HP Deskjet 710C does not print colors (also after changing the cartridge with a new one)

Similar Questions

• Office Jet 6500 E710n-z will not print black even just replace the cartridge with a new one.

  This is the 3rd time having problems on "black" even printing ink isn't empty (but the level is low, like a quarter left).  In the previous cases, I replaced the cartridge and the problem resolved.

  The 2nd time was last week.  After I changed the cartridge, it worked (for only 1 week) and the problem is back.  As the ink is full this time and it worked fine when I just changed it, I suspect it is the problem of my printer instead of the cartridge.

  I did clean the print head and align the print heads, but the problem persists.  Please advice solution.  Thank you!

  I hope that the printhead has no need replace. I would like to look at this document on faulty production for your printer model.  I know some steps here mentioned you already make. Please just read / ignore those and try the ones you have not yet completed.  It presents various ways to clean the print head; If you have just done the cleaning of the box tools, I'd defiantly that manual. It also has a ride to make sure that the product firmware is up-to-date.  Here is the link: http://support.hp.com/us-en/document/c02455482

  I hope this helps.

• My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

  I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

  Thank you!

  Hi @Beaglemom49779,.

  I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

  Have you had the same problem with the printer before replacing the toner?

  It could be a hardware or with the printer fuser problem.

  If the problem started just after replacing the toner then most likely, the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Number one cause of problems with toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

  Good day!
  Thank you.

• Photosmart 6515 does not print black ink after replaced the cartridge

  I am very frustrated! I can't get my Photosmart 6515 print black ink.

  Our school sends the documents by e-mail now that we have to print at home. Ideal for them, but not for me. They are usually in PDF format, so I do not have the ability to edit and change the blue color to print, either.

  I only use HP cartridges on this printer. I know it's more than a year, in order to call phone support will do no good.

  I replaced both cartridges and now it shows black ink completely full, but when I print the printer status report, black is not displayed. Black does not appear on the tool pages, either.

  I tried the command "clean printhead" several times. I unplugged and waited. I took all the cartridges. Connections look clean.

  What should I do to perform a partial reset or full?

  Hi Photokool,

  I understand that this has been a frustrating experience for you, and I want to help him.

  I will send you a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• BLACK ink cartridge does not come back up after changing the cartridge.

  I replaced the cartridge a few days ago and it was printing fine, but today, I tried to print something

  and it was like all other lines... lines, it wasn't like there was just a spot of ink on the

  paper anywhere in the line.  After detach the cartrdige, can't do it back up again in the printer.

  What could be wrong?

  Hello.

  It would be useful to know what model of printer you have.

  See you soon.

• DeskJet F4180 does not print color?

  It would not print in color; I checked the settings of the printer.  I did a scan alignment.  I did a test of color.  I went and bought the new cartridge.  Does not print color.   Black prints fine, clear

  help my son has a project for school in the morning

  Thank you

  There is a document on colors missing or faded print quality issues. The document can be accessed here.

  I hope this helps.

• My HP psc 1110 does not print colors when I use the shortcut keyboard F12 key to print. considering that it is p

  I just bought printer HP psc 1110 and despite I loaded the print from the HP website driver and together it up correctly, it has new ink cartridges, it does not print color to color text pages when I use the the keyboard F12 shortcut key to show.  I have the microsoft intelli wireless keyboard.  Although that it prints very well in color while I use the method of dialogue of the system either by pressing "Ctrl + Shift + P" keys together.   I have another canon printer canon pixma 1500 a former model, even this canon allows to print in color using one of the methods above to print.  I'm curious to know why HP is behaving as it is with me.  Can someone knowledgeable enough to enlighten us on this issue and help me on this problem, please.  I would be grateful if someone can send me a response.

  My email is: {deleted personal information}

  Naseer Malik

  Hi Ngoyi-Malik,

  OK, when you right click and select print work properly?

  If you come to open a different document in your Word and press Crtl P it prints correctly?

  The question seems that it is related to the program that you use for your missions. You may need to continue to press the Maj LTRC P in order to get the color to print from this application program. Let me know if the Word printing works well?

• My Deskjet 3520 does not print envelopes. None of the proposed solutions work.

  My DEskjet 3520 does not print envelopes.  I tried all the solutions, and none of them work.  My operating system is Windows XP Professional SP 3.  The computer is a Dell inspiron 530.   There is noe error messages.  When the envelope comes out of the printer, it is empty.  When an 8.5 x 11 piece of paper is in the printer, the address information prints on the right edge of the paper in landscape format.

  My conclusion is that there is a serious error in the software.

  If there is any workaround I would be grateful to receive them.

