Similar Questions

• Bridge does not refresh the thumbnails after changes in ACR.

  Bridge does not refresh the thumbnails after changes in ACR. Cultures made in ACR do not show more. I think it started after new ACR update. I have the last bridge and ACR and Photoshop.

  I thought about it. I have reset the settings of the bridge by pressing Command-Option-shift and then started bridge on my Mac. I lost my sight, I got but should display what I want to see again. But it solved the problem of the bridge not updated after modified ACR.

• HP Deskjet 710C does not print colors (also after changing the cartridge with a new one)

  HP Deskjet 710C on Windows XP

  Problem: Printer does not print color. Black printing works. It also does not print color now, I changed the color with a new cartridge. Remove the printer from Windows XP and reinstall also does not resolve it. Also by using the option in Windows/printer driver for the cleaning cartridge has failed. Anyone know a solution to this?

  There is a document about the lack of color of the issues on the printer Deskjet 710C that can be found here.

  I hope this helps!

• servers managed not able to restart after changing password in console

  IM doin the following the steps, I'm doing something wrong?
  all the 1) stop managed servers
  (2) change pwd in the administration console
  file boot.properties edit 3) with new pwd in server admin
  copy 4) these boot file on each managed server
  (5) now restart server admin. (able to do successfully)
  (6) not able to restart the managed servers (im getting the following error.
  Can any help me please very urgent?
  
  
  < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: authentication refused: Boot identity not valid; The user name and/or password in the identity of startup file (boot.properties) is not valid. The identity of start-up may have changed since the identity of boot file was created. Please edit and update the identity file to start with the correct values of username and password. The first time that the identity of starting update file is used to start the server, these new values are encrypted.
  weblogic.security.SecurityInitializationException: authentication refused: Boot identity not valid; The user name and/or password in the identity of startup file (boot.properties) is not valid. The identity of start-up may have changed since the identity of boot file was created. Please edit and update the identity file to start with the correct values of username and password. The first time that the identity of starting update file is used to start the server, these new values are encrypted.
  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization (unknown Source)
  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize (unknown Source)
  at weblogic.security.service.SecurityServiceManager.initialize (unknown Source)
  at weblogic.security.SecurityService.start(SecurityService.java:141)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  Truncated. check the log file full stacktrace
  
  < Opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >

  Hello

  (* 1) to export the data from the user on the server, I need to create a specific directory to save this data in the server messagerie.*
  Yes... You can give any path of directory existing in the AdminConsole export Page... Any directory in your file system.

  (* 2) y at - it another way to not export or import data? *
  It is the only way to prevent the loss of data... There are other ways to do it without using the administration Console as WLST using or using JMX, you can export data, but all of these techniques will do exactly the same thing... The AdminConsole is the best way to do it.

  .
  .
  Thank you
  Jay SenSharma
  http://middlewaremagic.com/WebLogic/ (Middleware Magic Is Here)

• BlackBerry Q10 ActiveSync does not synchronize my Contacts after changing to another Exchange Server

  I changed to another supplier of services of Exchange and now the problems with my Contacts on the Blackberry Q10. After the configuration of the new Exchange ActiveSync account, I observe the folliwng:

  1. New contacts created in Outlook / Exchange Server will not synchronize to the Q10.
  2. New contacts created on the Blackberry are synchronized backed the Exchange Server / Outlook Client.
  3. BlackBerry-Contacts are visible, but won't open (like "zombies").
  4. BlackBerry Contacts from other sources (Facebook, WhatsApp) are no longer bound together, in other words, it seems that the person has multiple contacts entries.
  5. Sending / receiving mails and work on the Blackberry calendar entries.

  I fixed it myself. Now, the Contacts are all back in, deduplicated and healthy. That's what I did, step by step, in settings > accounts:
  1 turn off Sync contact on the Exchange ActiveSync account
  2 delete the Facebook account
  3 remove account Skype and gmail
  4. run "Delete local Contacts"
  5. in Contacts, check the number of Contacts: contact no.
  Then in settings > accounts:
  6. turn on synchronization of Contact for an Exchange account
  7. This brought all Exchange contacts
  8. Add Facebook, Skype and a gmail accounts.

  END

• BLACK ink cartridge does not come back up after changing the cartridge.

  I replaced the cartridge a few days ago and it was printing fine, but today, I tried to print something

  and it was like all other lines... lines, it wasn't like there was just a spot of ink on the

  paper anywhere in the line.  After detach the cartrdige, can't do it back up again in the printer.

  What could be wrong?

  Hello.

  It would be useful to know what model of printer you have.

  See you soon.

• my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  my browser cannot open google and facebook and other https sites that it does not open even the app store does not work, I tried to change my DNS google DNS and disable IPv6 but still no use, help PLZ!

  You may have installed one or more variants of the malware "VSearch' ad-injection. Please back up all data, and then take the steps below to disable it.

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  Malware is constantly evolving to work around defenses against it. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Step 1

  VSearch malware tries to hide by varying names of the files it installs. It regenerates itself also if you try to remove it when it is run. To remove it, you must first start in safe mode temporarily disable the malware.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for other instructions.

