servers managed not able to restart after changing password in console
IM doin the following the steps, I'm doing something wrong?all the 1) stop managed servers
(2) change pwd in the administration console
file boot.properties edit 3) with new pwd in server admin
copy 4) these boot file on each managed server
(5) now restart server admin. (able to do successfully)
(6) not able to restart the managed servers (im getting the following error.
Can any help me please very urgent?
< critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: authentication refused: Boot identity not valid; The user name and/or password in the identity of startup file (boot.properties) is not valid. The identity of start-up may have changed since the identity of boot file was created. Please edit and update the identity file to start with the correct values of username and password. The first time that the identity of starting update file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: authentication refused: Boot identity not valid; The user name and/or password in the identity of startup file (boot.properties) is not valid. The identity of start-up may have changed since the identity of boot file was created. Please edit and update the identity file to start with the correct values of username and password. The first time that the identity of starting update file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization (unknown Source)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize (unknown Source)
at weblogic.security.service.SecurityServiceManager.initialize (unknown Source)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. check the log file full stacktrace
< Opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >
Hello
(* 1) to export the data from the user on the server, I need to create a specific directory to save this data in the server messagerie.*
Yes... You can give any path of directory existing in the AdminConsole export Page... Any directory in your file system.
(* 2) y at - it another way to not export or import data? *
It is the only way to prevent the loss of data... There are other ways to do it without using the administration Console as WLST using or using JMX, you can export data, but all of these techniques will do exactly the same thing... The AdminConsole is the best way to do it.
.
.
Thank you
Jay SenSharma
http://middlewaremagic.com/WebLogic/ (Middleware Magic Is Here)
Tags: Fusion Middleware
Similar Questions
-
Not able to connect after changing the password using the VALUES ALTER clause
Hello
John explained earlier the clause VALUES below thread.
Status expired
I created a new account named SURI, and tried to use the password of the user account from the HR by using the VALUES clause. I was able to change the password but not able to connect SURI with HR password.
Please see below for details. And the SQL statements that I have tried.
Thank youSQL*Plus: Release 10.2.0.1.0 - Production on Mon Aug 13 18:44:50 2012 Copyright (c) 1982, 2005, Oracle. All rights reserved. Enter user-name: sys as sysdba Enter password: Connected to: Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production SQL> SELECT password 2 FROM dba_users 3 WHERE username = 'HR'; PASSWORD ------------------------------ 4C6D73C3E8B0F0DA SQL> ALTER USER SURI IDENTIFIED BY VALUES '4C6D73C3E8B0F0DA'; User altered. SQL> SELECT password 2 FROM dba_users 3 WHERE username='SURI'; PASSWORD ------------------------------ 4C6D73C3E8B0F0DA SQL> conn suri/hr -- HR account's password is hr only ERROR: ORA-01017: invalid username/password; logon denied Warning: You are no longer connected to ORACLE. SQL>
SuriIts because you have used a different username.
Oracle produces a hash based on the user name and the password, not only the password.Therefore, you can not use the hashed password of a user to log on to the account of another user.
You need to get the password hashed Suri and then connect you to suri by using the password hashed Suri (using the identified by the syntax of values)
-
Laptop is not able to restart after the installation of SP1
I have a Toshiba laptop which has Vista Home Basic.
I installed SP1 last week and everything worked fine.
EXCEPT with SP1 I could not connect my iPod and so I decided to do a restore of the system for when I didn't have the SP1.
My iPod has continued to have problems anyway.So just today. I tried to reinstall SP1.
Let him set up. Everything seems to happen normally.
I came back a couple hours later and my laptop has a black screen.
It also has white text:!! Oxc01a001d! 9006/94145 (\Registry\Machine\COMPONENTS\DerivedData\...)
I turned off the laptop and tried to restart my laptop.
It is said that you cannot start Windows. I tried to do a repair. And I get a notification saying that he is unable to repair the computer automatically. And I tried to make me do a system recovery. ((I will not attempt recovery of the system until I know I must. Because I did not know this update was extremely important and have not backed up my files))Again, I rebooted and this time I tried to start Windows normally.