  Charlie Wingo

  I simply "duped" the copier and formatted the envelope to print in the center of an 8 1/2 X 11 inch paper landscape page.  It took a few violins, but I've got envelopes printing.

• HP Deskjet 990cxi does not print color

  HP Deskjet 990cxi had for many years with no problems.  Once the color has begun to come out in pink, I replaced the cartridge from the printer and now it does not print in black and faded rose.  I replaced the cartridge with an another new and still the same results.

  Can someone help and let me know what I need to do?

  Hello LoBaan,

  Welcome to the Forums of HP Support! I see that you are not able to print in color on your HP Deskjet 990cxi, you replaced the cartridges without success. I would like that you start here: lack of color, wrong color or cast in print, follow these steps to resolve the problem you are experiencing.

  Let me know the results, I'll watch for your reply.

  Thank you

• HP deskjet 960C does not print color

  My printer goldie oldie suddenly decided to not print color since I plugged my new MacBook Pro.  When I used my old laptop from Apple, there is no problem.  I downloaded the driver (I hope that the right one) and replace the color cartridge.  What I am doing wrong?  Any ideas?

  WoooWhoo!

  I am happy to help and thank you for being a teacher. It's hard work, but so important.

  As the person who started this thread, you may have marked it solved by clicking to the right of your response, I think.

• my hp deskjet 5740 does not print more of my change of ink cartridges.

  Today, I changed the ink in my HP Deskjet 5740 printer cartridges; I can't go to my printer.  Someone knows why?

  janisleona,

  What operating system do you use? You get errors when you try to print? What application you are printing from?

• Printer problem - after changing the cartridge, I get a message that the USB cable is not connected

  As above. I checked the USB port and it is connected.

  Original title: printer problem. After changing the cartridge, I get a message that the USB cable is not connected?

  Hello

  1. you receive an error message/code when you try to print?

  2. What is the serial number and model of the printer?
   
  Follow the steps.
   
  Method 1
  Run the hardware and devices Troubleshooter
  This utility checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also run convenience store Print that would help us diagnose the problem better
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2

  (a) check the physical connection of the printer and make sure that the USB cable is properly plugged.

  (b) connect the printer to a different USB port and check if it helps.

  (c) check the on another computer.

  Method 3

  Run the fix - it tool from the link.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 4
  If the previous step fails, follow the steps described in the following link:
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
   
  Let us know if it helps.

• HP DeskJet 930C does not print after replacing cartrdiges

  After changing the cartridge cartridge alignment page and black ink, the printer goes through all the motions of printing but puts a completely blank page.  I also changed the color cartridge and aligned with absolutely nothing on the alignment page.  Tried to print a test page with the same results.  Cleaned contacts on cartridges black and color and the cartridge door, nothing is.  Yet once, replaced both black and color with new cartridges at the same time, see printer to print an alignment page, but new book out completely blank with no ink on this subject.

  I uninstalled the printer and software, the shutdown and restarted the computer, downloaded the program hp deskjet 930C series v4.3 with drivers and get exactly the same thing.  The ink cartridges are a few years old, it is possible, they do not have a long life expectancy?  All four 4 was HP black and color cartridges of origin that had never been opened up to this that placed in the printer.  After the HP Toolbox, the two cartrdiges are 90%.

  This printer has worked fine for years and now I'm very frustrated that it won't work after re [; acomg ink cartridges.  Looking for suggestions on what to try next before you consider replacing the printer.

  The cartridges have a lifetime, although typical for the color cartridges expired or faulty cyan or yellow failures, it would be unusual for the three colors to fail.  You can check the dates of the cartridge as shown in this page.

  You could check that the problem is the cartridge by removing the cartridges and gently pat dry the printhead on a damp cloth.  Good cartrdiges will give a strong ray of cyan, magenta and yellow for the #78 and two strong bands of black for the #45.  If the cartridges do not give a strong stain (or have no job at all) a fresh replacement cartridge may solve your problem.  You may be able to recover an old cartrdige dipping of the cartridge down to about 1 "of very hot water for about ten minutes.

  If the cartridges give a strong stain on the fabric, but nothing on the page, then it is possible there is an electrical problem with the electronic control unit of printer.  It would be uneconomical to repair.

• HP deskjet 5440 does not print images in a word document

  HP deskjet 5440 does not print images in a word document. Using Windows 7 Ultimate 32 bit.

  No problem.

• I have HP E809a Officejet of 7000 series, my printer does not print color but black

  I installed the new ink, but the printer does not print color but black. When I do trobleshooting he information I get is all works well.

  Assuming that you have installed the printer using the HP cd or the installation software full on HP site review the HP print settings/diagnosis and test the printing options, or help from HP, all available from the HP shortcuts installed with their software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=UK&DLC=&sw_lang=&product=3883002