  Step 2

  When running in safe mode, load the web page and then triple - click on the line below to select. Copy the text to the Clipboard by pressing Control-C key combination:

  /Library/LaunchDaemons

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named "LaunchDaemons" can open. If this is the case, press the combination of keys command-2 to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click this title two times to sort the content by date with the most recent at the top. Please don't skip this step. Files that belong to an instance of VSearch will have the same date of change for a few minutes, then they will be grouped together when you sort the folder this way, which makes them easy to identify.

  Step 3

  In the LaunchDaemons folder, there may be one or more files with the name of this form:

  com Apple.something.plist

  When something is a random string, without the letters, different in each case.

  Note that the name consists of four words separated by dots. Typical examples are:

  com Apple.builins.plist

  com Apple.cereng.plist

  com Apple.nysgar.plist

  There may be one or more items with a name of the form:

  com.something.plist

  Yet once something is a random string, without meaning - not necessarily the same as that which appears in one of the other file names.

  These names consist of three words separated by dots. Typical examples are:

  com.semifasciaUpd.plist

  com.ubuiling.plist

  Sometimes there are items (usually not more than one) with the name of this form:

  com.something .net - preferences.plist

  This name consists of four words (the third hyphen) separated by periods. Typical example:

  com.jangly .net - preferences.plist

  Drag all items in the basket. You may be prompted for administrator login password.

  Restart the computer and empty the trash.

  Examples of legitimate files located in the same folder:

  com.apple.FinalCutServer.fcsvr_ldsd.plist

  com Apple.Installer.osmessagetracing.plist

  com Apple.Qmaster.qmasterd.plist

  com Apple.aelwriter.plist

  com Apple.SERVERD.plist

  com Tether.plist

  The first three are clearly not VSearch files because the names do not match the above models. The last three are not easy to distinguish by the name alone, but the modification date will be earlier than the date at which VSearch has been installed, perhaps several years. None of these files will be present in most installations of Mac OS X.

  Do not delete the folder 'LaunchDaemons' or anything else inside, unless you know you have another type of unwanted software and more VSearch. The file is a normal part of Mac OS X. The "demon" refers to a program that starts automatically. This is not inherently bad, but the mechanism is sometimes exploited by hackers for malicious software.

  If you are not sure whether a file is part of the malware, order the contents of the folder by date modified I wrote in step 2, no name. Malicious files will be grouped together. There could be more than one such group, if you attacked more than once. A file dated far in the past is not part of the malware. A folder in date dated Middle an obviously malicious cluster is almost certainly too malicious.

  If the files come back after you remove the, they are replaced by others with similar names, then either you didn't start in safe mode or you do not have all the. Return to step 1 and try again.

  Step 4

  Reset the home page in each of your browsers, if it has been modified. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

  If you use Firefox or Chrome web browser, remove the extensions or add-ons that you don't know that you need. When in doubt, remove all of them.

  The malware is now permanently inactivated, as long as you reinstall it never. A few small files will be left behind, but they have no effect, and trying to find all them is more trouble that it's worth.

  Step 5

  The malware lets the web proxy discovery in the network settings. If you know that the setting was already enabled for a reason, skip this step. Otherwise, you should undo the change.

  Open the network pane in system preferences. If there is a padlock icon in the lower left corner of the window, click it and authenticate to unlock the settings. Click the Advanced button, and then select Proxies in the sheet that drops down. Uncheck that Auto Discovery Proxy if it is checked. Click OK, and then apply.

  Step 6

  This step is optional. Open the users and groups in the system preferences and click on the lock icon to unlock the settings. In the list of users, there may be some with random names that have been added by the malware. You can remove these users. If you are not sure whether a user is legitimate, do not delete it.

• I'm looking for a link to XP SP1 does not require a network connection to install

  I'm looking for a link to XP SP1 does not require a network connection to install

  Were you recently doing a Clean Install? I ask because you are implying in your installation of Windows XP is in 'gold' or SP0 (i.e., pre - SP1) level. Well sure, automatic updates will not work!
  You can use this path to level – says in passing:
  Gold XP to XP SP2 to XP SP3.
  Note that installing SP1a is TOTALLY USELESS!
  Here are the detailed instructions:

  1. download the installation of SP2, SP3 and IE8 files. I prefer to keep these on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=28 (for SP2)

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  And if you wish, download the Setup file of a good anti-virus program. I recommend Avira free Antivirus:

  http://www.Avira.com/en/Avira-free-antivirus

  2. disconnect Internet.

  3. temporarily disable the automatic updates.

  4. install SP2. Restart twice.

  5 install the SP3. Restart twice.

  6 switch to IE8. Restart twice.

  7 install an Antivirus software.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  8 make sure that firewall Windows is activated (it should be).

  (Now you can physically reconnect to the Internet.)

  9 visit Windows Update to download and install only the critical security updates.

  10 re - enable automatic updates.

  After the back if you need guidance.

• Checking update Java plug-in does not show latest version after update same

  Checking update Java plug-in does not show latest version after update same

  You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

  See also:

  • Article on Java Mozilla - https://support.mozilla.org/en-US/kb/use-java-plugin-to-view-interactive-content
  • VΘrifier versions on site Java - http://www.java.com/en/download/installed.jsp

  Other - you should check your Plugins and update as needed.