Yet once, I get the above code.
So I guess that the laptop is verification of files? before we start?
This code is constantly flashing/blinking way glitch. (I hope this is necessary)I think I can assume that this is not a good sign.
Can someone help me? And I would like to know what to do?
My idea is now to let sit and try to load all the files, otherwise I'll do a reinstall System...:]BTW: At this time I had my laptop on the white text. And my computer is in standby mode. I tried to 'wake up' and now the screen is all black. Now I'm afraid it is stuck in standby mode, which has also held several weeks ago...
Hi Kare C.
Here's a link with information on the replacement of your media.
http://support.Microsoft.com/kb/326246
If you install XP, you must perform a clean installation. Windows 7 is in Release Candidate and can be downloaded from the link below.
Windows 7 has not yet a scheduled publication date.
Thank you for using answers Forum. Please let us know how it works.
Joseph
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Does not required HSS restart after changing AD user password?
It's the ps3...
Hello
You change the AD Service user password? (User ID used to pull all users) If yes then restart them Services, if it is for any particular user or all user, simply select the refresh option now under
Security tab in the section MSAD to refresh quickly or it will take 60 minutes by default to HSS for synchronization with the AD
Hope this helps
Kind regards
Zohra.
-
Can not connect to computer after changing passwords
My son borrowed my computer and changed the user to loggin to the computer account and forgot the password so I'm stuck on how to change the password
Unfortunately, this being a forum supported by Microsoft, you arrive on the only place on the web where you won't get much help with this problem. The best we can do is to direct you to the following article (which has useful suggestions).
"Microsoft's strategy concerning lost or forgotten passwords"
<>http://support.Microsoft.com/kb/189126 >If this is not enough, I encourage you to keep looking for an answer also.
HTH,
JW -
I got a 5.1 cluster with some problems HA.
a few virtual machines are showing this
This virtual machine to become protected vsphere HA and HA can not try to restart after a power failure.
When I try to reconfigure HA on the host. It times out and fails.
any idea?
Instead of reconfiguring HA on the concerned host, have you tried to disable HA on the cluster and enable again? See: VMware KB: State of the virtual machine changes from protected to Unprotected
-
Bridge does not refresh the thumbnails after changes in ACR.
Bridge does not refresh the thumbnails after changes in ACR. Cultures made in ACR do not show more. I think it started after new ACR update. I have the last bridge and ACR and Photoshop.
I thought about it. I have reset the settings of the bridge by pressing Command-Option-shift and then started bridge on my Mac. I lost my sight, I got but should display what I want to see again. But it solved the problem of the bridge not updated after modified ACR.
-
Original title: the awduu36e.sys file is not found.
After a repair of windows XP SP3, I receive, at startup, the message "the file awduu36e.sys is not found. Press a key to continue"- I can't press a key because the keyboard is not recognized or active at this point in the trunk, although I can access the BIOS earlier in the cycle. I tried to boot from the CD from Microsoft but get the same problem. -Any ideas please?
"cadastra" wrote in message News: 80941b1a-7 c 69-4f05-a259-560357b7f291...Hi Kim,
First of all thanks for respone and sorry for the delay to return but am in Australia so bit of a lag in time!
OK the sequence goes as follows:
1 gigabyte MB BIOS screen - at this stage sensitive keyboard and I can access BIOS OK.
2. new screen - PCI resources; Checking DMI Pool etc. ;
3. new screen - "Please choose which startup option:
-Windows XP Home Edition
-Installation of Windows XP.
and countdown etc. - from this point in the sequence of the keyboard does not respond so cannot select the OS and inadmissible F8, then highlighted option default selected that is configured.
4. new screen - "check you computer hardware configuration...".
5. new screen - "the file awduu36e.sys is not found. Press a key to continue. "
As the keyboard is unresponsive after the BIOS screen I have no way of influencing the order above.
Other relevant points:
-When you make commissioning/repair day I received the message to halfway through - "awduu36e.sys file is not found" and the option start over or ignore; after another attempt to a couple of times I chose skip so I guess that I got myself into this mess. What is awduu36e.sys anyway?
