to see a solution. The printer does not print colors and wrote the yellow cartridge is empty and it is brand new. I need to color, not black.
Tomorrow at Sams and a new Canon and this POS is going to the dumpster. This shit has been underway for two months, and I've tried many times to get an answer... What a waste...
Hello
If you have already replaced the cartridges, it seems that your ink system is to give you the question. I suggest to call HP @8004746836 and see what options we have to repair or replace the unit.
-
Hi, I bought my photosmart Hp 6520 year last, October. But it is no more print black after replacing ink twice. I tried to clean the print head with water and tried "clean print head" in tools, does not solve the problem...
What is wired is that I bought 4 new 564 inks the hp of the target 2 days ago, printed only less than 10 pages to see if the problem is resolved. Then my printer told me that the cartridge is too low... Is this possible?
It makes me crazy now... What is even worse, I used a tool to detect my printer, and he said that is no longer under warranty... But he was only 9 months... How can I solve this problem? Thank you.
The document here can help solve the black does not print on your Photosmart 6520. Be sure to check the vents, as on the three solution.
If this does not resolve the issue I suggest you call HP (1-800-HPINVENt to the United States, see here for details by the way). The warranty online tool is an estimate, they will have a process of updated the status of the guarantee if necessary.
-
What impression of recipes, photo prints, and the name, but the recipe does not print. I heard do that before, but not of Noah
Hello
OEM for the printer manufacturer is responsible for the proper functioning of the printer
and their drivers. Check with the printer manufacturer's support, their online
documentation and drivers and ask in their forums.Good luck, you need to update or reinstall the latest driver.
================================================
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Solve printer problems (Vista)
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsSolve printer problems (Windows 7)
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Open the printer (Windows 7) Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterDiagnose and automatically fix problems printing and printer (XP, Vista, Windows 7 &)
https://support.Microsoft.com/en-us/mats/printing_problems?WA=wsignin1.0Find the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers-------------------------------------------------------------------
Windows 8/8.1 - Fix printer problems
http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1Windows 8/8.1 - How to solve printing problems in Windows
http://Windows.Microsoft.com/en-us/Windows-8/How-to-solve-printing-problemsWindows 8/8.1 - install a printer
http://Windows.Microsoft.com/en-us/Windows-8/install-a-printerWindows 8/8.1 - set or change your default print
http://Windows.Microsoft.com/en-us/Windows-8/set-change-your-default-printerWindows 8/8.1 - device drivers - print & drivers
http://Windows.Microsoft.com/en-us/Windows/devices-drivers-help#hardware-drivers-help=Windows-8&V1H=win8tab3-------------------------------------------------------------------
Windows 10 - Fix printer problems<- printer="">->
http://Windows.Microsoft.com/en-us/Windows-10/fix-printer-problemsSupported Windows 10
http://Windows.Microsoft.com/en-us/Windows-10/supportI hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">-> -
Re Vista - printer does not print after canceling a print job even if I deleted the queue and stop the computer and the printer and restarted.
Hello
· try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer
You can also track information to try to solve your problems of printer below
read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other
Solve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
and read this microsoft tutorial too
Introduction
This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.
How to use this tutorial
For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
Maybe you are looking for
-
I use Amazon Cloud Player. This device has a limit on the amount of devices/account. I'm interested in hold/copy my Amazon cookies so that I can insert in a future version of Firefox - or another browser on another computer without ' limit ' Amazon.
-
Maximum RAM to HP Pavilion all-in-One MS228sc
Given that my HP Pavilion all-in-One MS228sc is more slow - even after the release of space on the hard drive that I do research on the possibility of an upgrade of RAM. The ins Pavilion "born" with 2 GB of RAM in the slots and 2 GB virtual RAM. My q
-
I want to know if is it possible to UNLOCK a new CPU or GPU for my laptop. I have a HP PAVILION DV7-7004SL, with 8 GB of RAM, intel core i5 - 2450M, nVidia GT 630 M, 17' inches. If I do overclock, I have every chance to unlock something? Maybe a low
-
I would like to configure my 4500 s 2 groups of users using local authentication. The first group would have access only to show commands and orders of tdr test. The other user group would have unlimited access. Is it possible to do this through loca
-
Changes of State DMVPN intermittent dmvpn
We run a double DMVPN hub and spoke configuration using the router ASR for hubs and 2811 routers for the spoke routers. Have passed us recently 3000 remote sites and discovered a problem in which we struggle with. On some routers spoke (we don't kn