  • Check your Plugins - https://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in, version 11.6.7.637 (aka Shockwave Player. Not the same as Flash/Shockwave Flash/Adobe Flash Player)
    • http://KB.mozillazine.org/Shockwave (mozillazine.org seems to be down at the moment (12/12/2012 11:34 am PDT), try again later)
    • Download, save, exit/close all browsers, run the installation program you just downloaded - http://get.adobe.com/shockwave/thankyou/
  • Adobe PDF plugin for Firefox and Netscape 10.1.4 (Adobe Reader 11 is the current version)
    • https://support.Mozilla.org/en-us/KB/use-Adobe-Reader-plugin-view-or-download-PDF-files

• Why NEITHER-ICU does not require licensing OR?

  Hello

  I'm running into some problems of deployment of a CVI application that uses OR-ICU libraries.  The application works well on my development computer.  I create an installer that includes the runtime of CVI and NOR-USI 1.9.0 and install my application on a new system that is running Windows XP.  In my application when I try to call DDC_OpenFileEx (...) I get an error-6204 DDC_UnexpectedError.

  In any case, I thought I must be missing some components, and after some trial and error I finally understood that to get my application runs correctly, I need to install the 'NOR LabView 2011 deployable license' that belongs to the duration of LabView 2011 Installer (I don't actually install the runtime engine itself, just the deployable license).  It seems that this installs the License Manager OR who has no effect except the report as "No installed licenses".  Quite frankly, this is meaningless.  Why NOT-ICU does not require the License Manager?  Is this the intended behavior or is this a bug?  Are there other components should I install to make sure that the NOR-USI will work properly?  Thank you.

  Hey tstanley,

  Thank you for sending me the files you did. They helped me to get to the bottom of the issue. NOR-ICU is based on Microsoft Visual C++ 2005 Runtime, which is not included in the component of NOR-USI. This is usually not noticed because CVI runtime engine does include, as well as several other software packages such as licensing Manager OR. It can also be the case that some users have already installed. However, if your distribution uses merge module for the RTE CVI deployment (either you have disabled some of the subcomponents of the RTE in the distribution or if you have chosen to install the RTE in the application directory), then MSVC 2005 is not included in your Setup.

  There are two simple solutions to avoid this problem:

  1. Include the RTE CVI full in your distribution.
  2. Install the redistributable Microsoft Visual C++ 2005 on the system target (you could package installer in your distribution). You can download it from Microsoft here.

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• The editor Lite Cinema 4 d does not open of in After Effects.

  The editor Lite Cinema 4 d does not open of in After Effects. I am able to create new files of MAXON Cinema 4 d from the file > new menu and comes from the file > export menu. I am able to use cinema 4 d effect on a layer to display a file 'c4d' next to a composition. But when I click on Edition > edit the Original option of a '.cd4' drop my mouse icon changes to "pending" for a second, as if he's going to open something, but then nothing happens.

  I'll double check the path of the cinema 4 d application Lite.
  I temporarily increased for 'control' permissions on the following folders

  • Program files (x 86) \Adobe
  • \Users\[user]\AppData\Roaming\Adobe
  • \Users\[user]\Documents\Adobe

  I am running:
  After Effects CC 13.7.1.6.
  Windows 10 PC
  Processor is Intel i7 - 4770 k @ 3.50 GHz
  16 GB OF RAM
  GeForce GTX 970

  I found a solution for anyone to live something similar: launch After Effects in as long as administrator and then C4D Lite will launch AE Edit--> Edit Original

• This virtual machine to become protected vsphere HA and HA can not try to restart after a power failure

  I got a 5.1 cluster with some problems HA.

  a few virtual machines are showing this

  This virtual machine to become protected vsphere HA and HA can not try to restart after a power failure.

  When I try to reconfigure HA on the host. It times out and fails.

  any idea?

  Instead of reconfiguring HA on the concerned host, have you tried to disable HA on the cluster and enable again? See: VMware KB: State of the virtual machine changes from protected to Unprotected

• My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  My Photoshop CC 2015 does not work correctly. After I edited some photos and I want to meet one of them, the program Terminates? After reboot, the program charges all files again...

  Hello

  Make sure that Photoshop is closed.

  1 - go to this place C:\Users\user name\AppData\Roaming\Adobe\Adobe 2015\AutoRecover CC in Photoshop

  You will be able to see all the. PSD file that opens automatically when Photoshop is open, delete or move all the files in this folder.

  2 - restart Photoshop and go to edit > preferences > performance UN check the gpu processor use and restart Photoshop.

  It should be working fine now.

  Thank you

• iTunes does not recognize my devices after the last update

  iTunes does not recognize my devices after the last update. Has crossed all suggestions from the support page (uninstalling/reinstalling driver USB, remove Lockdown folder and so on) but still no joy. iPhone continues to ask if I want to trust to the connected computer, responding 'Yes' has no effect.

  Help, please

  Thank you

  Cyana

  Found this solution here:

  Re: Does not recognize devices in iTunes on PC

  works very well