-My copy of Windows XP Home Edition SP3 OEM is and has been installed when I got to the machine, so I think that some repair options are not available for me in any case.
Again thank you very much for the reply and any help you can provide,
Kind regards
Fraser
Looks like you are leaving it too late to use F8 (must be before the OS options appear)- and you have a partial installation of some versions of Windows in progress seeking the file on a CD.
--Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers
-
HP Deskjet 710C does not print colors (also after changing the cartridge with a new one)
HP Deskjet 710C on Windows XP
Problem: Printer does not print color. Black printing works. It also does not print color now, I changed the color with a new cartridge. Remove the printer from Windows XP and reinstall also does not resolve it. Also by using the option in Windows/printer driver for the cleaning cartridge has failed. Anyone know a solution to this?
There is a document about the lack of color of the issues on the printer Deskjet 710C that can be found here.
I hope this helps!
-
Friday morning I wasn't able to boot my computer more. When I start my computer it won't seek to set a parameter nr 3 of 3. And then it restarts again. My computer tried to install some windows update settings the day before with no success. I Don t remember what it was. I got Vista SP2
The same problem happends to my computer from friends four days, after she start a windows update installation. But it has solved its problem by using the Windows installation CD and use the repair tool.
For me, my Windows installation CD I got from Dell does not work. Not the tool repair or startreparation. And I have no reference system to return.
What should I do? I don't want to reinstall windows again, I have a lot of information on the computer I need to.
All the world has noticed this problem?
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
See you soon.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If the above does not work, try to make a Bootable ERD to do a Startup Repair:
As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.
As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
You can make a tool to restart system, System Restore, etc. with it.
Read all the info on the website on how to create and use it.
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner: http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista repair disc.
You can do a system restart tool, system, etc it restore.
There is not a disk of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the ISP above Mathods to solve your problems, save your data using one of the methods below, and then reinstall Windows:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner
-
WRT160N V3 does not restart after change of IP address
I have a router WRT160N V3 I want to use it as an access point to improve the signal strength on the floor of our House. When I change the address LAN IP of 192.168.1.1 to 192.168.1.2, disabled the DHCP server and save the settings, it says.
The settings are successful.
After a few seconds, you will return to the previous page.
However, he never returns, regardless of how long you wait. After that, he won't answer originally 192.168.1.1 address or the 192.178.1.2 new address. I can reset the router back to the default 192.168.1.1, so the firmware is not damaged. Just to be sure, I downloaded and reloaded the latest firmware V3, but there are always the same. I can make changes to the configuration wireless, admin settings, etc. and she always accepts the change refers to the management software. The only problem occurs on the main configuration page when you try to save the changes.
Has anyone ever experienced this before?
Thank you
Phil
Rockstar - thank you! I established the second 192.168.1.2, successfully ping router it and was able to access the router software. Your comments and instructions made perfect sense, once that I thought about what I was doing.
A great way to finish the day.
Phil
-
Office stuck in a loop of starting Windows XP restart after changing the map of memory of RAM DDR
I added that a card of memory DRAM DDR to my CPU ENPower and immediately after my monitor has not received a signal. Then, after reading several articles, I cleaned the CMOS battery, and although he got the monitor works he has also prevented my system to boot with the Windows XP operating system. I've accessed the CMOS utility to change the date/time, nothing helps I still can't get in Windows XP and the user login screen. Now, the system passes through 1 and 2 screens that are part of the commissioning, then lands on the Safe Mode Options screen by which he gets "stuck" not allowing me to select the data options, then it will auto restart every 30 seconds.
The screen message reads:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. If your computer stopped responding, restarted unexpectedly or has been automatically closed down to protect your files or folders, select last good known Configuration to return to the most recent settings that worked. If a previos startup attempt was interrupted due to a power failure or because the power or Reset button was pressed, or if you are not sure what caused the problem, choose Start Windows normally. »
Safe mode
Safe mode with networking
Safe mode with command prompt
Last good known Configuration
Start Windows normally
All the these appear on the same screen, but I have no opportunity to select one of them during this mode my pc in.
What should I do? I need to access the BIOS utility to change the settings of the RAM, or is there something else that I forgot who will be able to get my pc to the top and running properly again?
Thanks for your advice in advance!
Remove the memory module that you added. If the computer can be started without him, then the module is defective or is not compatible with your computer.
-
BlackBerry Q10 ActiveSync does not synchronize my Contacts after changing to another Exchange Server
I changed to another supplier of services of Exchange and now the problems with my Contacts on the Blackberry Q10. After the configuration of the new Exchange ActiveSync account, I observe the folliwng:
- New contacts created in Outlook / Exchange Server will not synchronize to the Q10.
- New contacts created on the Blackberry are synchronized backed the Exchange Server / Outlook Client.
- BlackBerry-Contacts are visible, but won't open (like "zombies").
- BlackBerry Contacts from other sources (Facebook, WhatsApp) are no longer bound together, in other words, it seems that the person has multiple contacts entries.
- Sending / receiving mails and work on the Blackberry calendar entries.
I fixed it myself. Now, the Contacts are all back in, deduplicated and healthy. That's what I did, step by step, in settings > accounts:
1 turn off Sync contact on the Exchange ActiveSync account
2 delete the Facebook account
3 remove account Skype and gmail
4. run "Delete local Contacts"
5. in Contacts, check the number of Contacts: contact no.
Then in settings > accounts:
6. turn on synchronization of Contact for an Exchange account
7. This brought all Exchange contacts
8. Add Facebook, Skype and a gmail accounts.END
-
Windows 8 is not able to update after update to 8.1
I have a Sony Vaio laptop all in one office, i5processor, svj202 13cxw, 750 GB Hdd and 4 GB of ddr3 ram memory, which came with a stock of windows 8.
I've updated to 8.1 windows when they are available.
I got errors and my video driver continued to plant, so I did a system update,
(where it UN-installs all programs I installed, but keeps all my personal documents).
This brought me to windows 8, not the 8.1 which I was previously on.
Then my computer would not start because of the bootloader windows losing a file, cause of grub 2, if
I then did a System Restore ( option in mode Assist based computers Sony laptop/desktop computers).
When I did this, I now return to normal, so I've updated all over 'Sony updates' to go to windows 8.
but when I try to Update windows, it just stays on, the download of updates to 99, but nothing does ever download.
I then used Update utility Troubleshooting window, which displays 3 errors, Microsoft where 2 say where fixed and the other
says repair of missing or damaged files (see attached copy).
I then ran CMD in administrator mode, typed in [sfc/scannow], without square brackets, and it came with.
""Windows resource protection did not find any breach of integrity. ". " So I got no corrupted files repair.
I just want to go back to windows 8.1 and windows not in store and I said, he used up all of my updates are processed.
Please help me and if I re - install Windows 8 entirely on my own, Download load an iso and reformat and reinstall, how I can activate when
I don't have a serial number for one that came with my office. In addition, this computer is only 2 months and still under warranty from Sony, but
They claim that it is a software problem, not hardware. They do not provide that reinstall all the software that I am available and trying to talk on the phone
was a headache. Please help if possible or just reply that you don't know what to do and I'll continue my work until I have understand something.
Here's what I got after I ran Microsoft Windows Update troubleshooting utility:
Problems found Search for the missing or corrupt
filesCheck
for missing or corrupted filesDetectedFix missing or corrupt filesCompletedWindows Update error code
0 x 80070057(2014-03-09-T-01_51_39P)Windows
Update error 0 x 80070057(2014-03-09-T-01_51_39P)FixedStore data to reset Windows UpdateCompletedRecent installation problems
updatesProblems
installation of recent updatesFixedFix Windows UpdateCompletedPotential problems that have been verified Environment of Windows Update
the variables are incorrectWindows
Environment variable update are incorrectThere is no questionSome security settings are
missing or changedSome
security settings are missing or have been modifiedThere is no questionRegistration for the service is missing or damagedService
registration is missing or damagedThere is no questionWindows Update Services are not runningWindows
Update Services are not runningThere is no questionEncryption services components are not
registeredCryptographic
service components are not registeredThere is no questionProblems foundDetection
Details6Search for the missing or corrupt
filesDetectedFix missing or corrupt files CompletedOutput of the SFCOutput: Windows resource protection did not find no integrity
These violations.6Windows Update error code
0 x 80070057(2014-03-09-T-01_51_39P)FixedReset Windows Update data
storeCompletedDataStoreAndWULogFiles.zip18.77 MB Name of the file: DataStoreAndWULogFiles.zip 6Recent installation problems
updatesFixedFix Windows Update CompletedWindows repair
Update of services and
dependenciesPotential problems that have been verifiedDetails of detection Windows Update environment variables
are incorrectThere is no questionSome security settings are missing
or have been changedThere is no questionRegistration for the service is missing or
CorruptThere is no questionWindows Update services are not
runningThere is no questionEncryption services components
is not registeredThere is no questionDetails of detectionError reportRootCause: RC_DataStore Error code: 0 x 80070057 TimeDetected: 2014-03-09-T-01: 51:39 P Collected filesName of the file: CheckSURLog.cab The service statusProblem with the BITS service: the requested service has already been
has started. More help is available by typing NET HELPMSG
2182.Collection information Computer name: THEDARKNIGHT Version of Windows: 6.2Architecture: x 64Time: Sunday, March 9, 2014 01:50:24
PMPublisher detailsBackground Intelligent Transfer Service Find and solve problems that
can prevent work background downloadsPackage version: 1.2.1.20131113Publisher: Microsoft CorporationWindows Update Find and fix problems with
Windows UpdatePackage version: 8.1.1.20131113Publisher: Microsoft
Corporationhttp://Windows.Microsoft.com/en-AU/Windows-8/why-can-t-find-update-store
Why I can't update in the store?
Although the Windows 8.1 update is downloaded and installed from the store, your Windows PC needs updates, 2871389 KB and KB 2917499, until Windows 8.1 is available in the store.
or
You must refresh the content in the store.
-
WRT54G not able to save the changes
Hello
For some time I had to reset it to get back on the net is sometimes it and the modem so that it connects.
I went and turned off my wireless a few week ago and it worked, now if I open the web page and make a change and click Save it hang to the top and bottom left corner it error to say that on the page and disconect me from her, if I try to open it again it canoe page say will show until I have reset.
I even used the cd that came with it and it did not help.
And I think that it is only about a year.
And do a firmware update does not work, all I try to do is disconect me from her.
Any idea on what it could be and how to fix it?
Thank you in advance.
Hello
I just did a hard reset again and now he of seems very well, maybe I did him not give enough time for it the first time.
I went and turn on the wirless smoothly.
Thank you very much for your time and I will keep this site in mind.
Maybe you are looking for
-
What happened to the version patches-new organ is acting weird bug
IMAC 2.66 GHz Intel Core 2 Duo 4 GB. Recently updated to OS 10.11.6 and Logic Pro X version 10.2.4. Have had all kinds of strange things going on acting buggy. Is to assign a piece for organ, but impossible to find patches of organ in what were befor
-
Cannot display all the e-mail on mozilla servers
I have 4 email accounts (msn, comcast, google and gmail). I have no idea of what I did, but now all I can see and/or set up is "msn." column which housed all e-mail accounts and their subsets (Inbox, sent, trash etc.) disappeared. I went into the det
-
Problems of its satellite A40->; after that restart everything works again
Hi guys I had a problem with the sound on my Satellite A40 last night but I turned it off to go to sleep and now it works? What the hell went wrong my microphone does not work either.
-
ReadyNAS 104 to 314 #26833764
Hiya I have a readynas 104 with 6 TB drives in there, I want to move to a readynas 314 to be able to use the maximum storage space Can I just slide my readers of the 104 in the 314 and not lose my data? Thank you
-
OfficeJet J4680: HP Officejet J4680 - Windows 10
I upgraded my OS from Win 7 to 10. While on my laptop HP programs and detection of the printer worked (WiFI), on my PC, it failed to recognize my printer that was installed. by pugging USB cable it acknowledged him as a scanner and it works through t